Print - CCNA Exploration 2 Chapter 1 Exam Answers _ CCNA Exam Answers - CCNA Exam - CCNA Exams
53822190 Cisco Exploration CCNA 4 0 CCNA 1 Final Exam Answers 2011
Transcript of 53822190 Cisco Exploration CCNA 4 0 CCNA 1 Final Exam Answers 2011
-
Search
CCNA 1 Final Exam Answers 2011Post by Admin at 8:37 AM
copy from http://news361.org 1 . Due to a security violation, the router passwords must be changed. What information can be learned from the followingconfiguration entries? (Choose two.) Router(config)# line vty 0 3 Router(config-line)# password c13c0 Router(config-line)# login The entries specify three Telnet lines for remote access. The entries specify four Telnet lines for remote access. The entries set the console and Telnet password to "c13c0". Telnet access will be denied because the Telnet configuration is incomplete. Access will be permitted for Telnet using "c13c0" as the password.
2 . Which two actions could be taken by a router if a specific match is not made to a route in the routing table? (Choose two.) The packet will be discarded. The packet will be sent back to the source. The packet will be flooded out all interfaces. Neighboring routers are polled to find the best path. The packet will be forwarded to a default route if one is present.
3 .
Refer to the exhibit. The network administrator remotely accesses the CLI of RouterB from PC1 using a secure connection. Whichstatement is true about this connection? The Telnet server process is running on PC1. Only the exchange of the Telnet username and password is encrypted. The GET request is sent to RouterA to retrieve data. The SSH service is used to connect PC1 to RouterB.
4 .
Refer to the exhibit. What three statements are true about the IP configuration that is shown? (Choose three.) The prefix of the subnet mask is /26. The network on which this computer resides can have 30 hosts. The computer is unable to communicate outside of the local network. The address that is assigned to the computer represents private addressing. The IP address that is assigned to the computer is routable on the Internet. The IP address that is assigned as the default gateway is valid for this host.
5 . What information can be gathered by using the command netstat? the default gateway the routing protocol
You are here: Home CCNA1 Final Exam CCNA 1 Final Exam Answers 2011
Home CCNA1 CCNA2 CCNA3 CCNA4
Secure Modem Top selling Secure Modem for emergency out-of-band access. www.apitech.com/ion
Viconics Electronics Inc. Precision HVAC controls for small building application and OEM's www.viconics.com
Official Cisco Courses CCNA, CCDA, CCNP, CCSP, CCVP, CCIP, CCDP, CCIE www.koenig-solutions.com
Ads by Google CCNA Cisco CCNA CCNA Courses Cisco CCNA 1 CCNA1 V4 0
4/17/2011 Cisco Exploration CCNA 4.0: CCNA 1 Fina
blogspot.com//ccna-1-final-exam-ans 1/11
-
active TCP connections the locally configured subnet mask
6 .
Refer to the exhibit. The nslookup command that is shown was issued on a Windows PC host. What does the 10.32.5.74 addressrepresent? the IP address of the host the default gateway for the host the primary DNS server for the host the home page address for the host
7 .
Refer to the exhibit. A network administrator remotely accesses the CLI of RouterB from PC1 using Telnet. Which statement is trueabout this connection? The data is automatically encrypted. A Telnet server process is running on PC1. The connection is made through a VTY session on the router. A GET request was sent to RouterB to retrieve data during this session.
8 . Which three addresses are private IP addresses? (Choose three.) 10.0.0.1 46.1.1.88 172.31.31.10 172.32.16.10 192.168.8.8
9 .
Refer to the exhibit. Host C is able to ping 127.0.0.1 successfully, but is unable to communicate with hosts A and B in theorganization. What is the likely cause of the problem? Hosts A and B are not on the same subnet as host C. The IP addresses on the router serial interfaces are wrong. The subnet mask on host C is improperly configured. The FastEthernet interface fa0/0 of router 1 is wrongly configured.
10 . Which OSI layer addressing is required to route packets between two networks? Layer 1 Layer 2 Layer 3 Layer 4
11 . What is the effect of us ing the Router# copy running-config startup-config command on a router? The contents of ROM will change. The contents of RAM will change. The contents of NVRAM will change. The contents of flash will change.
12 . A PC can not connect to any remote websites, ping its default gateway, or ping a printer that is functioning properly on the localnetwork segment. Which action will verify that the TCP/IP stack is functioning correctly on this PC? Use the ipconfig /all command at the hosts command prompt. Use the ping 127.0.0.1 command at the command prompt. Use the traceroute command at the command prompt to identify any failures on the path to the gateway. Use FTP to check for connectivity to remote sites. Download a troubleshooting tool from the PC manufacturers website.
