59725074 Imran Resume

5
Mohammed Imran Khan [email protected] Ph No: 9741569999 OBJECTIVE Aspiring for a challenging job wherein my qualification and acquired technical skills are put to best use providing me an opportunity to grow professionally to my full potential, also where I can contribute significantly for my employer. PROFILE 1.5 Years of experience in Embedded Hardware Domain. Hardware testing of 8 bit and 16 bit microcontroller. Experience on mixed signal design and analog design. Hands of experience in handling I 2 C, SPI,CAN , RS232 & 485 protocols. Hands on experience in dealing with ADC interfacing (Analog to Digital Converter), Digital I/O, op-amps, power supply (linear & SMPS), Transformers (PT), Current transformer (CT). Experience in usage of various Oscilloscope, Multimeter, and Function Generators Good knowledge in interfacing of various sensors like temperature, relative humidity, pressure . Knowledge on Hw/Sw integration Test. White box and Black box testing and verification of the system. Board designing, board bringing up, board debugging using Orcad . Participated and Contributed to the design and requirements phase using LTSPICE tool Good Knowledge in EMC/EMI standards and tests Analyse and find the root cause of the problems and finding a way to anticipate it in future with minimal changes without affecting much in the process cycle. SKILLS Languages C, VHDL,ASICS Designs

description

details

Transcript of 59725074 Imran Resume

Page 1: 59725074 Imran Resume

Mohammed Imran [email protected]

Ph No: 9741569999

OBJECTIVE

Aspiring for a challenging job wherein my qualification and acquired technical skills are put to best use providing me an opportunity to grow professionally to my full potential, also where I can contribute significantly for my employer.

PROFILE

1.5 Years of experience in Embedded Hardware Domain.

Hardware testing of 8 bit and 16 bit microcontroller.

Experience on mixed signal design and analog design.

Hands of experience in handling I2C, SPI,CAN , RS232 & 485 protocols.

Hands on experience in dealing with ADC interfacing (Analog to Digital

Converter), Digital I/O, op-amps, power supply (linear & SMPS),

Transformers (PT), Current transformer (CT).

Experience in usage of various Oscilloscope, Multimeter, and Function

Generators

Good knowledge in interfacing of various sensors like temperature, relative

humidity, pressure .

Knowledge on Hw/Sw integration Test.

White box and Black box testing and verification of the system.

Board designing, board bringing up, board debugging using Orcad .

Participated and Contributed to the design and requirements phase using

LTSPICE tool

Good Knowledge in EMC/EMI standards and tests

Analyse and find the root cause of the problems and finding a way to

anticipate it in future with minimal changes without affecting much in the

process cycle.

SKILLS

Languages C, VHDL,ASICS Designs

Page 2: 59725074 Imran Resume

Tools Orcad, PSpice, Kiel, Quartus II,ModelSim, Nios II, SOPC Builder

Operating System MS windows 98/2000/XP

Communication Protocols I2C, SPI, CAN, RS485, RS232

microcontroller (8/16/32 bit) 8051, PIC, ARM

ACADAMIC DETAILSYear Examination Institution /Board/University

2005-2008

B.E. (Telecommunica

tion)

CMR Institute of Technology, Bangalore - Visvesvaraya Technological University

2002-2005

Diploma

(E&C)

OXFORD Polytechnic, Bangalore

Karnataka Board

2002 10th

Kendriya Vidyalaya D.R.D.O

C.V Raman Nagar.Bangalore

CBSE Board

CAREER CONTOUR

CURRENT WORK EXPERIENCECompany Name : GE MEDICAL SYSTEMS JFWTC BANGALORE Designation : Trainee Engineer – Vascular Hardware labWork Experience : 06 July 2009 to 06 July 2010Responsibilities :

Hardware Testing and Verification: Core

Underwent a training on VHDL with Altera based FPGA’s.

Involved in hardware testing, debugging ,verification & validation.

Performed reliability tests HALT (Highly Accelerated Life Test) and HAST

(Highly Accelerated Stress Test) for motion controller unit.

Involved in Stop Distance measurement of Elegance table.

Involved in specializing the Vascular Hardware full system, which is used in

cath lab operations.

