5862152-B-AMG 0355CC04 Technical specification · Document identification Lang. Rev. ind. Sheet ABB...

We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden. Copyright 2012 ABB

Prep. RA.JI 14.5.2012 TECHNICAL SPECIFICATION No. of sh.

Appr. TU.TU 24.5.2012 13 Resp. dept. R&D Document identification Lang. Rev. ind. Sheet

ABB Generators Ltd. 8AMG 5862152 en B 1 TEMPLATE: TECHNICALSPECIFICATION.DOT; FILENAME: 5862152-B-AMG 0355CC04 TECHNICAL SPECIFICATION.DOC; PRINTDATE: 5/31/2012 1:26:00 PM; SAVEDATE: 5/30/2012 12:08:00 PM

TECHNICAL SPECIFICATION Type designation:

AMG 0355CC04

Application: Diesel/Gas engine Industrial Application Series

Site criteria: Land use

NOTES

CONTENTS

SECTION:

1� PERFORMANCE DATA (Calculated values) 2�

2� PERFORMANCE CURVES 3�

3� CONFIGURATION AND SCOPE OF SUPPLY 8�

4� ACCESSORIES 11�

5� DIMENSIONS 12�

*Type definition: AMG0355CC04 DBSI IC/IP combination Bearing type Excitation type Industrial generators Bearing type: A-Double bearing, B-Single bearing Excitation type: S-Shunt, A-Auxiliary winding, P-PMG

Document identification Lang. Rev. ind. Sheet


1 PERFORMANCE DATA (Calculated values) TYPE Type designation: AMG 0355CC04

PERFORMANCE DATA Main standard IEC 60034 Rated power factor 0.8 Insulation class H Temperature rise H Ambient temperature 40 °C Altitude over sea level ≤ 1000 m Cooling/Protection IC0A1/IP23 Single bearing Double bearing Mounting arrangement IM 2105 IM 1001 Weight without/with PMG 1610/1635 kg 1650/1670 kg Inertia without/with PMG 11.80/11.81 kgm2 11.44/11.45 kgm2 Direction of rotation CW (Facing drive end) Maximum overspeed 2250 rpm Winding pitch Two thirds (2/3) Stator winding resistance 0.00374 � per phase at 20 series star connection Rotor winging resistance 2.190 � at 20 Ex. stator winding resistance 15.16 � at 20 Ex. rotor winding resistance 0.157 � at 20 Total Harmonic Distortion At no load<2.5%, at rated Linear balanced load <5% Voltage regulation ±1 % Frequency THF<2% TIF<50 Telephone Interference 50 Hz 60 Hz Speed 1500 rpm 1800 rpm Cooling Air 0.70 m³/sec 0.84 m³/sec Voltage series star 3ph. 380/220 400/231 415/240 440/254 415/240 440/254 460/266 480/277 Voltage parallel star 3ph. 190/110 200/115 208/120 220/127 208/120 220/127 230/133 240/138 Voltage series delta 3ph. 220 230 240 254 240 254 266 277 Voltage parallel delta 3ph. 110 115 120 127 120 127 133 138

Xd(u) 3.802 3.614 3.358 2.684 4.263 4.026 3.850 3.689 Xd(s) 2.759 2.381 2.017 1.309 3.422 3.070 2.760 2.430 Xq(u) 1.766 1.679 1.560 1.247 1.981 1.871 1.789 1.714 X'd(u) 0.252 0.240 0.223 0.178 0.283 0.267 0.255 0.245 X'd(s) 0.229 0.218 0.203 0.162 0.257 0.243 0.232 0.223 X''d(u) 0.166 0.157 0.145 0.113 0.188 0.176 0.168 0.160 X''d(s) 0.151 0.143 0.132 0.103 0.171 0.160 0.153 0.145 X''q(u) 0.183 0.174 0.162 0.129 0.205 0.194 0.186 0.178 X''q(s) 0.167 0.158 0.147 0.118 0.187 0.176 0.169 0.162 X1(u) 0.077 0.073 0.068 0.054 0.087 0.082 0.078 0.075 X2(u) 0.175 0.166 0.153 0.121 0.197 0.185 0.177 0.169 X2(s) 0.159 0.151 0.140 0.110 0.179 0.168 0.161 0.154 X0(u) 0.025 0.023 0.022 0.017 0.028 0.026 0.025 0.024 Xp(s) 0.189 0.180 0.167 0.134 0.212 0.200 0.191 0.184

