5555-83-FireCatalog-06

Protection and Tools for the Firefighter

2006–2007 FIRE SERVICE CATALOG

Customer Service Center: 1-877-MSA-FIRE • Website: www.MSAFire.com • QuickLit Fax Information: 1-800-672-90102

FIRE SERVICE PRODUCTS

Our people set us apart from the competition

Your MSA SCBA are manufactured inside MSA ’s Murrysville manufacturingfacility, which Industry Week magazinenamed one of the best manufacturingplants in North America and Europe in2000. This award is based on perform-ance metrics and practices in categoriessuch as benchmarking, customer andsupplier relations, employee involvement,manufacturing operations, and use oftechnology.

Assistance is everywhere you look

Your personalized service starts locally with your trained MSA-authorized distributor and MSA ’s specialized field representatives. If you need to locate your nearest MSA Fire Service Distributor, or youhave an urgent technical question, our award-winning, dedicated teamof customer service professionals is ready to help you. They understandthe hazards you fight and the regulations that you must comply with.They can be reached at 1-877-MSA-FIRE

From us to you: Better products & services

As your “emergency responder” duties expand, and you are exposed to moredangers, MSA continues to provide more emergency response products thatexceed your expectations and standard requirements.

MSA supports firefighters in countless ways, and recognizes your role as the front line of homeland security. MSA was the first SCBA manufacturer to meet both the NFPA 1981-2002 standards and NIOSH CBRN compliance, and we strive to manufacture products like the FireHawk™ Air Mask to meetyour needs.

We know these standards define what you want in compliant new equipmentand upgrades. Over the past few years, both government grants and privatefunding have increased to make purchasing this much-needed firefightingequipment a reality for thousands of departments of all sizes.

MSA products make your job safer and easier to accomplish. You know thatyou can count on MSA for the most technologically advanced products as well as support, explanations, and training assistance.

We are committed to you

After 92 years of serving firefighters and rescue teams,MSA makes the Fire Serviceour premier focus for productinnovations, improvements,and service.

From our Cairns® Fire Helmets,Evolution® Series ThermalImaging Cameras, and ICM Tx PASS devices to ourFireHawk® SCBA, we offer you the very best in personalprotective equipment. Your options in gas detectioninstruments and fall protection/rescue systems are more numerous and better than ever. We are prepared to equip you at anylevel of protection.

Our mission is YOUR safety!



3

MSA’s FireHawk™ Air Mask is the premier self-contained breathing apparatus for the municipal fire service. Designed with the input ofhundreds of firefighters, and including a multitudeof MSA’s exclusive features, the new FireHawk AirMask truly embodies Safety, Simplicity, andReliability.

Safety

Understanding that “protecting the protector” hasbeen our calling for 90 years, MSA works hard toprovide firefighters with the most safety featuresavailable on any SCBA. Listed here are just a fewof them:

■ MSA’s patented Quick-Fill® System makes everyMSA SCBA capable of both receiving anddonating air to firefighters in need. Although the NFPA standard requires all brands of SCBAto incorporate a receive-only RIC connection,only the MSA Air Mask can make full utilizationof the fitting with our exclusive transfilling capability.

Safety. Simplicity. Reliability.■ An NFPA-compliant emergency egress system,

integral to the SCBA waist belt, is available as an option. This Rescue Belt comes completewith Kevlar line (50 ft. or 75 ft.) and rappellinghardware.

■ The all new Airframe™ carrier and harnesscomes standard, with large side handles and a central attachment point for pulling firefightersto safety in rescue scenarios.

■ MSA’s Ultra Elite® Facepiece is designed with a one-way check valve to prevent againstcross-contamination among firefighters.Although regulators are shared among users,harmful pathogens (SARS, hepatitis, flu virus)are kept within each individual-issue facepiece.

■ Wireless electronics add safety benefits byeliminating snag hazards that can accompany unnecessary wires on an SCBA.

■ CBRN positive protection is provided by MSA’sexclusive Tetraplex™ shield, which serves as the first line of defense in preventing chemicalwarfare agents from initial contact with the critically important second-stage diaphragm.

■ A new flow-control cylinder valve reduces the propulsive thrust of cylinders if they areaccidentally opened without proper restraint.

■ A buddy light on the ICM Tx lets fellow firefighters easily identify a firefighter that is in need of assistance. An additional light,located on the HUD Receiver, lets others knowwhen you are low on air, reinforcing the distinct communication of the Audi-Larm®

warning device.

■ The Heads-Up Display has an automatic dimming feature in low ambient light to protect the visibility of firefighters.

TM

Air Mask



Reliability

Because your life depends on it, your SCBA mustbe reliable. To help ensure continuous reliability of the Air Mask, MSA uses the most progressivedesign, manufacturing, and quality assurancepractices globally available. We also keep youinformed to ensure the continued safe and reliable operation of your MSA Air Mask in thefield. Listed are just a few key contributors to theAir Mask’s historic reliability.

■ In-house manufacturing of nearly every pneumatic, electronic, and structural compo-nent of the Air Mask to ensure optimal quality and performance.

■ Use of the highest quality and grades of stainless steel and aluminum with select blendsof Kevlar, rubber, and plastic molding com-pounds for the highest strength and durability.

■ Teflon hard-coat anodized valve bodies to minimize the friction of internal components and maximize their service life.

■ Electronics designed for ruggedness and immunity to fire ground RFI (radio frequencyinterference). The Air Mask’s electronics mustfirst pass through MSA’s stringent in-house RFItesting chamber to ensure reliable operationbefore you use them.

■ 100% inspection of all Air Mask critical attributes in production.

■ An ISO 9001:2000 certified organization.

■ Responsible maintenance policiescommunicated to users by direct mail and overthe internet, with the appropriate training andtechnical updates to help ensure the continueddependable operation of the Air Mask.

■ A “best-in-class” service network with over2,000 certified repair facilities and a team ofservice specialists, committed to resolving customer issues any time, anywhere, allbacked by a lifetime warranty.

Simplicity

The new FireHawk Air Mask has been designed tobe simple to use and easy to own. Ease of use isaccomplished with more user options than anySCBA on the market. Ease of ownership speaks tothe Air Mask’s low cost of ownership and MSA’slong-standing commitment to providing customerswith the upgrade options they need. Here are just a few examples.

■ An optional swiveling lumbar pad for maximumfreedom of movement and comfort when crawling or climbing.

■ A slide-to-connect or push-to-connect regulatorattachment to meet the widest range of yourpreferences.

■ An integrated shut-off to prevent the loss ofcylinder air when disconnecting the second-stage regulator.

■ An open-form cylinder band to allow rapid drop-in cylinder replacement, eliminating web-bing adjustments and secondary retaining clips.

■ Modular “stand alone” electronic componentsfor easy maintenance, with no wires to routeand no complicated mounting brackets.

■ A power-saving mode on the heads-up display,which is set as a default to maximize batterylife, with a continuous-on mode that can beselected to provide a constant LED display.

■ The optional ICM Tx is a single unit that combines all of the features of the highly-successful ICM 2000® Plus Integrated PASSdevice with the functionality of the Heads-Up-Display (HUD) transmitter. As a single compo-nent of the Air Mask, less space is required onthe firefighter’s chest and the number of typesof batteries used on the Air Mask has been consolidated.

The ICM Tx provides the wearer a digital displayof time remaining in the cylinder based on thefirefighter’s previous three minutes of breathing,battery status, cylinder pressure (both numeri-cally as well as with an icon) and heat alarms.The unit is capable of data logging the last 25 hours of use.

■ A maintenance policy that delivers the lowestpossible cost of ownership, based on the frequency of use of the Air Mask. For manydepartments, this means only conducting anannual flow test according to the NFPA 1852 standard. Even a busy department using onecylinder every other day would find the cost of maintaining an SCBA to be less than $5 per year.

■ State-of-the-art regulator designs that haveamong the fewest number of parts in the industry. The PR-14 regulator has only 14replaceable parts and the Firehawk MMR regulator has just 22! Both regulators can bemaintained without the need of special tools.

■ NFPA and CBRN upgrade kits to help usersmeet the most current performance standards.

Customer Service Center: 1-877-MSA-FIRE • Website: www.MSAFire.com • QuickLit Fax Information: 1-800-672-9010 5

MSA has you protected with the latestenhancements to our FireHawk Air Mask, the fire service’s FIRST NFPA 1981-2002

edition, NIOSH-approved CBRN self-contained breathing apparatus.

MSA’s new FireHawk CBRN SCBA wasdeveloped to provide you with positive protection from CBRN agents, according tothe stringent live-agent test regimen of the NIOSH approval process. Because conventional silicone diaphragms are amongthe SCBA components most vulnerable to CBRN agent permeation, our positive-protection design seals the new diaphragmof the Firehawk® regulator from any initialcontact with contaminants.

The key to this protection are these revolutionary components, which lie within the CBRN version of thesecond-stage regulator:

• MSA’s exclusive Tetraplex™ ProtectiveShield (patent pending). It serves as thefirst line of defense in preventing chemicalwarfare agents from contacting the vital components of the regulator andentering the user’s air stream.

• A permeation-resistant regulatordiaphragm made of a proprietary rubbercompound. It serves as the second line ofdefense in protecting the user’s breathingzone.

• A modified valve core body (the engine ofthe regulator). It supports the new shieldand diaphragm with a high-performanceair-delivery system.

These components, plus one of the industry’sbest-fitting facepieces, MSA’s Ultra Elite®

Facepiece, ensure reliable and effective respiratory protection not only from agentsthat might be used in a terrorist attack, but also from many of the lethal byproductsof combustion that are encountered in everyday firefighting. Chemical plants,nuclear facilities, laboratories, and otherindustries harbor unknown and life-threaten-ing environments that you might have toface. With MSA’s new CBRN FireHawk Air Mask, you can be positive you are protected on every call.

FireHawk™ Air Mask with CBRN Protection

Tetraplex Protective Shield – Patent-pending Tetraplex™

Protective Shield serves as the first line of defense in preventingchemical warfare agents from contacting the vital components of the regulator and entering the user’s air stream.

Firehawk CBRN Diaphragm – A newly designed permeation-resistant regulator diaphragmmade of a proprietary rubber compound that serves as the second line of defense in protecting the user’s breathing zone.

Firehawk High-Performance Valve Core – Modified valve core assembly (the engine of the regulator), sup-porting the new shield and diaphragm with a high-performance air-delivery system.

Firehawk Second-StageRegulator Housing – Color-coded release buttonsfor additional identification ofMSA CBRN regulators.

Firehawk CBRN Cover – Heat and impact-resistant outer protective cover,marked with “CBRN” forimmediate identification.

Neoprene Intermediate Pressure Hose –

Provides enhanced durability and superior resistance to the permeation of chemical warfare

agents. Features a dual swivel design for maximum user mobility.

CBRN Upgrade Kits for MSA Air MasksIt’s Easy to Upgrade!

• CBRN Upgrade Kits will enable the upgrading of NFPA 1981-1997 and 2002

Edition MSA MMR Air Masks.

• Upgrade Kits simply enable the replace-ment of the Air Mask’s existing MMR W-Turn or Standard Firehawk regulatorwith the new CBRN Firehawk MMR by any MSA authorized C.A.R.E. MaintenanceFacility.

• Firefighters benefit from the added CBRNprotection and the enhanced ergonomics of the new Firehawk MMR.

To order the Firehawk Air Mask with CBRN Protection, see the Assemble-To-Order matrix on p. 11.

Upgrade Kits are available to upgrade existing NFPA 1997 or 2002 edition SCBA to have CBRN protection. See pgs. 12–13 for ordering information.

Approved Configurations

MSA pursued and received CBRN approvals for the mostpopular SCBA components. These include the Vulcan andBlack Rhino Carrier/Harness Assemblies and the Ultra EliteFacepiece with 4-point adjustable SpeeD-ON HeadHarness. If you have a rubber or 5-point SpeeD-ON HeadHarness, your facepieces can easily be upgraded to themost current 4-point style.



FIRE SERVICE PRODUCTSSCBA Key ComponentsUltra Elite® FacepieceThe MSA Ultra Elite Facepiece offers an effective combination of comfort and performance. Ultra Elite facepiecesare available in three sizes and two materials—black Hycar rubber, and black silicone. To reduce lens fogging,users may also select from two sizes of nosecups and either a SpeeD-ON® Kevlar facepiece harness with 4 pointsof adjustment or traditional rubber harness with a fully adjustable five-point attachment system. For more informationsee Bulletin 0505-02-MC.

Facepiece Assemblies for FireHawk MMR Air MasksAll facepieces listed below are NFPA-compliant and come with a nosecup.

Size Material Firehawk Type Head Harness Neck Strap

CBRNApprovedPart No. Small Medium Large Hycar Silicone STC PTC Rubber SpeeD-On

10024421 • • • • •10024411 • • • • •10024431 • • • • •10024420 • • • • •10024410 • • • • •10024430 • • • • •10035684 • • • • •10035682 • • • • •10035686 • • • • •10040101 • • • • •10040094 • • • • •10040108 • • • • •10047547 • • • • • •10047545 • • • • • •10047549 • • • • • •10047548 • • • • • •10047546 • • • • • •10047550 • • • • • •10059918 • • • • •10059916 • • • • •10059920 • • • • •10059919 • • • • •10059917 • • • • •10059921 • • • • •



7

Rescue Belt

In a continuation of MSA’s pursuit of firefighter safety, the Rescue Beltis being introduced to the fire service. This is an NFPA-compliantemergency egress system that is unique to MSA. The belt can be integrated into the carrier and harness assembly of the MSA Vulcan or Airframe Carrier and Harness assemblies. A 50 foot or 75 foot Kevlar line with a descender and caribiner is weaved into the belt to allow a trapped fire fighter to escape to either the ground or to a floor below the fire.

The belt is available in two lengths, standard (54 inches) and long (74 inches).

Emergency Egress System

Nightfighter® Heads-Up-Display

The Nightfighter Heads-Up-Display (HUD) exceeds the latest requirements for firefighting SCBA as specified in NFPA 1981, 2002

Edition that requires all NFPA-complaint SCBA be equipped with atleast one heads-up-display.

When you open your Air Mask’s cylinder valve, the Nightfighter HUDautomatically activates, displaying the cylinder pressure reading in25% increments.

The wireless Nightfighter system consists of three components: a transmitter that mounts on the Air Mask’s gaugeline, a facepiecebracket that attaches to the Ultra Elite facepiece, and a receiver thatattaches to the facepiece bracket.

Heads-Up Display

Regulators

Firehawk® MMR Regulator Firehawk RegulatorFirehawk MMR STC Upgrade Kit(threaded type)

10025121

Firehawk MMR STC Upgrade Kit (quick-connect type)

10025120

Firehawk Ultra Elite FacepieceConversion Kit for STC MMR

10028600

Firehawk Dual Purpose Kit, threaded,Foster (with old style 1st stage regulator)

10026540

Firehawk Dual Purpose Kit, quick-connect, Foster (with old style 1st stage regulator)

10026541

Firehawk MMR PTC Upgrade Kit(threaded type)

10038665

Firehawk MMR PTC Upgrade Kit (quick-connect type)

10038666

Firehawk Ultra Elite FacepieceConversion Kit for PTC MMR

10038664

The Firehawk MMR, MSA’s mask-mounted regulator assembly, is fully compliant with NIOSH 42 CFR 84 and NFPA 1981, 2002 edition. Available with two different attachment systems, the Firehawk MMR truly redefines ease-of-use and ease-of-maintenance, combined with outstanding performance.

The Firehawk second-stage regulator features a unique Slide-To-Connect (STC) attachment system that allows firefighters to hang the regulator on the facepiece in the “ready position,” then simply push it into the facepiece when SCBA air is needed. Doffing of the regulator, while wearing gloves, is also easy with two large release buttons that automatically turn-off the flow of air as the regulator is doffed. A dual-swivel feature on the pressure hose provides maximum freedom-of-head movement and the silicone hose material ensures hose flexibility even at very cold temperatures.

In addition to the STC system, MSA also offers a second connection option for the Firehawk Regulator, the Push-to-Connect (PTC). The PTC’s Adapter self-centers the Firehawk regulator and the loud dual sound of the regulator engaging onto the facepiece provides you with confidence that the Firehawk PTC is securely attached to your facepiece—an action that takes just seconds, when seconds count!

Maintenance is also a breeze, considering the Firehawk design requires no tools, adhesives, or sealants, and has approximately 70% fewer parts as compared to other regulators on the market. Additionally, there are no internal adjustments required. Any adjustments to the regulator may be accomplished at a single adjustment point through the outlet port of the regulator.

Ease of use and maintenance, combined with outstanding performance,makes the Firehawk MMR clearly the product of choice. In keeping withthe MSA tradition of upgradeability, the Firehawk regulator can easily be added to any existing MSAMMR with Ultra Elite facepiece with a simple upgrade kit. For more information see Bulletin 0105-53-MC.

FireHawk® MMR PTC Regulator

FireHawk® MMR STC Regulator

Nightfighter® Heads-Up-Display

Bracket 10037791

Receiver 10061542

Rescue Belt50' Standard Rescue Belt 10052766

50' Long Rescue Belt 10052767

75' Standard Rescue Belt 10052768

75' Long Rescue Belt 10052769



*All weights shown are approximate figures.

Cylinders for SCBA

Cylinder Type(Cylinder & Valve)

NIOSH ServiceRating Life

Pressure Weight* (empty)

Part No.

L-30 30' 2216 psig 7 lb – 9 oz. 807586

L-30+ 30' 3000 psig 9 lb – 14 oz. 816115

Fiberglass Hoop-Wound 30' 2216 psig 13 lb. 469619

Aluminum 30' 2216 psig 18 lb. 809872

H-30 30' 4500 psig 7 lb – 3 oz. 807587

H-45 45' 4500 psig 10 lb – 9 oz. 807570

H-45 LP 45' 4500 psig 10 lb – 6 oz. 10035644

H-60 60' 4500 psig 12 lb – 11 oz. 807588

For more information see Bulletin 0108-11-MC. See Bulletin 0108-13-MC for informationon Custom-Logoed cylinders for your MSA Air Mask.

Carbon-Wrapped Cylinders

Carbon-wrapped Cylinders are the lightest SCBA aircylinders ever developed by MSA. They feature a unique outerwrap made of lightweight, high-performancecarbon fibers, which reduces cylinder weight by two tosix pounds when compared to fiberglass-wrapped cylinders and as much as ten pounds when compared toaluminum cylinders. They are available in five models toaccommodate a wide range of applications.

Carrier & Harness Assembly

Airframe™ Carrier and Harness Assembly

The one component of any SCBA that has the mostimpact on firefighter comfort is the carrier and harness assembly. MSA is introducing a new carrier and harness assembly that places anemphasis on firefighter comfort while maintainingthe robustness and reliability that is expected in thefire service. The Airframe carrier and harnesscomes standard with large side handles and a central attachment point for pulling firefighters to safety in rescue scenarios. The optionalswiveling lumbar pad provides maximum freedom of movement and comfort when crawling or climbing.

The Airframe assembly utilizes the proven pieces from previous generations of Air Masks such asthe tunneled shoulder straps for hose containment, and tri-bar slides for easy removal/installation of the waist belt and shoulder straps.

All units are equipped with double-pull waist belts and an optional cheststrap is available.

Cylinders

AirFrame Carrier and Harness Assemblies

Part Number Pressure ChestStrap

SwivelingLumbar PadLow High

10046846 X

10046847 X

10063932 X Yes Yes

10063933 X Yes Yes

10063936 X Yes

10063937 X Yes

Accessories

Standard Lumbar Pad 10011767

Swiveling Lumbar Pad 10055481

Chest Strap 10012167



9

DragonFly® PASS

The DragonFly PASS from MSA was among the first PASSdevices designed to meet the stringent NFPA-1982, 1998Edition standard.

This standard calls for automatic (hands-off) activation ofstand-alone PASS devices as well as two jumps in pre-alarmvolume. The DragonFly PASS exceeds the standard by offer-ing a range of pre-alarm volumes and tones to help usersavoid unnecessary progression to full alarm. Super-bright LED indicators provide visual indications: green indicates normal operation; red “wig-wag” indicates pre-alarm;

and continuous red indicates full alarm. In addition, an easilyaccessible activation button allows users to summon helpmanually.

The stand-alone DragonFly SA PASS features a tethered keydesigned to be attached to your jump seat, locker, or vehicleinterior. When you jump to action, the key pulls out, and yourDragonFly SA PASS activates and is on guard, monitoringyour every move. Once the job is complete, you can turn offyour stand-alone PASS by simply replacing the key andpressing reset twice. See Bulletin 0119-25-MC.

DragonFly PASS Units

DragonFly SA PASS, with heat sensor 10005071

DragonFly SA PASS, without heat sensor 10005072

Replacement Key for SA (10 pack) 10013073

Replacement REHAB Key (10 pack) 10013072

Replacement Key (less tether) 1 per 10018830

Personal Alert Safety Systems (PASS) and Redundant Alarms

ICM 2000 and ICM 2000 Plus Combination PASS & Redundant Alarm

The ICM 2000 and ICM 2000 Plus are Integrated ControlModules designed to meet NFPA-1982, 1998 EditionPASS standard and NFPA-1981, 2002 Edition SCBA

requirements for redundant End-of-Service TimeIndicators (EOST).

The ICM 2000 is an all-in-one combination PASS and redundant alarm module that can be added to any MSAMMR or BMR SCBA. Simply remove the shoulder-mount-ed pressure gauge and replace it with the ICM module.

The ICM 2000 Plus is an all-in-one combination PASS andredundant alarm with a built-in computer system that digitally displays SCBAperformance information. The ICM 2000 Plus also offers a data logging anddata downloading capability to retrieve up to 30 hours of SCBA usage information. The data provides information about the time of use, air-consumption rate, ambient temperature, andalarm activation. Through the device’s IR (infrared) port, the data can be downloaded onto a personal computer for future evaluation. For more information see Bulletin 0119-27-MC.

ICM 2000 PlusPressure with Activated

Thermistorwith InactivatedThermistor

4500 10019876 10019875

2216 10019878 10019877

3000 10047993 10047992

ICM 2000Pressure with Thermistor without Thermistor

4500 10019858 10019857

2216 10019870 10019859

3000 10047991 10047960

ICM 2000 Plus PC Kit

ICM 2000 Plus PC Kit, includes software and Jeteye reader

10020979

ICM Tx PASS/HUD Units

with Heat SensorEnabled

without HeatSensorEnabled

2216 ICM Tx 10067164 10067165

3000 ICM Tx 10067166 10067169

4500 ICM Tx 10067167 10067168

Accessories

ICM Tx Reader / ID Tag Writer 10058539

ID Tag 10058545

AA HUD Receiver 10061542

ICM® Tx Integrated PASS and HUD Transmitter

MSA’s new ICM Tx Integrated PASS combines the safety features of the ICM 2000 Plus integrated PASS with the functionality of the Heads-Up-Display (HUD) transmitter in a new integrated PASS device that’s fully compliant with the latest requirements of the NFPA 1982-1998 edition PASSstandard. Because it is now a single component on the Air Mask, firefighters benefit from a more compact andlighter weight (1/3 lb less!) design.

The ICM Tx has been designed for maximum reliabilityand durability with the use of a new solid stateaccelerometer to detect the motion of a firefighter. The use of this technology provides a durable device that is sen-sitive to motion and resistant to false alarms.

Other PASS features include:

• An integrated computer module for datalogging the most recent 25 hours of use and downloading this information onto your PC.

• A digital display of battery status, cylinder pressure, heat alarm, and service time remaining.

• A green LED “buddy light” which turns red when the PASS goes into full alarm.

• An optional heat sensor with alarm to alert you to dangerous heat levels.

The ICM Tx is a multifunctional HUD transmitter. It transmits 1/4 increment cylinder pressure status, PASS pre-alarm warnings and battery status to the HUD Receiver through aclose-range digitally encoded radio signal. Users can choose the HUD intermittent-mode or thecontinuous-mode.

The ICM Tx is modular and easy to maintain with a single-threaded connection to the SCBA. Anyexisting MSA MMR Air Mask can be easily upgraded by simply threading on the new ICM Tx.

ICM Tx Integrated PASS andHUD Transmitter



10

The Quick-Fill® System

The patented Quick-Fill System lets MSA Air Mask users refilland transfill air cylinders while the SCBA is worn, withoutremoving the air cylinder—even in IDLH atmospheres. Use thisMSA-exclusive option to:

• Fill an SCBA cylinder from a mobile compressor or cascadesystem in less than a minute.

