520-IN006B-EN-P PowerFlex 520-Series EMC Filter ... · Publication 520-IN006B-EN-P - September 2013...
2
Publication 520-IN006B-EN-P - September 2013 Installation Instructions PowerFlex 520-Series EMC Filter Installation Catalog Numbers: 25-RF011-AL, 25-RF023-BL, 25-RF014-AL, 25-RF021-BL, 25-RF027-CL, 25-RF035-DL, 25-RF056-EL, 25- RF7P5-AL, 25-RF014-BL, 25-RF018-CL, 25-RF033-DL, 25-RF039-EL, 25-RF8P0-BL, 25-RF014-CL, 25-RF027-DL, 25-RF029-EL Frame A Filter 25-RFxxx-AL Frame B...D Filter 25-RFxxx-BL 25-RFxxx-CL 25-RFxxx-DL Frame E Filter 25-RFxxx-EL Note: The drive side for all frame A...D filters is prewired with three or four wires depending on number of phases. L1 L2 L3 O I DC+ DC– 0V 0V Wait three minutes after shutdown for capacitors to discharge to safe voltage levels. Filter Mounting Frame Screw Size Screw Torque A M5 (#10...24) 1.56...1.96 Nm (14...17 lb-in) B M5 (#10...24) 1.56...1.96 Nm (14...17 lb-in) C M5 (#10...24) 1.56...1.96 Nm (14...17 lb-in) D M5 (#10...24) 2.45...2.94 Nm (21.7...26 lb-in) E M5 (#10...24) 1.56...1.96 Nm (14...17 lb-in) 2 1 M5 M5 M5 5.98...7.34 Nm M8 M8 M5 53...65 lb-in 3 For Frame A...D For Frame E Frame Wire Gauge Screw Torque A...D 0.32...8.4 mm 2 (22...8 AWG) 1.59...1.94 Nm (14.1...17.2 lb-in) E 2.1...26.7 mm 2 (14...3 AWG) 3.09...3.77 Nm (27.3...33.4 lb-in) ATTENTION: Mount the EMC Filter to the Drive Filter Terminal Wiring R/L1 S/L2 T/L3 R/L1 S/L2 T/L3 R/L1 S/L2 T/L3 • All Frame E filters must be mounted on its side. • 600V Frame A drives can be mounted on Frame B filters.
Transcript of 520-IN006B-EN-P PowerFlex 520-Series EMC Filter ... · Publication 520-IN006B-EN-P - September 2013...
Installation Instructions
PowerFlex 520-Series EMC Filter InstallationCatalog Numbers: 25-RF011-AL, 25-RF023-BL, 25-RF014-AL, 25-RF021-BL, 25-RF027-CL, 25-RF035-DL, 25-RF056-EL, 25-RF7P5-AL, 25-RF014-BL, 25-RF018-CL, 25-RF033-DL, 25-RF039-EL, 25-RF8P0-BL, 25-RF014-CL, 25-RF027-DL, 25-RF029-EL
pl: numbers ok
Frame A Filter25-RFxxx-AL
Frame B...D Filter25-RFxxx-BL25-RFxxx-CL25-RFxxx-DL
Frame E Filter25-RFxxx-EL
Note: The drive side for all frame A...D filters is prewired with three or four wires depending on number of phases.
L1 L2 L3
O
I
DC+ DC–
0V
0VWait three minutes after shutdown for capacitors to discharge to safe voltage levels.
Filter MountingFrame Screw Size Screw Torque
A M5 (#10...24) 1.56...1.96 Nm (14...17 lb-in)B M5 (#10...24) 1.56...1.96 Nm (14...17 lb-in)C M5 (#10...24) 1.56...1.96 Nm (14...17 lb-in)D M5 (#10...24) 2.45...2.94 Nm (21.7...26 lb-in)E M5 (#10...24) 1.56...1.96 Nm (14...17 lb-in)
21
M5 M5
M5
5.98...7.34 NmM8 M8
M5
53...65 lb-in
3For Frame A...D For Frame E
Frame Wire Gauge Screw TorqueA...D 0.32...8.4 mm2 (22...8 AWG) 1.59...1.94 Nm (14.1...17.2 lb-in)
E 2.1...26.7 mm2 (14...3 AWG) 3.09...3.77 Nm (27.3...33.4 lb-in)
ATTENTION:
Mount the EMC Filter to the Drive Filter Terminal Wiring
R/L1 S/L2 T/L3
R/L1 S/L2 T/L3
R/L1 S/L2 T/L3
• All Frame E filters must be mounted on its side.• 600V Frame A drives can be mounted on Frame B filters.