SCR (short circuit ratio), Ir0/Xd (u) 0.36 0.42 0.50 0.76 0.29 0.33 0.36 0.41 s=saturated value, u=unsaturated value, values are p.u. at rated voltage and power

Td0' 4.082 s Td' 0.170 s Td'' 0.0142 s Ta 0.0276 s

CE-Marking Generator fulfills the requirements of Low Voltage Directive (2006/95/EC) Generator supplied to EEA-area will be CE-marked



2 PERFORMANCE CURVES

THREE PHASE EFFICIENCY CURVES, 50 Hz/380–440 V

95.8296.01

96.2796.4096.5096.46

96.05

95.23

94.4394.68

95.0295.1995.3395.29

94.80

93.80

92.00

93.25

94.50

95.75

97.00

0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10

Eff

icie

ncy

[%]

S [p.u]

380V / 50Hz / 655kVA

P.F.

1.0

0.8

95.9296.10

96.3396.4496.5196.45

96.00

95.13

94.4594.71

95.0395.2095.3095.24

94.70

93.66

92.00

93.25

94.50

95.75

97.00

0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10

Eff

icie

ncy

[%

]

S [p.u]

400V / 50Hz / 690kVA

P.F.

1.0

0.8

96.0496.20

96.3996.4896.5096.40

95.87

94.91

94.5494.76

95.0495.1895.2595.14

94.50

93.35

92.00

93.25

94.50

95.75

97.00

0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10

Eff

icie

ncy

[%

]

S [p.u]

415V / 50Hz / 690kVA

P.F.

1.0

0.8

96.2996.3896.4696.4696.3396.09

95.27

93.99

94.7594.8995.0395.0594.9294.65

93.68

92.15

92.00

93.25

94.50

95.75

97.00

0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10

Eff

icie

ncy

[%]

S [p.u]

440V / 50Hz / 620kVA

P.F.

1.0

0.8



THREE PHASE EFFICIENCY CURVES, 60 Hz/415–480 V

95.9896.15

96.3796.4796.5396.45

95.97

95.0794.76

94.9795.2595.3895.4695.36

94.77

93.68

92.00

93.25

94.50

95.75

97.00

0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10

Eff

icie

ncy

[%

]

S [p.u]

415V / 60Hz / 7300kVA

P.F.

1.0

0.8

96.1296.27

96.4696.5596.5896.48

95.96

95.03 94.8995.09

95.3495.4695.5095.39

94.76

93.62

92.00

93.25

94.50

95.75

97.00

0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10

Eff

icie

ncy

[%

]

S [p.u]

440V / 60Hz / 775kVA

P.F.

1.0

0.8

96.2196.3596.5396.6096.6196.49

95.94

94.98 94.9695.15

95.3895.4995.5195.38

94.71

93.54

92.00

93.25

94.50

95.75

97.00

0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10

Eff

icie

ncy

[%]

S [p.u]

460V / 60Hz / 810kVA

P.F.

1.0

0.8

96.2896.4196.5796.6396.6196.48

95.90

94.90 94.9795.16

95.4095.4995.4995.34

94.34

93.43

92.50

93.75

95.00

96.25

97.50

0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10

Effi

cien

cy [

%]

S [p.u]

480V / 60Hz / 845kVAP.F.

1.0

0.8



TRANSIENT VOLTAGE REGULATION CURVES

Load application (Shunt excitation):

400V / 50Hz / 0.8 P.F.

0

5

10

15

20

25

0.00 0.15 0.30 0.45 0.60 0.75 0.90 1.05 1.20 1.35 1.50

S [p.u]

Vo

ltag

e d

ip [

%]

480V / 60Hz / 0.8 P.F.

0

5

10

15

20

25

0.00 0.15 0.30 0.45 0.60 0.75 0.90 1.05 1.20 1.35 1.50

S [p.u]

Vo

ltag

e d

ip [

%]

Load application (Auxiliary winding or PMG excitation):

400V / 50Hz / 0.8 P.F.

0

5

10

15

20

25

0.00 0.15 0.30 0.45 0.60 0.75 0.90 1.05 1.20 1.35 1.50

S [p.u]

Vo

ltag

e d

ip [

%]

480V / 60Hz / 0.8 P.F.

0

5

10

15

20

25

0.00 0.15 0.30 0.45 0.60 0.75 0.90 1.05 1.20 1.35 1.50

S [p.u]

Vo

ltag

e d

ip [

%]

Load rejection (Shunt excitation):

400V / 50Hz / 0.8 P.F.