• Transfill between two cylinders, providing an EmergencyBreathing System.

• Extend the air supply over longer durations, using a remotecompressed-air source.

Because performance is not affected, MSA Air Masks retainNIOSH certification during use of the Quick-Fill System.

The Quick-Fill System uses a special adapter assembly. On belt-mounted units, it’s located on the regulator, while MMR unitshave a junction block and fitting installed on the gauge line. AirMasks compliant to NFPA-1981, 2002 Edition have the Quick-FillURC fitting located at the Audi-Larm warning device. A Quick-Fillhose with a quick-disconnect connects the air source to theadapter for air transfer. See Bulletin 0105-92-MC for a Question& Answer overview of Quick-Fill Systems.

The Quick-Fill SystemLow-Pressure MMR Quick-Fill Kit (shoulder) for units purchased after 12/98 10020382

High-Pressure MMR Quick-Fill Kit (shoulder) for units purchased after 12/98 10020383

Quick-Fill adapter block only for shoulder-mounted units purchased after 12/98 10020515

Low-Pressure MMR Quick-Fill Kit (shoulder) for units purchased before 12/98 495172

High-Pressure MMR Quick-Fill Kit (shoulder) for units purchased before 12/98 495173

Quick-Fill Kit for ICM, Low-Pressure (excluding 3000 psig) 10020382

Quick-Fill Kit for ICM, High-Pressure 10020383

Quick-Fill adapter only for ICM (less coupling) 10020515

Replacement Parts for the Quick-Fill System

EBS hose package, includes 3-foot emergency transfill hose in Kevlar pouch 485366

Emergency transfill hose, less Kevlar pouch 485331

Kevlar pouch 485390

Male stainless steel quick-disconnect with SAE-10 thread, complete with dust cover (also for use as a fitting for customized refilling systems)

485391

Female quick-disconnect with SAE-4 thread, complete with dust cover 485392

Quick-Fill Hoses

25-ft lengths are stocked; other “custom lengths” are available on a special materialbasis. All SAE Fittings are for high-pressure service. Female quick-disconnect fittingshave dust covers.

25 ft 12 ft 10 ft 8 ft 6 ft 3 ft

FQD x FQD 485332 802690 802689 802688 802687 485331

FQD x CGA-347 Outlet 487907 802677 802675 802673 802671 492796

FQD x CGA-347 CN 487909 802685 802683 802681 802679 487427

FQD x SAE-4 487906 802704 802703 802702 802701 802705

FQD x CGA-346 Outlet 487908 802678 802676 802674 802672 492797

FQD x CGA-346 CN 487910 802686 802684 802682 802680 487428

Emergency Breathing Systems

RescueAire™ II Portable Air-Supply System

The RescueAire II Portable Air Supply System isdesigned to meet the needs of Rapid InterventionTeams (RITs). The system consists of a lightweightCarbon-Wrapped cylinder, Quick-Fill® emergencybreathing system, ExtendAire™ emergency breath-ing system, and an MMR regulator, supported by aflame- and heat-resistant harness. The RescueAireis a complete system that can provide emergencybreathing air for most any victim.

The RescueAire II System is available in both low-pressure (2216 psig) and high-pressure (4500 psig)versions. An optional-use shoulder strap is alsoprovided for hands-free carrying.

The ExtendAire™ System

The ExtendAire System can be used as both anemergency breathing system and a dual-purposedevice for MMR SCBA to allow firefighters to quickly and easily connect to an air-line.

The ExtendAire™ System

ExtendAire Air-line Hose with foster plug 812958

40" Rescue Hose 812973

ExtendAire Upgrade Kit for Threaded Firehawk MMR 10031798

ExtendAire Upgrade Kit for Quick-Connect Firehawk MMR 10031797

RescueAire™ II Portable Air-Supply System

Low-Pressure (2216 psig) with L-30cylinder

less cylinder

RescueAire II with L-30 Cylinder 10025491 10033312

RescueAire II, Firehawk STC MMR 10041196 10041198

RescueAire II, Firehawk PTC MMR 10041230 10041232

High-Pressure (4500 psig) with L-60cylinder

less cylinder

RescueAire II with H-60 Cylinder 10025462 10025492

RescueAire II, Firehawk STC MMR 10041195 10041197

RescueAire II, Firehawk PTC MMR 10041199 10041231



11

How to Order SCBA: Get the Exact Model You NeedThe Assemble-To-Order SystemMSA’s Assemble-To-Order System (ATO) will make ordering the right mask easier and faster than ever. Instead of choosing from a handful of complete Air Mask assemblies,users can order a custom-made Air Mask with every option exactly as desired. Contact MSA Customer Service Center for details.

FireHawk™ Air MaskNFPA 1981-2002 edition compliant

Part Number

UM

MM

CM

2216FireHawk Air Mask

3000FireHawkAir Mask


A

B

C

D

Airframe Single Pullwithout Chest Strap

Airframe Double Pullwithout Chest Strap

Airframe Single Pullwith Chest Strap

Airframe Double Pullwith Chest Strap

0

1

2

A

B

C

D

E

F

G

H

None

Lumbar Pad

Swiveling Lumbar Pad

Rescue Belt, Standard 50'


Rescue Belt, Long 50'


Swiveling Rescue Belt,Standard 50'


Swiveling Rescue Belt,Long 50'

Swiveling Rescue Belt,Long 75'

0

1

2

3

4

5

6

0

1

2

0

1

2

3

4

5

6

7

8

None

3AL Aluminum

Hoop-Wound

30' Carbon

3AL Aluminum less Air

Hoop-Wound less Air

30' Carbon less Air

None

30'+ Carbon

30'+ Carbon less Air

None

30' Carbon

45' Carbon

45' Carbon Low-Profile

60' Carbon

30' Carbon less Air

45' Carbon less Air

45' Carbon Low-Profile less Air

60' Carbon less Air

E

F

G

H

Firehawk STC,Threaded, Solid Cover

Firehawk STC, QC,Solid Cover

Firehawk PTC,Threaded, Solid Cover

Firehawk PTC, QC,Solid Cover

0

1

2

None

Foster

Hansen

0

1

3

4

None

Quick-FillShoulderMounted*

ExtendAire(EBS) withDual Quick-Connect**

ShoulderMountedQuick-Fill &ExtendAire(EBS) withDual Quick-Connect*

A

B

C

D

E

F

G

None

Ultra Elite Hycar,Small

Ultra Elite Hycar,Medium

Ultra Elite Hycar,Large

Ultra EliteSilicone, Small

Ultra EliteSilicone, Medium

Ultra EliteSilicone, Large

0

1

2

None

Medium

Large

0

1

2

3

4

None

Rubber lessNeckstrap

SpeeD-ONlessNeckstrap

Rubber withNeckstrap

SpeeD-ONwithNeckstrap

A

B

C

D

StandardSpeakingDiaphragm

Clear-Command Ready

Clear-Command AMP

Clear-CommandAMP/RI(Less PTT)

A

B

C

D

None

PressureGauge

ICM Tx withHeat Sensor

ICM Tx with-out HeatSensor

0

1

2

None

HardCase

SoftCase

SCBA TypeCarrier/Harness

Assembly

Lumbar Pad/

Rescue Belt�Cylinder MMR Regulator Type

Air-Line

Options

Emergency

Breathing

System

Facepiece Nosecup Head Harness CommunicationsGauge/

Integrated PASSCase

*MM is notcompatiblewith Quick-Fill Option

**ExtendAireis notcompatiblewith air-lineoptions.

K-

�Note: Standard Rescue Belt fits waist sizes up to 54 inches.Long Rescue Belt fits waist sizes up to 74 inches.

Options A & C canonly be chosen ifeither a rescue beltor an air-line optionis selected.

If choosing a rescue belt,the carrier/harnessassembly must be a singlepull (options A or C).

If options 1or 2 arechosen, thecarrier/harnessassemblymust be asingle pull(options Aor C).

CBRN Compliant FireHawk™ Air Mask(NFPA 1981-2002 edition compliant, NIOSH 42 CFR Part 84 CBRN certified)

Part Number

UM

MM

CM




A

B

C

D

Airframe Single Pullwithout Chest Strap

Airframe Double Pullwithout Chest Strap

Airframe Single Pullwith Chest Strap

Airframe Double Pullwith Chest Strap

0

1

2

A

B

C

D

E

F

G

H

None

Lumbar Pad

Swiveling Lumbar Pad







Swiveling Rescue Belt, Long 50'

Swiveling Rescue Belt, Long 75'

0

1

2

3

4

5

6

0

1

2

0

1

2

3

4

5

6

7

8

None

3AL Aluminum

Hoop-Wound

30' Carbon

3AL Aluminum less Air

Hoop-Wound less Air

30' Carbon less Air

None

30'+ Carbon

30'+ Carbon less Air

None

30' Carbon

45' Carbon

45' Carbon Low-Profile

60' Carbon

30' Carbon less Air

45' Carbon less Air

45' Carbon Low-Profileless Air

60' Carbon less Air

N

Q

R

S

CBRN Firehawk STC,Threaded, Solid Cover

CBRN Firehawk STC,QC, Solid Cover

CBRN Firehawk PTC,Threaded, Solid Cover

CBRN Firehawk PTC,QC, Solid Cover

0 None 0

1

3

4

None

Quick-FillShoulderMounted*

ExtendAire (EBS)with Dual Quick-Connect

ShoulderMounted Quick-Fill & ExtendAire(EBS) withDual Quick-Connect*

A

B

C

D

None

Ultra Elite Hycar,Small

Ultra Elite Hycar,Medium

Ultra Elite Hycar,Large

0

1

2

None

Medium

Large

0

2

4

None

SpeeD-ONlessNeckstrap

SpeeD-ONwithNeckstrap

A

B

C

D

StandardSpeakingDiaphragm

Clear-Command Ready

Clear-Command AMP

Clear-CommandAMP/RI(Less PTT)

A

B

C

D

None

PressureGauge

ICM Tx withHeat Sensor

ICM TxwithoutHeat Sensor

0

1

2

None

HardCase

SoftCase

SCBA TypeCarrier/Harness

Assembly

Lumbar Pad/

Rescue Belt�Cylinder MMR Regulator Type

Air-Line

Options

Emergency

Breathing SystemFacepiece Nosecup Head Harness Communications

Gauge/

Integrated

PASS

Case

K-

�Note: Standard Rescue Belt fits waist sizes up to 54 inches.Long Rescue Belt fits waist sizes up to 74 inches.

Options A & C canonly be chosen ifeither a rescue beltor an air-line optionis selected.

If choosing a rescue belt,the carrier/harnessassembly must be a singlepull (options A or C).

*MM is notcompatible withQuick-Fill Option



12

MSA Air Mask Upgrade Kit to NFPA 1981, 2002 Edition

3000 psi FireHawk Upgrade Kits

MSA also offers upgrades for NFPA 1981-1997 compliant 3000 psi operating system SCBA to meet the requirements for 2002 compliance. The upgrade kitslisted below provide the necessary components such as the Heads-Up Display and Audi-Larm with Universal Rescue Connection (URC).

Upgrade to 2002 edition for Air Mask with Vulcan™ carrier and harness, no ICM 10053647

Upgrade to 2002 edition for Air Mask with Vulcan carrier and harness and ICM 2000 with Thermistor 10053617

Upgrade to 2002 edition for Air Mask with Vulcan carrier and harness and ICM 2000 less Thermistor 10053618

Upgrade to 2002 edition for Air Mask with Vulcan carrier and harness and ICM 2000 Plus with Thermistor 10053619

Upgrade to 2002 edition for Air Mask with Vulcan carrier and harness and ICM 2000 Plus less Thermistor 10053620

Upgrade to 2002 edition for Air Mask with Vulcan carrier and harness and Dragonfly® PASS (includes split-gauge hose kit) 10053641

Upgrade to 2002 edition for Air Mask with Black Rhino™ carrier and harness, no ICM 10053642

Upgrade to 2002 edition for Air Mask with Black Rhino carrier and harness and ICM 2000 with Thermistor 10053643

Upgrade to 2002 edition for Air Mask with Black Rhino carrier and harness, and ICM 2000 less Thermistor 10053644

Upgrade to 2002 edition for Air Mask with Black Rhino carrier and harness, and ICM 2000 Plus with Thermistor 10053645

Upgrade to 2002 edition for Air Mask with Black Rhino carrier and harness, and ICM 2000 Plus less Thermistor 10053646

Upgrade to 2002 edition for Air Mask with Black Rhino carrier and harness, and Dragonfly PASS (includes split-gauge hose kit) 10053616

Type of Regulator(In Use)

OperatingPressure (In Use)

Carrier & Harness(In Use)

Gauge/IntegratedPass In Use

Nightfighter Transmitter to be (Ordered)

Audi-larm to be(Ordered)

Part Number QuantityA-KIT-

M

B

Mask-Mounted

Belt-Mounted

1

2

Low 2216

High 4500

1

2

3

Black RhinoMMR

Black RhinoBMR

Vulcan

1

2

3

4

Redundant Alarm

Dragonfly/Redundant AlarmMMR

Dragonfly/Redundant AlarmBMR

ICM 2000/ICM 2000 Plus

1

2

3

A

B

E

F

Standard Transmitter

Standard Transmitter equippedfor Quick-Fill Less Fitting

Standard Transmitter withQuick-Fill Fitting

ICM Tx with Heat Sensor

ICM Tx without Heat Sensor

ICM Tx with Heat Sensor with Quick-Fill Fitting

ICM Tx without Heat Sensor with Quick-Fill Fitting

1

2

Audi-Larm withQuick-Fill Fitting

Audi-Larm lessQuick-Fill Fitting



13

Spare Facepiece Upgrade Kits for CBRN Approval of FireHawk Air Masks

Ultra Elite® MMR Facepiece with Slide-to-Connect Adapter, SpeeD-ON Head Harness and Nosecup

Ultra Elite® MMR Facepiece with Push-to-Connect Adapter, SpeeD-ON Head Harness and Nosecup

Small 10024421 Small 10035684

Medium 10024411 Medium 10035682

Large 10024431 Large 10035686

Note: To ensure the proper function of your SCBA, only MSA authorized C.A.R.E. facilities should be installing upgrade kits. To find the nearest C.A.R.E. facility, contact your local MSA distributor or MSA Customer Service Center at 1.877.MSA.FIRE.

Ultra Elite®, Hycar with Type of Head Harness in Use

5-Point SpeeD-ON or Rubber


4-Point SpeeD-ON

4-Point SpeeD-ON



Kits to be Ordered

If the facepiece you are currently using does not meet the criteria above, you must order from the chart below for spare facepieces.

Head Harness/ CBRN Label Kit Facepiece Kit

� 10053064 � 10028600

� 10053064 � 10038664

� 10053063 � 10028600

� 10053063 � 10038664

� 10053064

� 10053063

Type of Firehawk MMR Being Ordered

Slide-to-Connect

Push-to-Connect

Slide-to-Connect

Push-to-Connect

Already Using Firehawk MMR

Already Using Firehawk MMR

� Kit includes the 4-point SpeeD-ON Head Harness and the CBRN Approval label

� Kit includes the CBRN Approval Label

� Kit includes the necessary parts to convert an existing 1/4-TurnUltra Elite Facepiece to a Slide-to-Connect Firehawk Facepiece

� Kit includes the necessary parts to convert an existing 1/4-TurnUltra Elite Facepiece to a Push-to-Connect Firehawk Facepiece

CBRN Upgrade Kits for MSA NFPA-1981, 1997 & 2002 Editions MMR Air Masks

Current MMRRegulator

in Use

Current Type of EmergencyBreathing System in Use

Firehawk MMR Currently in Use orFirehawk MMR Desired for 1/4 Turn Conversion

Ultra Elite Hycar FacepieceCurrently in Use

Size of Ultra Elite

to be Ordered

Part Number QuantityA-C-

Q

F

Quarter-Turn

Firehawk

0

1

2

0

1

2

None

ExtendAire*

Dual-Purpose

None

ExtendAire*

Dual-Purpose

A

B

C

D

E

F

G

H

Firehawk (Purge Cover) with STC & THD Hose

Firehawk (Purge Cover) with STC & QC Hose

Firehawk (Purge Cover) with PTC & THD Hose

Firehawk (Purge Cover) with PTC & QC Hose

Firehawk (Solid Cover) with PTC & QC Hose

Firehawk (Solid Cover) with STC & QC Hose

Firehawk (Solid Cover) with PTC & THD Hose

Firehawk (Solid Cover) with STC & THD Hose

1

2

3

Ultra Elite, Hycar,5-Point AdjustableRubber Head Harness**

Ultra Elite, Hycar, 4-Point AdjustableSpeeD-ON HeadHarness**

Ultra Elite, Siliconeor other Style MSA Facepiece

0

1

2

3

None

Small

Medium

Large

Air Mask with 1/4 Turn MMR

Air Mask with Firehawk MMR

** If you choose options 1 or 2, place a 0 in the next column

* If you choose option 1,you must chooseOptions B, D, E or F inthe next column



The Helmet Communication Systemfrom MSA is a state-of-the-art radiointerface device which significantlyimproves the user’s ability to receiveand send messages even in loudambient-noise environments. It goes wherever you go. The systemconsists of a helmet-mounted microphone and ear speaker assembly that weighs 5.3 ouncesand easily snaps onto the user’s firehelmet or industrial-style helmet’sratchet suspension. The helmetmic/ear speaker assembly connectsto a lapel microphone or optionalstand-alone PTT (push-to-talk) unit.The lapel microphone and PTT arepermanently fitted with a connectorfor attachment to the specific radioof choice. The Helmet Communication System also offers a plug-in truck communicationadapter that can be used by firefighters, along with their helmet microphone assembly, on the way to a fire scene or other incident. Once the firefighter arrives at the scene, the trucksystem cable is unplugged from the helmet microphone, and the helmet microphone cableend is connected to the user’s lapel mic or PTT.

The user of the Helmet Communication System has uninterrupted communication from thetime the alarm sounds until the incident is over.

For more complete information, see Bulletin 3639-01-MC.

ClearCommand® HCS Helmet Communication System

Features & Benefits• Incorporates a “noise-eliminating” bone-

conduction voice transmitter that virtuallyeliminates high ambient noise levels.

• Custom user-fitted ear speaker brings allincoming communication directly to theuser’s ear. No need to lift your lapel mic upto your ear to hear transmission.

• Easily snaps onto the ratchet suspension of fire helmets or industrial-style helmets.The unit can be easily transferred to otherusers, and no tools are required forremoval.

• Can be used over the top of facepiece headharnesses, hoods and liners without losingthe quality of the transmission.

• The bone-conduction microphone is made of soft silicone material, which makesit comfortable to wear, with no pressurepoints.

• The helmet microphone assembly can bereversed on the helmet suspension to position the ear speaker on either ear.

• The helmet mic system, when used with thelapel mic or PTT, is powered by the batteryfrom the radio. No need to replace or re-charge dry cells.

• Special connectors suitable for most common radios are available for the lapelmicrophone and PTT, which allows users to adapt the system to their existing radios.

• The helmet mic is NFPA-certified whichallows its use while fighting fires.

• Intrinsic safety approvals allow the use of the Helmet Communication System inhazardous environments.

• The stand-alone PTT unit is designed foruse under hazardous material suits. Thelarge button makes it easy for the user todepress and communicate.

• The helmet mic incorporates a cable keeper which allows for storage of thecable when it’s not connected to the lapelmic or PTT.

Helmet Micwith Lapel Mic

Helmet Mic withStand-Alone PTT

Helmet Microphone Assembly

Helmet Microphone Assembly (includesCustom Fitted Flannel Headband Liner)

10042902

Lapel Mic Kits for Radio Interface*

Maxon SP120, SP130, SP140 10042908

Motorola HT600, MT1000, MTX820, MTX900, Radius P200 & P500

10042909

Motorola HT1000, JEDI, MT2000, MTS2000,MTX838, MT839, MTX8000, MTX9000

10042903

Motorola Astro and Saber 10042904

Motorola Radius GP300, P110, SP50, LTS2000, Spirit-III, GTX, SP21

10042905

Motorola STX, MX800, MX840 10042912

GE Ericsson PCS, PC2005 10042906

GE Ericsson MRK, LPE-200, Prism, PX 126T 10042907

Stand-Alone PTT Kits for Radio Interface*

Maxon SP120, SP130, SP140 10045667


10045668


10045662


Motorola Radius GP300, P110, SP50, LTS2000,Spirit-III, GTX, SP21

10045664




Truck System

Nexus Adapter, D. Clarke 10045732

Phonejack Adapter, D. Clarke 10045731

Parts and Accessories

Dust Cover 10046087

Guard Ring, Tall 10046123

Guard Ring, Short 10046122

Belt Clip Assy, Standard 10046089

Belt Clip Assy, Clothes Pin Type 10046120

O-Ring, Single Pin Connector 10046121

Flannel Head Band Liner 10045778

*If your specific radio is not listed, please contact MSA Customer Service.



15

MSA’s ClearCommand CommunicationsSystem is designed specifically to meet themodern communications needs of firefighters.Because it’s available in two versions, amplifi-er and amplifier with radio interface, firefight-ing teams can be properly fitted for the job athand. Also, the systems are designed for“shared-use” of the amplifier with a unique“bus-bar” arrangement, so individual issue isnot required.

The ClearCommand systems feature an inter-nally mounted microphone coupled with alarge-diameter (50mm) amplifier speaker foroptimal clarity and volume. Using a propri-etary circuit design, the system delivers morethan twice the volume of a facepiece alone.Mounted in an “out-of-the-way” position, theClearCommand System doesn’t block vision ormechanical communication. The Ultra Elite’smechanical voicemitter is still fully functional, even with the system installed.

The radio interface version features the same amplifier as the amp-only version, combined withan ear-speaker for incoming radio messages and a lapel mic assembly for interface with over 100radios. The lapel mic can be used as a component of the ClearCommand system or as a stand-alone hand mic.

Both the amplifier and radio interface models are intrinsically safe, and meet the applicablerequirements of NIOSH and NFPA 1981, 2002 edition.

ClearCommand® Communications System for Ultra Elite® Facepieces

ClearCommand System Kits

Amplifier Kit, complete with microphone 10024074

Amplifier Radio Interface Kit, w/ microphone, less PTT

10051290

Microphone Kit, with mounting bracket 10023055

Lapel Mic Kits for Radio Interface*

Maxon SP120, SP130, SP140 10042908


10042909


10042903


Motorola Radius GP300, P110, SP50, LTS2000, Spirit-III, GTX, SP21

10042905




Stand-Alone PTT Kits for Radio Interface*

Maxon SP120, SP130, SP140 10045667


10045668


10045662


Motorola Radius GP300, P110, SP50, LTS2000,Spirit-III, GTX, SP21

10045664




Truck System

Nexus Adapter, D. Clarke 10045732

Phonejack Adapter, D. Clarke 10045731

Parts and Accessories

Dust Cover 10046087

Guard Ring, Tall 10046123

Guard Ring, Short 10046122

Belt Clip Assy, Standard 10046089

Belt Clip Assy, Clothes Pin Type 10046120

O-Ring, Single Pin Connector 10046121

Flannel Head Band Liner 10045778

*If your specific radio is not listed, please contact MSA CustomerService.

MSA offers a complete program for maintenance and repair ofMSA Air Masks.

The program is supportedwith personalized training

tailored to customers’ needs and taught in the field by

MSA-authorized personnel.

User maintenance covers procedures necessary toconduct general cleaning, inspection, and limitedmaintenance in accordance with the OccupationalSafety and Health Administration (OSHA), National Fire Protection Association (NFPA),and the American National Standards Institute (ANSI) standards.

C.A.R.E. Certified Air Mask Repair Education covers all maintenance for both low- andhigh-pressure SCBA. Air Mask inspection and maintenance can be performed by MSAor a factory-authorized service center. Or, individuals can obtain training for C.A.R.E certification from MSA. By having a C.A.R.E-certified technician on staff, fire depart-ments and other facilities with a large number of Air Masks can perform all inspectionand maintenance in-house.

• All repairs and maintenance can be done in the field.

• A selection of overhaul kits, spare parts, and tool kits is available.

• Users may conduct periodic performance testing using an authorized MSAregulator tester.

