5880100 Full
description
Transcript of 5880100 Full
5880100
www.jaybeamwire less.com
DT
5342
- E
d C
- pa
ge 1
/2
- W
e re
serv
e th
e rig
hts
to m
odify
our
pro
duct
s w
ithou
t prio
r not
ice.
880-960 / 1710-2170 / 1710-2170 MHz
Model number options: 5880100 Manual Electrical tilt Antenna 5880000 Remote Electrical Tilt Antenna (AISG1.1) 5880000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)
Electrical Specifications Low Band High Band 1 High Band 2 Frequency Band 880 - 960 MHz 1710 - 2170 MHz 1710 - 2170 MHz Gain 17.5 dBi 17.3 dBi 17.3 dBi Input Impedance 50 ohms 50 ohms 50 ohms
VSWR <1.4 <1.4 <1.4 Polarisation ±45° ±45° ±45° Horizontal Beamwidth (-3 dB) 65° 64° 64° Vertical Beamwidth (-3 dB) 7° 7° 7° Electrical Downtilt 0° - 10° Variable 0° - 12° Variable 0° - 12° Variable Isolation between ports >30 dB >30 dB >30 dB Isolation between bands 45 dB typ. 45 dB typ. 45 dB typ. Upper Sidelobe Rejection
(20° sector above main beam) 18 dB typ. 18 dB typ. 18 dB typ.
Front to back ratio >30 dB >30 dB >30 dB Maximum Power (per port) 200 W 160 W 160 W Intermodulation
3rd order for 2 x 20 W carriers <-110 dBm <-110 dBm <-110 dBm
Connector Type / Location 6 x 7/16 DIN Female "Long & Ultralong Neck" / Bottom Remote Control of the Electrical Downtilt
The remote control of the electrical tilt is managed by a module totally inserted at the bottom of the antenna. One single module controls individually the tilt of each band. This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible and the antenna still has manual tilt control (manual override).
RET module part number MDCU-A0002 compliant to AISG1.1 MDCU-G0002 compliant to 3GPP/AISG2.0
Environmental Operating Temperature Range -40°C to +60ºC Environmental ETS 300 019 RoHS compliant Yes Mechanical Dimensions Height: 2690 mm Width: 253 mm Depth: 147 mm Weight 27.5 kg (excluding mounting accessory) Material Shroud: outdoor plastic, RAL7035
Housing: aluminium Operational Wind Speed 160 km/h Survival Wind Speed 200 km/h Wind load at 160 km/h 600 N Mounting Kit Options (These installation accessories must be ordered separately)
Description Part number Weight
Brackets for pole 48 to 115 mm 0900393/00 5.1 kg Brackets for pole 70 to 150 mm 0900501/00 5.8 kg Kit to add mechanical tilt (0° to 9.5°) to above brackets 0900394/00 3.1 kg Wall mounting brackets with azimuth pan 0900395/00 2.3 kg Wall mounting brackets with mechanical tilt and azimuth pan 0900533/00 4.4 kg
XXXpol / 65° Az17.5 / 17.3 / 17.3 dBi
• Triple Band Antenna, 6 connectors • Independent tilt on each band 0°-10° / 0°-12° / 0°-12° • Slimline profile for low wind load • MET and RET versions, AISG1.1 or 3GPP/AISG2.0 • Single RET module to control all tilt angles
5880100
www.jaybeamwire less.com
DT
5342
- E
d C
- pa
ge 2
/2
- W
e re
serv
e th
e rig
hts
to m
odify
our
pro
duct
s w
ithou
t prio
r not
ice.
880-960 / 1710-2170 / 1710-2170 MHz
Bottom of the antenna
with RET module in place
Mechanical (All dimensions are in mm)
Always attach the antenna by its 3 mounting points. Do not install the antenna with the connectors facing upward.
Conforme Original du2007-11-05 08:56:40
INTERFACE ET EMCOMBREMENT
Chemin du Roy,ZI La boitardiere,37400 Amboise
Visa.resp.EVOLUTION
Ce document est la propriété de la société JAYBEAMWireless,il ne peut être reproduit, ni communiqué à des tierssans autorisation écrite d'une personne mandatée spécialement à cet effet par ladite société.
FEUILLEINDICETYPE
NUMERO DE DOCUMENTTITRE:
TOLE.GENE: ±0,2ECHELLE:
ResponsableDateCrée parInd.DEP
Création00-Visa.resp.EVOLUTION
FEUILLEINDICETYPERACINE
NUMERO DE DOCUMENTTITRE:
TOLE.GENE: ±0,2ECHELLE:
ResponsableDateCrée parInd.DEP
Création
A3
23/10/2007GIRARD PALLONE
00
1:10Antenne Tri-bande 5880100 GSM
0-10° DCS-UMTS Bleu 0-12° DCS-UMTS Blanc 0-12° C0995-041-00
260.00
151.
50
60.00 ±0.20
60.00 ±0.20 60.00 ±0.20
31.0
0±0
.20
95.8
±0.2
50.5
±0.2
139.65 ±0.20
77.0
±0.2
69.00 ±0.20
A
28.5
0±0
.50
62.50 ±0.50
1180.0 ±2.0
2425.00 ±3.00
62.50 ±0.509.00
62.50 ±0.5014
6.9
Radome Styrosun RAL 7035 (Gris claire)
2688 ±510
5.00
±0.5
0
78 max
27 m
ax
253.
0Patte de fixationen acier galvanisé
Tube protecteur de barre de tilt
Etiquette d'identification
DÉTAIL A ECHELLE 1 : 4
Connecteurs 7/16 long neck
Carte pilotage RET éléctrique( extractible)
Etiquette identification bande de frequence
1/1
-- ---
Poids : 27.5 Kgs