51. Increasing Safety of Bomb Disposal Missions- A Body Sensor Network Approach

3
INCREASING SAFETY OF BOMB DISPOSAL MISSIONS- A BODY SENSOR NETWORK APPROACH AIM: The main aim of the project is to implement a wireless communication system in the field of electronics by which we can collect the data from the person section where sensors are placed. PURPOSE: The purpose of this project to increase the safety of operatives in missions through monitoring, fusion of health information, and remote alerts. BLOCK DIAGRAM: PERSON SECTION: BASE SECTION: MICRO CONTROLLER (LPC2148) Power Supply Te mpe rature Se nsor MEMS ZIGBEE TRANCEIVER DC MOTOR MICRO CONTROLLER (LPC2148) LCD ZIGBEE TRANSCEIVER PC Power Supply

description

INCREASING SAFETY OF BOMB DISPOSAL MISSIONS

Transcript of 51. Increasing Safety of Bomb Disposal Missions- A Body Sensor Network Approach

INCREASING SAFETY OF BOMB DISPOSAL MISSIONS- A BODY

SENSOR NETWORK APPROACH

AIM:

The main aim of the project is to implement a wireless communication system in the field of

electronics by which we can collect the data from the person section where sensors are placed.

PURPOSE:

The purpose of this project to increase the safety of operatives in missions through monitoring,

fusion of health information, and remote alerts.

BLOCK DIAGRAM:

PERSON SECTION:

BASE SECTION:

MICRO

CONTROLLER

(LPC2148)

Power Supply

Temperature

Sensor

MEMS

ZIGBEE

TRANCEIVER

DC MOTOR

MICRO

CONTROLLER

(LPC2148)

LCD

ZIGBEE

TRANSCEIVER

PC

Power Supply

DESCRIPTION:

In this project there are two sections. The first section is person section and another

section is base section. In the person section the temperature sensor will sense the body temperature of

the person and sends to the ADC pin of the ARM board .ADC will convert this information and send to

the micro controller. Person position is recognized through mems technology, mems can take that

information and sending to micro controller. By sending all this information to base section through

zigbee transreceiver. Micro controller displays this information in the LCD and in the PC. And at the

person section if the person feels hot at that time automatically dc motor is on to cool her body.

TECHNOLOGY:

ZIGBEE:

Now a day's every system is automated in order to face new challenges. In the present days

Automated systems have less manual operations, flexibility, reliability and accurate. Due to this demand

every field prefers automated control systems. Especially in the field of electronics automated systems are

giving good performance. And this is realized by making use of Zigbee technology for communication.

Zigbee is new wireless technology guided by IEEE 802.15.4 Personal Area Network standard. It is

primarily designed for the wide ranging controlling applications and to replace the existing non-standard

technologies. It currently operates in 868MHz band at a data rate of 20Kbps in Europe, 914MHz band at

40kbps in USA, and the 2.4GHz ISM bands Worldwide at a maximum data-rate of 250kbps.

HARDWARE COMPONENTS:

Microcontroller(ARM-7)

Power supply

ZIGBEE transceiver

LCD

PC

Temperature Sensor

MEMS

DC MOTOR

SOFTWARE TOOLS:

Keil

Embedded C

Express PCB

RESULT:

By this project we can implement a safety bomb disposal mission which is useful for controlling the

temperature of a body.