Field Maintenance and Repair



MSA’s APR adapter provides firefighters with the versatility they need to perform all tasks at the fireground with one common facepiece. From fire-fighting to overhaul to homeland security, firefighters can switch from a positive-pressurefacepiece to a negative-pressure air-purifying respirator simply by engaging the APR Adapter.The APR Adapter uses MSA’s comprehensive family line of air-purifying cartridges; select from the Advantage cartridges or our CBA/RCAcanisters to protect against a multitude of airborne contaminants.

The APR Adapter is designed for use in non-IDLH environments and is NIOSH-approved. ContactMSA for more information.

APR Adatpers1/4-turn MMR Version

APR Adapter 10029823

APR Adapter Individual Kit 10032926

APR Adapter Truck Kit 10032924

Firehawk MMR STC Version




Firehawk MMR PTC Version




Accessories

Ultra Elite, Anti-Fog Applique (10/pkg) 10037809

Ultravue, Anti-Fog Applique (10/pkg) 10037810

CBA/RCA Canisters (box of 6) 817590

Replacement Baffle 809858

Replacement Bayonet Cover 813341

Spectacle KitsUltra Elite Spectacle Kit (side wire support) 804638

Ultra Elite Spectacle Kit (center support) 493581

NosecupsMedium Black Nosecup 495188

Large Black Nosecup 495189

High-Pressure Filling HoseHigh-Pressure Filling Hose Assembly 476105

Accessories for Filling Low-Pressure(2216 psig) CylindersAir Outlet Connection, complete w/ Gauge 68846

Air Coupler Tee 68850

Air Pigtail 68851

Low-Pressure Air-Filling Hose, 5 feet long 476156

APR Adapter

High-Pressure Filling Hose

Provides a conven-ient means to con-nect and chargehigh-pressure airinto a high-pressure4500 psig cylinder.

SCBA Accessories

Spectacle Kit for Full-Facepiece Respirators

For use by workers who must wear corrective lenses, the Spectacle Kit canbe easily inserted into the facepiece.The kit includes a wire support, rubberguide, and pair of metal-frame specta-cles. There are two kits for the Ultra Elitefacepiece; one uses a side wire supportto hold the lenses in the facepiece, whilethe other uses a center support to position the unit. Desired adjustment isobtained by moving the spectacles inand out of the rubber guide and up and down the wire support. One size of spectacle frame is used (S-7 shape, 48-mm lens size) with Universal Bridge Corrective Lenses that can beobtained from local sources. The Spectacle Kit can be used with a nosecup.

Side-Support Spectacle Kitfor Ultra Elite® Facepiece

Center-Support Spectacle Kit for Ultra Elite® Facepiece

Nosecups

Molded from a softrubber compoundthat is resistant tofacial oils, the optionalnosecup helps reduce the possibili-ty of lens fogging. The nosecup is particularlyeffective under conditions of high humidityand/or low temperatures by inhibiting contactof moist exhaled air with the facepiece lens. Anosecup can be easily affixed to the facepiecewithout tools. Any size nosecup may beinstalled in any size Ultra Elite Facepiece for acustomized, more comfortable fit.

MSA FireSlayer and Be Ready promotional items are available to anyone via MSA's Internet site. Sporting appropriate logosare shirts, duffels, caps, golf items, mugs, money clips, lighters and more. The Fireslayer logo helps promote our products tothe firefighting market, while the Be Ready logo is aimed at Homeland Security. Look for the"MSA Gear" link in the Resources & Info area after selecting MSA North America; MSA UnitedStates from the MSA homepage at MSAnet.com.

After making your selections, complete the shipping information and furnish a credit card number. Your order will be processed, and you should receive it within a week. Express serviceis also available.

®

Shop Online for MSA Gear

Accessories for Filling Low-Pressure (2216 psig)Cylinders



17

CBRN Ultra Elite® Gas Mask

Firefighters do not always need SCBA protection, especially outside the immediate firescene. Once the hazard has been assessed, air-purifying respirators (APR) may makethe most sense for low concentrations of certain contaminants. With the new Ultra EliteCBRN Gas Mask, your department benefits from using a common platform facepiece for both APR and SCBA applications, allowing standardized training and eliminatingredundant fit-testing.

APR and SCBA facepieces should not be used interchangeably. For that reason, MSA is introducing the Ultra Elite CBRN Gas Mask for use in the fire service and to firstresponders. The facepiece has been trusted in the fire service for more than 10 years. In that time, the Ultra Elite has been field-proven to provide firefighters with exceptionalfit, comfort, and value.

The MSA CBRN Canister meets or exceeds all performance requirements of the newNIOSH CBRN Standard by effectively removing harmful gases, vapors, and particulatesso that the user can confidently breathe safely. The canister contains chemical sorbentsand a P100 filter to attract, retain, and neutralize contaminants.

Safety• Super-soft black Hycar rubber exceeds the CBRN permeation requirements

• Large lens with 83% unimpeded vision

• Centrally located inlet port for secure, comfortable fit and feel

• Centrally located mechanical speaking diaphragm for clear communications

• Optional ClearCommand® Amplifier for increased communication capabilities

Simplicity• Available with a 5-point rubber or SpeeD-ON® head harness

• Identical sealing surfaces for both SCBA and Gas Mask facepieces—eliminating the need for redundant fit testing

• Simplifies respiratory protection training program

Reliability• The Ultra Elite facepiece is fire-service proven, with over a decade of trusted use

• MSA has been making gas masks since World War I

• Largest supplier of gas masks to the law enforcement market

CBRN Ultra Elite Gas Mask (Facepiece with Head Harness)Size w/Rubber

Head Harnessw/SpeeD-ON Head Harness

Small 10052776 10052780

Medium 10052781 10052779

Large 10052778 10052777

Canisters & Cartridges

MSA CBRN Canister 10046570



Advantage® 1000 Riot Control Gas Mask

A clean, simplified respirator with Hycarfacepiece (based on a proven facepiecedesign developed for the U.S. ArmedForces) that’s up to 40% lighter thanconventional full-face respirators andgives high performance, customizedfit, comfort, economy, and useracceptance.

• Flexible, 1-piece polyurethanelens with wide field of vision isbonded to durable Hycar rubberfacepiece

• Dual-canister mount (bayonetmount) allows weapon sighting fromeither shoulder

• Fully elastic, 6-point head harnesspromotes easy on/off, easy adjustment, no hair pulling

• Standard nosecup helpseliminate lens fogging

• Standard mechanicalspeakingdiaphragm included, or add MSA’s optional ESP II Communications System

• NIOSH-approved (No. TC-14G-0235) for protection against chloroacetophenone (CN), chlorobenzylidene (CS), P100 particulate efficiency level, and particulates

Advantage 1000 Riot Control Gas Mask

Complete with canister, nosecup, and identification tag.

Small 813860

Medium 813859

Large 813861

Advantage 1000 Riot Control Canisters

Advantage 1000 RC Canisters, box of 6 817590

For more specific information on chemical warfare agents, see Bulletin 5555-160.

Millennium® CBRN Gas Mask

The new NIOSH government CBRN stan-dard for full-facepiece gas masks was issued on March 7, 2003. Afterextensive testing to that standard, MSA’s Millennium CBRN Gas Maskwas first to receive NIOSH certifica-tion as “compliant against CBRN”.

A Hycar version of the reliable military-style gas mask (MCU-2/PMask, used by U.S. Air Force in DesertStorm) that combines high performance, customized fit, comfort and cost efficiency.

• Flexible, 1-piece polyurethane lens withwide field of vision is bonded to durableHycar rubber facepiece.

• Dual-canister mount allows weaponsighting from either shoulder

• Drinking tube provides connection for fluid ingestion in contaminated atmospheres

• Fully elastic, 6-point head harness promotes easy on/off and adjustment, with no hair pulling

• Internal nose cup with 2 check valves, deflects air from the lens, reducesfogging

• CBRN canister containing chemical sorbents and a P100 filter to attract,retain and neutralize contaminants

• Standard mechanical speaking diaphragm included, or add MSA’s optionalESP® II Communications System

• Optional butyl-coated nylon hood for total head protection

• NIOSH-approved (No. TC-14G-0270) for protection at a CBRN Cap 1 rating

Millennium CBRN Gas MaskWith nosecup, drinking tube, and clear polycarbonate outsert. Order canister separately.

Small 10051286

Medium 10051287

Large 10051288

Millennium CBRN Canister

MSA CBRN Canister 10046570

Respirators for Homeland Security

AccessoriesESP® II Communications System

The ESP II Communications System, a 1-piece, self-contained, electronic speech projection device, allows wearers to speak normally,yet be heard loud and clear.

ESP Communications System for Millennium andAdvantage 1000 Facepieces (less battery)

10026265

Lens Outsert

Polycarbonate lens outsert snaps into place over Millennium orAdvantage 1000 facepiece lens, providing additional impact protection.Tinted outsert helps conceal identity (suitable only when sufficient lightexists).

For Millennium Facepiece Small Medium/Large

Clear lens outsert 10008907 10008906

Tinted lens outsert 10008909 10008908

For Advantage 1000 Facepiece Small Medium/Large

Clear 806463 806462

Tinted 806465 806464

Other Accessories

Gas Mask Pouch, Military Style 10034184

Black Nylon Bag 817040

Advantage 1000/Millennium Spectacle Kit 816137

Butyl-Coated Nylon Hood 305022



19

The OptimAir 6HC PAPR (Health CarePowered Air-Purifying Respirator) from MSAis specifically designed to protect health careprofessionals from residual Chemical/Biological/ Radiological Agents, when theyare performing First Responder duties duringHomeland Security or terrorist situations.

The system features a lightweight, chemical-resistant Tychem SL Hood and belt-mountedblower with two HC Cartridges. The canisterscontain a pleated high-efficiency (P100) filterto remove aerosols, radionuclides, and solidparticulates; and an impregnated activatedcarbon bed to adsorb (filter out) gases andvapors. The carbon bed is the same as used in military canisters and is effective against mustard (HD), Sarin (GB), DMMP (a Sarin simulant), HCN, and CK.

For more information, see Bulletin 1010-13-MC.

OptimAir® 6HC PAPR

• Designed specifically for use by ER and other health care providers during HomelandSecurity situations.

• Continuous air flow meets or exceeds NIOSH standard

• Entire lightweight PAPR weighs under 6 pounds

• Available with Tychem SL Hood or Advantage 3100 Facepiece.

• Tychem SL hood weighs only 8 ounces.

• Hood is compatibly worn with facial hair and glasses

• No fit testing necessary when using hood

• Design allows freedom of movement plus optimum protection

• Tychem SL hood and Advantage 3100 facepiece are comfortable, easy to don and use

• Lithium battery provides 10-year shelf life, 4 hours of wear time

• Approved for High Efficiency, Chlorine, Sulfur Dioxide, Hydrogen Chloride, HydrogenFluoride, Hydrogen Sulfide (escape only)

• NIOSH approval TC-23C-2201 with Tychem Hood

• NIOSH approval TC-23C-2209 with Advantage 3100 Facepiece

A powered air-purifying respirator that filters contaminants from ambient air via CBA/RCA OptiFiler® Cartridges. Belt-mountedmotor/blower provides constant air flow via breathing tube to facepiece.

• Features Millennium Facepiece

• Used with combination cartridges for protection againstparticulates, toxic gases and vapors, or a combination ofthese hazards

• Maintenance-free lithium battery with 10-year shelf life

• Optional rechargeable NiCd battery

OptimAir® 6A PAPR with OptiFilter® Cartridges for Homeland Security Applications

OptimAir 6HC and 6A PAPRs

OptimAir 6HC PAPR with Tychem Hood Includes motor/blower module, lithium battery,breathing tube, belt and 2 HC Cartridges

10041550

OptimAir 6HC PAPR with Advantage 3100 FacepieceIncludes motor/blower module, lithium battery,breathing tube, belt and 2 HC Cartridges

10045100

HC Cartridges, Pkg. of 6 10042448

Tychem SL Hood 10048179

Breathing Tube for Hood 481980

Single-use lithium battery 10048180

NiCd Battery for training use 491120

Single-Unit Single-Rate Battery Charger for NiCdBattery

463471

Motor/Blower module 10048178

Polyurethane-coated nylon belt 492827

OptimAir 6A PAPR Kitcomplete with medium Millennium Facepiece, lithium battery, belt, motor/blower module. (Order OptiFilter cartridges separately.)

10046394

CBA/RCA OptiFilter Cartridges, Box of 6 10011890

Lithium Battery Pack for OptimAir 6A PAPR 816912

Motor/Blower Module 491102

Protective Covers, Package of 5 808494

Optional Battery and Charger

Rechargeable NiCad Battery 491120

Standard Single-Unit Battery Charger 463471

Single-Unit, Dual-Rate Battery Charger 486614

OptimAir 6HC PAPR with Tychem Hood

For more information on Homeland Security Specialty Equipment and chemical warfare agents, see Bulletin 5555-160-MC.

Other OptimAir 6A and/or 6HC Replacement Parts and Accessories

Breathing Tube Assemblies

For Tight-Fitting Facepieces, 30" 486364

For Tight-Fitting Facepieces, 36'' 492197

For Tyvek Hood 481980

Protective Cover

Protects from water (such as in asbestos decontamination showers) or particulate contamination.

Pkg of 5 for OptimAir 6A 808494

Flow-Check Devices

MSA flow-check devices allow users of PAPRs to quickly and conveniently verify that their unit is providing the required air flow.

Flow-Check Meter 487995

Adapter for Flow-Check Meter for use with Tyvek Hood

489999

Adapter for Flow-Check Meter for use with OptimAir MM PAPR

491046



QuikChek™ Adapters

QuikChek™ III Adapter

The QuikChek III Adapter is specially designedfor respirators equipped with Ultra Elite®

Full Facepieces. The QuikChek III model threads directly into the facepiece inlet. For completion of a quantitative fit test, an OptiFilter® XL Cartridge must then be threaded into the QuikChek III Adapter.

QuikChek™ IV Adapter

Adapter allows qualitative fit-testing and is specially designed for Ultra Elite and UltravueFull-Facepieces with quarter-turnquick discon-nect. Fit-test kit includes a Type H Cartridge.

QuikChek™ Adapter for Advantage 1000 Facepiece

QuikChek Adapter converts a standard Advantage 1000 Facepiece to a probed respirator by replacing the speaking diaphragm.

QuikChek™ AdaptersQuikChek III Fit Test Adapter 805078

Replacement Kit with 25 ft of sampling tubing, 25 connectors, clip and suction cups

803196

OptiFilter XL Cartridge (box of 6) 496081

QuikChek IV Fit-Test Kit 817446

Type H OptiFilter Cartridge (box of 6) 491010

QuikChek Adapter for Adv 1000 10006227

Air-Purifying Respirator Fit-Test AccessoriesFacepiece Fit-Test Kits

The Occupational Safety and Health Administration (OSHA) requires fit tests toensure proper fit for workers who use respirators. Quantitative testing methodsrely on objective data to determine a proper fit. Qualitative fit-test methods aresubjective in nature and rely on the judgment of the test subject.

Qualitative Test Kit Replacement Hood & TestSolutions

Banana Oil Test Kit

Facepiece Fit-Test KitsBitrex Qualitative Fit-Test Kit

Bitrex QLFT Kit 697444

Replacement Fit-Test Solution 697446

Sensitivity Solution 697445

Replacement Hood 697448

“Using the Qualitative Fit-Test Kit” videotape 697449

Saccharin Qualitative Fit-Test Kit

The Saccharin Qualitative Fit-Test Kit eliminates the need for specialfilters and is especially useful for dust/mist respirators.

Saccharin QLFT Kit 697287

Replacement Sensitivity Test Solution, 55 ml bottle 697285

Replacement Fit-Test Solution, 55 ml bottle 697286

Replacement Hood 697448

“Using the Qualitative Fit Test Kit” videotape 697325

Banana Oil Qualitative Fit-Test Kit

MSA’s Banana Oil Fit-Test Kit relies on a test subject’s ability to detect a 95% pure solution of Isoamyl Acetate (banana oil).

Qualitative Fit Test Kit 801628

Qualitative Fit Test Kit, in rugged Pelican case 801629

Probed Respirator FacepiecesAll Models Available

To make it easy for you to perform quantitative fit tests, MSA offers a full line ofspecially modified facepiece assemblies. Each probed facepiece is equipped witha built-in probe assembly, sampling line, and clothing clip to hold the samplingline. The probes are made of solid brass. In all MSA half-facepiece models, theprobe is attached to the body of the respirator. Full-facepiece respirators areprobed through the lens and sealed with a neoprene washer and brass fittings.

MSA also offers probed lenses for use with existing Ultravue facepieces. Theselenses come completely assembled with the same brass probe, sealing hardware,and sampling line as the probed full-facepieces. All respirators use standard MSAhigh-efficiency filters for tests.



21

PremAire® Cadet RespiratorThe Assemble-To-Order System

MSA offers more PremAire System Respirator choices than ever before.Thousands of possible combinations let firefighters select just the rightPremAire Respirator for the job.

MSA’s Assemble-To-Order (ATO) System makes ordering the right unit easierand faster than ever. Instead of choosing from a handful of completePremAire assemblies, users can order a custom-made unit with every optionexactly as desired. The ATO System works by allowing users to create theirown part numbers. Each digit of an ATO part number represents a specificcomponent, so that the entire part number represents a finished respiratorbuilt exactly to the desired specifications.

Using the ATO System below is easy. Just select the number or letter that corresponds to the choice of components and fill in the appropriate box. Anumber or letter from each category must be selected. For example, to order a PremAire System respirator with nylon belt assembly, right-hip 10-minutecarbon fiber escape cylinder, dual-supply option with 8-inch hose, FirehawkSlide-To-Connect 30'' solid cover regulator, a non-NFPA black Hycar UltraElite Facepiece, size medium, with large nosecup and large EZ-Don HeadHarness, Foster steel quick-disconnect and a hard side carrying case, theATO part number would be: C-PS151E-11M24-G-1.

Type BeltAssembly Escape Dual-

SupplyMMR

RegulatorFacepiece

Type Facepiece Face-pieceSize

Nosecup HeadHarness

Quick-Disconnect Case

PS Prem-AireSystem

1

2

3

Nylon

Urethane

Nomex

0

1

2

3

4

5

6

7

8

None

5-MinRight HipCarbonFiber

5-MinLeft HipCarbonFiber

5-MinRight HipAluminum

5-MinLeft HipAluminum

10-MinRight HipCarbonFiber

10-MinLeft HipCarbonFiber

10-MinRight HipAluminum

10-MinLeft HipAluminum

0

1

2

None

8''HoselessQD

15''HoselessQD

E

F

G

H

Z

FirehawkSTC 30"Solid Cover

FirehawkSTC 42"Solid Cover

FirehawkPTC 30"Solid Cover

FirehawkPTC 42"Solid Cover

1/4-Turn, 24''for Duo-TwinFacepiece

0

1

2

None

Non-NFPA

NFPA

0

1

2

A

B

None

UE Hycar

UESilicone

Duo-Twin,Hycar

Duo-Twin,Silicone

0

S

M

L

None

Small

Med

Large

0

1

2

A

B

C

None (onlyif you haveno FCPC)

UE-Medium

UE-Large

UV-Small

UV-Medium

UV-Large

0

1

2

3

4

5

None

Rubber

EZ-DONSmall

EZ-DONMed

EZ-DONLarge

SpeeD-ON

A

B

C

D

E

F

G

H

I

J

K

None

Snap-TiteAlum

Snap-TiteSST

Snap-TiteBrass

Hansen SST

HansenBrass

Foster Steel

Foster SST

FosterBrass

CejnChrome

Duff-NortonBrass

0

1

2

None

HardCase

SoftCase

C

PremAire Supplied-Air Respirator System*

Note: If you have selected theDual-Supply option, you willneed two of the same Quick-Disconnects. Just put one letterin the part number to indicateyour selection.

PS

Part Number

For firefighters entering confined spaces, operating as part of a HAZMATteam, or working in platform aerial oper-ations, MSA offers industry-leading air-line respirators for the fire service.

The PremAire® Cadet and PremAireRespirator System offer simple solutionsto air-line respirator needs. Featuring theUltra Elite facepiece and Firehawk MMR(mask-mounted regulator), the PremAirefamily of air-line respirators allows firefighters to use the same facepiece astheir FireHawk Air Mask. MSA also has all the parts, air-line hose, fittings,and accessories you need to build a complete supplied-air system.

PremAire Cadet RespiratorsFirehawk MMR PTC Firehawk MMR STC Case

w/30'' IP hose w/42'' IP hose w/30'' IP hose w/42'' IP hose

10054790 10054791 10054794 10054795 No

10054782 10054783 10054786 10054787 Yes



Evolution 5200 TIC Performance

Only MSA delivers High Sense image quality up to 320°F, the range that 80% of the time matches the temperature range in most structural fires. In addition, only MSA delivers increased sensitivity in Low Sense mode withbetter high temperature image quality. The shaded color in both High andLow Sense indicates the Evolution 5200's new Heat Seeker PLUS.

Evolution 5000 TIC Performance

The Evolution 5000 TIC has an expanded range of High Sensitivity mode—up to 300°F. Though lower than its successor, the Evolution 5000 outperformscompetitive TICs by giving over 100° more High Sense range than competi-tive TICs. Also, notice how the Evolution 5000 has heat-seeking colorized pixels in both High and Low Sense modes. Both the Evolution 5000 and theEvolution 5200 also have a 15% saturation rate, compared to competitiveTICs, which can have saturation rates less than 1%. This means that theEvolution TICS can deliver high quality images in higher temperatures thancompetitive TICs.

Competitive Performance

The limited High Sense temperature range on competitive TICs means that better image quality is lost sooner. Low Sense then becomes the stan-dard operating mode, using only a fraction of the total available sensitivity. In addition, competitive TICs lack Heat Seeking color in High Sense mode, an important tool to determine the presence and direction of the fire.

Low Cost – High Value

As Fire Service TICs become more affordable, MSA again takes the lead byadding new features and increasing performance – while lowering both ini-tial and lifetime costs. Only MSA offers a 2-year sensor warranty—twice thecoverage of competitive TICs! The increased value of MSA TICs is realizedthrough expanded TIC uses, time saved and SAFETY – every day!

Also – Only From MSA:• Instant On

• Instant Mode Switching

• Warnings on all Shut Downs

• Shutter Indicator

• Temp Bar and Digital Temp

• 15% Low Sense Activation

Evolution® Thermal Imaging Cameras (TICs)

Durability: MSA designs, manufactures and tests to existing standards that include:

•Water/Dust Ingress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .International Standard CEI, IEC 529, IP 67 Classification

•Direct Flame/Heat Exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Simulated NFPA 1981-2002 Edition, NFPA 1982-1998

•Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Edition MIL-STD-810E Category 1 Loose Cargo

•Radio Frequency Interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Transport CE/EN 50081-2:1992, EN 50082-2:1992, FCC

•Rollover (Truck Charger) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Part 15 Simulated NFPA 1901-12, 1.7

Comparison of Fire Service TIC Performance*

High and Low Sensitivity

Most TICs generate thermal images in either High Sense or Low Sensemodes, depending on the temperature of the scene. High Sense modedelivers the best image quality – but has a limited temperature range.Low Sense mode trades image quality for a wider temp range to keepthe TIC working in high heat.

0 50 100 150

Sen

sitiv

ity

Low Sense

HighSense

0 50 100 150 200 250

Sen

sitiv

ity Widest

High Sense

Competitive TIC Performance• Limited Temp Range in High Sense

• Temp Range is below 300ºF

• Some models have limited High Sense

• No Heat Seeking Color in High Sense

• Limited Sensitivity in Low Sense

New Evolution 5200 Performance• Widest High Sense Temp Range

• Highest Low Sensitivity

• Heat Seeker PLUS color detail

300 350 400 450 500 550 600 650 700 750 800 850 900 950 10001040°FTemperature Range

Narrow

Hig

hest

Heat SeekerPLUS

Low Sense

200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950°FTemperature Range

Only on the MSA Evolution 5000 TIC

• High Sensitivity up to 300˚F

• Heat Seeker Color in High Sensitivity

• Hot Objects up to 15% of the High Sense Image

• Instantaneous Scene Dynamic Range of 2700

350300 400 450 500 550 600 650 700 750 800 850 900 932˚F

Low Sensitivity

Evolution 5000 Performance Graph

High Sensitivity

300˚F Range

0 50 100 150 200 250

* For additional information on TIC performance, see MSA’s series of Emergency Responder Thermal Imaging Magazines, Bulletins 3400-55, 3400-56, and 3400-57 .



