5000 series - Farnell · A-22 APEM 5000 series Toggle switches Distinctive features A THE WIDEST...
Transcript of 5000 series - Farnell · A-22 APEM 5000 series Toggle switches Distinctive features A THE WIDEST...
A-22 APEM www.apem.com
5000 seriesToggle switchesDistinctive features
A
THE WIDEST RANGE IN MINIATURE SWITCHES
17 actuators including toggles, paddle levers and locking levers in different lengths.
5 contact materials from dry circuit to 6A 125VAC and high inrush up to 120A 2 ms.
8 functions including maintained and momentary versions.
1 to 4 pole configurations.
12 terminal types including 9 for PC board mounting.Other types include quick-connect and wire-wrap.
6 bushing styles from 6 (.236) plain to 11,9 (15/32) threaded.
3 types of finish including military black.
4 approvals (UL - CSA - VDE - CECC) and 3 listings.
4 types of sealing for terminal or front panel requirements.
Numerous accessories available for actuator and bushing options.
APEM www.apem.com A-23
5000 seriesToggle switches
Specifications
A
MATERIALS
• Case : diallylphthalate (DAP) or high temperature plastic material(UL94-V0)
• Actuator : brass, chrome plated• Bushing : brass, nickel plated• Housing : stainless steel or steel
tin plated• Contacts
A : silverAD : silver, gold platedCD : brass, gold platedX814 : for peak currrents, see section G.
• Terminal seal : epoxy• Paddles : UL94HB polyamide• Lever caps : vinyl
ELECTRICAL SPECIFICATIONS
• Current/voltage rating with resistive load :
Contact Maximum Minimum Level*
Silver (A) 3A 250VAC - 6A 125VAC - 4A 30VDC 50mA 10VDC III and IV
Silver, 3A 250VAC - 6A 125 VAC - 4A 30VDC 10mA 50mV I to IVgold plated (AD) Gold plating withstands up to 100mA 30VDC 10µA 5V
Brass, 0,4 VA at 20VAC or DC 10mA 50mV I and IIgold plated (CD) 10µA 5V
• For inductive, lamp or capacitive load, consult factory. * For details, see Technical Information, end of catalogue.• Initial contact resistance : 10 mΩ max.• Insulation resistance : 1.000 MΩ min. at 500VDC• Dielectric strength :
1.000 Vrms 50 Hz min. between terminals1.500 Vrms 50 Hz min. between poles1.500 Vrms 50 Hz min. between terminals and frame
• Contact bounce : 2 ms max.• Electrical life at full load :
50.000 cycles for single and double pole40.000 cycles for 3 pole30.000 cycles for 4 pole
• Low level or mechanical life : 100.000 cycles
GENERAL SPECIFICATIONS
• Torque : 1,25 Nm (.922 Ft.lb) max. applied to nut• Panel thickness : 2,5 mm (.098) with 2 nuts - 4 mm (.157) with 1 nut• Operating temperature : -40°C to +85°C
AGENCY APPROVALS/PREFERENTIAL LISTS
For VDE, refer to 55000 series.
QPL (Europe only)MUAHAGNATO
Availability : consult factory for details of approved models.
Marking : to order switches marked UL, CSA or CECC, complete appropriatebox of ordering format.Preferential lists do not appear on the switches.
CECC 96201-007
EN 61058-1
A-24 APEM www.apem.com
5000 seriesToggle switchesOverview
A
5
SERIES
Terminals and bushing
0 Straight PC terminals, 5,08 (.200) terminal spacing, with Ø 6,35 (1/4) threaded bushing
1 Straight PC or quick-connect terminals, 4,70 (.185) terminal spacing, with Ø 6(.236) threaded bushing.
2 Straight PC terminals, 4,70 (.185) terminalspacing, right angle, quick-connect or wire wrap terminals, with 6,35 (1/4)threaded bushing
3 Straight PC terminals, 4 (.157) terminal spacing, with Ø 6 (.236) threaded bushing
4 Straight PC terminals, 4 (.157) terminal spacing or right angle terminals , withØ 6,35 (1/4) threaded bushing
5 Solder lug terminals, with Ø 6 (.236)threaded bushing.
6 Solder lug terminals, with Ø 6,35 (1/4) or Ø 11,9 (15/32) threaded bushing.
7 Solder lug terminals, with Ø 6,35 (1/4) flatted bushing.
9 Straight PC or quick-connect terminals,with Ø 6,35 (1/4) flatted bushing, 4,70 (.185) terminal spacing.
Number of poles
3 Single pole4 Double pole5 Three pole6 Four pole
Electrical functions
6 ON - ON9 ON OFF ON7 MOM OFF MOM8 ON OFF MOM2 ON - MOM
4 ON ON ONON ON MOM MOM ON MOM
Function 4Must not have blank in"connections" box.. Must not have blank in"momentary" box.
Connections forfunction 4
TH StandardCT ReversedSee wiring diagrams end ofsection B.. For functions 4, 4-1R, 4-2R.Leave blank for all otherfunctions.
Momentary forfunction 4
1R ON ON MOM2R MOM ON MOM
Leave blank for otherfunctions.