Hardware debugging skills and testing.

Usage of oscilloscope, logic analyzer,Function generator,Multimeter for

testing of Digital and analog circuits.

Page 3: 59725074 Imran Resume

Involved in system testing.

Testing noise level in the circuits.Developing test circuit for individual component and ensuring the component meets the provided spec.(developing the circuit in general purpose pcb or on bread board)

PAST WORK EXPERIENCECompany Name : ADE(Aeronautical Development Establishment)Designation : Technical AssistantWork Experience : 2 feb 2009 to 08 June 2009 (4-5 months) Relevant : hardware testing

Responsibilities : Hardware testing ,verification hardware development of Aerospace

product(GIMBAL) : • Ensure that the design and development of hardware and firmware

working and meeting the spec in various test condition. • Testing digital and analog circuits and ensuring the pcb to design is

isolated between high voltage ground and low voltage.

• Knowledge of Aerospace standards such as Do178b,RTRT,Cantata .

• Knowledge on Test Environment set up while going on trials.

• Developing test circuit for individual component and ensuring the component meets the provided spec.(developing the circuit in general purpose pcb or on bread board)

• To provide the demos in different stages of design and development for getting the feedback/inputs to improve the product in terms of quality, reliability, features and etc.

• Ensure that verification of the project/Product is completed without bugs.

New initiatives:

• Ensuring that continuous improvements are always taking place in the form of new initiatives in new developments

Support and Coordination:

• To Coordinate with intra functional & team members for the design clarifications.

• Coordinating to intra and inter functions to release the project/Product in time.

Academic Projects:

1) B.E ProjectTitle: Power Over Ethernet

Organization: Electronics & Radar Development Establishment, DRDO, Bangalore

Brief Description:

Page 4: 59725074 Imran Resume

Power over Ethernet (PoE) is a technology for wired Ethernet LAN that allows the electrical current, necessary for the operation of each device, to be carried by the data cables rather than by power cords. This minimizes the number of wires that must be strung in order to install the network. The result is lower cost, less downtime, easier maintenance, and greater installation flexibility than with traditional wiring. For PoE to work, the electrical current must go into the data cable at the power-supply end, and come out at the device end, in such a way that the current is kept separate from the data signal so that neither interferes with the other. The current enters the cable by means of a component called an injector. If the device at the other end of the cable is PoE compatible, then that device will function properly without modification. If the device is not PoE compatible, then a component called a picker or tap must be installed to remove the current from the cable. This "picked-off" current is routed to the power jack.

Role involved: SOCKET PROGRAMMING

This Project involved socket programming in C/C++ basically to establish a wired connection between Client and Server pc.Our role was to program the client and server model so that there can be a transfer of data between the two within the defined packet using a simple Ethernet cable.

2) Diploma ProjectTitle: Development of an 8051 Microcontroller Board.

Organization: Caravel Info Systems, Bangalore

Brief Description:

The objective of the project is to develop an 8051 Microcontroller board for programming, testing and verification of various applications.

Role involved: MICROCONTROLLER BASED DATA ACQUISITION SYSTEM

The novel idea was to capture data from outside world using a 4*4 keyboard interfaced with a microcontroller, display the acquired data in a LCD display and stored the data. It can be connected to a PC so storing values and monitoring is much easier. Our role in the project was to design an 8051 based microcontroller board interfacing the 4*4 keyboard, LCD and few other peripherals. After the completion of the design program the microcontroller accordingly to perform the specific task.

3) Mini Project – 2Title: Digital Heart Beat Counter

Brief Description:

This is a simple digital heart beat counter implemented without any microcontroller or microprocessor. It consists of a threshold detector circuitry to extract the R-wave of an ECG and decade counter ICs that count these pulses for a certain period of time and display the count on 7-segment displays.

Page 5: 59725074 Imran Resume

PERSONAL DETAILS

Name : Imran Khan

Date of Birth : 17/01/1986

Languages Known : English, Hindi and Kannada, Urdu.

Address : #401A, Saptagiri Maharishi Appartment,

Nagwar Palya,C.V Raman Nagar Post Bangalore-93