23

Evolution® 5200 TIC

Heat Seeker PLUS in High Sense Mode: Notice multiple heat temperature differences

Evolution 5200 TIC Configurations

Evolution 5200 TIC with 110-220V charger and one battery 10063768

Evolution 5200 TIC with 110-220V charger, Quick-Temp, Heat Seeker, 2 batteries, wrist strap, carrying case and reflective trim kit

10063767

Evolution 5200 TIC with truck-mounted charger, Quick-Temp, HeatSeeker, 2 batteries and wrist strap

10063766

Evolution 5200 TIC with 110-220V charger, Quick-Temp, Heat Seeker, 2 batteries, Retractable Lanyard, carrying case and reflective trim kit

10063765

Evolution 5200 TIC with truck-mounted charger, Quick-Temp, HeatSeeker, 2 batteries and Retractable Lanyard

10063764

Evolution 5200 TIC with 110-220V charger, Quick-Temp, Heat Seeker, 2 batteries, shoulder strap, carrying case and reflective trim kit

10063763

Evolution 5200 TIC with 110-220V charger, 2 batteries and carrying case

10063762

Evolution 5200 TIC with truck-mounted charger and 2 batteries 10063761

Assemble-to-Order (ATO) System: You Make the Choices

The ATO System makes it easy to “custom order” the Evolution 5200 TIC, configured exactly the way you want it. See Bulletin 3400-50-MC for moreinformation.

High Performance Safety

• 320°F High Sense Mode Range – gives high image definition over the widest temperature range of anyFire Service TIC

• Twice the Low Sensitivity in the 320° to +1000°F range, compared to all other Fire Service TICs – for great imaging!

It all adds up to the highest ISDR* of any Fire Service TIC – with clearer, sharper, more detailedimages over the entire temp range.

*Instantaneous Scene Dynamic Range is the combined value of a sensor'ssensitivity and temperature range to determine the number of temperaturedifferences that can be seen at any given instant.

It’s an Evolution – and It’s All About SAFETY!

Introducing the new Evolution 5200 Fire Service Thermal Imaging Camera – with Next Generation Performance and New Exclusive Features available only from MSA!

Exclusive Features

Heat Seeker PLUS – now providing image detail shading Features BenefitsWidest High Sense Operating Rangeon any Fire Service TIC conditions

Provides better performance in high heat.

Highest Low Sensitivity Mode of anyFire Service TIC

Extends the dynamic range for better image distinction at higher scene temperatures.

Quick-Temp TemperatureMeasurement

Gives users a digital temperature measurementalong with a temperature scale measurement todetermine advancing heat.

Heat Seeker PLUS Indicator Allows the user to easily locate hot spots and the seat of the fire. Effective in High and Low Sensitivity.

New Internal Mounting Foam 60% increase in heat tolerance. Protects system electronics from rough handling.Insulates sensor and electronics.

Microbolometer technology (vanadium oxide)

Extremely sharp image.

3-1/2-inch display Team of users gets full view of the action.

Revolutionary ergonomic design Easy handling and integration.

Reflective ID label kit Allows user to personalize the TIC to a specificstation/department with a choice of differentcolor labels.

Unique high-impact bumper protection system

Drop protection from any angle—outstanding durability.

Heat Seeker PLUS in Low Sense Mode: Notice wall and ceiling separation


FIRE SERVICE PRODUCTSEvolution®

5000 TIC

MSA has once again set a new standard in thermal imaging—theEvolution 5000 TIC provides big-time performance in a small format TIC.Designed to be a firefighting tool, the Evolution 5000 TIC combines thefunctionality and durability required of the fire service with advancedfeatures and performance.

Evolution 5000 TIC Configurations (other configurations available, see ATO Matrix)

Evolution 5000 TIC with 100-220 VAC charger and one battery 10040962

Evolution 5000 TIC with 100-220 VAC charger, Quick-Temp, HeatSeeker, 2 batteries, wrist strap, carrying case and reflective trim kit

10040961

Evolution 5000 TIC with truck-mounted charger, Quick-Temp, Heat Seeker, 2 batteries and wrist strap

10040960

Evolution 5000 TIC with 100-220 VAC charger, Quick-Temp, Heat Seeker, 2 batteries, Retractable Lanyard, carrying case andreflective trim kit

10040939

Evolution 5000 TIC with truck-mounted charger, Quick-Temp, Heat Seeker, 2 batteries and Retractable Lanyard

10040938

Evolution 5000 TIC with 100-220 VAC charger, Quick-Temp, Heat Seeker, 2 batteries, shoulder strap, carrying case and reflective trim kit

10040937

Evolution 5000 TIC with 100-220 VAC charger, 2 batteries and carrying case

10040936

Evolution 5000 TIC with truck-mounted charger, 2 batteries and carrying case

10040935

Evolution 5000 TIC with 100-220 VAC charger, Quick-Temp°C, HeatSeeker, 2 batteries, wrist strap, carrying case and reflective trim kit

10040933

Accessories for the Evolution 5000 TIC

AC Charger with cigarette lighter adapter 10041100

Lithium Ion Battery 10038412

Truck-Mounted Charging System 10067565

Wrist Strap 10039516

Shoulder Strap 10039515

Retractable Lanyard 10040226

Carabiner 10040005

Sun Shroud 10039603

Reflective Trim Kit 10040163

Disposable Display Covers 10038970

Non-Charging Mounting Bracket 10067707

Locking Carabiner SRCA613

External transmitter 10047573

Features BenefitsMicrobolometer technology (vanadium oxide)


3-1/2-inch display Team of users gets full view of the action.

Revolutionary ergonomic design Easy handling and integration.

Optional Heat Seeker Indicator Rapid identification of combustion source.



Bright, easy-to-read LED indicators

Minimum confusion in "heat of battle"

Optional Quick-Temp Indicator Easy identification of relative temperatureof surrounding surfaces

Optional Truck-MountedCharging System

TIC is easily accessible and at the ready

Lithium Ion Battery System Lightweight, excellent run time

Evolution 5000 Series Universal Truck ChargerView through Evolution 5000 TIC



25

Remote Wireless Video Transmission

MSA’s Remote Wireless Video Transmission Systems are modular high-performance systems which allow transmission of video signals from the Evolution TICs to fully contained receiving stations.

State-of-the-art 2.4 GHz technology and electronic and imaging components ensure that theRemote Wireless Video Transmission System provides optimum performance for the firefighter.The systems operate at one of two user-selectable frequencies and have been integrallydesigned to allow for maximum user flexibility.

Tactical Thermal Imaging Training for Firefighters

Available from:

SAFE-IR, INC.P.O. Box 297Montgomery, NY 12549Phone Toll-Free 1-877-472-3347www.SAFE-IR.com

Thermal Imaging is a valuable tool for the fire service,but should not be relied upon as a sole means ofnavigation and should not be used in place ofstandard firefighting practices. It is recommendedthat you obtain specialized fireground training prior tousing any TIC in an actual fire or emergency situation.Training can be obtained through local or state firetraining academies, several private training entities,or fire service distributors.

Evolution 4100 TICsEvolution 4100 with Quick Temp, Heat Seeker, Transmitter, Standard Charger

10057641

Evolution 4100 with Quick Temp, Heat Seeker, Standard Charger 10057642

Evolution 4100 with Quick Temp, Heat Seeker, Transmitter, Truck Charger

10057643

Evolution 4100 with Heat Seeker, Transmitter, Truck Charger 10057609

Evolution 4100 with Heat Seeker, Standard Charger 10057610

Evolution 4100 with Truck Charger 10057701

Evolution 4100 with Heat Seeker, Quick Temp, Truck Charger 10057702

Evolution 4100 with Heat Seeker, Transmitter 10057703

Demo Unit: Evolution 4100 with all accessories 10057704

Evolution 4100 with Quick Temp Celsius, Heat Seeker, Transmitter,Standard Charger

10057719

Part Numbered configurations with a Truck Charger include a Wrist Strap.

Part Numbered configurations with a Standard Charger include Carrying Case, Shoulder Strap andReflective Trim Kit.

Use the Assemble to Order (ATO) Configurator (Bulletin 3400-48-MC) to order customized configurations.

Accessories for the Evolution 4000-Series TIC

Evolution 4000-Series Vehicle-Mounted Charging System 10034902

Vehicle Mounting Bracket for Evolution 4000-Series TIC 10036108

Bunker Clip/Wrist Strap 10022505

Standard Shoulder Strap 10022532

FDNY Shoulder Strap 10028850

NiMetH Battery 10016001

Standard Battery Charger – 2 slots 10016301

Cigarette Lighter Adapter (charger) 10016304

Disposable Display Covers (3/pkg) for Evolution 4000-Series TIC 10032955

Sun Shroud 10041800

Evolution® 4100 TICThe Evolution 4100 TIC combinesour patented popular design witha proven high-performancevanadium oxide microbolometersensor. Its dual-handle designand 5" display provide function-ality and ease of use not found incompetitive TICs. With thecapacity for two batteries, theEvolution 4100 TIC allows up to 5hours of continuous operation.The heat seeker and digital tem-perature readout features pro-vide even more valuable infor-mation to the firefighters usingthe camera. A full line of accessories, such as the truck-mounted charger, are also available for Evolution 4100 TIC. SeeBulletin 3400-37-MC for product specifications.

Remote Wireless Video TransmissionDeluxe Receiver Kit – Includes receiving station and integrated 12" display, magnetic-mounted omni-directional antenna, wall-type and cigarette lighter power supplies, and BNC to RCA adapters in a hard-sided Pelican case

10048135

Mini Receiver Kit – Includes receiver, magnetic-mounted omni-directional antenna, wall-type and cigarette lighter power supplies, connection cable for external monitor, and BNC to RCA adapters in a soft-sided, easily transported case

10048134

Optional High Gain directional antenna with tripod mount 10019650

10-ft video BNC cable 10020290

Evolution 5000 External Transmitter 10047573

Features BenefitsMicrobolometer technology (vanadium oxide)


Large-screen display Team of users gets full view of the action.

Revolutionary ergonomic design Superior balance and easy handling.

Heat Seeker Indicator Rapid identification of combustion source.



Easy-to-read indicators on videodisplay

Minimum confusion in "heat of battle"

Reflective logos/labels Easy to locate in dark environments

Optional Quick-Temp Indicatorwith Digital TemperatureMeasurement

Easy identification of relative temperature of surrounding surfaces

Optional Remote Wireless VideoTransmission System

Seamless communication to incident command

Optional Vehicle-MountedCharging System

TIC is easily accessible and at the ready


Since 1836, Cairns has been the original manufactur-er of leather firefighting helmets. Today, Cairnsleather helmets retain the same authentic look andquality that generation after generation of firefightershave relied upon. And now, these helmets are alsomade with the added protection necessary fortoday’s standards of safety in the firefighting industry.

Cairns also applies the same tradition of excellenceto its newer lines of firefighting helmets. Both traditional and modern designs feature the very bestin contemporary high-tech materials, such as

Cairns® Fire Helmets: Quality Craftsmanship Since 1836lightweight but durable fiberglass/Kevlar composites. The versatile Structural Helmet is made of tough high-temperature thermoplastic.

All helmets are available with many options,depending on the specific helmet model, such as achoice of colors, brim size, chinstraps, liner material,etc. Also, a variety of accessories is available tocomplement Cairns fire helmets. Faceshields, goggles, ear/neck protection, and fronts can all beselected to configure the exact helmet you need.

Leather Helmets

The original leather helmet, individually hand-crafted to meet today’s OSHA and NFPA standards with over 165 yearsof dependable performance.

Leather Helmet Features & Benefits

• Hand-crafted, 100% leather shell.

• Insurance against fireground damage withCairns’ 5-year shell replacement warranty.

• Non-corroding, high-temperature, glass-filledpolymer faceshield/goggle hardware.

• Faceshield wing protectors for extra faceshieldreinforcement.

• Nomex chinstrap with one-hand quick releasebuckle and postman slide allows quick and easyadjustment.

• Choice of Nomex or PBI/Kevlar earlap forincreased neck/ear coverage and protection.

• High-temperature foam cap increases thermaland impact protection.

• Market-leading 5-year shell replacementwarranty.

• Non-corroding, high-temperature-resistant,faceshield/goggle hardware.

• Rugged, high-temperature edge will not meltor drip.

• Easy front headband adjustment for properSCBA mask fit.

• Simple rear ratchet height adjustment to fit allhead sizes.

• Headband fits a wide variety of head sizes.

• Durable helmet hanger fits on large hooksand resists bending.

• Minimal parts for lower service cost and eas-ier maintenance.

• Exclusive shell release system for an extramargin of safety (except 880).

• Unique tube-lock system absorbs the shockof an impact.

Traditional Helmet Features & Benefits

Traditional Helmets

Traditional style combined with high-tech performance.

N6A Houston(NFPA approved)

• High-temperature impact cap liner resists distortion at high temperatures.

• Comfortable fit for all head sizes between 6-3/8 inches and 8-3/8 inches.

• Large diameter helmethanger fits on largerhooks and racks.

N5A New Yorker(OSHA approved)

Cairns® 1010

Classic™ 1000

Cairns® 10144

880 Tradition


For ordering information, replacement parts and accessories, see the 2006 Fire Helmets Catalog(Bulletin 3600-01-MC) or contact your MSA Fire Service Distributor.

For ordering information, replacement parts and accessories, see the 2006 Fire Helmets Catalog(Bulletin 3600-01-MC) or contact your MSA Fire Service Distributor.



27

• Market-leading 5-year shell replacementwarranty.

• Non-corroding, high-temperature-resistant, faceshield/goggle hardware.

• Rugged, high-temperature edge will notmelt or drip.

• Easy front headband adjustment for proper SCBA mask fit.

• Simple rear ratchet height adjustment tofit all head sizes.

• Headband (6 3/8 to 8 3/8) fits a wide variety of head sizes.

• Durable helmet hanger fits on large hooksand resists bending.

• Minimal parts for lower service cost and easier maintenance.

• Exclusive shell release system for anextra margin of safety (except 360S andHP3).

• Unique tube-lock system absorbs theshock of an impact (except 360S).

Modern Helmet Features & Benefits

Modern Helmets

Different models for appplications such asstructural firefighting, EMS/rescue andwildland firefighting.

Commando® HP3 Intruder 990®

Structural 360S®

660C Metro®

Invader™ 664

Made with your choice of high-gloss patent leather or dull-finish genuine leatherreinforced with a high-temperature, shrink-resistant back layer and sewn with high-temperature, fire-retardant Nomex thread.

The Choice Is Yours!

Standard fronts offer over 27 million possibleconfigurations! Design your own standardfront by choosing from the options and thenindicating your preferences by calling 1-877-MSA-FIRE to place your order.

Crash Fire Rescue (CFR) Proximity System• Easy to don and doff, this CFR System

is compliant with NFPA 1976–2000.

• Designed and approved for use with the Metro 660C, Invader 664, Cairns 1010 and Cairns 1044 Fire Helmets, it will not interfere with the SCBA while in use.

• Components consist of an aluminized PBI/Kevlar layer, vapor barrier and inner layer.

Standard Fronts

Phoenix 660®For ordering information, replacement parts and accessories,see the 2006 Fire Helmets Catalog (Bulletin 3600-01-MC) orcontact your MSA Fire Service Distributor.

The Wildland T Firefighters’ Helmet from MSA provides excellent protectionfor workers who must fight fires in forest, field and woodland environments.

Both Wildland T hat and cap models can be equipped with a choice ofNomex ear/neck protectors or Nomex ear/neck/throat protectors. The helmets’ new ultra-lightweight thermoplastic construction ensures optimumcomfort during extended periods of firefighting in the outdoors.

They are SEI-certified and meet or exceed all applicablerequirements of ANSI Standard Z89.1 (Class E) 2003 and NFPA 1977–1998.

For more details, ask for Bulletin 0606-15-MC.

Certified NFPA-compliant.

Wildland® T Firefighters’ Helmets

Wildland T Cap with chinstrap Wildland T full-brimmed Hat with chinstrap


FIRE SERVICE PRODUCTSPyrenees™ Protective Eyewear

• Dual injection soft tip temples

• Available in several frame and lens colors

• Full side protection

• Meets Z87+ and CSA Z94.3.

Aurora™ Protective Eyewear

• 9-base curved lens

• Spring-comfortadjustable nose bridge

• Soft-end temples

• Vertical temple adjustment

• Anti-fog replaceable lens(blue mirror, hard coat lens only)

MAG™ Series Protective EyewearMagnification Built Right In

• Full side protection

• Duel-injected soft tip temples

• A choice of three bifocal powers:1.5, 2.0 and 2.5

• Polycarbonate lens for high impact and 99.9 UVprotection

• Ergonomic temples for better fit and comfort

MAG Series EyewearMag 1.5 Clear lens, black frame anddiopter strength of 1.5

10068832

Mag 2.0 Clear lens, black frame anddiopter strength of 2.0

10065847

Mag 2.5 Clear lens, black frame anddiopter strength of 2.5

10068833

• 99% UV protection

• Polycarbonate lenses for high-impact protection

• Temples and frame flex to fit a wide variety of faces

• Hard-coated lenses

• A choice of clear, gray, amber, “180 blue” mirror and “sky orange” mirror lenses

Easy-Flex EyewearClear lens, blue-gray frame 10070917

Gray lens, blue-gray frame 10070918

Amber lens, blue-gray frame 10070919

“180 blue” mirror lens, blue-gray frame 10070920

“Sky orange” mirror lens, metallic sandframe

10070921

Eyewear Cleaning Accessories

Eyewear AccessoriesPre-Moistened Towelettes (box of 100) 10022087

Tradewind™ Protective Eyewear

• Indoor-outdoor light gold or clear lens

• Tuff-Stuff™ scratch-resistant lens coating

• Adjustable temples and integrated side shields

• Brow protection

• UV-400 protection (mirrored lens only)

Tradewind EyewearTwo-tone temple, light gold lens 697506

All black temples, clear lens 10002545

Protective Eyewear for Emergency Services

Pyrenees EyewearClear lens, black frame 10033716

Gray lens, black frame 10033717

Amber anti-fog lens, black frame 10033740

Clear anti-fog lens, black frame 10033718

Gray anti-fog lens, black frame 10033719

Aurora EyewearClear anti-fog lens, black frame 10026005

Gray anti-fog lens, black frame 10026006

Amber anti-fog lens, black frame 10026007

Blue anti-fog lens, black frame 10026008

Black pouch only, for Aurora 10034943

Easy-Flex™ Protective EyewearFlex for a Comfortable Fit

Box of 100 pre-moistenedtowelettes.

Belt loop-style pouch toprotect your eyewear



29

HPE Headband Model (NRR – 26dB)

Designed specifically for very high noise lev-els, the powerful Muff/Cap Model is ideal forairfields, power plants and other areas withintense noise. The HPE Muff/Cap Model pro-vides the highest-rated protection available for low-frequency environments. A paddedheadband and super-soft ear cushions guar-antee all-day comfort while ensuring full-time protection.

EXC Headband Model (NRR – 24dB)

The ear muff is so comfortable that youalways want to wear it. Unique injectionmolded inserts provide excellent attenuationand maximum space for the ears inside thecap. Headband model offers force adjust-ment for individual fit. The helmet-mountedversion has a spring design that offers lowpressure tension and a high level of comfort.

CutOff Pro Headband Model(NRR – 24dB)

Built-in level dependent function protectswithout your feeling isolated

• Lets through speech and other harmlesssounds while protecting you from harmfulnoise

• Battery life of 1000 hours

• Amplification of weak sounds

• Auxilliary input for connection if externaldevices

Headband ModelsHPE—headband model 10061271

Hygiene Kit for HPE, complete with cushions and inserts 10061291

EXC—headband model 10061229

Hygiene Kit for EXC, complete with cushions and inserts 10061292

CutOff Pro—headband model 10061278

Hygiene Kit for CutOff Pro, complete with cushions and inserts 10061293

Downleads for CutOff Pro Model

3.5 mm Stereo Plug 10061538

3.5 mm Mono Plug 10061539

2.5 mm Mono Plug 10061540

Hands Free, 2.5 mm Stereo Plug 10062072

Hearing ProtectionReusable Ear Plugs

Tri-Seal™ Reusable Silicone Ear Plugs(NRR – 25dB)

Ruggedly designed, made ofsoft, comfortable silicone,these reusable ear plugs areeasy to insert in the ear and economical. They offer protection comparable to many MSA earmuffs. Tri-Seal corded plugs are available in dispenser boxes of 100 individuallypackaged pairs.

Disposable Ear Plugs

FormFit™ Disposable Foam Ear Plugs(NRR – 28dB)

For users who prefer todispose of their plugsafter each use, theFormFit plug is theanswer. Easy to use and affordable, FormFitear plugs offer veryaggressive noise reduction while beingvery comfortable to wear. Available in cordedand uncorded versions, in dispenser boxes of200 pair.

Ear PlugsReusable Ear Plugs (NRR 31dB)

Tri-Seal Silicone Ear Plugs (corded)Dispenser box (suitable for wall hang-ing) of 100 individ. packaged pairs

10005607

Disposable Ear Plugs

Conical-Shaped Ear Plugs (NRR-31dB)

FormFit Disposable Molded UrethaneFoam Ear Plugs (non-corded) DispenserBox (suitable for wall hanging) of 200individually packaged pairs

10051348

FormFit Disposable Molded UrethaneFoam Ear Plugs (corded) Dispenser Boxof 200 individually packaged pairs

10051347

Round Ear Plugs (NRR-29dB)

FormFit Urethane Foam Ear Plug, (non-corded) Dispenser Box of 200 individually packaged pairs

10009333

FormFit Urethane Foam Ear Plugs (corded) Dispenser Box of 200 individually packaged pairs

10009332

HPE HeadbandModel

EXC HeadbandModel

CutOff ProHeadband Model

conical shape

round shape


FIRE SERVICE PRODUCTSSOLARIS® FIRE Multigas DetectorThe Solaris Fire Multigas Detector is an affordable, durable, reliable, easy-to-use portable instrument for detecting the presence of O2,H2S,CO and combustible gas. It is designed to withstand rough handlingin harsh environments. Best of all, it delivers MSA’s commitment to quality at the smallest size and, evensmaller price!

The Solaris Fire Multigas Detector is ergonomically designed and provides the best value in its class. At alow, competitive cost, it provides state-of-the-art engineering and the high quality you’ve come to expectfrom MSA.

• Unobtrusive lightweight design—weighs under 8 oz. and measures 4-1/2"H x 2-1/2"W x 1-1/4"D

• Rugged construction—performs reliably in the harshest environments

• Easily configured by the user to detect up to four gases simultaneously—users can also easily modifymost instrument functions

• World-class alarm system—high-intensity LED visual alarms, audible alarm, strong vibrating alarm

• Versatile display—backlighting provides exceptional contrast, alphanumeric message bar

• Simple calibration—intuitive and accomplished with the push of a single button

• Long-life battery—rechargeable lithium ion battery provides 14+ hours of continuous operation, or 3 AA alkaline batteries continuously operate the unit for 12+ hours

• Galaxy™ Test System compatibility—automatically calibrate instruments and track calibration records

• Optional sampling pump

• Two-year, all-inclusive warranty

Solaris Fire Kits

All kits include configured, datalogging, UL/cUL approved SOLARIS FIRE instrument with charger,calibration cap assembly, instruction card and manual on CD-ROM, a convenient to stow, durablered carrying case, and a nylon orange instrument carrying case free of charge!

See pages 44–50 for calibration accessories.

Solaris Fire Multigas DetectorsSolaris Fire with Lithium Battery

Solaris Fire with AlkalineBatteries

Standard Kits (include datalogging options)*

4- Gas Instrument 10071201 10071209

3-Gas Instrument (LEL, O2, CO) 10071202 10071210

Industrial Kits (include Econo-Cal kit and datalogging option)*

4- Gas Instrument 10071203 10071211


Deluxe Kits (include sampling pump, Econo-Cal kit and datalogging option)*

4- Gas Instrument 10071205 10071213


* To download the Solaris data, the MSA data docking module (P/N 710946) must also be purchased.

Replacement Parts and Accessories Part No.

4-Gas (CO, H2S, O2 & Combustible) Sensor replacement kit 10049406

Replacement CO Sensor 10046944

Replacement H2S Sensor 10046945

Replacement O2 Sensor 10046946

Replacement Combustible Sensor 10046947

Pre-Filter for CO sensor 10047967

Protective felt for sensor inlets 10044927

Cover label for empty sensor location 10049052



31

Solaris Fire Multigas Detector Assemble-to-Order (ATO) OptionsA. Datalog Options

The datalog option enables the Solaris Fire Multigas Detector to store exposure data for easyretrieval at a later time.