Terminals
Blank Solder lugs or straight PC depending on model
M Solder lugs with Ø 11,9 (15/32) bushing (5600 switches)
MIWR Wire wrap (for 5200 switches only)W Right angle, horizontal mounting
(5200 - 5400 switches)WW Right angle, vertical mounting
(5200 - 5400 switches)Y ]Y4 ] Bracket mounting (5200 switches)Y6 ]Y7 ]Z Quick connect (5200 - 5100 - 5900
switches)
ABOUT THIS SERIESOn the following pages, you will find successively :- model structure of switches with threaded bushing - model structure of switches with plain bushing- options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
NOTICE : please note that not all combinations of above numbers are available.Refer to the following pages for further information.
APEM www.apem.com A-25
5000 seriesToggle switches
Overview
A
Sealing boots are available. They are presented in section H.
Mounting accessories : standard hardware supplied with all models with Ø 6,35 (1/4) or Ø 6 (.236) threaded bushing :2 hex nuts 8 mm (.314) across flats, 1 locking ring and 1 lockwasher.Standard and special hardware available are presented in section I.
Packaging unit : 25 pieces or 50 pieces depending on models.
Finish
Blank Bright chrome finishG Matt black finish on
bushing, actuator andhardware.
Fluorescent tip
Blank None0.38 White fluorescent
tip to lever
Available with matt blackfinish (G) only.
Special options
Blank No special requirement
X408 Front panel sealing by two O-rings
X404 Horizontal right angle with reduced overall dimensions
Other : specific bushingheight, PC terminal length,finish, ratings, etc... Seefollowing pages.
Caps and paddles
Caps LengthU270 11 (.433)U1710 7,3 (.287)
PaddlesU240N 12,4 (.488)U290N 20 (.787)U390N 21,5 (.846)
Contact materials
A SilverAD Silver, gold platedCD Brass, gold plated
For peak currents, see X814,under Special Options.
Sealing
Blank No sealing except where standard
B Epoxy sealed terminals
K Front panel sealing by one O-ring and sealing washer
Sealing by two O-rings, seeX408 under "Specialoptions".
Levers
Length with threaded plainbushing bushing
-13 (std) 10,5 (.413) 13,5 (.531)-2 16 (.629) 19 (.748)-7 - 6,6 (.259)-8 (flat) 21,3 (.838) --9 (flat) 11,4 (.448) --12 (flat) 6,3 (.248) --16 5,5 (.216) 8,5 (.334)-17 7 (.275) 10 (.393)-21 (+ U640) 21,3 (.838) -insulated-22 21,3 (.838) --23 14 (.551) --24 (large) 17,5 (.688) --25 16,30 (.642)-27 (large) 11,7 (.460) -
-4N 9 (.354) 12 (.472)4N for use with paddle actuators only.
Approvals
ULCSAVDECECC
Availability :Consult factory for details ofapproved models.
Locking levers
1V 1 locked position2V 2 locked positions3V 3 locked positions
Other, consult factory.For models with Ø 6,35 (1/4) bushing.
A-26 APEM www.apem.com
5000 seriesToggle switches - solder lug terminalsThreaded bushing Ø 6,35 (1/4) : 5600
A
Single pole
Double pole
Three pole
MODELSTRUCTURE
III II I2-3 1-2
5636 ON - ON5639 ON OFF ON5637 MOM OFF MOM5638 ON OFF MOM5632 ON - MOM
III II I2-3 1-25-6 4-5
5646 ON - ON5649 ON OFF ON5647 MOM OFF MOM5648 ON OFF MOM5642 ON - MOM5644* ON ON ON5644 1R* ON ON MOM5644 2R* MOM ON MOM
III II I2-3 1-25-6 4-58-9 7-8
5656 ON - ON5659 ON OFF ON5657 MOM OFF MOM5658 ON OFF MOM5652 ON - MOM
• 1, 2, 3 and 4 pole configurations
Shown with standard lever (-13)
Keyway
Keyway
Keyway
* Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
Keyway
1 2 3(.070)
(.043)
(.14
5)
(.07
4)
3.70
1.90
1.80
1.10
(.039)1.00
10.50(.413) (.314)
8.00
(.03
1)0.
80
(.01
9)0.
50
24˚
(.11
8 D
IA)
Ø3.
00
(.07
0)1.
80
(.51
9)13
.20
7.00(.275)
(.18
5)4.
70
(.472)12.00
(.145)3.70
(1/4-40UNS)Ø6.35-40UNS
I
II
III
3
2
1
13.2
0(.
519)
24˚
Ø3.
00(.
118
DIA
)
1.80
4.75
(.07
0)
(.18
7)
4.70
(.18
5)
0.80
(.03
1)
8.00(.314)(.413)
10.50
3.70(.145)
0.50
(.01
9)
12.00(.472)1.00
(.039)
Ø6.35-40UNS(1/4-40UNS)
(.472)12.00
IIIIII
II
I
1
2
3 6
5
4
24˚
(.51
9)13
.20
(.11
8 D
IA)
Ø3.
00 (.07
0)1.
80
10.50(.413) (.314)
8.00
(.039)1.00
(.01
9)0.
50(.
031)
0.80
(.145)3.70
(.516)13.10
(1/4-40UNS)Ø6.35-40UNS
(.649)16.50
(.18
7)4.
75
III
II
I3
2
1 7
8
9
(.18
5)4.
70
APEM www.apem.com A-27
5000 seriesToggle switches - solder lug terminals
Threaded bushing Ø 6,35 (1/4) : 5600
A
Four poleIII II I2-3 1-25-6 4-58-9 7-811-12 10-11
5666 ON - ON5669 ON OFF ON5667 MOM OFF MOM5668 ON OFF MOM5662 ON - MOM5664* ON ON ON5664 1R* ON ON MOM5664 2R* MOM ON MOM
*Function 4 : DP in 4P case - specify CT or TH connections, see end of catalogue.
