Lateral Forehead Flap: A Reliable Flap in Difficult Conditions
516509 L 11/16/10 2:59 AM Page 1 CLOW FLAP VALVES, · PDF fileclow valve company flap valve -...
Transcript of 516509 L 11/16/10 2:59 AM Page 1 CLOW FLAP VALVES, · PDF fileclow valve company flap valve -...
CLOW VALVE COMPANY
CLOW FLAP VALVES, IBBM
516509_L 11/16/10 2:59 AM Page 1
CLOW VALVE COMPANY
FLAP VALVE - FLANGEPARTS LIST
516509_L 11/16/10 2:59 AM Page 2
CLOW VALVE COMPANY
FLAP VALVE - FLANGEGENERAL DIMENSIONS
516509_L 11/16/10 2:59 AM Page 3
CLOW VALVE COMPANY
SUGGESTED SPECIFICATIONSCLOW FLAP VALVES
The valve shall be constructed with a 10º offset from verticalto ensure positive closure. The flange shall be drilled usingan ANSI 125 pound template. Valves shall be as furnished byClow Valve (F-3012-T) or approved equal.
516509_L 11/16/10 2:59 AM Page 4
CLOW VALVE COMPANY
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
T-3012-T FLAP VALVES
* Food grade grease similar to Mystik FG-2.
516509_L 11/16/10 2:59 AM Page 5
CLOW VALVE COMPANY
CLOW SHEAR GATES, IBBM
516509_L 11/16/10 2:59 AM Page 6
CLOW VALVE COMPANY
SHEAR GATE - FLANGE ENDSINGLE WEDGE
516509_L 11/16/10 2:59 AM Page 7
CLOW VALVE COMPANY
SHEAR GATE - FLANGE ENDSINGLE WEDGE
516509_L 11/16/10 2:59 AM Page 8
CLOW VALVE COMPANY
SUGGESTED SPECIFICATIONSCLOW SHEAR GATES
Lift rods are used to manually raise and lower the Shear Gate discfrom a position above the gate. A cast iron catch hook may be adjustedon the lift rod to allow the rod to be hung on a hanger placed in thewall. Lift rod material is 3/4" dia. carbon steel. Catch and loop handleare cast iron. Lift rods may be made to specified length in 6" incre-ments.
516509_L 11/16/10 2:59 AM Page 9
CLOW VALVE COMPANY
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
F-3000-T SHEAR GATES
516509_L 11/16/10 2:59 AM Page 10
516509_L 11/16/10 2:59 AM Page 11
516509_L 11/16/10 2:59 AM Page 12
CLOW VALVE COMPANY
CLOW MUD VALVES, IBBM
Mud valves are recommended for use in applicationswith low seating or unseating pressures only.
516509_M 11/16/10 3:01 AM Page 1
CLOW VALVE COMPANY
RESILIENT SEATED MUD VALVE - RISING &NON-RISING STEMS
516509_M 11/16/10 3:01 AM Page 2
CLOW VALVE COMPANY
RESILIENT SEATED MUD VALVE - RISING &NON-RISING STEMS
516509_M 11/16/10 3:01 AM Page 3
CLOW VALVE COMPANY
SUGGESTED SPECIFICATIONSCLOW MUD VALVES
The Mud valve shall be of the heavy duty flanged type designed toprovide a positive seal under both seating and unseating headconditions. The Valve shall be (non rising) (rising) stem style asdetailed on the schedule or the plans.
The seat ring shall be bronze with a tapered, accurately machinedseating face. The plug seat shall be a seamless molded ring ofBUNA-N tapered to accurately mate with the seat ring to form apositive seal.
Mud valves shall be F-3075-T non-rising stem design or F-3085-Trising stem design as furnished by Clow Valve or approved equal.
516509_M 11/16/10 3:01 AM Page 4
CLOW VALVE COMPANY
INSTALLATION, OPERATION AND MAINTENANCE MANUALF3075-T/F3085-T CLOW MUD (PLUG) VALVES
* Food grade grease similar to Mystik FG-2.
516509_M 11/16/10 3:01 AM Page 5