To download the Fire Solaris data, the MSA datalog kit (p/n 710946) must also be purchased.

Datalog Options Code

Standard Rechargeable Instrument D(includes datalogging)

Standard Alkaline Instrument B(includes datalogging)

B. Combustible Sensor Options

If a combustible gas sensor is desired, two options are available: 0-100% LEL or 0-5% CH4.

Combustible Semsor Options Code

None 0

0–100% LEL L

0–5% CH4 M

C. Oxygen Sensor Options

To choose to have an oxygen sensor installed in your new Solaris Fire Multigas Detector, chooseselection 1. For no oxygen sensor, enter a “0”.

Oxygen Sensor Options Code

None 0

O2 Sensor 1

D. Carbon Monoxide Sensor Options

To choose to have a carbon monoxide sensor installed in your new Solaris Fire Multigas Detector,choose selection 1.

For no carbon monoxide sensor, enter a “0”.

Carbon Monoxide Sensor Options Code

None 0

CO Sensor 1

E. Hydrogen Sulfide Sensor Options

To choose to have a hydrogen sulfide sensor installed in your new Solaris Fire Multigas Detector,choose selection 1.

For no hydrogen sulfide sensor, enter a “0”.

Hydrogen Sulfide Sensor Options Code

None 0

H2S Sensor 1

F. Sampling Pump

It is now possible to combine the sampling pump and probe for the Solaris Fire unit into one easy-to-use accessory. The pump probe is very versatile and can be attached to the Solaris Fire instru-ment in seconds. The built-in Water Stop® filter helps to ensure the sampling system is not contaminated with dirtand debris during use.

Sampling Pump Code

None 0

Universal pump probe 1

G. Calibration Kits

MSA provides two options for performing instrument calibration. The cost-effective Econo-Cal (34liter) cylinder and fixed flow regulator provide an economical means to calibrate the Solarisinstrument. The Model RP calibration kit also has a fixed flow 0.25 lpm regulator and provides theuser with a larger capacity (58 liter) calibration gas cylinder.

Calibration Kit Options Code

None 0

Econo-Cal Calibration Kit 1

Model RP Calibration Kit 2

H. Instrument Approvals

It is now possible to select the specific type of approval that a Solaris Fire instrument possesses.Default approval for North America will be granted by Underwriters Laboratory (UL). The SolarisFire UL approval label is recommended for the United States and Mexico. The Solaris Fire CSAapproval label is recommended for Canada.

Instrument Approvals Code

Underwriters Laboratory (UL) U

CSA C


The ATO System makes it easy to “custom order” the Solaris Multigas Detector, configured exactly the way you want it. You can choose from an extensiveline of base instrument components and accessories. See the ATO chart below to make your selections.

A-SOLFIRE-

Your Model Part Number

- - - - - - -

Please write in numbers from selections above in appropriate boxesand contact your MSA Fire Service distributor to place your order.

Selection … A B C D E F G H


FIRE SERVICE PRODUCTSSirius® PID Multigas Detector for the Fire Service

One PID, Four Gases...Detects Hundreds of Chemicals

The Sirius Multigas Detector provides the solution you have looked for in one complete package; incredibleperformance, maximum simplicity, and durable design all with MSA’s commitment to quality.

Sirius Multigas Detector KitsPart # 10.6

eVLEL 02 CO H2S Li

ChrAlkaBat

VehChr

10 'line

10 'Tef

1'probe

RetrClip

RedBoot

CorJac

CalKit

DlinkKit

RedCase

StdLpCap

LTSCase

CleanKit

Deluxe FS LEL 4-Gas Lithium Ion PID 10051155 X X X X X X X X X X X X X

Deluxe FS LEL 3-Gas H2S Lithium Ion PID 10051156 X X X X X X X X X X X X

Deluxe FS LEL 3-Gas CO Lithium Ion PID 10051157 X X X X X X X X X X X X

Deluxe FS LEL 4-Gas Lithium Ion PID Datalog 10051158 X X X X X X X X X X X X X X

Deluxe FS LEL 4-Gas Alkaline PID 10051159 X X X X X X X X X X X X X

Deluxe FS LEL 3-Gas H2SAlkaline PID 10051160 X X X X X X X X X X X X

Deluxe FS LEL 3-Gas COAlkaline PID 10051161 X X X X X X X X X X X X

Deluxe FS LEL 4-Gas Lithium Ion/Alk PID DLog 10051162 X X X X X X X X X X X X X X X

Std FS LEL 4-Gas Lithium Ion PID 10051163 X X X X X X X X X X X X

Std FS LEL 3-Gas H2S Lithium Ion PID 10051164 X X X X X X X X X X X

Std FS LEL 3-Gas CO Lithium Ion PID 10051165 X X X X X X X X X X X

Std FS LEL 4-Gas Alkaline PID 10051166 X X X X X X X X X X X X

Std FS LEL 3-Gas H2S Alkaline PID 10051167 X X X X X X X X X X X

Std FS LEL 3-Gas CO Alkaline PID 10051168 X X X X X X X X X X X

Std FS LEL 4-Gas Lithium Ion PIDno case 10051169 X X X X X X X X X X X

Std FS LEL 4-Gas Lilon/Alk PIDno jackets DLog 10051170 X X X X X X X X X X X X X

Econo FS LEL 4-Gas Alkaline PID 10051151 X X X X X X X

Econo FS LEL 3-Gas H2SAlkaline PID 10051152 X X X X X X

Econo FS LEL 3-Gas COAlkaline PID 10051153 X X X X X X

Econo FS LEL 4-Gas Lithium Ion PID 10051154 X X X X X X X

First Responder 4-Gas PID 10051176 X X X X X X X X X X X X X X X X X X

First Responder FS 4-Gas PID 10051175 X X X X X X X X X X X X X X X X X

Tremendous Flexibility

Users are able to simultaneouslymonitor for volatile organic com-pounds with low vapor pressureswhile measuring for combustible,toxic and oxygen deficient atmospheres within one reliable,easy-to-use, durable unit.

Reliable PID performance

Integrating proprietary PID sensordesign (patent pending) into ourproven reliable multigas detectordesigns, such as the designs usedin the Orion and Solaris 4-gasmultigas detectors, make thiscombination a dependable winnerand allows users to get their moni-toring done reliably and quickly.

User friendly software

Easy-to-use software allows usersto focus on their tasks at hand.

Superior patent pending PIDsensor design

Superior PID sensor designreduces maintenance time andcost.

Flexible configurations

This design combines two instruments into one.

Loud, attention grabbingalarm system

The Sirius Multigas Detector provides outstanding alarms toclearly warn users of a hazardoussituation.

Interchangeable lithium-ion and alkaline battery packs

Keep instruments running 24 hours a day, 7 days a week.

Easy calibration and compatibility with MSA’s Total InstrumentManager

Increase user safety by easilyensuring proper sensor performance.




33


The ATO System makes it easy to “custom order” the Sirius Detector, configured exactly the way you want it. You can choose from an extensive line of baseinstrument components and accessories. See the ATO chart below to make your selections.

Selection …

A-SIRIUS - A B C D E F G H I J K L M N O

A. Photoionization Detector Lamp OptionTo choose the standard 10.6 eV lamp formost VOCs, choose selection A. For thelow energy 9.8 eV lamp with the most VOC discrimination, enter selection B.

Photoionization Detector Lamp CodeNone 0PID with 10.6 eV Lamp (0–2000 ppm) APID with 9.8 eV Lamp B

B. Combustible Sensor OptionTo choose to have your MSA 20L combustible sensor reading set to be displayed as 0–100% LEL, enter selection“L”. For a display of 0–5% methane, enteran “M”.

Combustible Sensor CodeNone 00–100% LEL Pentane L0–5% LEL Methane M

C. Oxygen Sensor OptionsTo choose to have an oxygen sensorinstalled in your new Sirius Fire MultigasDetector, choose selection 1. For no oxy-gen sensor, enter a “0”.

Oxygen Sensor CodeNone 0O2 (0–25%) 1

D. Carbon Monoxide Sensor OptionsTo choose to have a carbon monoxide sensor installed in your new Sirius FireMultigas Detector, choose selection 1.For no carbon monoxide sensor, enter a“0”.

Carbon Monoxide Sensor CodeNone 0CO Sensor (0–500 ppm) 1

E. Hydrogen Sulfide Sensor OptionsTo choose to have a hydrogen sulfide sensor installed in your new Sirius FireMultigas Detector, choose selection 1.For no hydrogen sulfide sensor, enter a“0”.

Hydrogen Sulfide Sensor CodeNone 0H2S Sensor 1

F. Battery Pack & Charger OptionYou may choose between MSA’s lithium ion battery pack which includes a stan-dard lithium ion battery charger, or the convenienve of an alkaline battery pack. You may also choose to have both batterypack types included with your new SiriusMultigas Detector.

Battery Pack/Charger CodeNone 0Lithium ion, includes charger Aand cordReplaceable alkaline BBoth lithium ion and replaceable Calkaline battery packs

G. Vehicle Charger OptionIf you would like to order the vehicle charger for your new Sirius MultigasDetector, choose selection “1.”

Vehicle Charger CodeNone 0Vehicle Charger 1

H. Sampling LinesMSA’s Quick-Connect sampling lines are ofthe highest quality materials, guaranteedto provide accurate sampling concentra-tions. Sirius Multigas Detector samplinglines all include a Quick-Connect air-linefitting for easy attachment and tight seal.For sampling jet fuel, enter selection 3 forthe 10' teflon sampling line option, orselection 4 for the 25' sampling line option.

Sampling Lines CodeNone 010-foot polyurethane 125-foot polyurethane 210-foot teflon (for jet fuel sampling) 325-foot teflon (for jet fuel sampling) 43-foot polyurethane coiled 5

I. Sampling ProbesMSA’s sampling probes are durable and comfortable to use. The built-in WaterStop® filter ensures your sampling systemis not contaminated with dirt and debris ifthe probe tip is dipped in water. You mustorder a probe if you order a sampling lineas we strongly recommend you operatethe instrument with this filter in place.

Sampling Probes CodeNone 01-foot probe 13-foot probe 28-inch probe 3

J. Carrying AttachmentsWhile a high-strength stainless steel D-Ring is offered with this instrument atno extra charge, there are three otheroptions for handling the instrument: theretractable carrying line for use with theD-Ring, the shoulder harness and thewrist harness to be used on the user’sarm with a Level A suit.

Carrying Attachments CodeNone 0Retractable carrying line with 1

belt clipShoulder harness 2Wrist harness 3

K. Instrument Jacket and BootsTo offer the highest level of of instrument protection, you may choose a protectivered rubber boot and harness, or a cordu-ra jacket. You may also order bothoptions by choosing selection C.

Instrument Jacket/Boot CodeNone 0Red boot with harness BCordura jacket with harness C

L. Calibration KitsYou may choose one of two calibrationoptions for your Sirius Multigas Detector. The fixed-flow .25 lpm regulator includes a multigas calibration cylinder and alsoan isobutylene calibration gas cylinder ifa PID selection is chosen. You may alsoorder just the isobutylene calibration kitwith gas cylinder.

Calibration Accessories CodeNone 0Econo-Cal Fixed-Flow 1

Regulator Calibration Kit(includes multigas and isobutylene cylinders)

Model RP Fixed-Flow 2Regulator Calibration Kit(includes multigas and isobutylene cylinders)

Isobutylene Calibration Kit 3(includes gas cylinder)

M. Data Communication KitIf you need to track the readings and operation of your Sirius MultigasDetector, consider ordering the instrument with the optional built-in datalogging module. This option alsoprovides STEL and TWA capabilities.

Data Communication CodeNone 0Data link module 1Data link module and 2software kit

N. PackagingYour new Sirius Multigas Detector may be protected by a standard red plasticcase, or by a black premium field case.You may also choose the option of a long-term storage kit case for emergency response, large enough tohold the Sirius Multigas Detector, calibration cylinders, spare sensors,spare PID lamp and lithium ion batterypack with charger, spare alkaline battery pack, lamp cleaning kit and simple-to-read and understand refresherinstructions.

Packaging CodeStandard shipping carton 0Standard red PVC case 3Premium black field case 2Long-term storage kit case 4Long-term storage kit basic 5includes PID lamp

O. PID Lamp CapThe standard easy-access lamp cap isincluded with your Sirius MultigasDetector at no extra charge. You mayalso choose a tamper-proof lamp cap.

PID Cap Lamp CodeNone 0Standard easy-access lamp cap SAlternative tamper-proof lamp cap T

Sirius Multigas Detector Assemble-to-Order (ATO) Options


Please write in numbers from selections above in appropriate boxesand contact your MSA Fire Service distributor to place your order.



• TIM ® System compatibility

• Large, easy-to-read display

• Durable sensors

• Link™ Software compatibility


The ATO System makes it easy to “custom order” the Orion Multigas Detector,configured exactly the way you want it. You can choose from an extensive lineof base instrument components and accessories. See the ATO chart on thefollowing page to make your selections.


The Orion Multigas Detector is alow-cost, reliable, and easy-to-useportable instrument for detecting thepresence of O2, H2S, CO and combustible gas. It will stand up tothe roughest handling in even thetoughest environments.

Orion® Multigas Detector for the Fire Service

Features• One-button calibration

• Long-life battery

• Carbon-filled nylon case

• Tough, durable construction

• Built-in pump

Approvals

The Orion Multigas Detector has been designed to meet intrinsic safety testingrequirements in certain hazardous atmospheres. The Orion Multigas Detector hasbeen approved by UL and cUL for use in Class I, Division I, Groups A, B, C, and D.

Orion Multigas Detector Kits

DEL

UX

E

Deluxe FS 4-Gas NiMH 10026367 • • • • • • • • • • •

Deluxe FS 4-Gas Alkaline 10026368 • • • • • • • • • • •

Deluxe FS 3-Gas H2S NiMH 10026369 • • • • • • • • • •

Deluxe FS 3-Gas H2S Alkaline 10026490 • • • • • • • • • •

Deluxe FS 3-Gas CO NiMH 10026491 • • • • • • • • • •

Deluxe FS 3-Gas CO Alkaline 10026492 • • • • • • • • • •

Deluxe FS 4-Gas NiMH, Datalog 10030394 • • • • • • • • • • •

STA

ND

AR

D

Standard FS 4-Gas NiMH 10026493 • • • • • • • • • •

Standard FS 4-Gas Alkaline 10026494 • • • • • • • • • •

Standard FS 3-Gas H2S NiMH 10026495 • • • • • • • • •

Standard FS 3-Gas H2S Alkaline 10026496 • • • • • • • • •

Standard FS 4-Gas NiMH, less case 10030421 • • • • • • • • •

Standard FS 3-Gas CO NiMH 10026497 • • • • • • • • •

Standard FS 3-Gas CO Alkaline 10026498 • • • • • • • • •

ECO

NO

MY Economy FS 4-Gas Alkaline 10026499 • • • • • •

Economy FS 3-Gas H2S Alkaline 10026500 • • • • •

Economy FS 3-Gas CO Alkaline 10026501 • • • • •

Economy FS 4-Gas NiMH 10030395 • • • • • •

LEL

O2

CO

H2S

NiM

H B

att/

Cha

rger

Alk

alin

e B

att

Cal

iobr

atio

n C

ap

Inte

rnal

Pum

p

10-f

t Lin

e

1 ft

Pro

be

Cal

ibra

tion

i Kit

Red

Cas

e

Red

Boo

t



35

A-ORION-

Selection …

A. Combustible Sensor OptionTo choose to have MSA’s own long-life 20L combustible sensor installed in yournew Orion Multigas Detector, chooseselection 1. For no combustible sensor,enter a “0.”

Combustible Sensor CodeNone 00–100% LEL Pentane L

B. Oxygen Sensor OptionTo choose to have an oxygen sensorinstalled in your new Orion MultigasDetector, choose selection 1. For no oxygen sensor, enter a “0.”

Oxygen Sensor CodeNone 0O2 (0–25%) 1

C. Carbon Monoxide Sensor OptionTo choose to have a carbon monoxide sensor installed in your new OrionMultigas Detector, choose selection 1. For no carbon monoxide sensor, enter a“0.”

Carbon Monoxide Sensor CodeNone 0CO Sensor (0–999 ppm) 1

D. Hydrogen Sulfide Sensor OptionTo choose to have a hydrogen sulfide sen-sor installed in your new Orion MultigasDetector, choose selection 1. For nohydrogen sulfide sensor, enter a “0.”

Hydrogen Sulfide Sensor CodeNone 0H2S Sensor (0–200 ppm) 1

E. Battery Pack OptionsYou can choose between MSA’s NiMHrechargeable batteries which will run yourOrion Multigas Detector for up to 16 hoursin pump mode and 20 hours in diffusionmode, or you can choose the convenienceof alkaline batteries. For ultimate flexibility,choose “both!”

Battery Pack CodeStandard NiMH rechargeable A(comes with standard AC charger)Replaceable alkaline BBoth NiMH and alkaline C

F. Battery Charger OptionsIf you order your Orion Multigas Detectorwith a rechargeable battery pack, thecharger is included in the price. If youwant the optional vehicular chargeradapter, choose selection “1.”

Vehicle Charger CodeNone/Standard AC charger 0Vehiclular charger 1

G. Sampling MethodsThe Orion Multigas Detector’s patentedPulsecheck™ pump technology leads theindustry. If you chose the built-in pump,operating directly off the instrumentbatteries, you are assured of an audiblepump fault alarm and you do not need tomaintain a second set of batteries. If you are ordering diffusion instruments, acalibration cap will be included to calibrate your instruments.

Sampling Methods CodeNone DIntegral, Pulsecheck pump PManual aspirator module A

H. Sampling LinesMSA’s high speed sampling lines are of thehighest quality materials guaranteed to notalter sample concentration. Screw fittingswith O-Ring couplings at each end ensurethere are no leaks when the system isoperating.

Sampling Lines CodeNone 03-foot coiled 15-foot coiled 210-foot 315-foot 425-foot 5

I. Sampling ProbesMSA’s sampling probes are durable andeasy to use. The built-in Water Stop®

filter ensures your sampling system isnotcontaminated with dirt and debris ifthe probe tip is dipped in water. You mustorder a probe if you order a samplingline as we strongly recommend youoperate the instrument with this filter inplace.

Carrying Attachments CodeNone 01-foot straight 13-foot straight 23-foot, holes near tip 33-foot, holes near handle 4Hot-gas sampling probe 5

J. Carrying AttachmentsWhile a high-strength, nylon clip isoffered with the instrument at no charge,a swivel belt loop kit, which allows quickrelease from your belt with a half turn, isalso available.

Belt Clip CodeUnbreakable nylon 0Swivel belt loop 1

K. Instrument JacketFor the highest levels of environmentaland rough handling protection, you canorder from a variety of jackets and bootsfor your Orion Multigas Detector.

Instrument Jacket CodeNone 0Red Rubber Boot RBlack Leather Case YOrange Cordura Jacket Z

L. Calibration KitsYou can choose one of two calibrationoptions for your Orion Multigas Detector.The flexible RP kit provides a constantflow regulator that is reused and provides the greatest accuracy. The squirt gas test kit provides a veryeconomical means to verify instrumentcalibration.

Calibration Accessories CodeNone 0Model RP Calibration Kit 1(includes gas)Squirt Gas Check Kit 2(includes gas)

M. Data Communications KitIf you need to track the readings and operation of your Orion MultigasDetectors, consider ordering them withthe optional built-in datalogging module.This option also provides STEL and TWAcapabilities.

Data Communications CodeNone 0Orion link module 1Module and download 2

software

N. Packaging Options & Carrying CasesYou can further protect your OrionMultigas Detector with optional carryingcases. For ease of transport and han-dling, these cases can be even beordered to accommodate calibrationaccessories. With the premium cases, asimple to understand training videotapeis included at no extra charge.

Packaging & Carrying Cases CodeStd shipping container only 0Red plastic case w/space 5

for cylinder, with video

Orion Multigas Detector for the Fire Service Assemble-to-Order (ATO) Options


Please write in numbers from selections above in appropriate boxes and contact your MSA Fire Service distributor to place your order.

- - - - - - - - - - - - -A B C D E F G H I J K L M N


FIRE SERVICE PRODUCTSThe Orion G Multigas and Leak Detector is the only instrument you need for detecting combustible gas leaks on appliances, flues and underground pipes. With its internal O2, H2S, CO and LEL sensors, it also is great for confinedspace applications.

Features

Multi-Function Flexibility• Indoor or outdoor (or both)

• Configure any combination of gasesincluding O2, CO and H2S

• For low-level leaks, 0-100% LEL or CH4 0-100% by volume

Bar-Hole Probe Filter Trap• Bar-hole probe filter trap is

designed to keep out water and dirt

• "Quick connect" feature allows userto attach probe or sampling linewhile minimizing the possibility ofair leaks

Superior Design• Sensor is located on the end of a

flexible gooseneck probe, allowingsensor to be placed closer to itembeing tested

• Super-fast response time

• Fits easily and comfortably in thehand

• Intrinsically safe.

Long-Life Battery• Accommodates either a NiMH bat-

tery pack or alkaline batteries

• Provides up to 16 hours of continu-ous instrument operation

Durable Sensors• MSA Series 20L sensor provides

up to 50 times the silicone poisontolerance, considerably expandingsensor service life

• Fast-reacting, solid-state 20G sensor in tip of probe

• All sensors are easy to maintain

One-Button Calibration• Calibration is accomplished with

push of a single button (with appropriate calibration gas)

Tough, Durable Construction• Excellent resistance to penetration

from water and dust

• Weather-resistance rating of IP54

Large, Easy-To-Read Display• One of the largest displays of any

multigas detector on the market

• Backlighting provides exceptional contrast

TIM® Compatibility• TIM (Total Instrument Manager)

System allows users to automati-cally calibrate their instruments andtrack calibration records.

Built-In Pump• Built-in pump for remote sampling

of the environment and fastresponse to leaks.

Orion® G Multigas and Leak Detector

Orion® G Multigasand Leak Detectorwith Flexible Probe

Orion® G Multigas and LeakDetector with Coiled Probe

Deluxe 4-gas 10041472 • • • • • • • • • • • • •Deluxe 3-gas (H2S) 10041473 • • • • • • • • • • • •Deluxe 3-gas (CO) 10041474 • • • • • • • • • • • •Industrial 4-gas 10041475 • • • • • • • • • •Industrial 3-gas (H2S) 10041476 • • • • • • • • •Industrial 3-gas (CO) 10041477 • • • • • • • • •Economy 4-gas 10041478 • • • • • • • •Economy 3-gas (H2S) 10041479 • • • • • • •Economy 3-gas (CO) 10041500 • • • • • • •Supereconomy 4-gas 10041501 • • • • • •Supereconomy 3-gas (H2S) 10041502 • • • • •Supereconomy 3-gas (CO) 10041503 • • • • •

%LE

LOxyg

en

Carbon M

onoxide

Hydro

gen Sulfide

Alkalin

e Battery

Pack

Nimh Batte

ryPack

Vehicle

Charger

Quick Connect

Threaded Connectio

n

5 ftSamplin

g Line

1 ftPro

be

Red Boot

Cordura

Case

Calibra

tion Kit

Datalo

gging

Red Plastic Carry

Case

Orion G Multigas LeakDetector Kits Flexible Probe

Orion G Multigas Leak Detector Kits Coiled Probe

Deluxe 4-gas 10048288 • • • • • • • • • • • • •Deluxe 3-gas (H2S) 10048289 • • • • • • • • • • • •Deluxe 3-gas (CO) 10048290 • • • • • • • • • • • •Industrial 4-gas 10048321 • • • • • • • • • •Industrial 3-gas (H2S) 10048322 • • • • • • • • •Industrial 3-gas (CO) 10048323 • • • • • • • • •Economy 4-gas 10048324 • • • • • • • •Economy 3-gas (H2S) 10048325 • • • • • • •Economy 3-gas (CO) 10048326 • • • • • • •Supereconomy 4-gas 10048327 • • • • • •Supereconomy 3-gas (H2S) 10048328 • • • • •Supereconomy 3-gas (CO) 10048329 • • • • •



37

A-ORION G-


- - - - - - - - - - - - -

Please write in numbers from selections above in appropriate boxes andcontact your MSA Fire Service Distributor to place your order.