PANEL CUT-OUT
With K With X408Standard sealing option sealing option
Keyway
13.2
0
1.80
Ø3.
00
(.51
9)
(.07
0)
(.11
8 D
IA)
3.70(.145)
0.80
(.03
1)0.
50(.
019)
13.10(.516)1.00
(.039)
8.00(.314)(.413)
10.50
(1/4-40UNS)Ø6.35-40UNS
(.834)21.20
(.18
7)4.
75
24˚
III
II
I
4.70
(.18
5)
12
11
107
8
9
(.204)
(.255 DIA) (.086 DIA)
(.04
3)
(.106)
Ø6.50 Ø2.20
5.20 2.70
1.10
Ø6.50(.255 DIA)
Ø6.50(.255 DIA)
2.70(.106)
A-28 APEM www.apem.com
5000 seriesToggle switches - solder lug terminals
A
5700 models
• Flatted bushing Ø 6,35 mm (1/4)• 1, 2, 3 and 4 pole configurations
For model structure numbers, refer to5600 models and replace 6 with 7. PANEL CUT-OUT
Standard or with K sealing option
Diagram as per 5600 model
MODELSTRUCTURE
5500 models
• Threaded bushing Ø 6 mm (.236)• 1, 2, 3 and 4 pole configurations
Diagram as per 5600 model
PANEL CUT-OUT
Standard With X408 sealing option
For model structure numbers, refer to5600 models and replace 6 with 5.
MODELSTRUCTURE
(.106)2.70
(.255 DIA)Ø6.50
(.244 DIA)
(.100)(.244)
Ø6.20
6.20 2.55
Ø2.20(.086 DIA)
Ø6.20(.244 DIA)
APEM www.apem.com A-29
5000 seriesToggle switches - solder lug terminals
Threaded bushing Ø 11,9 (15/32) : 5600M
A
Single pole
Double pole
Three pole
• 1, 2, 3 and 4 pole configurations• Supplied with 2 hex nuts and 1 locking ring• Panel thickness up to 6 mm (.236)
III II I2-3 1-2
5636M ON - ON5639M ON OFF ON5637M MOM OFF MOM5638M ON OFF MOM5632M ON - MOM
III II I2-3 1-25-6 4-5
5646M ON - ON5649M ON OFF ON5647M MOM OFF MOM5648M ON OFF MOM5642M ON - MOM5644M* ON ON ON5644M 1R* ON ON MOM5644M 2R* MOM ON MOM
III II I2-3 1-25-6 4-58-9 7-8
5656M ON - ON5659M ON OFF ON5657M MOM OFF MOM5658M ON OFF MOM5652M ON - MOM
MODELSTRUCTURE
Shown with standard lever (-24)
* Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
Keyway
Keyway
Keyway
Keyway
1 2 3(.070)
(.043)
(.14
5)
(.07
4)
3.70
1.90
1.80
1.10
(.03
1)0.
80
(.01
9)0.
50
(.07
0)1.
80
(.18
5)4.
70
(.145)3.70
24˚
(.433)
(.468)(.688)
(.19
6 D
IA)(15/32-32UNS)
13.2
0(.
519)
(.275)7.00
Ø11.9-32UNS
17.50
11.00
11.90
Ø5.
00
III
II
I3
2
1
1.80
4.75
(.07
0)
(.18
7)
4.70
(.18
5)
11.90
11.00
17.50(.688) (.468)
(.433)
24˚
3.70(.145)
0.50
(.01
9)
0.80
(.03
1)
(.51
9)13
.20
12.00(.472)
Ø5.
00
Ø11.9-32UNS(15/32-32UNS)
(.19
6 D
IA)
III
II
I
1
2
3 6
5
4
(.07
0)1.
80
(.01
9)0.
50(.
031)
0.80
(.145)3.70
(.18
7)4.
75
24˚
(.468)(.688)17.50 11.90
(.476)16.50(.649)
12.10
Ø5.
00
Ø11.9-32UNS(15/32-32UNS)
(.19
6 D
IA)
I
II
III
3
2
1
13.2
0(.
519)
7
8
9
(.18
5)4.
70
A-30 APEM www.apem.com
5000 seriesToggle switches - solder lug terminalsThreaded bushing Ø 11,9 (15/32) : 5600M
A
Four poleIII II I2-3 1-25-6 4-58-9 7-811-12 10-11
5666M ON - ON5669M ON OFF ON5667M MOM OFF MOM5668M ON OFF MOM5662M ON - MOM5664M* ON ON ON5664M 1R* ON ON MOM5664M 2R* MOM ON MOM
PANEL CUT-OUT
Standard With K sealing option
*Function 4 : DP in 4P case - specify CT or TH connections, see end of catalogue.
Keyway
OTHER : M bushing can be combined with other types such as : 5200, Z, MIWR... Consult factory.
(.377) (.200)
(.06
6)
(.492 DIA) (.137 DIA)Ø12.50
9.60
Ø3.50
5.10
1.70
Ø12.50(.492 DIA)
1.80
(.07
0)
(.18
7)4.
75
Ø5.
00
Ø11.9-32UNS(15/32-32UNS)
(.19
6 D
IA)
12.10(.476)
11.9017.50(.688) (.468)
24˚
3.70(.145)
0.80
(.03
1)0.