13 . Which subnet mask will allow 2040 hosts per subnet on the IP network 10.0.0.0? 255.255.0.0 255.255.254.0 255.255.252.0 255.255.248.0 255.255.240.0 255.255.255.128
14 .
Refer to the exhibit. When computer A sends a frame to computer D, what computers receive the frame? only computer D
4/17/2011 Cisco Exploration CCNA 4.0: CCNA 1 Fina
blogspot.com//ccna-1-final-exam-ans 2/11
-
only computer A and computer D only computer B, computer C, and computer D all computers
15 .
Refer to the exhibit. While configuring a network, a technician wired each end of a Category 5e cable as shown. Which twostatements are true about this setup? (Choose two.) The cable is suitable for connecting a switch to a router Ethernet port. The cable is suitable for connecting dissimilar types of devices. The cable is unusable and must be rewired. The cable is terminated in a way that the transmit pin is wired to the receive pin. The cable simulates a point-to-point WAN link.
16 .
Refer to the exhibit. Which layered network model is shown in the diagram? Cisco IETF OSI TCP/IP
17 . An administrator makes changes to the default configuration of a router and saves them to NVRAM. After testing, it isdiscovered that the configurations did not have the desired effect and must be removed. What steps must be taken to remove thechanges and return the router to the default configuration? Reboot the router. Use no version of the commands that are issued. Issue the erase startup-config command, and then reboot the router. Issue the erase running-config command, and then reboot the router.
18 .
Refer to the exhibit. Host A and B are unable to communicate with each other. What is the reason for this? Host A is assigned a network address. Host B is assigned a multicast address. Host A and host B belong to different networks. The gateway addresses are network addresses.
19 .
Refer to the exhibit. A network technician has made several changes to R1 s ince the configuration has last been saved. Themodified configuration did not produce the desired changes. The technician wants to store a backup copy of the savedconfiguration on a TFTP server before reloading. Which action will cause the unmodified data to be saved on the TFTP server?
20 . What can the user do from the command prompt, Router(config-line)# ? Configure one of the network interfaces. Configure one of the physical or virtual lines. Verify the running configuration on the device. Configure the parameters for one of the routing protocols.
21 .
Refer to the exhibit. A PC is connected to a network. Which action will verify that the PC can communicate with its default gateway? Use the ping 127.0.0.1 command. Use the ipconfig command. Use the ipconfig/all command. Use the ping 10.0.0.254 command.
22 .
Refer to the exhibit. The serial interface of the router was configured with the use of the commands that are shown. The routercannot ping the router that is directly connected to interface serial 0/0/0. What should the network technician do to solve thisproblem? Configure the description at interface serial 0/0/0. Configure an IP address on interface serial 0/0/0. Remove the no shutdown command at interface serial 0/0/0 Reboot the router.
4/17/2011 Cisco Exploration CCNA 4.0: CCNA 1 Fina
blogspot.com//ccna-1-final-exam-ans 3/11
-
23 . A technician is asked to secure the privileged EXEC mode of a switch by requiring a password. Which type of password wouldrequire this login and be considered the most secure? console enable enable secret VTY
24 . What are two purposes for configuring a banner on a router? (Choose two.) to announce system downtime to prevent unauthorized access to the router to provide a description of interface connections to assist in legal prosecution for unauthorized access to provide a welcome message to users who access the router
25 .
Refer to the exhibit. A PC is communicating with another PC on a remote network. The two networks are connected by threerouters. Which action will help to identify the path between the hosts? Use the ipconfig command at the host. Use the ipconfig/all command at the destination. Use the tracert command at the host. Use the ping command at the destination.
26 .
Refer to the exhibit. Which list refers only to end devices? D,E,F,G A,H,B,C A,D,E,F A,D,E,G
27 . When must a router serial interface be configured with the clock rate command? when the interface is functioning as a DTE device when the interface timers have been cleared when the connected DTE device is shut down when the interface is functioning as a DCE device
28 . Which table accurately associates the RFC 1918 private IP addresses with the correct network mask?
29 .
Refer to the exhibit. Which two layers of the OSI model describe the same functions as the transport and internet layers of theTCP/IP model? (Choose two.) application layer presentation layer session layer transport layer network layer data link layer physical layer
30 . What happens when a host station receives a frame that contains its own MAC address in the destination field? The Layer 2 information is removed and the frame is pushed up to Layer 3. The host station will copy the information to its buffers and send it back out. The frame originated from the host and will be ignored. The Layer 3 information is added to the frame.