Publication 520-IN006B-EN-P - September 2013
PowerFlex 520-Series EMC Filter Installation
72.0 (2.83)55.0 (2.17)
130.0 (5.12)116.0 (4.57)90.0 (3.54)
5.5 (0.22)24.0 (0.94)25.0 (0.98)
54.0 (2.13)5.5 (0.22)
23.0 (0.91)20.0 (0.79)
30.0 (1.18)5.5 (0.22) 5.5 (0.22)
5.5 (0.22) 5.5 (0.22) 5.5 (0.22)
5.5 (0.22)
5.5(0.22)
5.5 (0.22)
5.5 (0.22)5.5 (0.22)5.5 (0.22)5.5 (0.22)
57.5 (2.26)
54.0 (2.13)
80.0 (3.15)28.0 (1.10)33.0 (1.30)
5.5 (0.22) 5.5 (0.22)33.0 (1.30) 28.0 (1.10) 33.0 (1.30) 28.0 (1.10)
28.0 (1.10)33.0 (1.30)80.0 (3.15) 155.0 (6.10)
110.0 (4.33)
76.0 (2.99)
70.0 (2.76)35.0 (1.38)
375.
0 (1
4.76
)
87.0 (3.43)58.0 (2.28)
72.5 (2.85)57.5 (2.26)
70.0 (2.76)37.0 (1.46)
58.0 (2.28)
25.0 (0.98) 28.0 (1.10)
76.0 (2.99)90.5 (3.56)
109.0 (4.29)
90.0 (3.54) 110.0 (4.33)5.5 (0.22) 5.5 (0.22)
390.
0 (1
5.35
)
375.
0 (1
4.76
)
298.
0 (1
1.73
)
310.
0 (1
2.20
)
298.
0 (1
1.73
)
247.
0 (9
.72)
223.
0 (8
.78)
234.
0 (9
.21)
223.
0 (8
.78)
140.
0 (5
.51)
258.
0 (1
0.16
)
168.
0 (6
.61)
258.
0 (1
0.16
)27
0.0
(10.
63)
140.
0 (5
.51)
5.5 (0.22)
5.5 (0.22)
207.
0 (8
.15)
263.
0 (1
0.35
)
275.
0 (1
0.83
)26
3.0
(10.
35)
BLACK BLACK
L1 L2 L3BLACK YELLOW
&GREEN
BLACK BLACK
L1 L2 L3BLACK YELLOW
&GREEN
BLACK BLACK
L1 L2 L3BLACK YELLOW
&GREEN
BLACK BLACK
L1 L2 L3BLACK YELLOW
&GREEN
25-RF011-AL25-RF014-AL
Frame A Filter25-RF7P5-AL
Dimensions All dimensions are in mm (in.)
Frame B Filter25-RF014-BL25-RF021-BL
25-RF023-BL25-RF8PO-BL
Frame C Filter25-RF014-CL25-RF018-CL
25-RF027-CL
Frame D Filter25-RF027-DL25-RF033-DL25-RF035-DL
Frame E Filter25-RF029-EL25-RF039-EL25-RF056-EL
Publication 520-IN006B-EN-P - September 2013Supersedes Publication 520-IN006A-EN-P - December 2012 Copyright © 2013 Rockwell Automation, Inc. All rights reserved.
Allen-Bradley, Rockwell Software, Rockwell Automation, PowerFlex and TechConnect are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
U.S. Allen-Bradley Drives Technical Support - Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, E-mail: [email protected]: http://www.ab.com/support/abdrives