50(.
019)
21.20(.834)
I
II
III
(.51
9)13
.20
1
2
3
4.70
(.18
5)
12
11
10
APEM www.apem.com A-31
5000 seriesToggle switches - straight PC terminals
Threaded bushing Ø 6,35 (1/4) : 5200
A
Single pole
Double pole
Three pole
• Terminal spacing 4,7 mm (.185)• 1, 2, 3 and 4 pole configurations• Epoxy sealed terminals standard
For new projects, we recommend switches with supportbracket (option Y) which holds the switch securely on the PCB.
Other terminal lengths presented under "Special options".Also available with plain bushing, see "Special options" X371
III II I2-3 1-2
5236 B ON - ON5239 B ON OFF ON5237 B MOM OFF MOM5238 B ON OFF MOM5232 B ON - MOM
III II I2-3 1-25-6 4-5
5246 B ON - ON5249 B ON OFF ON5247 B MOM OFF MOM5248 B ON OFF MOM5242 B ON - MOM5244 B* ON ON ON5244 1R B* ON ON MOM5244 2R B* MOM ON MOM
III II I2-3 1-25-6 4-58-9 7-8
5256 B ON - ON5259 B ON OFF ON5257 B MOM OFF MOM5258 B ON OFF MOM5252 B ON - MOM
MODELSTRUCTURE
Shown with standard lever (-13)
Keyway
Keyway
Keyway
*Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
Keyway
1 2 3 1.10(.043)
4.005.
30
(.15
7)
(.20
8)
13.2
0(.
519)
24°
12.00(.472)
Ø3.
00
(.11
8 D
IA)
4.75
(.18
7)
8.00(.314)(.413)
10.50
1.00(.039)
Ø6.35-40UNS(1/4-40UNS)
4.00(.157)
0.50
(.01
9)
0.80
(.03
1)
13.30(.523)
1.10
(.04
3)
4.70
Ø1.60(.063 DIA)
(.185)
(.18
7)4.
75
III
II
I
1
2
3
4.70
(.18
5)
6
5
4
Epoxy
(.039)1.00
10.50(.413) (.314)
8.00
(.03
1)0.
80
(.01
9)0.
50
24°
(.11
8 D
IA)
Ø3.
00
(.51
9)13
.20
7.00(.275)
(.18
5)4.
70
(1/4-40UNS)Ø6.35-40UNS
(.523) (.157)13.30 4.00
(.04
3)1.
10
(.185)
(.063 DIA)Ø1.60
4.70
I
II
III
3
2
1
Epoxy
(.51
9)13
.20
(.11
8 D
IA)
Ø3.
00
(.18
7)4.
75
16.50(.649)
10.50(.413) (.314)
8.00
(.039)1.00
(1/4-40UNS)Ø6.35-40UNS
(.03
1)0.
80
(.01
9)0.
50
(.157)4.00
(.567)14.40
(.04
3)1.
10
(.185)4.70
(.18
7)4.
75
(.063 DIA)Ø1.60
24°
III
II
I3
2
1 7
8
9
(.18
5)4.
70
Epoxy
A-32 APEM www.apem.com
5000 seriesToggle switches - straight PC terminalsThreaded bushing Ø 6,35 (1/4) : 5200 - 5000
A
Terminal spacing 5,08 (.200) - single and double pole
Four poleIII II I2-3 1-25-6 4-58-9 7-811-12 10-11
5266 B ON - ON5269 B ON OFF ON5267 B MOM OFF MOM5268 B ON OFF MOM5262 B ON - MOM5264 B* ON ON ON5264 1R B* ON ON MOM5264 2R B* MOM ON MOM
5000 models
• Terminal spacing 5,08 mm (.200)• Epoxy sealed terminals standard• 1 and 2 pole configurations
Diagram as per 5200 model
III II I2-3 1-25-6 4-5
Single pole Double pole5036 5046 ON - ON5039 5049 ON OFF ON5037 5047 MOM OFF MOM5038 5048 ON OFF MOM5032 5042 ON - MOM
5044* ON ON ON5044 1R* ON ON MOM5044 2R* MOM ON MOM
*Function 4 : DP in 4P case - specify CT ot TH connections, see end of catalogue.
MODELSTRUCTURE
PANEL CUT-OUT
5200 - 5000 - 5400
Standard With K sealing option
Shown with standard lever (-13)
Keyway
Keyway
*Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
(.255 DIA)Ø6.50
1.10
2.705.20
Ø2.20Ø6.50
(.106)
(.04
3)
(.086 DIA)(.255 DIA)
(.204)
21.20
13.2
0
Ø3.
00
(.834)
(.51
9)
4.75
(.18
7)
(.11
8 D
IA)
8.00(.314)(.413)
10.50
(1/4-40UNS)Ø6.35-40UNS
14.40(.567)
4.00(.157)
(.01
9)
1.00(.039)
0.80
(.03
1)(.
043)
1.10
4.70(.185)
(.18
7)4.
75
Ø1.60(.063 DIA)
0.50
24°
III
II
I
4.70
(.18
5)
12
11
10
8
7
9
Epoxy
0.60(.023)
(.21
6)
(.17
1)
5.50
4.35
Ø6.35-40UNS(1/4-40UNS)
Ø3.00(.118 DIA)
10.5
0(.
413)
(.31
4)8.
00
24˚
(.51
5)(.
171)(.200)
13.1
04.
