Guangzhou GaoKe Communications Technology

GaoKe Communication developed and launched MG6000 Series to meet Telecom carrier, service provider and home users NGN requirement, which including IP Phone, IAD (Integrated Access Device), Trunking GW, GW, GK (gatekeeper), Billing system, NAT Proxy and NMS, to provide perfect VoIP/FoIP solution. Such series widely support all kinds of protocol and services, performances high-efficiency, safe, high-quality voice service. MG6000 Series IAD_ 1/2/4/8/16/24 port IAD provide flexible, convenient, abundant voice and wideband data service. MG6008W is 8 ports FXS IAD, which with Five 10/100 Base-T port to connect WAN/LAN and WiFi, 8 ports to connect normal phone, also provide 8 lines VOIP service.

MG6008W WiFi HW

Features One RS232 port for configuration Eight standard RJ11 ports, FXS for analog phones One bypass port Five 10/100M BASE-T connect WAN/LAN Supports VLAN TAG Supports static/dynamic NAT translate Supports Modem NAT Supports Jitter Buffer to clear network jitter Supports static IP address configure Supports PPPoE (Point to Point Protocol over

Ethernet)/DHCP (Dynamic Host Configuration Protocol) Server, performance IP address dynamic distribute, enhance management convenience and access flexibility

PPPoE/DHCP auto redial when off line Supports on line software upgrade Self-learn MAC address Capacity to define one virtual MAC virtual per

each VLAN associated to every PPPoE session Supports multi configure, as Console, Web, Telnet Management Users level authority, high security Force reset factory setting, good surviva Supports quite tone detect/ CNG (Comfort Noise

Generation) Supports T.30/ T.38 fax, fax translate Support T.38 compliant Group 3 Fax Relay up

to 14.4kpbs and auto-switch to G.711 for Fax Pass-through

Support the Modem call function Billing mode: Polarity Telecom grade lighten proof Recover loss package feature Auto-sensing dynamic buffer technology, Max

150ms, to meet bad network environmentapplication

Adopt authority verify etc. network security mode Supports Caller detect and Caller ID Option DTMF band internal/external transmission

technology Option input/output gain control Supports polarity controlneed operator support

such service

Supports call wait, call transfer, call forward, abbreviation dial, no-disturb (need operator support such service)

Supports 54/48/36/24/18/12/9/6/11/5.5/3/2/1Mbps wireless LAN data transfer rates

Supports 64/128-bits WEP, complies with 128 bit WPA standard (TKIP/AES)

Protocol Control Protocol: MGCP/SIP, supports on line

upgrade and modify between two protocols Voice Codecs: G.711 (A-law and u-law), G.723.1,

G.729, supports voice compress arithmetic dynamic switch

Analog voice interface: DTMF detect Echo cancellation: G.165/G.168 Ethernet port: IEEE 802.3 10BASE-T Ethernet;

IEEE 802.3u 100BASE-TX Fast Ethernet WiFi: IEEE 802.11gIEEE 802.11bIEEE 802.11a Network Protocol: TCP/IP, UDP, ARP, ICMP,

TELNET, SNMP, HTTP, RTP/RTCP, TFTP, NAT,DHCP, PPPoE

Network Management: SNMP, Telnet, Web-based GUI (HTTP), Console

Security Feature: Password-Protected Administration on Telnet, Console, Web (HTTP) and SNMP Supports VLAN, avoid network storm

Powerful QoS Based on IPv4 ToS and distinguish service, set

different service level according to different package to ensure voice packages high priority

Based on IEEE802.1p 4-level priority, Tag high priority on voice package to ensure voice quality

Environmental Dimensions : 252mm179mm41mm Unit Weight: 0.6Kg Working Voltage: Input mark value +12VDC permit range +7VDC+40VDC Working Current: -+12VDC 1A Consumption: 18W Operating Temp : 0~50 Operating Humidity: 10%~90%