5080 Network Fiber Modules - industrialzone.com · MMB-2, Model MMB-3 or Model PSR-1. The...
Transcript of 5080 Network Fiber Modules - industrialzone.com · MMB-2, Model MMB-3 or Model PSR-1. The...
Network Fiber Modules 5080 s Industry, Inc. Building Technologies Division
s Data Sheet Fire Safety & Security Products
MXL / MXLV [with FireFinderTM XLS]
Network Fiber Modules Models D2300CPS and D2325CPS
Product Overview The Siemens Fire Safety Models D2300CPS (multi-mode) and D2325CPS (single-mode) fiber-optic interface modules can be used to transmit RS-485 communication between FireFinder XLS and MXL intelligent, addressable fire-alarm control panels ─ which includes H-Net communication between FireFinder XLS main and remote panels; M-Net communication between MXL main and remote panels; and X-Net communication between MXL or FireFinder XLS panels. Models D2300CPS and D2325CPS can act as either a repeater or an end-point unit. The fiber-optic interface modules are powered by 24VDC from the fire-alarm control panels. Models D2300CPS and D2325CPS can be powered from the Model PSC-12 power supply or Model PSX-12 power supply extender when used with the FireFinder XLS. When used with the MXL system, Models D2300CPS and D2325CPS can be powered from Model MMB-2, Model MMB-3 or Model PSR-1. The fiber-optic interface modules can also be powered by Model PAD-3 or Model PS-35.
Specifications Using the model D2300-MP mounting plate, two (2) Models D2300CPS and D2325CPS modules can be mounted in any FireFinder XLS CAB-series enclosure.
For the MXL, up to two (2) Model D2300CPS or Model D2325CPS modules can be mounted in any MXL enclosure that will accept a given Model MOM-4, using the Model MXL-MPFO mounting plate. When using System 3TM-style rails that mount on the MXL’s Model MBR-2 or Model MME-3 backbox, Model MSR-1. Model D2300CPS or Model D2325CPS can also be mounted with the System 3 bracket, Model MPFO. Up to three (3) brackets can be installed on a single rail.
The Model D2300CPS module can also operate in either a daisy chain or star configuration, allowing for network configurations that are not possible with RS-485 networks alone.
The connection between the Model D2300CPS modules uses two (2), high-quality duplex 50/1 25 or 62.5/1 25 fiber-optic cables and ST-style fiber connectors. The duplex fiber-optic cable has two (2) cables in a single shield similar to an electrical zip cord. Each segment of the fiber network can be up to 1.9 miles.
The connection between the Model D2325CPS modules uses two (2), high-quality duplex 9/125 fiber optic cables and ST-style fiber connectors. The duplex fiber-optic cable has two (2) cables in a single shield similar to electrical zip cord. Each segment of the fiber network can be up to 10 ��les.
• Works with H-Net, M-Net, or X-Net
• Style 4 or Style 7 Communication
• Uses multi-mode or single-mode optical fiber pairs
• Power provided by the fire-alarm control panel
• Acts as network repeater
• Daisy-chain or Star configurations
• UL 864 9th Edition Listed, ULC Listed
ARCHITECT AND ENGINEER SPECIFICATIONS
(713)-395-1508Fax: (713) [email protected]
IndustrialZoneP.O. Box 667306Houston, Texas 77266United States
s Industry, Inc. Building Technologies Division
Fire Safety 8 Fernwood Road Florham Park, NJ 07932 Tel: (973) 593-2600 FAX: (908) 547-6877 URL: www.SBT.Siemens.com/FIS
(SII‐FS) Printed in U.S.A.
Fire Safety 2 Kenview Boulevard Brampton, Ontario L6T 5E4 / Canada Tel: (905) 799-9937 FAX: (905) 799-9858
December 2010 Supersedes sheet dated 7/09
(Rev. 2)
Specifications ─ (continued)
For both multi-mode and single-mode installations, overall system-fiber length is limited by the communication delay across the entire fiber network. Total network length should not exceed 70,000 feet.
Details for Ordering
For both fiber-optic interface modules (Models D2300CPS and D2325CPS), there are five (5) light-emitting diode (LED) indicators for Power and Status. The Power LED is green and lights whenever there is 24VDC. Both channels A and B have a yellow and green LED. The green LED indicates the module is transmitting data on that channel. The yellow LED light will trigger when data is received.
Temperature and Humidity Range Models D2300CPS and D2325CPS are approved for operation within the temperature range of 32° to 120°F (0°C to 49°C), and at a relative humidity of 93+/-2% at a temperature of 90+/-3°F (32+/-2°C).
Notice: This marketing data sheet is not intended to be used for system design or installation purposes. For the most up-to-date information, refer to each product’s installation instructions.
Model Number
Part Number
Description
D2300CPS 500-650018 Multimode Fiber-Optic Interface Module
D2325CPS 500-650019 Single mode Fiber-Optic Interface Module
D2300-MP 500-634758 FireFinder XLS Fiber Module Mounting Plate
MXL-MPFO 500-692880 MXL Fiber Module Mounting Plate
SYS3-MPFO 500-692881 Fiber Module Mounting Plate
Installation and Operation Manual [IOM]
Model Number
Part Number
Description
MMB-3 315-078860 MXL Main Control Board
(with MBP-MP plate)
Note: For further details, refer to MXL IOM manual: 315-092036.
Related Documentation Product Data Sheet Number
MXL 5000
NIM-1W 5069
XLS 6300
(713)-395-1508Fax: (713) [email protected]
IndustrialZoneP.O. Box 667306Houston, Texas 77266United States