35
5.08(.023)0.60
(.023)0.60
(.023)0.60
(.03
9)1.
00
(.519) (.275)(.472)12.00 13.20 7.00
(.20
0)
(.200)5.08
5.08
(.043 DIA)
5.08
(.20
0)
Ø1.10
EPOXY
1 32
III II I
APEM www.apem.com A-33
5000 seriesToggle switches - straight PC terminals
ADiagram, as per 5200 model
5400 models
• Threaded bushing Ø 6,35 mm (1/4)• Terminal spacing 4 mm (.157)• 1, 2, 3 and 4 pole configurations
For model structure numbers, refer to5200 models and replace 2 with 4.
Panel cut-out, see 5200.
5900 models
• Flatted bushing Ø 6,35 mm (1/4)• Terminal spacing 4,7 mm (.185)• 1, 2, 3 and 4 pole configurations
For model structure numbers, refer to5200 models and replace 2 with 9. PANEL CUT-OUT
Standard or with K sealing option
MODELSTRUCTURE
MODELSTRUCTURE
Flat
1 2 3
(.106)2.70
(.255 DIA)Ø6.50
A-34 APEM www.apem.com
5000 seriesToggle switches - straight PC terminals
A
5100 models
• Threaded bushing Ø 6 mm (.236)• Terminal spacing 4,7 mm (.185)• 1, 2, 3 and 4 pole configurations
For model structure numbers, refer to5200 models and replace 2 with 1.
Diagram, as per 5200 model
5300 models
• Threaded bushing Ø 6 mm (.236)• Terminal spacing 4 mm (.157)• 1, 2, 3 and 4 pole configurations
Diagram, as per 5200 model
For model structure numbers, refer to5200 models and replace 2 with 3. PANEL CUT-OUT
5100 - 5300
Standard With X408 sealing option
MODELSTRUCTURE
Panel cut-out, see below.
MODELSTRUCTURE
(.244 DIA)
(.100)(.244)
Ø6.20
6.20 2.55
Ø2.20(.086 DIA)
Ø6.20(.244 DIA)
APEM www.apem.com A-35
5000 seriesToggle switches - quick-connect terminals
Threaded bushing Ø 6,35 (1/4) : 5200Z
A
Double pole
Single pole
• Terminal spacing 4,7 mm (.185)• Epoxy sealed terminals standard• 1and 2 pole configurations
*Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
MODELSTRUCTURE
III II I2-3 1-2
5236Z ON - ON5239Z ON OFF ON5237Z MOM OFF MOM5238Z ON OFF MOM5232Z ON - MOM
III II I2-3 1-25-6 4-5
5246Z ON - ON5249Z ON OFF ON5247Z MOM OFF MOM5248Z ON OFF MOM5242Z ON - MOM5244Z* ON ON ON5244Z 1R* ON ON MOM5244Z 2R* MOM ON MOM
PANEL CUT-OUT
With K With X408Standard sealing option sealing option
Shown with standard lever (-13)
Keyway
Keyway
Keyway
1 2 3
(.25
5)
(.20
8)
(.061)
6.50
5.30
1.57
(.204)
(.255 DIA) (.086 DIA)
(.04
3)
(.106)
Ø6.50 Ø2.20
5.20 2.70
1.10
Ø6.50(.255 DIA)
Ø6.50(.255 DIA)
2.70(.106)
(.51
9)13
.20
7.00(.275)1.00
(.039)
13.10(.515)
24˚
8.00(.314)(.413)
10.50
0.78
4.70
5.30(.208)
(.03
0)(.
185)
1.57
(.06
1)
EPOXY
12
3
I
II
III
Ø6.35-40UNS(1/4-40UNS)
(.11
8 D
IA)
Ø3.
00Ø
3.00
(.11
8 D
IA)
(1/4-40UNS)Ø6.35-40UNS
13.2
0(.
519)
12.00(.472)
10.50(.413) (.314)
8.00
24˚
(.515)13.10
(.039)1.00
(.18
5)(.
030)
(.18
7)(.208)5.30
4.70
0.78
4.75
(.06
1)1.
57
EPOXY
12
3
I
II
III
A-36 APEM www.apem.com
5000 seriesToggle switches - quick-connect terminals
A
5900Z models
• Flatted bushing Ø 6,35 mm (1/4)• Terminal spacing 4,7 mm (.185)• Epoxy sealed terminals standard• 1and 2 pole configurations
For model structure numbers, refer to5200Z models and replace 2 with 9. PANEL CUT-OUT
Standard orwith K sealing option
5100Z models
• Threaded bushing Ø 6 mm (.236)• Terminal spacing 4,7 mm (.185)• Epoxy sealed terminals standard• 1and 2 pole configurations
For model structure numbers, refer to5200Z models and replace 2 with 1. PANEL CUT-OUT
Standard
Diagram, as per 5900 model
Diagram, as per 5200 model
MODELSTRUCTURE
MODELSTRUCTURE
(.106)2.70
(.255 DIA)Ø6.50
(.086 DIA)Ø2.20
6.20
Ø6.20
(.244)
(.244 DIA)
APEM www.apem.com A-37
5000 seriesToggle switches - wire-wrap terminalsThreaded bushing Ø 6,35 (1/4) : 5200MIWR
A
Terminal spacing 5,08 (.200) - double pole
Terminal spacing 5,08 (.200) - single pole
• Terminal spacing 5,08 mm (.200)• Epoxy sealed terminals standard• 1and 2 pole configurations• Can also be used as extended PCB terminals
*Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
III II I2-3 1-2
5236MIWR ON - ON5239MIWR ON OFF ON5237MIWR MOM OFF MOM5238MIWR ON OFF MOM5232MIWR ON - MOM
III II I2-3 1-25-6 4-5
5246MIWR ON - ON5249MIWR ON OFF ON5247MIWR MOM OFF MOM5248MIWR ON OFF MOM5242MIWR ON - MOM5244 MIWR* ON ON ON5244 1R MIWR* ON ON MOM5244 2R MIWR* MOM ON MOM
MODELSTRUCTURE
PANEL CUT-OUT
With K With X408Standard sealing option sealing option
Shown with standard lever (-13)
Keyway
Keyway
Keyway
1 2 3
(.70
8)
(.66
5)
(.023)
18.0
0
16.9
0
0.60
Ø1.10(.043 DIA) (.200)
5.08
10.50(.413) (.314)
8.00
24˚
(.515)13.10
(.02
3)0.