Selection … A B C D E F G H I J K L M N


The ATO System makes it easy to “custom order” the Orion G Multigas and Leak Detector, configured exactly the way you want it. You can choose froman extensive line of base instrument components and accessories. See the ATO chart below to make your selections.


A. Combustible Sensor OptionYou can to have your MSA 20L combustible gas sensor reading factory set to be displayed as %LEL or %Volume.Enter a selection for display reading andprobe type.

Combustible Sensor Code% LEL (Methane, 0–100%), 0

Flexbile probe% Volume (0–100%), Flexible probe 1% LEL (Methane, 0–100%), 2

Coiled probe% Volume (0–100%), Coiled probe 3

B. Oxygen Sensor OptionTo choose to have an oxygen sensorinstalled in your new Orion G Multigas andLeak Detector, choose selection 1. For nooxygen sensor, enter a “0.”

Oxygen Sensor CodeNone 0Oxygen (0–25%) 1

C. Carbon Monoxide Sensor OptionTo choose to have a carbon monoxide sen-sor installed in your new Orion G Multigasand Leak Detector, choose selection 1. Forno carbon monoxide sensor, enter a “0.”

Carbon Monoxide Sensor CodeNone 0Carbon monoxide (0–999 ppm) 1

D. Hydrogen Sulfide Sensor OptionTo choose to have a hydrogen sulfide sen-sor installed in your new Orion G Multigasand Leak Detector, choose selection 1. Forno hydrogen sulfide sensor, enter a “0.”

Hydrogen Sulfide Sensor CodeNone 0Hydrogen sulfide (0–200 ppm) 1

E. Battery Pack OptionsYou can choose between MSA’s NiMHrechargeable batteries which will run yourOrion G Multigas and Leak Detector for up to 16 hours, or you can choose theconvenience of alkaline batteries. Alsoavailable in easy-to-change alkalinewith thumbscrew attachment.

Battery Pack CodeStandard NiMH rechargeable A(comes with standard AC charger)Replaceable alkaline BReplaceable alkaline with Cthumbscrew attachment

F. Battery Charger OptionsIf you order your Orion G Multigas andLeak Detector with a rechargeable batterypack, the charger is included in the price.If you want the optional vehicular chargeradapter, choose selection “1.”

Vehicle Charger CodeNone/Standard AC charger 0Vehicular charger 1

G. Sampling Connection MethodsThe Orion G Multigas and Leak Detectoroffers the flexibility of using standardthreaded connections or the new Quick-Connect sampling-line fittings.

Sampling Connection Methods CodeThreaded AQuick-Connect B

H. Sampling LinesMSA’s high-speed sampling lines are ofthe highest quality materials guaranteed tonot alter sample concentration. Threadedfittings with O-Ring couplings at each endensure there are no leaks when the sys-tem is operating. Also available in a Quick-Connect version for easy attaching andtight seal. Sampling connection methodchosen above determines type of fittingsupplied with sampling line.

Sampling Lines CodeNone 03-foot coiled 15-foot coiled 210-foot 315-foot 425-foot 55-foot 6

I. Sampling ProbesMSA’s sampling probes are durable andeasy to use. The built-in Water Stop® fil-ter ensures your sampling system is notcontaminated with dirt and debris if theprobe tip is dipped in water. You mustorder a probe if you order a samplingline as we strongly recommend youoperate the instrument with this filter inplace. Sampling connection method chosen above determines type of fittingsupplied with sampling line.

Carrying Attachments CodeNone 01-foot straight 13-foot straight 2Bar hole probe 38-inch Stix 4Hot gas probe 5

J. Carrying AttachmentsWhile a high-strength, nylon clip isoffered with the instrument at no charge,a swivel belt loop kit, which allows quickrelease from your belt with a half turn, is also available. For easier one-hand operation, choose the pistol grip option.

Belt Clip CodeStandard nylon 0Swivel belt loop 1Pistol grip 2

K. Instrument JacketFor the highest levels of environmentaland rough handling protection, you canorder a jacket or boot for your Orion GMultigas and Leak Detector.

Instrument Jacket CodeNone 0Black rubber boot BYellow cordura jacket CBoth boot and jacket D

L. Calibration KitsYou can choose one of two calibrationoptions for your Orion G Multigas andLeak Detector. The flexible RP kit provides a constant flow regulator that is reused and provides the greatestaccuracy. The squirt gas test kit providesa very economical means to verifyinstrument calibration.

Calibration Accessories CodeNone 0Model RP Calibration Kit 1

(includes gas cylinder)Squirt Gas Check Kit 2

(includes gas cylinder)

M. Data Communications KitIf you need to track the readings and operation of your Orion G Multigas andLeak Detectors, consider ordering themwith the optional built-in datalogging module. This option also provides STELand TWA capabilities.

Data Communications CodeNone 0Orion link module 1Module and download 2

software

N. Packaging Options & Carrying CasesYou can further protect your Orion GMultigas and Leak Detector with optionalcarrying cases. For ease of transport andhandling, these cases can even beordered to accommodate calibrationaccessories. With the premium cases, asimple to understand training videotapeis included at no extra charge.

Packaging & Carrying Cases CodeStd shipping container only 0Black plastic case with video 1

and space for 2 cylindersHeavy-duty case with video 2

and space for 2 cylinders

Orion G Multigas and Leak Detector Assemble-to-Order (ATO) Options


FIRE SERVICE PRODUCTSFiveStar® AlarmThe FiveStar Alarm provides the flexibility to meet your gasdetection needs, yet is incredibly simple to use. The durable,high-impact case makes it long-lasting, while the advancedergonomic design and software reduce worker load and simplify operation. This means less time spent training and more time in service. Over its life, the FiveStar Alarm’s ease of use, safety features, and long-term money savings combineto provide the best in gas detection available today.

The FiveStar Alarm’s simplicity is obvious from the start:• Three well-marked, easy-to-use keys.

• Display faces user.

• Industry leading RFI protection.

• Flexible smart sensors.

• Weatherproof—IP54-rated.

The FiveStar Alarm’s advanced software features mean safer operation:• Limits on sensor zeroing.

• Limits on one-button calibration.

• User acknowledges configuration changes.

• Data recording is standard.

O2 CO NiCd Battery

AC Charger

Calibratio

n Cap

10ft Line

H2SLELLeather J

acket

Carrying Case

1ft Probe

Fast Charger

FiveStar Alarm Kit Options

The FiveStar Alarm saves money:• Unbeatable warranty and service.

• Long-life combustible sensor.

• One-button calibration saves training and gas.

• 5-gas capability means one instrument can do the job of multiple detectors.

• Battery “gas gauge” accurately depicts remaining battery run time.

• 20-hour NiMH battery option means one battery can do the job of two.

Gas sensors available—you can order the FiveStar Alarm with sensors to detect:

• Combustible gas (0–100% LEL or 0–5% methane)

• Oxygen (0–25%)

and up to three of the following gases:

• Ammonia 0–100 ppm

• Carbon monoxide 0–2000 ppm

• Chlorine 0–20 ppm

• Chlorine Dioxide 0–5 ppm

• Hydrogen sulfide 0–500 ppm

Assemble-to-Order (ATO) System: You Make the ChoicesThe ATO System makes it easy to “custom order” the FiveStar Alarm, configured exactly the way you want it. You can choose from an extensive line of base instrument components and accessories. See the ATO chart on the following page to make your selections.


• Nitric oxide 0–100 ppm

• Nitrogen dioxide 0–100 ppm

• Phosphine 0–5 ppm

• Sulfur dioxide 0–100 ppm

FiveStar Alarms can be ordered in one of two convenient ways. Either select from the most popular kit combinations below or refer to MSA’s highly effectivecustom-ordering process, “Assemble-to-Order.”

Deluxe, 4-gas 10018002

Deluxe, 3-gas, CO 10018003

Deluxe, 3-gas, H2S 10018004

Industrial, 4-gas 10018005

Industrial, 3-gas, CO 10018006

Industrial, 3-gas, H2S 10018007

Economy, 4-gas 10018008

Economy, 3-gas, CO 10018009

Economy, 3-gas, H2S 10018030

Pulsecheck Pump

• • • • • • • • • • • •• • • • • • • • • • •• • • • • • • • • • •• • • • • • • • • •• • • • • • • • •• • • • • • • • •• • • • • • •• • • • • •• • • • • •

For more complete information, please refer toBulletin 0816-06-MC.

Calibratio

n Kit

More gas detection capabilities are continually introduced. Call for availability of other gas detectioncapabilities. Some configuration limitations apply.



39

FiveStar Alarm Assemble-to-Order (ATO) Options

A-5ST-


- 1 - --

Please write in numbers from selections above in appropriate boxes andcontact your MSA Fire Service Distributor to place your order.

A A A A B C D E F G H I J K L M N OSelection …

A. Electrochemical Sensor OptionPlease list the code number for the toxicgas sensors desired in the spaces to theright. In order to properly process yourorder, list them in descending order. Usezeros to complete any of the four selec-tions where no sensor is desired (e.g.2100).

Sensors (Select 4) CodeNone 0Oxygen (0-25%) 1Carbon Monoxide (0-2000 ppm) 2Hydrogen Sulfide (0-200 ppm) 3Nitric Oxide (0-100 ppm) 4Nitrogen Dioxide (0-100 ppm) 5Sulfur Dioxide (0-100 ppm) 6Chlorine (0-20 ppm) 7Phosphine (0-5 ppm) 8Ammonia (0-100 ppm) 9Chlorine Dioxide(0-5 ppm) A

B. Combustible Gas Sensor OptionIf a combustible gas sensor is desired, select type of display. There are twooptions available: 0-5% Methane by vol-ume (%CH4) or 0-100% Lower ExplosiveLimit (%LEL Pentane).

Sensors CodeNone 0% CH4 (Methane) M% LEL Pentane L

C. Page OptionsSelect your desired combination of the following pages:

PeakShort Term Exposure Limit (STEL)Time Weighted Average (TWA)Datatagging

Page Options CodeNo option pages active 0Datatagging only 3Peak, STEL &TWA AAll four option pages active B

D. Alternate LanguagesThe FiveStar Alarm speaks your language.Select the alternative languages optionand the instrument will display a screen at battery attach which asks user to select between three languages for screendisplays.

Language CodeEnglish only 0English, Spanish & French 1

E. Battery Pack OptionsThere are multiple, flexible options topower the instrument. The standard NiCdand heavy-duty NiMH rechargeable bat-tery packs have a built-in battery gauge to provide the remaining hours of run time for the instrument. The NiMH battery provides up to 20 hours of continuous operation for long-running jobs. The convenient replaceable pack can operatewith either alkaline or lithium batteries.

Battery Pack CodeNone 0Standard NiCd Rechargeable AReplaceable “AA” BCodes A & B CNiMH DCodes B & D E

F. Battery Charger OptionsFrom wall adapters to vehicular chargers,you can recharge your batteries whereveryou need. Also, the unique Fast Chargeroffers the best technology available insafe, rapid charging of your battery packs.For a small investment, the Fast Chargernot only fully charges in less than fivehours, it also pays for itself by ensuring thelongest possible life from your recharge-able packs.

Battery Pack/Charger CodeNone 08-24VDC (Vehicle) 1110 VAC 2220 VAC 3110 VAC and Vehicle 4Fast Charger (NiCd only) 5Fast Charger (NiMH and NiCd) 6

G. Sampling and Calibration MethodsThe FiveStar Alarm’s sampling systemsprovide the highest degree of protectionavailable. The patented PulseCheck® Pumpconstantly checks the flow system forchanges in operation and will provide analarm to the user if it senses a majorchange. You do need to have at least onepump, aspirator or calibration cap in your“fleet” to calibrate your instruments.

Sampling/Calibration Methods CodeNone 0Aspirator Pump Module ACalibration Cap CPulseCheck Pump P

H. Sampling LinesMSA’s high-speed sampling lines are ofthe highest quality materials guaranteednot to alter sample concentration.Screw fittings with O-Ring couplings ateach end ensure that there are no leakswhen the system is operating.

Sampling Lines CodeNone 05-foot coiled 110-foot 215-foot 325-foot 4

I. Sampling ProbesMSA’s sampling probes are durable and easy to use. The built-in WaterStop® filter in the handle of the probe ensuresyour sampling system is not contaminat-ed with dirt and debris if the probe tip isdipped under water. You must order aprobe if you order a sampling line as westrongly recommend you operate theinstrument with this filter in place.

Sampling Probe CodeNone 08" probe 11-foot straight 23-foot straight 33-foot, holes near tip 43-foot, holes near handle 5Hot-gas sampling probe 6

J. Carrying AttachmentsWhile a high strength, molded plasticbelt clip is offered with the instrument atno charge, there are three other optionsfor handling the instrument. The swivelbelt loop allows quick release from yourbelt with a half turn. The pistol grip kit ishelpful for longer stints of hand heldsampling.

Carrying Attachments CodeMolded plastic belt clip 1Swivel belt loop 2Pistol grip handle 3Stainless steel belt clip 4

K. Instrument JacketTo offer the highest levels of environ-mental and rough handling protection for your FiveStar Alarm, you can ordereither a leather or Cordura Nylon jacket.The cases are custom designed to fiteither the diffusion instrument or theinstrument with pump.

Instrument Jacket CodeNone 0Leather Case 1Cordura Nylon Jacket 2

L. Calibration KitsMSA provides two options for verifyinginstrument calibration. The RP kit, with aconstant flow regulator and replaceablecylinders provides the greatest accura-cy. The Squirt® Gas Check Kit aerosolcanister provides an economical meansto verify instrument calibration. (Onlyavailable in ATO for Combustible, O2, CO,H2S—other gases must be purchasedseparately.)

Calibration Accessories CodeNone 0Model RP Calibration Kit 1Squirt Gas Check Kit 2

M. Data Communications KitThe standard easy-access lamp cap isincluded with your Sirius MultigasDetector at no extra charge. You mayalso choose a tamper-proof lamp cap.

Data Communications CodeNone 0FiveStar Link 1

N. Packaging Options & Carrying CasesThe standard easy-access lamp cap isincluded with your Sirius MultigasDetector at no extra charge. You mayalso choose a tamper-proof lamp cap.

Packaging & Carrying Cases CodeStd shipping container only 0Black plastic case 1Heavy duty case with video 2Large, heavy duty case with 3

video & space for cylinderOrange plastic case 4

O. Instrument Case SelectionThe standard easy-access lamp cap isincluded with your Sirius MultigasDetector at no extra charge. You mayalso choose a tamper-proof lamp cap.

Instrument Cases CodeNickel-plated 0Stainless filled 1

FiveStar Alarm Assemble-to-Order (ATO) Options



The TITAN Combustible Gas Detector, for the detection of flammable gases or vapors, features one-buttonoperation, a compact size and a 24-month service life. Reliable, easy to use and durable, the detector standsup to the roughest handling in the harshest environments. Suitable applications include:

• home calls

• overhaul

• perimeter monitoring

Titan® Combustible Gas Detector

Features & Benefits

Reliability• 85 dB, piercing audible alarm

• More-than-320º angle, highly visible visual alarm

• Optional NiMH battery pack with vibrating alarm

• Triple alarms ensure reliable warning

Ease of Use• Simple, intuitive one-button operation—simply

switch it on.

• Easy-to-read display is one of the largest of any pocket-sized instrument.

• Back-lighting provides exceptional contrast forhigh visibility from a variety of angles in low-light.

• Alkaline batteries provide a minimum of 13 hrs. of continuous operation; NiMH battery pack provides a minimum of 11 hrs.

• Full battery charge (under 4 hrs.) with MSA Fast Charger means less instrument downtime.

• Contoured rubber grips allow unit to fit comfortably and securely in gloved hands.

Durability• IP54 rating for excellent resistance to water and

dust penetration and performance in the harshestconditions and toughest environments.

• Strong construction enables it to survive accidental drops.

• Features the MSA Series 20L Sensor, which provides up to 50x the silicone poison tolerance,and features a considerably expanded sensor life.Sensor is very easy to replace.

Titan Combustible Gas DetectorTITAN with alkaline battery pack 10033144

TITAN with NiMH battery pack 10033387

TITAN with vibrating NiMH battery pack 10033388

Charger 10040783

Features• Easy-to-Read Display

• One-Button Autocalibration

• Distinctive Alarm System

• Clip Options

• Adjustable Alarm Set-Points

• Replaceable Battery

• Replaceable Sensor

• Durability

• Large Rubber Buttons

PULSAR®+ Single-Gas Detector

Gas Type CO

Range ___________0-500 ppm

Resolution _______1 ppm

Response Time ____T90<60 sec

Factory Set Alarm Points

Low Alarm _______35 ppm

High Alarm _______100 ppm

STEL ____________400 ppm

TWA ____________35 ppm

The PULSAR+ Single-Gas Detector is reliable, easy-to-use, anddurable. With sensor options for CO, H2S and O2, this unit will provide industry leadingperformance and stand up to the roughest handling in the toughest environments.

PULSAR+ Fire Service Kit is designed specifically for firefighters who must respondquickly to CO calls. The kit contains a CO PULSAR+ Single-Gas Detector with a protec-tive jacket and neck strap, a Squirt® Gas Bump Test Cylinder, and 10 MiniCO® CarbonMonoxide Detector Tube Cards, all packaged for convenience in a durable, compact carrying case. The Squirt Gas Bump Test Cylinder provides a quick and certain means ofcalibrating the PULSAR+ Single-Gas Detector in the field; the Detector Tube Cards offerhomeowners an easy and affordable means of checking their exposure to CO levels afterthe firefighter has left the home.

Pulsar+ Single-Gas DetectorInstrument Type Part No.

CO 10040334

CO with vibrating alarm 10040335

CO Fire Service Kit 10041735

CO Fire Service Kit, vibrating 10041736



41

Toximeter™ II Automatic Detector Tube Pump

The Toximeter II Automatic Detector Tube Pump makes the sampling process easier, allowing theuser to preset the number of pump strokes from 1 to 250. Intrinsically safe, the automatic pumpworks with all MSA detector tubes. It can also be used as a sampling pump.

Detector Tube Pumps

Kwik-Draw® Detector Tube Pumps

MSA’s Kwik-Draw and Kwik-Draw Deluxe Pumps can be used with an assortment of MSA’s detectortubes to spot-test atmospheres for a wide variety of toxic substances. They are designed for one-hand operation and consistent delivery of a sample draw volume of 100 milliliters (ml).

Detector Tube Handbook

The HazMat Response Detector Tube Kit can be used by firefighters, HazMat Response Teams and other workers to helpclassify unknown chemical gases and vapors at accident or spillsites. A Quad-Port Sampler allows four chemical classes to betested simultaneously. The portable kit contains 12 types ofDetector Tubes (each with sufficient tubes for 10 completetests), a Kwik-Draw Pump to draw the sample through the tubes, the multiple tube holder and a convenient, easy-to-followinterpretation guide.

HazMat Response Kit

Gas-Tester™ II H Detector Tube Pump

The Gas-Tester II H Pump is set for action by compressing the bellows. A pump stroke is started bypressing the release button. When the sample (100ml) is drawn through the tube, the end-of-strokeindicator changes color. An accurate measurement is obtained because the sample draw procedure itself is controlled only by the specifications of the pump and the flow resistance of thedetector tube.

Features & Benefits• Quickly classifies unknown

chemical gases and vapors

• Quad-Port Sampler allows simultaneous testing with fourdetector tubes, meaning less time in IDLH atmosphere

• Flow-limiting orifices ensure evensample flow

• Portable and easy to handle

• Includes simple interpretationguide

HazMat Response KitIncludes 12 types of detector tubes, multiple tube holder,Kwik-Draw Pump and interpretation guide

807472

Extra Quad-Port Sampler 485233

Toximeter™ II Automatic Detector Tube PumpToximeter II Automatic Detector Tube Pump 655585

Kwik-Draw Detector Tube PumpsKwik-Draw Basic Pump, with remote sampling adapter and carrying pouch 488543

Kwik-Draw Deluxe Pump, with remote sampling adapter, carrying pouch and end-of-stroke indicator

487500

Accessories

Sampling line, 10 ft 73067



Remote Sampling Adapter, required for above sampling line 87970

Solvent-Resistant Sampling Line, 25 ft, with reel 488780

Tube Holder, required for 488780 line above 488872

Flue Gas Kit 470321

For more completeinformation on allDetector TubePumps, see DataSheet 08-01-02.

Gas-Tester II H Detector Tube PumpGas Tester II H Detector Tube Pump 696944

Detector Tube HandbookDetector Tube Handbook 813929


FIRE SERVICE PRODUCTSDetect a wide range of nerve, blister, blood, and choking agents.

• Quick, simple to use, easy to interpret results

• “Go/No Go” style

• Can be used with MSA’s full line of pumps

• All sold in boxes of 10 tubes

• Important: Sold only in the U.S.

Chemical Warfare Agent Detector Tubes

Chemical Warfare Kits are available in a Single CWA Tube Sampler and a Multi CWA TubeSampler. The Single CWA Tube Sampler will only sample one CWA tube at a time. TheMulti CWA Tube Sampler allows the user to simultaneously sample up to four CWA tubesat the same time without making adjustments. The kit is supplied with an MSA Escort ELFpump, which maintains constant flow with a built-in “Run/Hold” feature that allows theuser to start/stop the pump and still maintain an accurate sampling timer. The four-portmanifold tube holder is pre-set for the proper flow rate for CWA tube sampling.

Multi CWA Tube Sampler

Single CWA Tube Sampler

Chemical Warfare Agent Detector Tube Kits

Chemical Warfare Agent Detector TubesNerve (Sarin, VX, GA, GD, etc.) 10007654

Blister (Mustard Gas) 10007653

Blister (Lewisite) 10007650

Blister (variety, including Mustard Gas) 10007652

Blood and Choking (CG, DP, AC, CK) 10007651

Chemical Warfare Agent Detector Tube Kits

Multi CWA Tube Sampler with Escort ELF Pump 10049765

Single CWA Tube Sampler with Kwik-Draw Pump 10044998



43

HAZMATCAD™ and HAZMATCAD Plus Hazardous Material Chemical Agent DetectorsHAZMATCAD Detector

The HAZMATCAD Hazardous Material Chemical Agent Detector is ahandheld instrument that detects and classifies Chemical WarfareAgents (CWA). When compared to other technologies, the HAZMATCADDetector offers more capabilities and greater reliability at a lower cost.

Features• Compact, light-weight and portable

• Self-diagnostic check during rapid warm-up

• Alphanumeric display with LED alarms

• Dual-Mode SAW Operation—Fast or High Sensitivity

• Operates between 8 and 12 hours on rechargeable Li-Ion batteries

• Vapor-diffusion check source verifies system performance

• Unit can be hand-carried or worn on belt

• RS-232 and IrDA communication ports; stores up to 8 hours of data

• Inlet design protects against dust and particulates

HAZMATCAD Plus Detector

The HAZMATCAD Plus Detector detects for Chemical Warfare Agents(CWA) and selected Toxic Industrial Chemicals (TICs). It is a portableinstrument designed for one-hand operation. It is very easy to operateand requires limited training for effective use.

Features• Self-diagnostic check during rapid warm-up

• Alphanumeric display with LED alarms

• Dual-Mode SAW Operation – Fast or High Sensitivity

• Electrochemical Cells – Real time analysis

• Operates between 8 and 12 hours on rechargeable Li-Ion batteries

• Vapor-diffusion check source verifies system performance

• RS-232 and IrDA communication ports; stores up to 8 hours of data

• Inlet design protects against dust and particulates

SafeSite® MULTI-THREAT Detection SystemThe MSA SafeSite Hazardous Gas Detection System monitors, detectsand communicates the presence of up to six potential threats, includingchemical warfare agents (CWA), gamma radiation, volatile organic compounds (VOC), toxic industrial chemicals (TIC), combustible gasesand oxygen deficiency—all within a wireless network.

The SafeSite System combines state-of-the-art detection technologywith advanced wireless communications capabilities to provide superiorpreventative and counter-measure solutions for:

• homeland security • public events

• building protection • perimeter monitoring

• mass transportation centers • port surveillance

• hazardous response

• confined space

• emergency responseCall MSA Customer Service at 1-888-MSA-FIRE for a quotation.

HAZMATCAD Detector KitsKits include: HAZMATCAD Detector; battery charger; belt clip; two Sonyrechargeable batteries; hard, water-resistant carrying case; operating manual;vapor check source

Instrument Chemical Agents Detected Part No.