31 .
Refer to the exhibit. Host A is configured with the correct IP address for the default gateway of the router R1 FastEthernet0/1interface. How will a packet that is sent from host A to host B be handled by the devices on the network? R1 will drop the packet because R1 does not have a specific route in its routing table to the 10.1.1.0/24 network. R1 will forward the packet to its default gateway, the next hop router R2. R2 will forward the packet to the directly connectednetwork 10.1.1.0/24. R1 will forward the packet to its default gateway, the next hop router R2. R2 will drop the packet because it does not have a defaultroute to network 10.1.1.0/24. R1 will forward the packet to its default gateway, the next hop router R2. R2 will drop the packet because it does not have a routethat is learned by a routing protocol to network 10.1.1.0/24.
4/17/2011 Cisco Exploration CCNA 4.0: CCNA 1 Fina
blogspot.com//ccna-1-final-exam-ans 4/11
-
32 . What type of network is maintained if a server takes no dedicated role in the network? mainframe client/server peer-to-peer centralized
33 . In a network design project, a network designer needs to select a device to provide collision free connections to 40 hosts onthe LAN. Which device should be selected? hub router switch firewall
34 . Which TCP/IP model layer creates additional overhead on network resources due to acknowledgments, tracking, andretransmission of data? internet transport application network access
35 . How many host addresses may be assigned when using the 128.107.0.0 network address with a subnet mask of255.255.248.0? 30 256 2046 2048 4094 4096
36 . Which service is used when the nslookup command is issued on a computer? FTP DNS DHCP Telnet
37 . Which process provides the means to send and receive data when running multiple applications at the same time on acomputer? interleaving sequencing segmentation acknowledgement
38 . Which three IPv4 addresses represent valid host addresses for a subnet? (Choose three.) 10.1.12.79/28 10.1.12.113/28 10.1.12.32/28 10.1.11.5/27 10.1.11.97/27 10.1.11.128/27
39 . What is the consequence of issuing the erase startup-config command in privileged EXEC mode on a Cisco router? Data stored in RAM will be removed. Data stored in NVRAM will be erased. Information in flash memory will be removed. Flags in the configuration register will be set to 0. Both the startup-config and the running-config will be erased.
40 .
Refer to the exhibit. A network technician is trying to determine the correct IP address configuration for Host A. What is a validconfiguration for Host A? IP address: 192.168.100.19; Subnet Mask: 255.255.255.248; Default Gateway: 192.16.1.2 IP address: 192.168.100.20; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.17 IP address: 192.168.100.21; Subnet Mask: 255.255.255.248; Default Gateway: 192.168.100.18 IP address: 192.168.100.22; Subnet Mask: 255.255.255.240; Default Gateway: 10.1.1.5 IP address: 192.168.100.30; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.1.1 IP address: 192.168.100.31; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.18
4/17/2011 Cisco Exploration CCNA 4.0: CCNA 1 Fina
blogspot.com//ccna-1-final-exam-ans 5/11
-
41 . What is the Cisco IOS? system software for Cisco devices Read Only Memory in Cisco devices non-volatile storage for device configurations an initial operating system that is used for boot functions
42 . Which router configuration mode will require user authentication if an administrator issues the enable secret command? user executive mode privileged executive mode global configuration mode service specific configuration mode
43 . Which command or commands will require authentication to access the privileged exec mode? RTRA(config)# enable secret cisco RTRA(config)# service password encryption RTRA(config)# line con 0 RTRA(config-line)# login RTRA(config-line)# password cisco RTRA(config)# line vty 0 4 RTRA(config-line)# login RTRA(config-line)# password cisco
44 . A routing issue has occurred in your internetwork. Which of the following type of devices should be examined to isolate thiserror? access point host hub router switch
45 . Which statement is true about Layer 3 addresses? They are physical addresses. They are used in routing decisions. They are only used on local networks. They are altered each time a packet crosses a router.
46 .
Refer to the exhibit. An administrator on PC1 wants to view some HTML code from a web page housed on the web server. Whichclient application will allow this request to be started?
47 . Which OSI layer does IP rely on to determine whether packets have been lost and to request retransmission? application presentation session transport
48 .