60
(.039)1.00
0.60
(.02
3)
(.665)16.90
(.275)7.00
(.51
9)
(.20
0)5.
08
13.2
0
EPOXY
12
3
III
II
I
Ø3.
00(.
118
DIA
)
(1/4-40UNS)Ø6.35-40UNS
1.00(.039)
0.60
(.02
3)0.
60(.
023)
5.08
13.10(.
200)
(.515)
24˚
8.00(.314)(.413)
10.50
5.08
5.08
(.20
0)
(.200)
(.472)12.00
(.51
9)13
.20
(.043 DIA)Ø1.10Ø6.35-40UNS
(1/4-40UNS)
(.11
8 D
IA)
Ø3.
00
(.665)16.90
EPOXY
32
1III
II
I
(.204)
(.255 DIA) (.086 DIA)
(.04
3)
(.106)
Ø6.50 Ø2.20
5.20 2.70
1.10
Ø6.50(.255 DIA)
Ø6.50(.255 DIA)
2.70(.106)
A-38 APEM www.apem.com
5000 seriesToggle switches - plain bushing Right angle terminals - horizontal : 5200W
A
Three pole
Double pole
Single pole
• Terminal spacing 4,7 mm (.185)• 1, 2 and 3 pole configurations
Special switch 5200WX404 with reduced overall dimensionsis presented under "Special options".
III II I2-3 1-2
5236W ON - ON5239W ON OFF ON5237W MOM OFF MOM5238W ON OFF MOM5232W ON - MOM
III II I2-3 1-25-6 4-5
5246W ON - ON5249W ON OFF ON5247W MOM OFF MOM5248W ON OFF MOM5242W ON - MOM5244W* ON ON ON5244W 1R* ON ON MOM5244W 2R* MOM ON MOM
III II I2-3 1-25-6 4-58-9 7-8
5256W ON - ON5259W ON OFF ON5257W MOM OFF MOM5258W ON OFF MOM5252W ON - MOM
MODELSTRUCTURE
Shown with standard lever (-13)
*Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
11.00(.433)
6.0013.50(.236)(.531)
Ø3.
00
Ø6.
25(.
246
DIA
)
(.11
8 D
IA)
3.70(.145)
4.70
(.18
5)
5.08
(.20
0)
0.50
0.80
(.01
9)(.
031)
12.7
0
5.08
(.50
0)
(.200)
4.70(.185)
(.275)7.00
(.51
9)13
.20
24˚
7.40 12.70(.500)(.291)
I
II
III
Ø1.60(.062 DIA)
1.10(.043)
(.03
9)1.
00
1
2
3
(.291) (.500) (.150)(.11
8 D
IA)
(.20
0)
(.18
5)
(.531) (.472)(.236)
(.03
1)
0.50
(.24
6 D
IA)
(.145)
(.200)
(.50
0)(.
150)
3.70 13.50 6.00 12.00
5.08
3.8112.707.40
4.70
Ø6.
25
Ø3.
00
0.80
(.01
9)
5.08
12.7
03.
81
(.433)11.00
24˚13
.20
(.51
9)
4.70(.185)
III
II
I
Ø1.60(.062 DIA)1.10
(.043)
(.03
9)1.
00
1
2
3
4
6
Ø3.
00
Ø6.
25(.
246
DIA
)
(.11
8 D
IA)
(.150)(.564)(.283)7.20 14.35 3.81
(.236) (.492)(.531)(.653)
(.145)
(.043)
(.51
9)13
.20
3.70 13.50 6.00 12.516.60
1.10
3.81
14.3
5
5.08
(.15
0)(.
564)
(.196)
(.185)4.70
(.03
1)0.
80
(.062 DIA)Ø1.60
(.18
5)
(.01
9)0.
50
4.70
III
II
I
(.03
9)1.
00
4
5
6
24˚
7
9
5.08
(.20
0)
APEM www.apem.com A-39
5000 seriesToggle switches - plain bushing
Right angle terminals - horizontal : 5400W
A
PCB MOUNTING FOR 5200W
5400W models
• Terminal spacing 4 mm (.157)• 1and 2 pole configurations
Diagram, as per 5200W model
PC LAYOUTFor model structure numbers, refer to5200W single and double pole andreplace 2 with 4.
MODELSTRUCTURE
(.65
3)
(.47
2)
(.27
5)
(.32
6)
(.23
6)
(.13
7)3.
