5.1 version
15
5.1 VERSION New Features 03/09/2014
description
5.1 version. New Features. List of new features. The new features introduced with the DigiEye software version 5.1 are : DUAL-LAN 802.1x VIDEO PROCESSING MULTIBRAND IP CAMERAS CONFIGURATION ADVANCED DIGITAL SIGNAGE ADVANCED STREAMFLEX. DUAL-LAN Dual network interface. - PowerPoint PPT Presentation
Transcript of 5.1 version
5.1 VERSION
New Features03/09/2014
List of new features
03/09/2014
The new features introduced with the DigiEye software version 5.1 are:
1. DUAL-LAN
2. 802.1x
3. VIDEO PROCESSING MULTIBRAND
4. IP CAMERAS CONFIGURATION
5. ADVANCED DIGITAL SIGNAGE
6. ADVANCED STREAMFLEX
New advanced modes that offer the following advantages: MORE PERFORMANCE up to 2 Gb / s, MORE SECURITY thanks to the separation of the networks dedicated to the cameras and centralization, MORE RELIABILITY in case of malfunction of the network equipment (high-availability)
Advanced management of the 2 Ethernet network interfaces available on the DigiEye
03/09/2014
NETWORK CAMERASCENTRALE DI
VIDEOSORVEGLIANZA
DUAL-LANDual network interface
NETWORK CAMERAS
PC / MOBILE
DIGIEYE
2 Gb/s
IP Network
VIDEO SURVEILLANCE
CENTER
LAN1 LAN2
DUAL-LANDual network interface
03/09/2014
■ PERFORMANCE - LOAD BALANCE mode that optimally adjusts the flow of data on the 2 network interfaces that are used simultaneously - effectively bringing the network bandwidth available on DigiEye to 2 Gb / s.
■ SECURITY - INDEPENDENT NETWORK mode that allows to manage two separate IP networks. This mode is typically needed to separate the network of IP cameras, which generate a high data traffic, from the company network used to access to the DigiEye system(s); the level of security of the whole system is therefore highly increased.
■ RELIABILITY - ACTIVE BACKUP mode that allows to increase the level of reliability in case of malfunctioning of the network infrastructure. In case of failure of the primary network, the DigiEye connectivity can be ensured by connecting the system also to a secondary network, by using 2 ports of the same network switch or by connecting the DigiEye to 2 separate switches.
The 802.1x standard allows that each port physically connected to the network has to be authenticated by a dedicated server (typically a RADIUS server), eliminating the possibility of unauthorized access by physical connection to the network.
The IEEE 802.1x standard enables Digieye to access networks protected by this security service.
03/09/2014
NETWORK CAMERASCENTRALE DI
VIDEOSORVEGLIANZA
IEEE 802.1xStandard for network authentication
DIGIEYE(802.1x Supplicant)
NETWORK SWITCH(802.1x Authenticator)
RADIUS Server(802.1x Authentication server)
Request
Authorization
Request
IEEE 802.1xStandard for network authentication
03/09/2014
■ This mechanism requires that the DigiEye (Supplicant) is connected to the network switch (Authenticator) with support for 802.1x and that it is configured to authenticate the DigiEye via a dedicated server (Authentication server).
■ The 802.1x authentication can be performed individually for each network port on the DigiEye.
DIGIEYE(802.1x Supplicant)
NETWORK SWITCH(802.1x Authenticator)
RADIUS Server(802.1x Authentication server)
Request
Authorization
Request
The DigiEye now allows to process the IP video in the same way as the analog video, using all the advanced features of video analysis that, prior to this version, were available only for analog video.
MOTION DETECTION MULTI-ZONE, up to 6 distinct areas of motion detection can be defined for each camera image and, in the case of PTZ cameras, for each defined preset.
MOTION DIRECTIONAL detecting the direction of movement of an object in the image
PERMANENCE CONTROL able to identify the presence of abandoned objects in the scene.
VIDEO TAMPERING alarm in the event that the camera image is blinded / blurred / out-of-focus / out-of-position or in case of absence of signal.
Video Processing: IP video as analog video. Functions available for all IP cameras regardless of brand / model.
VIDEO PROCESSING MULTIBRANDSupport for multi-vendor IP cameras
03/09/2014
VIDEO PROCESSING MULTIBRANDSupport for multi-vendor IP cameras
MULTI-BRAND because the above functions are available for all IP cameras (*), regardless of the brand / model.
* IP cameras non-motorized with RTSP protocol and H.264 video encoding
03/09/2014
Configuration of the SYAC▪TB IP cameras’ parameters through DigiEye
IP CAMERAS CONFIGURATIONIP video streaming parameters
03/09/2014
No need anymore to access to the configuration through a PC: the parameters of the SYAC▪TB IP cameras (series N1) can now be configured directly from the DigiEye
IP CAMERAS CONFIGURATIONIP video streaming parameters
03/09/2014
The configuration capabilities using STREAM 1 are related to the parameters of video streaming:■ VIDEO RESOLUTION■ CODIFICATION TYPE■ BITRATE/FRAMERATE
STREAM 2 will be shortly able to enhance the video IP recording / viewing / analysis / transcoding functions
Titling with information updated in real time
View video in emergency situations
More storage for movies and time schedule programming
Digital Signage advanced options are now available
NETWORK CAMERAS
DIGITAL SIGNAGEAdvanced functions
News update : UK, Prime minister declares
ALERT : FIRE ALARM - GO TO NEAREST EXIT
03/09/2014
DIGITAL SIGNAGEAdvanced functions
03/09/2014
■ Titling with information updated in real time: Possibility of titling the video with scrolling text (crawl) which is obtained from web services, also in local networking, type RSS-feed. It is therefore possible to display updated information in real time (news, weather, ...) along with the Digital Signage programmed video footage
■ View video in emergency situations: Ability to use the Digital Signage as an alarm/assistance system in case of emergency situations: for example, in case of a fire alarm, DigiEye can display on a video monitor the evacuation procedure, the escape paths, etc
■ More storage for films and possibility of time scheduling: The storage space for films has been increased to 8GB and it is now possible to time schedule the Digital Signage according to each slot/alarm defined in DigiEye
Proprietary function that allows to adjust the IP (also megapixels) video for transmission even on narrow band networks
ADVANCED STREAMFLEXScheduler settings
NETWORK CAMERAS
DIGIEYE
IP Network
VIDEO SURVEILLANCE
CENTER
DAY MODE (08-20)
Max.1 Mbit/s
MOBILE
NETWORK CAMERAS
DIGIEYE
IP Network
VIDEO SURVEILLANCE
CENTER
NIGHT MODE (20-08)
Unlimited
Mobile
03/09/2014
ADVANCED STREAMFLEXScheduler settings
03/09/2014
■ The DigiEye software 5.1 version further enhances this functionality by allowing to set all the parameters that control the connectivity and bandwidth for each time or alarm phase defined on the DigiEye.
■ For example, DigiEye can be set so that the connectivity during the day is limited to 1 Mbit/s while during the night there is no restriction; or so that it allows connections only from the Video Surveillance Center and not from mobile devices.
Thanks to the Streamflex function, DigiEye is able to adjust the IP video (also megapixel) for transmission even on low band networks
Thank you for your attention
SYAC▪TBTECHBOARD Security DivisionArea Science Park Padriciano, 9934149 TriesteITALYTel. 059 [email protected]
TECHBOARDVia Della Scienza, 5041100 ModenaITALYTel. 059 [email protected]
03/09/2014