HAZMATCAD Detector Nerve and Blister 10055094

HAZMATCAD Detector Nerve, Blister and Hydrogen Cyanide 10055095

HAZMATCAD Detector Nerve, Blister and Phosgene 10055096

HAZMATCAD Plus Detector Nerve and Blister agents and TICs (phosgene, hydrogen cyanide, halogenand hydride gas)

10055097

Threat Technology Benefit

Chemical warfare agents Surface acoustic wave (SAW) Low false positives and false alarms, speciation of nerve & blister agents

Gamma radiation Cadmium zinc telluride (CZT) Sensitive with adjustable threshold and 2 ranges. (0–100 mR/hr, 0.1mR/hr resolution and 0–1000 mR/hr,1mR/hr resolution)

Volatile organic compounds Photo-ionization (PID) 10.6eV lamp provides ppm readings for broad band toxics and VOC detection

Toxic industrial chemicals Electro-chemical Detects for many specific toxic gases such as chlorine, ammonia, hydrogen cyanide & hydrogen chloride

Oxygen deficiency Electro-chemical Oxygen deficiency monitoring for confined space

Combustible gas Catalytic Wide range detection for hydrocarbons


FIRE SERVICE PRODUCTSCalibration

Galaxy™ Automated Test System

Extremely Easy to Use• Standard web browser accessibility

for data retrieval and reporting

• Industry-standard memory cardavailable for simple data retention

• System does not require a computeror network interface

• Works without the touch of a single button

• Minimal training needed

Versatile and Expandable• Up to 10 systems can be intercon-

nected

• Instrument charging option available

• Optional battery pack available for remote use

Durable, Innovative Design• Wireless- or wired-network

interface available

• Inventive system door also functionsas dust cover

• Guaranteed to work in the harshestenvironments

• In-line gas cylinder holster available; keeps the work area clean and orderly

Value-Driven Performance• All-inclusive, 2-year warranty

• High quality, cost-effective solution

• Very low total cost of ownership

Galaxy System KitsSolaris Galaxy Kits Sirius Galaxy Kits Orion Galaxy Kits

Basic Standalone Kit

Basic System 10061051 10061050 10061824

Standard Standalone Kit (Includes Regulator)

Standard System 10061783 10061810 10061825

Standard System + Charging 10061784 10061811 10061826

Standard System + Cylinder Holder 10061785 10061812 10061827

Standard System + Charging, Cylinder Holder 10061786 10061813 10061828

Smart Standalone Kit (Includes Regulator, Memory Card)

Smart System 10061787 10061814 10061829

Smart System + Charging 10061788 10061815 10061830

Smart System + Cylinder Holder 10061789 10061816 10061841

Smart System + Charging, Cylinder Holder 10061790 10061817 10061842

Portable Kits** (Includes Regulator, Battery Pack)

Portable System 10061802 10061818 10061843

Portable System + Memory Card, Cylinder Holder 10061801 10061819 10061844

Network Kits (Includes Regulator, Wired Ethernet Access)

Wired Network System 10061803 10061820 10061845

Wired Network System + Charging, Cylinder Holder 10061804 10061821 10061847

Network Kits (Includes Regulator, Wireless 802.11b Access)

Wireless Network System 10061805 10061822 10061848

Wireless Network System + Charging, Cylinder Holder 10061806 10061823 10061849

For Assemble-to-Order information,see the Galaxy ATO Chart on p. 45.

AccessoriesDemand Flow Regulator 710288

North American Power Supply 10047342

Global Power Supply 10047343



45


The ATO System makes it easy to “custom order” the Galaxy Automated Test System, configured exactly the way you want it. You can choosefrom an extensive line of base components and accessories. See the ATO chart below to make your selections.

A-GALAXY- - - - - - - -

Please write in numbers from selections above in appropriate boxesand contact your Fire Service distributor to place your order.

Selection … A B C D E F G H

0 0

Galaxy Automated Test System Assemble-to-Order (ATO) OptionsA. Test Stand Instrument TypeEach Galaxy test stand has a dedicated instrument type. Up to 10 specific systems can be mixed andmatched; however, different instruments types will not work in the same test stand. The Solaris® and OrionInstruments must have datalogging installed to operate with the Galaxy test stand.

Test Stand Options CodeSolaris ASirius BOrion C

B. Calibration CylindersThe Solaris and Orion Galaxy test stand, by default will operate with 1 calibration gas cylinder. TheSiriusGalaxy test stand, by default, will operate with 2 calibration gas cylinders. If your system configurationrequires 3 cylinders for calibration, select option "1".

Calibration Cylinder Options CodeNo 0Yes 1

C. RegulatorAt least 1 demand flow regulator is required for either the Solaris or Orion Galaxy Test Stands. At least 2demand flow regulators are required for the Sirius Galaxy Test Stand. The number of regulators you needequals the number of gas cylinders required for an instruments calibration.

Regulator Options Code1 Regulator 12 Regulators 23 Regulators 3None 0

D. Cylinder HolderThe number of cylinder holders should match the number of gas cylinders required for an instruments cali-bration. Included in this option is the ability to order either 1, 2, or 3 cylinder holders.

Cylinder Holder Options Code1 Cylinder Holder 12 Cylinder Holders 23 Cylinder Holders 3None 0

E. Instrument ChargingIf you'd like to have your new Galaxy system installed with the ability to charge your instrument, select "1"for this option. (Requires instrument with rechargeable batteries).

Charging Options CodeNo 0Yes 1

F. Power SupplyA power supply is required to power each Galaxy test stand. The global power supply comes with severalinternational plug outlet configurations for countries outside of North America, for this option select “G”.Select the battery pack option “B” for locations (includes North American supply) where AC power may notbe easily accessible. If you choose the instrument charging option, the battery pack option is not available..

Power Supply Options CodeNorth American Supply NGlobal Supply GBattery Pack BBattery Pack & Global Supp;y X

G. Memory CardIf you'd like to have a removable memory card installed in your new Galaxy System, select option "1". Amemory card reading device is required to read the memory card, this must be entered as a different lineitem on your order. Only 1 memory card is needed per Galaxy System.

Memory Card Options CodeNo 0Yes 1

H. Network Interface ModuleFor wired (ethernet) connectivity to your internal network, select option "A". For wireless (802.11b) connec-tivity to your internal network, select option "B". The location where the Galaxy will be installed must haveeither of these capabilities for this option to operate properly. Only 1 network interface module is needed perGalaxy system.

Network Interface Module Options CodeNone 0Wired Web Interface AWireless Web Interface B




sensors currently installed in the instrument. The TIM System is so advanced that if aninstrument is not in proper working condition, it

will let you know what is wrong. Beyond simplycalibrating a given instrument, here is what theTIM System’s “smarts” will do for you:

• Automatically generate test protocol based oninstrument sensor configuration.

• Adjust run time for instrument and pump type toensure shortest test time.

• Check instrument software and sensorcompatibility.

• Notify user if gas for instrument is not assignedto TCC.

• Synchronize date and time of instrument withpersonal computer.

• Print computer-generated test receipt.

TIM® System – The Total Instrument Manager

Calibrate Four Instruments Simultaneously

The TIM System is designed to calibrate up tofour instruments at the same time— with only one

computer and four TIM Control Centers. Whetherone, two, three, or four instruments are beingcalibrated, the TIM System ensures that each

instrument is fully calibrated and ready to go!

Immediate Calibration Results

The user can set up the system for a bump test or afull calibration. After an instrument has been bump-tested or calibrated, the TIM System immediatelydisplays and prints the results of the bump test orcalibration. The display on the TCC (TIM ControlCenter) unit not only shows whether an instrumentpassed or failed the bump test or calibration, butalso displays the results for each sensor.

Password Availability

The TIM System allows password identification, if desired. The password identification maintainsidentification of individual users, maintains identifi-cation of instrument serial numbers, and recordsthe user date, time and type of gas check (bumptest or full calibration) performed. Passwords aremaintained and assigned by the system manager.

Stores All Calibration Records

The TIM System electronically stores all bumptest and calibration records. With a click of the

mouse, a drop-down screen displays all recordedcalibrations of any particular instrument by date,time, and results of each instrument calibration.

• Sample Instrument Records

• Instrument and pump type

• Model number (sensors installed)

• Owner and owner information

• Instrument location

• User comments

• Test results

• Instrument assignment

Computer Requirements

To ensure that the TIM System can be easily enhanced for years to come, it is designed tooperate on a standard Windows-compatiblepersonal computer. Minimum requirements are a Pentium processor, 16 MB RAM, a 30 MB harddrive, and a CD-ROM drive. The software iscompatible with all Windows Operating Systems

(all data can be downloaded to a network). Acomputer is required to operate the system at

each local site, but a single computer can run upto four TIM Control Centers. (TCC)

Report Capability

The TIM System’s data software includes a user-friendly archive—with both view and print capability—of all calibrations of all instrumentsthat were bump-tested or calibrated on the TIMSystem. This easy-to-use and easy-to-read reportmenu is designed with the user in mind. Whetheryou need a quick reference to any particular

instrument and its calibration results, or a complete detailed master report of all instruments,categorized and printed in hard-copy form, theTIM System offers you this capability at your fingertips.

Ergonomic Design; Loaded with Features

Designed for use where space is limited, the completely portable TCC measures only 11" x 9" x6" and weighs less than 7 pounds. The housing is.090" aluminum, painted with rugged wear-resistant epoxy paint. The unit features a slopedface panel, four non-skid mounting feet, and aneasy-to-read lighted display which facilitatesoperation in low light areas. In addition, a mem-brane-activated, alpha/numeric, panel-mountedkeyboard provides easy touch-button data entry.

Setup is a snap! In less than 15 minutes, your TIMSystem is completely operational. All necessaryconnectors and power cords are supplied. Anddon’t worry… we have designed the software sothat it’s easy to install.

Auto-Recognition Capability

This unique feature can be found only in the TIM System. Our unique auto-recognition featureeliminates the need for changing setups betweentests. The TIM System will automatically recog-nize the MSA instrument that is to be calibrated: a Passport, Gasport, Watchman, FiveStar Alarm,Solaris or Orion instrument. The TIM System automatically identifies the instrument serial number and model type, as well as the gas

TIM System Kits

TIM System Components

TIM System Kit Part No.

1001

0742

1001

0151

1001

0152

1001

0153

1001

0154

1001

0155

1001

0156

1001

0157

1001

0158

1001

0150

1003

0771

1004

6769

1004

6768

1004

6767

TIM Control Center (P/N 710338) • • • • • • • • • • •Software CD-ROM (P/N 710460) • • • • • • • • • • •Fresh Air Inlet Filter (P/N 633697) • • • • • • • • • • •Instruction Manual (P/N 710548) • • • • • • • • • • •6-foot Length of Tubing (P/N 603806) • • • • • • • • • • •Warranty Card (P/N 10006796) • • • • • • • • • • •PC Computer, Pentium (P/N 10006402) •Data Docking Module (P/N 804679) • •Module Bracket, Watchman (P/N 10006711) • •Gas Miser Model RP Regulator (P/N 710288) • • • • • •Gas Miser Model BD Regulator (P/N 710289) • • • •Holster Assembly, Integral Pump (P/N 710658) • •Holster Assembly, Add-On Pump Module (P/N 711391) • •Holster Assembly, FiveStar (P/N 10010164) • •Holster Assembly, Orion (P/N 10028009) •Deluxe Docking Stand,Orion/Orion G (P/N 10042686) •Deluxe Docking Stand, Orion only (P/N 10043139) •Deluxe Docking Stand, Orion G only (P/N 10043138) •

TIM System Kits

Depending on your need, you can choose from any one of 11 already-assembled TIM System kitsdesigned to calibrate your specific instrument.



47

A - TIM - -

1 2 3 4

Assemble-To-Order for the TIM System

AccessoriesThe TIM System requires one of the holster assemblies or thedata docking module described below to communicate with theinstrument. Other accessories are optional.

Holster assembly for use with Orion. Includes JetEyecommunication module and gas feed connection.

10028009

Holster Assembly for use with FiveStar Alarm.Includes JetEye infrared communication module andgas feed connection.

10010164

Holster Assembly for use with Orion and Orion G.Includes JetEye infrared communication module andgas feed connection

10028009

Holster Assembly for use with Solaris. IncludesJetEye infrared communication module and pumpedgas delivery

10049419

Docking Stand, deluxe, heavy-duty, for use with Orionand Orion G. Includes JetEye infrared communicationmodule and gas feed connection.

10042686

Docking Stand, deluxe, heavy-duty, for use with Oriononly. Includes JetEye infrared communication moduleand gas feed connection.

10043139

Docking Stand, deluxe, heavy-duty, for use with Orion G only. Includes JetEye infrared communication module and gas feed connection.

100443138

A/B Switchbox (6" x 6" x 2-1/2")Connect two holster assembly or data docking modules for use with one TCC-TIM Control Center.Shipped complete with inter-connecting cable and dual feed flow system. Switch allows usage with either connected holster/module assembly. Only oneinstrument can be calibrated at a time.

10010168

TCC Printer (6" x 6" x 9")Shipped complete with 5 rolls of printer paper andrequired cables. Connects directly to the TCC and willautomatically print a 3" x 5" receipt of instrument test.Ideal for confined space entry permits.

10010167

If one of MSA’s 11 pre-packaged TIM System kits does not exactly meet your requirements,you can custom order a complete system that will meet your needs. To configure your TIMSystem, select instrument options and mark them in the appropriate boxes below. Then con-tact your MSA Fire Service Distributor to place your order. As with all MSA Assemble-To-Order requests, your order will usually be shipped the same day it is received.

1—Basic TIM System

All TIM Systems come complete with this basic configuration (“A-TIM”). The only othercomponents needed are a PC and a holster assembly or data docking module, which canbe ordered as an accessory. The Basic TIM System includes:Description Part No. Description Part No.

TIM Control Center (TCC) 710338 Instruction Manual 710548

Software CD ROM 710460 Gas Miser Regulator, Model RP 710288

Fresh Air Inlet Filter 633697 6-foot Calibration Tubing 603806

2—Data Docking Module

Select only option. Enter number of selection in position 2.0 = None

1 = Add-on pump holster assembly (P/N 711391) 6 = Data Docking Stand Orion (P/N 10028009)

2 = FiveStar holster assembly (P/N 10010164) 7 = Data Docking Stand Orion (P/N 10043139)

3 = Data docking module (P/N 804679) 8 = Data Docking Stand Orion G (P/N 10043138)

4 = Integral pump holster assembly (P/N 710658) 9 = Data Docking Stand Orion (P/N 10049419)

5 = Orion holster assembly (P/N 10028009)

3—Gas Regulator Type

This option allows your system to be ordered with multiple regulators. Enter letter of selection in position 3.0 = None

A= Gas Miser, Model BD (P/N 710289)

B= Gas Miser, Model RP (P/N 710288)

C = Natural Gas Regulator (P/N 710545)

D= Gas Miser BD and Gas Miser RP

E = Gas Miser RP and Natural Gas Regulator

F = Gas Miser BD and Natural Gas Regulator

G= All: Gas Miser BD, Gas Miser RP, and Natural Gas Regulator

4—Personal ComputerThis option allows users to order a personal computer with the TIM System software installedand the icon initialized. Enter number of selection in position 4.

0 = None 1 = Pentium computer (software installed)

The computer supplied will be configured with the following minimum requirements. However,because of rapid advancements in computer technology, MSA reserves the right to ship a com-puter of a larger size and faster processor speed.

Minimum requirements:

Available for Chlorine and Ammonia use!Limited to FiveStar Instruments.Contact Customer Service for detailed information.

• IBM compatible 333 MMXprocessor

• 64 GB hard drive• 32 MB RAM

• 32x CD-ROM drive• Windows 98• 17" monitor• 3V" 1.44MB floppy drive

• mouse• keyboard



Each MSA Calibration Gas Cylinder is shippedwith an individual copy of a material safety datasheet (MSDS) and an individual copy of a certifi-cate of analysis.

MSA certifies that the gas mixture in calibrationgas cylinders was prepared gravimetrically, usingNIST traceable weights. The lot number and nominal value of the gas constituents in percent

by volume, percent by mass, PPM, or volume arespecified on the cylinder. The uncertainty state-ment of the specified nominal value is also listed.

Calibration Gas

Model RP Calibration Check Kits

Model RP Check Kits consist of a regulator which includes a gauge to measure container pressure, an adapter hose, sensor adapter (where applicable), instructions, and a case with room for two Model RP cylinders ofcalibration check gas.

Gas Miser® Demand Regulator: The Intelligent Regulator

The Gas Miser Regulator is the most advanced, yet sim-ple-to-use calibration gas delivery system available. Madeof nickel-plated brass and polished aluminum (especiallyimportant for reactive gases), the Gas Miser Regulatorcan supply gas flow from 0.1 lpm to 3.0 lpm, but that’s onlythe beginning. Designed for use with any MSA Model RPCalibration Cylinder except chlorine and ammonia*, the GasMiser Regulator features an automatic ON/OFF valve thatreleases gas only on demand. Only the amount of gasneeded to calibrate your MSA instrument is deliveredaccurately. When the calibration is complete, theGas Miser Regulator shuts off automatically. And, for userconvenience, the regulator can stay connected to thecylinder where it remains in a ready state—making itideal for such fixed installations as work benches andcalibration stations.

The Gas Miser Regulator also eliminates the need to changeregulators to accommodate different instruments or flow rates. It’s not only intelligent, it’s cost-efficient. Supplied withcalibration tubing and special fitting.

* A Gas Miser Regulator for chlorine and ammonia is available for Model RP cylinders —P/N 10034391

Regulators

Model RP

Gas Miser®

Model RP

Gas Miser®

Model BD-20

* Can be used with chlorine and ammonia; replaces P/N 809945.

Natural Gas Demand Regulator

This low-pressure Demand Regulator is designed tobe used with MSA Instrument Calibration Systemsto automatically supply 100% natural gas to the cal-ibrator as required. No adjustments are necessaryor provided. Like the Gas Miser Regulator, the Natural Gas Regulator featuresan automatic ON/OFF valve that releases gas only on demand. Comes com-plete with barb-type outlet fitting and easily connects to natural gas supplywith W" NPT thread. Recommended for use with pressure of 0.3 to 5.0 psig.

Gas Miser® Manifold

The Gas Miser Manifold is not only a cylinderholder but it also incorporates a 4-station “bumptest” or calibration manifold. It works with ModelRP and Econo-Cal cylinders and Gas Miser regu-lator on any pumped or aspirated instrument. Themanifold will supply the correct amount of gasrequired and will bump test or calibrate up to four instruments simultaneously. Gas Miser regulator sold separately.

Model RP Combination Regulators

Two regulators in one. Trigger activation allows abump test or calibration check in the “SQUEEZE”mode or fixed-flow calibration in the up or“LOCKED” position. Designed for use with allModel RP and Econo-Cal calibration cylinders.Supplied with calibration tubing and special fitting.

.25/1.5 LPM Flow ControlModel RP Cylinder .25 lpm* 467895

Model RP Cylinder 1.5 lpm 467896

Natural Gas Demand RegulatorNatural Gas Demand Regulator 710545

Model RP Combination RegulatorModel RP Combination Regulator, .25 lpm 711175

Model RP Combination Regulator, 1.5 lpm 711174

Gas Miser RegulatorsModel RP 710288

Model RP, Chlorine and Ammonia 10034391

Model BD-20, with CGA 590 fitting 710289

Model RP Calibration Check KitsCheck Kit, Model RP, with 1.5 lpm regulator (less gas cylinders) 711175

Check Kit, Model RP, with 0.25 lpm regulator (less gas cylinders) 711174

Gas Miser Manifold4-Station Manifold 710274

Model RP



49

Model RP Cylinder

Contents: Pressure 1000psig; approximately 100liters at atmospheric pressure

Size: 13-3⁄4" x 3"

Weight: 2 lb 13 oz

Material: Steel

Model RP Cylinder

Contents: Pressure 500psig; approximately 58liters at atmosphericpressure

Size: 13-3/4" x 3"

Weight: 1 lb 11 oz

Material: Aluminum

Econo-Cal Cylinder

Contents: Pressure 500psig; approximately 34liters at atmosphericpressure

Size: 13-3/4" x 3"

Weight: 1 lb 1 oz

Material: Aluminum

Model RP Econo-Cal

Model RP

Note: Reactive gases have an expiration date listed on each cylinder. This is to ensure the highest quality and accuracy for instrument calibration.Most cylinders have an expiration date of 12 months. Check with MSA Customer Service for the exact shelf life of a particular calibration cylinder.

Model RP and Model R Calibration Cylinders—Non-Reactive Gases, Steel Cylinder, 100 Liters100 liters, 1000 psi 19 liters, 300 psi 34 liters, 500 psi

Gas Fill Gas Mixture Background Model RP Model R Econo-Cal

Air air zero (THC < 1 ppm) — 801050 — —

CarbonMonoxide

400 ppm carbon monoxide air 806255 — —

300 ppm carbon monoxide air 473180 461769 —




100 ppm carbon monoxide nitrogen 806734 — —

Hydrogen 0.8% hydrogen air 803102 — —

Isobutylene 100 ppm isobutylene air 494450 — 10048279

Methane 2.5% methane air 491041 459942 —

6.6% methane nitrogen 801049 — —

Oxygen 20.8% oxygen nitrogen 479857 468248 —

5.0% oxygen nitrogen 493580 476302 —

Nitrogen 100% nitrogen — 481317 — —

Nitrous Oxide 10 ppm nitrous oxide nitrogen 806736 — —

Pentane 0.75% pentane (50% LEL) air 804532 — —

Propane 0.6% propane air 493579 — —

Combination 0.35% pentane, 19.0% oxygen, 100 ppm carbon monoxide nitrogen 10007047 — —

0.6% propane, 15% oxygen, 60 ppm carbon monoxide nitrogen 801051 — —

1.45% methane, 300 ppm carbon monoxide, 15% oxygen nitrogen 10010162 — —



1.45% methane, 15% oxygen nitrogen 478192 — —

1.45% methane, 15% oxygen, 60 ppm carbon monoxide nitrogen 478191 — —

Model RP and Model Econo-Cal Calibration Cylinders—Reactive Gases, Aluminum Cylinder, 58 & 34 Liters58 liters, 500 psi

Gas Fill Gas Mixture Background Model RP Econo-Cal

Ammonia 25 ppm ammonia nitrogen 814866 711078

Chlorine 10 ppm chlorine nitrogen 806740 711066

Hydrogen Sulfide 40 ppm hydrogen sulfide nitrogen 467897 711062

15 ppm hydrogen sulfide nitrogen 806253 711064

10 ppm hydrogen sulfide nitrogen 467898 711060

Nitric Oxide 50 ppm nitric oxide air 812144 711074

Nitrogen Dioxide 10 ppm nitrogen dioxide air 808977 711068

Phosphine 0.5 ppm phosphine nitrogen 710533 711088

Hydrogen Chloride 40 ppm hydrogen chloride nitrogen 710210 711080

Hydrogen Cyanide 10 ppm hydrogen cyanide nitrogen 809351 711072

Sulfur Dioxide 10 ppm sulfur dioxide air 808978 711070

Combination GasCylinders

1.45% methane, 15% oxygen, 300 ppm carbon monoxide, 10 ppm hydrogen sulfide

nitrogen 804770 711058


nitrogen 10048788 10048790


nitrogen 10045035 10048280

1.45% methane, 15% oxygen, 10 ppm hydrogen sulfide nitrogen 804769 711056


nitrogen 813720 711076


nitrogen 10048890 10048981

2.5% methane, 15% oxygen, 20 ppm hydrogen sulfide nitrogen 10048889 10048888

0.35% pentane, 19% oxygen, 100 ppm carbon monoxide, 35 ppm hydrogen sulfide

nitrogen 10007049 —



Cylinder-Holders

Single Portable Cylinder-Holder

The Single Portable Cylinder-Holder isdesigned for use with all MSA Model Rand Model RP cylinders. It fits neatly on aworkbench or shelf, and its unique designensures that the calibration cylinder (withthe regulator attached) always stayswhere you put it.

Double Cylinder-Holder, Wall-Mounted

The Wall-Mounted Double Cylinder-Holder holds allMSA Model R and Model RP cylinders. A moldedbase and holding straps keep the cylinders securelyin position, yet both cylinders and/or regulators canbe easily changed. The holder is ideal for field station calibrations and can be easily mounted for work-bench applications.

Model BD-20 Calibration CylindersGas Fill Gas Mixture Background Part No.