0

5

10

15

20

25

30

35

0.00 0.15 0.30 0.45 0.60 0.75 0.90 1.05 1.20 1.35 1.50

S [p.u]

Vo

ltag

e ri

se [

%]

480V / 60Hz / 0.8 P.F.

0

5

10

15

20

25

30

35

0.00 0.15 0.30 0.45 0.60 0.75 0.90 1.05 1.20 1.35 1.50

S [p.u]

Vo

ltag

e ri

se [

%]



TRANSIENT VOLTAGE REGULATION CURVES

Load rejection (Auxiliary winding or PMG excitation):

400V / 50Hz / 0.8 P.F.

0

5

10

15

20

25

30

35

0.00 0.15 0.30 0.45 0.60 0.75 0.90 1.05 1.20 1.35 1.50

S [p.u]

Vo

ltag

e ri

se [

%]

480V / 60Hz / 0.8 P.F.

0

5

10

15

20

25

30

35

0.00 0.15 0.30 0.45 0.60 0.75 0.90 1.05 1.20 1.35 1.50

S [p.u]

Vo

ltag

e ri

se [

%]

Locked Rotor Motor Starting Curve (Shunt excitation):

Locked Rotor Motor Starting Curve (Auxiliary winding or PMG excitation):

Note1

S [P.U] =S/S(Rated), S stands for the actual operation capacity, S(Rated) stands for the generator rated output capacity.

400V / 50Hz

0

5

10

15

20

25

30

0.00 0.30 0.60 0.90 1.20 1.50 1.80 2.10 2.40 2.70 3.00 S [p.u]

Vol

tage

dip

[%]

480V / 60Hz

0

5

10

15

20

25

30

0.00 0.30 0.60 0.90 1.20 1.50 1.80 2.10 2.40 2.70 3.00 S [p.u]

Vol

tage

dip

[%]

480V / 60Hz.

0

5

10

15

20

25

30

0.00 0.30 0.60 0.90 1.20 1.50 1.80 2.10 2.40 2.70 3.00 S [p.u]

Vol

tage

dip

[%]

400V / 50Hz

0

5

10

15

20

25

30

0.00 0.30 0.60 0.90 1.20 1.50 1.80 2.10 2.40 2.70 3.00 S [p.u]

Vol

tage

dip

[%]



THREE PHASE SHORT-CIRCUIT CURVES (At no-load and rated speed, base on star connection)

Note2 Curves are for star connection. For other connection, please use following multiplication factors: Series delta: Current values x 1.732 Parallel star: Current values x 2 Curves are for 3-phase short-circuit. For other types of short-circuit, please use following multiplication factors: Instantaneous Continuous Maximum duration 3-phase 1 1 10 sec.

2-phase L/L 0.87 1.5 5 sec. 1-phase L/N 1.3 2.2 2 sec.

50Hz

60Hz



3 CONFIGURATION AND SCOPE OF SUPPLY GENERAL The generator is designed to operate together with a diesel or gas engine.

CONSTRUCTION The stator frame is a rigid welded steel structure construction. The stator core is built of thin electric

sheet steel laminations which are insulated on both sides with heat-resistant inorganic resin.

The rotor consists of a shaft and a star shape rotor core. The shaft is machined of rolled steel. Special heat treatment is used if shaft operates under heavy conditions. The poles are manufactured of 0.5 mm sheet steel. The pole laminations are pressed and welded together with steel bars. These bars are then welded to the end plates. Rotor balancing is done acc. to ISO 1940/1. The standard balancing quality grade is G2.5.

All windings are completely vacuum pressure impregnated with high quality resin. The windings are provided with very strong bracing which withstands all expected mechanical and electrical shocks and vibrations as well as chemicals.

End shields are made of casted steel, The stator frame and stator core are welded together, and bolted with end shields.

MAIN TERMINAL SPACE Protection class IP44, Integrated into the top module of the generator.

Supply cable entries: Closed terminal box. Cable inlet to the main terminal box to be done by the customer.

Twelve (12) leads T1 – T12 brought into the terminal box to enable internal series star, parallel star, series delta and parallel delta connection, Main terminals U, V, W and neutral point N in the main terminal box for external connection

Terminal marking acc. to IEC.

Designed for continuous current load.

FOUNDATION The machine can be mounted using shimming, machined blocks, chock fast or on grouted sole plates

or bed plate. Before using other mountings, contact us.

CONTROL SYSTEMS General

Brushless excitation.

Automatic Voltage Regulator System Mounted inside the main terminal box.

Analog type AVR.