Refer to the exhibit. PC1 is unable to access PC2. To troubleshoot this problem, the technician needs to confirm that the next hopinterface is operational. Which default gateway address should the technician ping from PC1 to confirm this? 10.0.0.254 192.168.0.249 192.168.0.250 10.0.1.254
49 . An administrator is in the middle of entering a lengthy command when suddenly output from the IOS appears stating that aninterface has gone down and then up again. Consequently, the command that the administrator was typing is no longer legible onthe terminal. What CLI keystrokes can be entered to return to the line that the administrator was typing? Ctrl-D Ctrl-K Ctrl-R Ctrl-Z
50 . Which option represents a point-to-point logical topology diagram?
4/17/2011 Cisco Exploration CCNA 4.0: CCNA 1 Fina
blogspot.com//ccna-1-final-exam-ans 6/11
-
51 . Which physical component is used to access and perform the initial configuration on a new unconfigured router?
52 . Which option shows how a router will route packets to a remote network?
Lable CCNA1, CCNA1 Final Exam
Anonymous said...
from what date is this?
Admin on March 21, 2011 7:09 PM said...
oh hi! I have posted new ccna1 final exam. You can click here to view its. http://testccna-4u.blogspot.com/2011/03/ccna-1-final-exam-2011-latest-hot-hot.html Thanks for comment!
2 Comment:
Post a Comment
Link moreCreate a Link
Enter your email address:
SubscribeDelivered by FeedBurner
Labels
10 Things You ShouldKnow About the CiscoCCNA SecurityCertification
790 questions andanswers CCNA v4
About and Share LAB
BCRAN Knowledgenet
Secure ModemTop selling SecureModem for emergencyout-of-band access.www.apitech.com/ion
Official CiscoTrainingCCNA, CCDA, CCNP,CCSP, CCVP, CCIP,
4/17/2011 Cisco Exploration CCNA 4.0: CCNA 1 Fina
blogspot.com//ccna-1-final-exam-ans 7/11
-
Blog Archive
2011 (8)
March (4)
February (4)
Labs
Biostats Practice Quiz Final Exam Answer Key Spring 2008 SI
BitDefender Total Security2010 ProactiveProtection Against Viruses
BSCI Knowledgenet Labs
BSMSN KnowledgenetLabs
CCIE LAP
CCNA
CCNA - HotspotQuestions
CCNA 1 Final Exam
CCNA 2 - Final Exam
CCNA 3 - Final Exam
CCNA 3 final test
CCNA 4 - Final Exam
CCNA 640-802 VLAN /VTP Practice Questions
CCNA 640-802 WANPractice Questions
CCNA Drag and DropQuestions
CCNA Exploration 1 -Module 2 Exam AnswersVers ion 4.0 100%
CCNA final
ccna final exam
CCNA full courseincluding simulatorsdumps etc
CCNA ImplementationSIM
Ccna Ip Addressing
CCNA JOBS
CCNA JOBS IN CANADA
CCNA JOBS IN USA
CCNA lab
CCNA PracticeCertification Exam # 1 -CCNA Exploration:Accessing the WAN(Version 4.0)
CCNA PracticeCertification Exam 2
CCNA Practice Exam
CCNA Practice Tests 3.1.0
CCNA Semester 1
CCNA Semester 2
CCNA Semester 3
CCNA Semester 4
CCNA TroubleshootingQuestions 1
CCNA TroubleshootingQuestions 2
ccna tutorial
CCNA v4.0 Test module
CCNA VOICE OfficialGuide
CCNA WAN Questions
CCSP, CCVP, CCIP,CCDP, CCIEwww.koenig-solutions.com
Dedicated ServerDedicated Server in$189 Mobile Dialer,Hosted Switchwww.datomato.com
Better than loadbalancerCompare truebroadband bonding toother load balancers.www.mushroomnetworks.
I passed the CCIER&S Labon my first attempt!Steve Clarkin - CCIE#25821www.INE.com/CCIE
Ads by Google CCNA Quiz Answ ers Cisco CCNA Classes CCNA Boot Camp CCNA Video Training Get CCNA Certif ied
QSFP cables fromFinisarHigh-speed activeoptical cables Fromthe trusted leader inopticswww.finisar.com/cables
Property SoftwareSoftware for landlordsand propertymanagers. 60 day freetrial.www.RentManagementSo
Cisco CCIE R&S,SecurityCisco CCIE R&S Labrental Cisco CCIESecurity Lab Rentalwww.GigaVelocity.com
i-cut Tools &AccessoriesKnife Blades, RouterBits Great Prices OnAll Consumableswww.icuttools.com
F5 TrainingF5 Authorised TrainingCentre BIG-IP LTM,GTM, ASM, WATrainingwww.rededucation.com
Ads by Google CCNA 1 Final Exam CCNA Wireless Lab Global Know ledge CCNA CCNA Bootcamp India CCNA Cheat Sheet
4/17/2011 Cisco Exploration CCNA 4.0: CCNA 1 Fina
blogspot.com//ccna-1-final-exam-ans 8/11
-
CCNA 3 Final Exam =>latest version
CCNA 2 Final ExamV4.0 Answers
CCNA 1 Final ExamAnswers 2011
Last test CCNA testmodule
2010 (25)
2009 (171)
2008 (69)
CCNA Wireless - Anynetsims available?