50 7.00
6.00
12.0
0
8.30
16.6
0
SP DP 3P
(.062 DIA)Ø1.60
(.157)4.00
(.200)
(.50
0)
5.08
12.7
0
(.062 DIA)Ø1.60
4.00(.157)
3.81
12.7
0
5.08
(.15
0)(.
500)
(.200)
SP DP
A-40 APEM www.apem.com
5000 seriesToggle switches - plain bushingRight angle terminals - vertical : 5200WW
A
Three pole
Double pole
Single pole
• Pin spacing 3,81 mm (.150)• 1, 2, 3 and 4 pole configurations
III II I2-3 1-2
5236WW ON - ON5239WW ON OFF ON5237WW MOM OFF MOM5238WW** ON OFF MOM5232WW** ON - MOM
III II I2-3 1-25-6 4-5
5246WW ON - ON5249WW ON OFF ON5247WW MOM OFF MOM5248WW** ON OFF MOM5242WW** ON - MOM5244WW* ON ON ON5244WW 1R* ON ON MOM5244WW 2R* MOM ON MOM
III II I2-3 1-25-6 4-58-9 7-8
5256WW ON - ON5259WW ON OFF ON5257WW MOM OFF MOM5258WW** ON OFF MOM5252WW** ON - MOM
MODELSTRUCTURE
Shown with standard lever (-13)
* and ** : see notes next page.
(.500) (.150)
(.531) (.236) (.433)
24˚
(.11
8 D
IA)
(.24
6 D
IA)
(.04
3)
(.222)
(.275)
(.200)
(.039)
(.15
0)(.
500)
(.200)
(.062 DIA)
(.301)
I
II
III
3.81
12.7
0
1.10
Ø3.
00
Ø6.
25
13.50 6.00 11.00 7.00
0.80
3.8112.705.655.08
1.00
Ø1.60
5.08
3.00
(.11
8)(.
519)
13.2
0
3
2
1
13.2
0(.
519)
5.65 12.70 3.81(.222) (.150)(.500)
Ø6.
25
Ø3.
00
(.24
6 D
IA)
(.11
8 D
IA)
11.006.0013.50(.433)(.236)(.531)
24˚0.80
(.301)
(.472)
5.08(.200)
Ø1.60
12.7
03.
81
(.062 DIA)
(.50
0)(.
150)
(.04
3)1.
10
(.18
7)
12.00
I
II
III
4.75
(.11
8)3.
00
6
5
4
3
2
1
5.08(.039)
(.200)
1.00
(.187)4.75
(.11
8 D
IA)
(.24
6 D
IA)
Ø3.
00
Ø6.
25
(.515)13.10
(.500) (.150)3.8112.70
(.283)
4.75
(.18
7)
1.10
(.04
3)
(.649)
(.15
0)(.
500)
3.81
12.7
0
III
II
I
24˚
7.20
16.50
(.03
1)0.
80
3.00
13.2
0(.
118)
(.51
9)
1.00(.039)
(.200)5.08
9
8
7
3
2
1
(.200)5.08
(.062 DIA)Ø1.60
4.75(.187)
(.492)6.00
(.236)12.50
APEM www.apem.com A-41
5000 seriesToggle switches - plain bushing
Right angle terminals - vertical : 5200WW - 5400WW
A
Four poleIII II I2-3 1-25-6 4-58-9 7-811-12 10-11
5266WW ON - ON5269WW ON OFF ON5267WW MOM OFF MOM5268WW** ON OFF MOM5262WW** ON - MOM5264WW* ON ON ON5264WW 1R* ON ON MOM5264WW 2R* MOM ON MOM
* Function 4 : SP in DP case, DP in 4P case - specify CT or TH connections, see end of catalogue.** Functions 2 and 8 : reversed connection available, consult factory.
PCB MOUNTING
5400WW models
• Pin spacing 2,54 mm (.100)• 1, 2, 3 and 4 pole configurations
Diagram as per 5200WW model
For model structure numbers, referto 5200WW models and replace 2 with 4.
PC LAYOUT
MODELSTRUCTURE
12.7
03.
81(.
500)
(.15
0)
Ø6.
25
Ø3.
00
(.24
6 D
IA)
(.11
8 D
IA)
13.10(.515)
7.20(.283)
12.70 3.81(.150)(.500)
(.04
3)1.
10
(.834)
(.18
7)
24˚
I
II
III
(.03
1)
5.08(.200)
0.80
4.75
21.20
(.51
9)(.
118)(.039)
13.2
03.
00
1.00
9
8
7
12
11
10
Ø1.60(.062 DIA)
4.75(.187)
5.08(.200)
12.50(.236)6.00
(.492)
(.25
9)
21.20(.834)
16.50(.649)
12.00(.472)
7.00(.275)
13.2
0(.
519)
6.60
SP DP 3P 4P
5.08
Ø1.60
12.7
02.
54
(.062 DIA)
(.200)
(.50
0)(.
100)
(.10
0)(.
500)
(.062 DIA)
2.54
12.7
0
Ø1.60 Ø1.60
12.7
02.
54
(.062 DIA)
(.50
0)(.
100)
(.062 DIA)Ø1.60
(.10
0)(.
500)
2.54
12.7
0
(.200)5.08
(.200)5.08
(.200)5.08
SP DP 3P 4P
A-42 APEM www.apem.com
5000 seriesToggle switches - plain bushingStraight PC terminals - bracket mounting : 5200Y
A
Short bracket - width 15,75 (.620) - double pole : 5240Y
Short bracket - width 15,75 (.620) - single pole : 5230Y
Brackets reduce mechanical stress on solder jointsand increase resistance to vibrations.Bracket material : tin plated steel.