Functions: a) 1-channel AVR. b) Excitation power can be from phase voltage of main terminal or auxiliary winding, PMG. c) Voltage set-point adjustment (local). d) U/f limiter. e) Parallel operation.



Static voltage regulation accuracy +/- 1.0 %.

Voltage recovery time after transient<1.5 s, +/- 3.0 % (acc. to IEC 60034).

Nominal Um, range: < 90 VDC at 110 VAC input, 170 VDC at 220 VAC input.

Nominal Im, range: continuous 5 ADC.

BEARINGS Non Drive-end: Rolling, sealed, free. Drive-end: Rolling, re-grease, locked.(Double bearing)

Not electrically insulated.

Maximum bearing temperature 90 °C at ambient 40°C.

TESTING Testing is according to IEC and ABB internal requirements. The test may be observed by the customer

without extra charges. The test procedures are described in the following documents which are available on request:

-Routine tests: MDD 8006327 (for all machines). -Type tests: MDD 8006328 (optional, to be agreed separately). -Special tests: MDD 8006329 (optional, to be agreed separately).

PERFORMANCE CHARACTERISTICS AND OPERATIONAL LIMITS Rating for continuous running duty:

Duty type S1.

Rating for short-time duty: 10 % overload at nominal power factor for one hour at twelve hour intervals.

Overcurrent withstand capability: 1.5 times nominal current for 2 minutes.

Sustained short-circuit current: More than 3 times nominal current for 10 seconds.

Generator shall be suitable for supplying circuits which, when supplied by a system of balanced and sinusoidal voltages:

Result in currents not exceeding a harmonic current factor of 0,05 and

Result in a system of currents where neither the negative-sequence component nor the zero-sequence component exceed 5% of the positive-sequence component

Maximum voltage unbalance is 0.5 %.

Maximum I2/IN value for continuous operation is 8 %.

Maximum (I2/IN)2 x t in seconds for operation under fault conditions is 20

Maximum continuous voltage variation with rated output is ±5 %.

Maximum continuous frequency variation with rated output is ±2 %.

Maximum combined voltage and frequency variation and maximum short-time limits are acc. To IEC 60034-1:2004, Section 7.3.

Electromagnetic Compatibility (EMC)

Radiated and conducted emissions comply with the requirements of CISPR 11, Class B, Group 1, Table B.1. (IEC 60034-1, Annex B).



TOLERANCES Efficiency �

Machines up to and including 150 kW (or kVA) –15 % of (1–�)

Machines above 150 kW (or kVA) –10 % of (1–�)

Total losses (applicable to machines with ratings >150 kW or kVA)

+10 % of the total losses

Peak value of short-circuit current under specified conditions

±30 % of the value in the technical specification

Steady short-circuit current at specified excitation ±15 % of the value in the technical specification

Moment of inertia ±10 % of the value in the technical specification

SURFACE TREATMENT Grade: C2, Standard color

Surface treatment C2 according to the ISO 12944 standard, for standard industrial environment.



4 ACCESSORIES OPTIONAL ACCESSORIES No pc/pcs Item Note

2 Anti-condensation heater

1 Current transformer For parallel operation with other generators

6 PT100 for stator winding

1 PTC sensor (triple)

1 PMG



5 DIMENSIONS MAIN DIMENSIONS

Single bearing Double bearing

Flange dimensions (mm)

S.A.E AK AJ BD BF n a

1 511.18 530.2 708 12.7 12 15�

1/2 584.2 619.25 708 14 12 15

�

0 647.7 679.45 708 14 16 11.25

�

Flex disc dimensions (mm)

S.A.E BX P AH Y m

111/2 352.43 333.38 39.6 11 8 14 466.6 438.1 25.4 13.5 8 18 571.5 542.9 15.7 18 6



ROTOR DRAWINGS

Single bearing

��

� � � � ��

�� !� �"� �� !� � �� ! �� #��

�� !�� "�� !� �"� �� !� � �� ! �� #��

$%�&'%�(� �)* $�� +�,( -.(.��/��(�� &/�(�� 0.(�%�-.(�� 0.�1�.��%�1(�,,��11

Double bearing

��

��

�� !��" �"�� ! ! �!� �"� �� "� � �� ! �� " �� #��

0.�1�.��%�1(�,,��11$�� +�,( -.(.��/��(�� &/�(�� 0.(�%�-.(��

5862152-B-AMG 0355CC04 Technical specification · Document identification Lang. Rev. ind. Sheet ABB...

Documents

Transcript of 5862152-B-AMG 0355CC04 Technical specification · Document identification Lang. Rev. ind. Sheet ABB...