CCNA1
ccna1 blog
CCNA1 Chapter 1
CCNA1 Chapter 10
CCNA1 Chapter 11
CCNA1 Chapter 2
CCNA1 Chapter 3
CCNA1 Chapter 4
CCNA1 Chapter 5
CCNA1 Chapter 6
CCNA1 Chapter 7
CCNA1 Chapter 8
CCNA1 Chapter 9
ccna1 final 2011
CCNA1 Final Exam
ccna1 test
CCNA2
CCNA2 Chapter 1
CCNA2 Chapter 10
CCNA2 Chapter 11
CCNA2 Chapter 2
CCNA2 Chapter 3
CCNA2 Chapter 4
CCNA2 Chapter 5
CCNA2 Chapter 6
CCNA2 Chapter 7
CCNA2 Chapter 8
CCNA2 Chapter 9
ccna2 final exam
CCNA3
CCNA3 Chapter 1
CCNA3 Chapter 2
CCNA3 Chapter 3
CCNA3 Chapter 4
CCNA3 Chapter 5
CCNA3 Chapter 6
CCNA3 Chapter 7
ccna3 final exam
CCNA4
CCNA4 Chapter 1
CCNA4 Chapter 2
CCNA4 Chapter 3
CCNA4 Chapter 4
CCNA4 Chapter 5
CCNA4 Chapter 6
CCNA4 Chapter 7
CCNA4 Chapter 8
CCNA4 Chapter 9
CCNA4 FINAL
CCNA: Cisco CertifiedNetwork Associate: FastPass
ccnp
CCNP Lab
CCNP-642-801 Lab
4/17/2011 Cisco Exploration CCNA 4.0: CCNA 1 Fina
blogspot.com//ccna-1-final-exam-ans 9/11
-
CISCO
Cisco ccna v4.0 practice
Cisco IOS access lists : 10things you should know
Cisco Network Magic Pro5.0.8282
Cisco NetworkingAcademy Program CCNAv4.0
Cisco Official tutorials
Cisco Press ICND1 2ndEdition Jan 2008
Cisco Training CCNA IPAddressing - Part 1 of 5
Config Router
Configuring DHCP Server
CONFIGURING STATICROUTING RIP IGRP OSPFON CISCO ROUTER
DHCP
Ebook.CCNA SecurityOfficial Exam CertificationGuide Exam 640-553ExamCertifica.1587202204
EIGRP Summary
Free CCNA Practice Test
GNS3-Topology: CCNACCNP Full Mesh TopologyTemplate
Hackers
Hardening Cisco IOSDevices
How the Application LayerWorks
How To Become A TrueCCNA And To Get A CCNAjob
ICND 2 - Nat SimQuestion
IP adress
Lab 1 - CCNAImplementation SIM
LAN Search Pro 8.4.0
Latest News CCNA
MCSA
Network tools
NEW CCNA3 FINAL
Packet Tracer 5.1
Packet Tracer 5.1 forWindows with CiscoOfficial tutorials
PacketTrap Ping Scan1.1.3301
Pix Firewall Simulator
Practice - Lab - LearningCCNA
Questions And Answers
Redistribution : Rip andOSPF Using PacketTracer
RIPv2 Summary
4/17/2011 Cisco Exploration CCNA 4.0: CCNA 1 Fina
blogspot.com//ccna-1-final-exam-ans 10/11
-
Security
Spam
Spyware
Subnetting in 6 easy steps- part 1
Switching
Take Assessment - EWANFinal Exam - CCNAExploration: Accessing theWAN (Version 4.0)
TCP/IP and the OSIReference Model
Update today
VPN Basic Knowledge...
What CCNA1 labs haveyou encountered so far
2008 Cisco Exploration CCNA 4.0 Home CCNA1 CCNA2 CCNA3 CCNA4
4/17/2011 Cisco Exploration CCNA 4.0: CCNA 1 Fina
blogspot.com//ccna-1-final-exam-ans 11/11