• Epoxy sealed terminals standard• 1and 2 pole configurations
III II I2-3 1-2
5236Y B ON - ON5239Y B ON OFF ON5237Y B MOM OFF MOM5238Y B ON OFF MOM5232Y B ON - MOM
MODELSTRUCTURE
Y - Y6 Y4 - Y7
Shown with standard lever (-13)
III II I2-3 1-25-6 4-5
5246Y B ON - ON5249Y B ON OFF ON5247Y B MOM OFF MOM5248Y B ON OFF MOM5242Y B ON - MOM5244Y B* ON ON ON5244Y 1R B* ON ON MOM5244Y 2R B* MOM ON MOM
* Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
1.10(.043)
4.005.
30
(.15
7)
(.20
8)
(.043)1.10
(.33
4)
(0.3
85)
9.80
8.50
24˚
(.125)
(.620) (.275)
(.53
1)(.
220)
(.51
1)(.
161)
4.10
13.0
0
5.60
13.5
0
3.18
15.75 7.00
15.7
5(.
620)
3.18(.125)
(.18
5)4.
70
EPOXY
(.062 DIA)Ø1.60
1 2 3
(.118 DIA)
(.246 DIA)Ø6.25
Ø3.00
0.40(.015)
(.046)1.17
III II I
(.62
0)15
.75
(.125)3.18
15.753.18
(.620)(.125)
4.75
Ø6.258.20
4.706.
0013
.10
(.18
5)
(.187)
(.322)(.246 DIA)
(.118 DIA)24˚
(.23
6)(.
515)
III
(.472)
(.51
1)(.
185) 12.00
4.70
13.0
0
EPOXY
(.062 DIA)Ø1.60
321
Ø3.00
(.015)(.046)0.401.17
II I
APEM www.apem.com A-43
5000 seriesToggle switches - plain bushing
Straight PC terminals - bracket mounting : 5200Y4 - Y6 - Y7
A
Tall bracket - width 19,05 (.750) : 5200Y7
Short bracket - width 19,05 (.750) : 5200Y6
Tall bracket - width 15,75 (.620) : 5200Y4
III II I2-3 1-25-6 4-5
Single pole Double pole5236Y7 B 5246Y7 B ON - ON5239Y7 B 5249Y7 B ON OFF ON5237Y7 B 5247Y7 B MOM OFF MOM5238Y7 B 5248Y7 B ON OFF MOM5232Y7 B 5242Y7 B ON - MOM
5244Y7 B* ON ON ON5244Y7 1R B* ON ON MOM5244Y7 2R B* MOM ON MOM
* Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
III II I2-3 1-25-6 4-5
Single pole Double pole5236Y6 B 5246Y6 B ON - ON5239Y6 B 5249Y6 B ON OFF ON5237Y6 B 5247Y6 B MOM OFF MOM5238Y6 B 5248Y6 B ON OFF MOM5232Y6 B 5242Y6 B ON - MOM
5244Y6 B* ON ON ON5244Y6 1R B* ON ON MOM5244Y6 2R B* MOM ON MOM
III II I2-3 1-25-6 4-5
Single pole Double pole5236Y4 B 5246Y4 B ON - ON5239Y4 B 5249Y4 B ON OFF ON5237Y4 B 5247Y4 B MOM OFF MOM5238Y4 B 5248Y4 B ON OFF MOM5232Y4 B 5242Y4 B ON - MOM
5244Y4 B* ON ON ON5244Y4 1R B* ON ON MOM5244Y4 2R B* MOM ON MOM
16.0
0(.
629)
(.51
5)(.
236)
24˚(.118 DIA)
(.246 DIA)(.322)
(.187)
(.18
5)
13.1
06.
00
4.70
8.20
Ø3.00
Ø6.25
4.75
4.70
(.18
5)
(.20
4)5.
20
(.125)
(.125)
(.620)3.18 15.75
3.18
(.125)3.18
(.62
0)15
.75
3.18(.125)
15.7
5(.
620)
EPOXY
(.062 DIA)Ø1.60
1 2 3
(.472)12.00
0.40(.015)(.046)
1.17
III II I
(.250) (.750)
(.51
5)(.
236)
(.51
1)
24˚(.118 DIA)
(.246 DIA)
(.18
5)
(.472)
(.250)
(.322)
(.250)
(.250)
(.187)
(.18
5)
4.70
13.0
0
13.1
06.
00
4.70
6.35 19.05
8.20Ø6.25
6.35
12.00 4.75
6.35
6.35
1 2 3
(.75
0)19
.05
19.0
5(.
750)4.70
(.18
5)
EPOXY
Ø3.00
Ø1.60(.062 DIA)
0.40(.015)(.050)
1.27
III II I
(.18
5)4.
70
(.75
0)19
.05
19.0
5(.
750)
6.35
6.35
4.75
6.35
Ø6.258.20
19.056.35
4.70
6.00
13.1
0
(.18
5)
(.187)
(.250)
(.250)
(.322)
(.250)
(.246 DIA)
(.118 DIA)24˚
(.23
6)(.
515)
(.750)(.250)
(.62
9)(.
204)
5.20
16.0
0
EPOXY
(.062 DIA)Ø1.60
321
Ø3.00
12.00(.472)
(.015)0.401.27
(.050)
III II I