Methane 2.5% Methane, 15% Oxygen, 60 ppm Carbon Monoxide Nitrogen 710566

1.45% Methane, 15% Oxygen, 60 ppm Carbon Monoxide Nitrogen 710565

Air, zero Air, zero, THC<1 ppm — 710776

Contents: Pressure 2200 psig; approximately 552 liters (20 cu ft) of gas at atmospheric pressure

Size: 25" x 4W" Weight: 10 lb 9 oz Material: Steel

Model BD-20 Calibration Cylinders

Calibration Cylinders Are Recyclable!

MSA has affiliated with the Association of Retarded Citizens, Butler County—a nonprofit organization that employs mentallyretarded citizens—and established a Cylinder Recycling Center. The calibration cylinders are not refilled, but salvaged for scrap. All money generated from selling the scrap cylinders is placed in the ARC operating fund for salaries and operating costs.

Calibration cylinders are considered hazardous unless the cylindersare empty. MSA has developed special devalving tools that willensure the cylinder is empty and render the cylinder non-fillable. For your convenience, MSA also offers a specially pre-addressedshipping box (also recyclable) which helps you pay the lowest shipping costs available.

The MSA Recycling Center limits the return of calibration cylinders to MSA-logoed cylinders only. Non-MSAcylinders will be rejected. Contact MSACustomer Service for additional detailsat 1-877-MSA-FIRE.

Squirt® Gas Bump Tester

Contents: Pressure 155psig; approximately 11liters at 70°F

* Reactive gases have an expiration date listed on each cylinder. This is to ensure the highest quality and accuracy for instrument calibration. Mostcylinders have an expiration date of 12 months. Check with MSA Customer Service for the exact shelf life of a particular calibration cylinder** Requires calibration adapter.

Model RP Calibration Cylinder—Steel, 100% Methane

Model RP Cylinder—Steel, 100% Methane

Gas Fill Gas Mixture Part No.

Methane 100% Methane 711014

Contents: Pressure 1000 psig; approximately 58liters of pure methane with odorant added to smelllike natural gas in all commercial gas lines

Size: 8-1/2" x 3" Weight: 1 lb 13 ozMaterial: Steel

Devalving Tool, Model “RP” & Econo-Cal Cylinders 711228

Devalving Tool, Model “R” cylinders 711229

Shipping Box, Special, Pre-addressed 711227

Cylinders for Squirt GasCombustible

InstrumentSquirt GasCylinder Methane

PentaneSimulant Oxygen

CarbonMonoxide

HydrogenSulfide Isobutylene Balance

Explosimeter 815307 2.5% See cylinder — — — — Air

Gasport 814350 2.5% — 15% O2 60 ppm CO — — Nitrogen

Gasport 814349 2.5% — 15% O2 300 ppm CO 35 ppm H2S — Nitrogen

Passport, FiveStar, Solaris 814497 1.3% 50% LEL 15% O2 60 ppm CO — — Nitrogen

Passport, FiveStar, Orion 814559 1.3% 50% LEL 15% O2 300 ppm CO 35 ppm H2S — Nitrogen

MiniCO** Responder, Pulsar+ 814978 — — — 60 ppm CO — — Air

MiniH2S*Responder 814979 — — — — 35 ppm H2S — Nitrogen

MicroGard** 815308 1.3% 50% LEL 15% O2 — — — Nitrogen

Passport PID II 815704 — — — — — 100 ppm Air

Squirt Gas Bump Test KitKit, less cylinder, but with required fittings and adapters, complete with instructions 813411

Single Portable Cylinder HolderSingle Cylinder-Holder, 6" wide x 13" long x 4" high 710386

Double Portable Cylinder HolderDouble Cylinder-Holder, 17" high, 10" wide, 3-1/2" deep at base 710483



51

Fall Arrest, Rescue and Confined Space Equipment

Gravity™ Rigger/Rescue Harness

The harness incorporates a sit harness designwhich allows the user a much higher degree ofcomfort while in the sitting position. TheGravity Rigger/Rescue Harness is suitable forrappelling/control descent, positioning, ladderclimbing, rescue, and fall arrest. Meets ANSI Z 359.1 and applicable OSHA standards, andis CSA certified.

Additional sizes available.

Bosun Chair

Designed to be used in conjunction with ourFull Body Harnesses, the Bosun Chair isthe best method to sit suspended for longdurations. The Bosun Chair attached to thechest D-ring will keep the user in theupright position.

Sure-Grab™ Positioning Lanyard

Anchorage Connectors

Thermatek™ Anchorage Connnector Strap• Kevlar webbing

and stitching

• Contrasting colors of webbing and stitching allows for easier inspection

• Heat- and burn-resistant

Boom Belt

• Attaches to boom arm

• Adjustable

• Allows for quick & easy inspection

Carabiners

Sure-Strong™ Tripods• Adjustable aluminum legs

• Two forged steel anchor eyesin head assembly

• Head assembly prevents unintentional collapse of tripod

• Legs adjust and lock individu-ally to accommodate variableanchor heights, uneven groundand compact storage

• Leg security strap prevents legs from spreading in the event of excessive loading

• Available with cordura nylon storage bag

• Rated for 2 people with a working load of 1,100 lbs

Sure-Strong™ TripodsSure-Strong 7-ft (2m) Tripod, aluminum, 10,752 lb (48kN) SCE107007

Storage Bag for 7-ft Tripod, cordura nylon SCE107007BG

Sure-Strong 10-ft (2m) Tripod, aluminum, 10,752 lb (48kN) SCE107010HD

Storage Bag for 10-ft Tripod, cordura nylon SCE107010BGHD

Tripod center-mounted Bracket, aluminum SCE107060

Sure-Strong Work Winch, 50 ft (15m), galvanized wire rope, w/bracket SCE1074021050

Sure-Strong Work Winch, 200 ft (61m), galvanized wire rope, w/bracket SCE1074411200

aluminum extruded head assembly(2) forged steel anchors

powder-coatedpaint finish

leg security

strap withadjustable

frictionbuckle

self-lockinghead assembly

lockinglegs adjustin 5" 14cm)increments

collapsedstorage size10" x 61"(25cm x152cm)

non-slip rubber pads on feet

Sure-StrongWork Winch

Bosun ChairBosun Chair, 5" x 16-1/2" padded aluminum seat,black nylon straps, 2 carabiners

SSH3505017

Gravity™ Rigger/Rescue HarnessGravity Riggers Harness, black polyester webbing, cross-over design, integral belt

SSH60930001

MSA Rescue Carabiners• Certified to meet

NFPA 199301995, Class “G”

• The SRCC642 auto-locking model meets ANSIZ359.1-1992

• Weight: approx. 11 oz

• Strength: 12,364 lb

Fireman Hook Carabiner• Unique side swing gate

offers a greater gate opening compared to similar sized carabiners

• Meets ANSI Z 359.1-1992

• Includes stainless steel captive bar (not installed)

• Weight: approximately 13.7 oz

• Strength: 6,750 lbSRCC642

SRCC307

SRCC641

CarabinersCarabiner, 1.2" (32mm) gate, carbon steel, zinc-plated SRCC641

Carabiner, 1.2" (32mm) gate, carbon steel, zinc-plated, auto-locking SRCC642

Carabiner, 2" (50mm) gate, carbon steel, zinc-plated, auto-locking SRCC307

Sure-Grab™ Positioning LanyardSure-Grab positioning lanyard, manual, closed body, c/w 5/8" x 6' yellowStatic Kernmantle, chrome locking swivel snaphook, left-handed version

SNYL5370H306

Sure-Grab positioning lanyard, manual, closed body, c/w 5/8" x 6' blue Static Kernmantle chrome locking swivel snaphook, right-handed version

SNYR5370H306

Anchorage ConnectorsThermatek anchorage connctor strap 10023487

Boom belt, 1-1/4" nylon webbing, adjustable, one size fits all

SSB22040


FIRE SERVICE PRODUCTSAnthron Descender

The Anthron Descent Controller is a manuallyoperated controlled descent device. It is most commonly used for suspended work positioning, self-evacuation, or rescue operations. The device utilizes a cam assembly that provides friction on the rope to hold a load, or allow the load todescend at a controlled rate. To begin descent, theuser depresses the control lever on the Anthron. Ifthe control lever is fully depressed in a panic situation, thedescent will stop. Other features include:

• Proper roping/rigging diagrams on side of Descender

• Device can be installed/removed at any point on the rope

• Working load of 300 lbs (136 kg)

Anthron DescenderAnthron Systems

Includes Anthron Descender, 2 Carabiners, 7/16" (11mm) Rope

with 50' rope with 100' rope with 150' rope

SDC726050 SDC726100 SDC726150

Replacement Parts

Anthron descender SDSD-25

Rope/equipment bag, holds 300' (90m) rope SRB431101

Rope/equipment bag, #3 Cordura, orange, holds 300' (90m) rope

SRB430305

Replacement Rope — 7/16" (11mm) Static Kernmantle synthetic

50' length 100' length 150' length

SDC716050 SDC716100 SDC716150

SuretyMan™ Rescue Eight

• Designed for fire service, rescue, and police tactical operations

• Designed for rope diameters from H/bg" (11 mm) to F/i" (16 mm)

• Available in aluminum or steel

• Weight: 1.5 lb (675 g) • Strength: 6,720 lb (30 kN)

Suretyman™ RQ3 Q-Eight

• Ears/cleat are positioned to make tie off very easy and safe

• Ears/cleat still prevent larks footing (girth hitch)

• Designed for 7/16" (11 mm) diameter rope—will work with 1/2" (12 mm)diameter rope

• Aluminum, anodized gold

• Weight: 8 oz (.24 kg)

• Strength: 13,000 lbs (58 kN)

Locking offthe Figure 8descender

Locking offthe Q-8

Pulleys and Rigging Plates

Suretyman™ RQ3 Pulley

Designed to meet the rigorous standards of the professionalrescuer. Pulley features high grade aluminum side plates andsheaves, oilite bearings, stainless steel bolts, washers and locknuts. Aluminum side plates swivel and rotate to allow pulley tobe attached anywhere along rope. Top holes of side plates arelarge enough to accept three carabiners. Prusik hitch providesrope security. Accepts 3/8” (1cm) to 1/2” (1.3cm) static kern-mantle ropes. Side plates are powder coated. Strength: 8, 100 lb (36kN).

Suretyman™ Mini Knot Passing Pulley• Ample room for the passing of knots

• Aluminum sheave (that will not score like some plastic sheaves)

• Locking pin

• Half the size and weight of some of the larger, bulkier knot passing pulleys

• Size: 9-1/2" (24cm) tall, 4" (10cm) wide, 3" (7.6cm) deep

Suretyman™ Stealth Rigging Plate

The RQ3 Stealth Rigging Plate’s unique design is byan RQ3 Master Instructor. Anchor on the point andthe wings will rotate toward the load for a straighter line of pull. Material:aluminum. Weight: .46 lb (250g). Strength: 11,000 lbs (48kN).

Rescue Cradles

The Rescue Cradle is available in two modeltypes. The SRH30701 model is designed toallow easy placement on a person. Equippedwith 4" (10 cm) polyester webbing and 4–3"(7.6 cm) D-rings. One size fits all.

The Rescue Cradle model SRH30703 is similarto the SRH30701 model, except it is construct-ed with 1-3/4" (4.4 cm) nylon webbing, 2" (5 cm) attachment ring, and an elasticshoulder strap.

Left: ModelSRH30701

Pulleys and Rigging PlatesSuretyman RQ3 Pulley, 2” (5cm) double, Std/Prusik, orange, aluminum, weight: .83 lb (375g)

SPPPU8708

Suretyman Mini Knot Passing Pulley, yellow, weight: 1.9 lb (.89kg) SPPPU8720

Suretyman/RQ3 Stealth Rigging Plate, aluminum, teal SRSPR 5990

SuretyMan™ Rescue EightSuretyman Rescue Eight, steel SRSF5045

Suretyman Rescue Eight, aluminum SRSF5077

SuretyMan™ RQ3 Q-EightSuretyman RQ3 Q-Eight SRSF FE2120

SuretyMan™ Rescue EightRescue Cradle, 4" (10 cm) polyester webbing and 4–3" (7.6 cm) D-rings

SRH30701

Rescue Cradle, 1-3/4" (4.4 cm) nylon webbing, 2" (5 cm) attachment ring, and an elastic shoulder strap

SRH30703

Customer Service Center: 1-877-MSA-FIRE • Website: www.MSAFire.com • QuickLit Fax Information: 1-800-672-9010 53

Firefighter’s Escape Kit

The Firefighters Escape Kit was created as atool for emergency egress for a fire fightertrapped in an upper floor of a building. This kitis lightweight and easy to use. Firefighter’sEscape Kit includes:

• 2 Suretyman aluminum auto-locking carabiners (P/N - SRCA853)

• 60 ft (18.3 m) 9mm rope (P/N - SRP500900)

• Mini Q-Eight

• Small stuff sack

Mini Q-Eight

Carabiners

9 mm Rope

Stuff Sack

Fall Protection Rescue Kit

The Fall Protection Rescue Kit is designed to be an “out of the bag” rescue system. This kit combines a remote hook and extension pole with a rescue utility system. The remote hook and extension pole allows for remoteattachment of a rescue line to a victim. The Rescue Utility System allows a rescuer to raise or lower the victim to safety. This kit should be used with a back-up system (not included).

Fall Protection Rescue Kit includes:

• Adjustable Pole, 6 ft (1.8m) to 12 ft (3.6m) (P/N SFP675009)

• Pole Adapter (P/N SCE109001) converts poleto hold remote hook

• Remote Hook (P/N SRCA401) for remoteattachment

• Storage Bag (P/N SRB675009) for pole andremote hook

• Rescue Utility System (P/N SRS15200)—raising and lowering system witha 4:1 mechanical advantage

Note: Due to a 4:1 mechanical advantage, the user should order the Rescue Utility System with 4 times the length of rope necessary for their application. For example, the 200' system providesa 50' working length. A 600' system provides a 150' working length.

Static Kernmantle Ropes

These ropes are 100% permanent solution dyed color with contrastingmarker stripe. Superior flexibility andknotability, provided by a unique double-twist cable core construction, gives superior resistance to abrasionthat is up to four times greater than other static kernmantle ropes.These ropes are designed with load absorbing capabilities to provideadditional safety in the event a dynamic force is applied.

Prusik & Accessory Cords

Prusik cords have the same high quality and long wear design as rescue ropes. Size selection should be based upon diameter of themain line. The flexible cord is both strong and highly resistant toabrasion. Prusik cords and accessory cords are identical.

Rope Identification System

7/16" & 1/2" Static Kernmantle Ropes listed above will meet NFPAstandards with the addition of the Rope Identification System. Thissystem consists of a special label that carries all necessary NFPAinformation and a serial number. The serial number is attached to therope by a shrink wrap. The shrink-wrapped serial number providestraceability if the label is ever lost, so a new label can be issued. TheRope Identification System must be ordered with the rope. Pleasespecify these part numbers with your rope order if you require a ropethat meets the NFPA standard.

Rope Bag

Static Kernmntle Ropes7/16" (11mm), nylon, 6,500 lb (2,948kg), black SRP508760

1/2" (12mm), nylon, 9,100 lb (4,128kg), orange/yellow tracer SRP504860SL

1/2" (12mm), polyester, 9,100 lb (4,128kg), red SRP530961

7/16" (11mm), nylon, 6,000 lb (2,722kg), olive SRP544000

1/2" (12mm), nylon, 9,000 lb (4,083kg), blue/white tracer SRP504866SL

1/2" (12mm), nylon, 9,000 lb (4,083kg), red/white tracer SRP504863SL

Ropes and Accessories

Prusik & Accessory Cords8mm Accessory Cord, nylon. Use with 1/2”-5/8”(1.3cm-1.6cm) main line, black, 3,100 lb (1,406kg)

SRP500860

9mm Accessory Cord, nylon. Use with 1/2”-5/8”(1.3cm-1.6cm) main line, 3,600 lb (1,632kg)

SRP500900

Rope Identification System7/16" (11mm) NFPA Life Safety Rope Tag, with serial number, shrink tub

SRS598016

1/2" (12mm) NFPA Life Safety Rope Tag, with serial number, shrink tube

SRS598012

Only 1 required per rope.

Rope BagRope Bag #2, orange, holds 200 ft/ 1/2" (60.1m/12mm) rope SRB430201

Rope BagFirefighter’s Escape Kit 10030026

Rope BagFall Protection Rescue Kit 10030025



FIRE SERVICE PRODUCTSBasic High Angle Rescue Kits

The Basic High Angle Rescue Kits were designed for the Fire Department planning toassemble a high angle rescue team. A complete high angle rescue system consists of twokits: a Belay System Kit, and a Raising/Lowering System Kit.

The Belay system kit includes:• 3 large “D” shaped rescue carabiners (P/N SRCC641) - NFPA approved Class G

• 200 ft (61m) 1/2" rope, orange and white (P/N SRP504860SL) - NFPA approved

• 33 ft (10m) 9mm accessory cord (P/N SRP500900) for making load-release hitch

• 65" (1.65m) 8mm accessory cord & 53" (1.35m) accessory cord (P/N SRP500860) make-up the tandem Prusiks

• 6 ft (1.8m) Suretyman anchorage sling (P/N SFP2267406)

• #3 rope bag, orange (P/N SRB430301)

The Raising/Lowering System includes:• 6 large “D” shaped rescue carabiners (P/N SRCA641) - NFPA approved Class G

• Stealth rigging plate (P/N SRSPR5990)

• 200 ft (61m) 1/2" rope, red (P/N SRP504863SL) - NFPA approved

• 33 ft (10m) 9mm accessory cord (P/N SRP500900) for making load-release hitch

• 65" (1.65m) 8mm accessory cord & 53" (1.35m) accessory cord (P/N SRP500860) make-up the tandem Prusiks

• 53" (1.35m) 8mm accessory cord(P/N SRP500860) for creating the Prusik for connecting the raising system

• 2 Single Pulleys, 4" (100mm) (P/N SPPPU8710) —Prusik minding pulleys

• Brake Bar Rack (P/N SRS14001) - lowering device is NFPA approved

• 6ft (1.8m) Suretyman anchorage sling (P/N SFP2267406)

• #3 rope bag, black (P/N SRB430305)

Belay System Kit

Anchorage Sling

Storage Bag

9 mmAccessoryCord

65” 8 mm Accessory Cord

Carabiners

1/2” Rope

53” 8 mm Accessory Cord

Raising/Lowering System Kit

Pulleys

Storage Bag

9 mm Accessory Cord

8 mm Accessory Cords

1/2" RopeBrake Bar Rack

Stealth Rigging Plate

Anchorage Sling

Carabiners

Suretyman™ Rescue Utility System

The Suretyman Rescue Utility System incorporates all the features professionals havecome to expect from a first class rescue system. The system is primarily used for raisingand lowering people or equipment in rescue and industrial work access and is ideal forconfined space applications.

The Suretyman Rescue Utility System features:

• Pulleys equipped with a built-in anti-reversing lock

• Only a 10 lb force is all that is required to hold a 220 lb (90kg) load

• Suretyman ascender attached to both the operating rope and the user via a securingrope—if the operating rope accidently releases, the ascender automatically stops the descent

• Rapid deployment

• Virtually maintenance free

• Rated for 2-person load

• Compact and light weight with a standard system weight of 17 lb (7.7kg)

• Versatile for rescue & access

• Multi-purpose ascent or descent

• Rated capacity of 600 lbs (272kg) for personnel and materials

• Standard rope length of 200 ft (66m) with a maximum rope length of600 ft (200m)

Please Note: Due to a 4:1 mechanical advantage, the user should order the Rescue Utility System with 4 timesthe length of rope necessary for their application. For example, the 200' system listed above provides a 50'working length. A 600' system provides a 150' working length.

carabinerupper

anti-reversingdouble pulley

lower anti-reversingdouble pulleycarabiner

securing rope withcarabiner

storage bag

left-handed ascender(optional)

Suretyman 7/16"(11mm) statickenmantle tope

right-handed asccender(standard)

Basic High Angle Rescue KitsBelay System Kit 10030023

Raising/Lowering System Kit 10030024

Basic High Angle Rescue KitsSuretyman Rescue Utility System (200' length) SRS15200



55

Course Offerings• Fundamentals of Safety-at-Heights

• Competent Person for EquipmentInspection

• Safety-at-Heights Program Management &Rescue Planning

• Tower Climbing Safety & Rescue

• Competent Person for Safety-at-Heights

• Competent Person Refresher

• Industrial High Angle Rescue

• Fall Protection & Rescue in ConfinedSpaces

• Fall Protection for Wood Pole Climbing

• Fall Protection & Rescue for RailwayBridges

• Competent Person Train-the-Trainer

• Custom courses for a wide range of industries, including the mining industry,utilities industry, automotive industry,telecommunications industry, and railroad industry.

Course Locations• Courses are offered in our training

facilities located in Denver, Colorado and Edmonton, Alberta.

• Hands-on training available on-site at your facility.

• Custom courses can be conducted to fityour specific applications and needs.

Registration Information• Call us at 1-888-672-2222 or fax us at

1-800-976-0398.

Confined Space Equipment

The Lynx™ Boom Mount Hoist is designed for lifting, lowering, and positioning of personneland materials.

The Lynx Rescuer—a self-retracting lanyardwith emergency retrieval capabilities—facilitates non-entry retrieval. It is the easiest,quickest field-reset table mechanism on the market.

Confined Space EquipmentLynx 8' Tripod 10022050

Lynx 10' Tripod 10022051

Lynx Boom Mount Hoist with 50' Galvanized Wire Rope, Emergency Drive, & Air Drive Adapter (also available with Stainless Steel Wire Rope)

10016683

Lynx Boom Mount Hoist with 105' Galvanized Wire Rope, Emergency Drive, & Air Drive Adapter (also available with Stainless Steel Wire Rope)

10016682

Lynx Rescuer Self-Retracting Lanyard 10011744

Bracket for mounting Self-Retracting Lanyard to Tripod 506622

Pulley 506222

Confined Space/Head First Extraction System

The ConfinedSpace/Head FirstExtraction System(HFES) is a special-ized rescue productdesigned for those extremecases where the rescuer has noother option, but to be loweredhead first into a confined spaceto perform a rescue. Thesecases are rare, but can happenwhen someone has fallen into a restrictive confined space such as a well or drain system. The system allows the rescuer to belowered comfortably into a confined space head first, harness the victim, and raise both victim and rescuer out of the confined space. This small, compact system canbe used with any confinedspace retrieval equipmentsuch as tripods and davits.

The HFES consists of:

• Adjustable Lifting Strap

• Adjustable Victim Strap

• 1 Pair of Ankle Harnesses

• 2 Carabiners

• Storage Bag

Top: pair of ankle harnessesMiddle: 2 carabinersBottom: storage bag (lifting strap and victimstrap not pictured)

Safety-at-Heights Training

The most active, hands-on, solutions-based training available.

Lynx Rescuer,Field ResettableModel withLockoutLynx Boom Mount Hoist

Rope BagConfined space/head first extraction system

SRS3100

Note: This Bulletin contains only a generaldescription of the products shown. Whileuses and performance capabilities aredescribed, under no circumstances shallthe products be used by untrained orunqualified individuals and not until the product instructions including any warnings or cautions provided have been thoroughly readand understood. Only theycontain the complete and detailed information concerning proper use and care of these products.

ID 5555-83-MC / March 2006© MSA 2006 Printed in U.S.A.

Corporate HeadquartersP.O. Box 426, Pittsburgh, PA 15230 USAPhone 412-967-3000www.MSAFire.com

Fire Service Customer ServicePhone 1-877-MSA-FIREFax 1-800-967-0398

MSA CanadaPhone 1-800-MSA-2222Fax 905-238-4151

MSA Mexico Phone 52-55 21 22 5770Fax 52-55 359 4330

MSA International Phone 412-967-3354 Fax 412-967-3451

Offices and representatives worldwideFor further information:

SCBA and Accessoriespp. 3–16

Gas Masks, PAPRs and Air-Line Respiratorspp. 17–21

Thermal Imaging Cameraspp. 22–25

Fire Helmetspp. 26–27

Eye and Hearing Protectionpp. 28–29

Gas Detectorspp. 30–50

Fall Arrest, Rescue and Confined Space Equipmentpp. 51–54

5555-83-FireCatalog-06

Documents

Transcript of 5555-83-FireCatalog-06