5 One Year Limited TRIGGER TYME™ PISTOL BULLSEYE … · 2018-08-24 · D ® Laser Display Target...
Transcript of 5 One Year Limited TRIGGER TYME™ PISTOL BULLSEYE … · 2018-08-24 · D ® Laser Display Target...
Questions or Problems?Contact:
LASERLYTE928-649-3201
StopSign 4x4.indd 1 8/1/13 11:41 AM
Our Limited 3-‐year Warranty is only valid within the United States.
• LaserLyte offers a 3-‐year limited warranty. • If you find your product defective due to
manufacturers defect we will fix or replace the item at no charge.
• If your warranty expired you may still send it in to be repaired for a fee.
_________________________________________
TAMPERING WITH OR MODIFYING THE LASERLYTE PRODUCT IN ANYWAY, WILL VOID WARRANTY.
All returns must have a Return Authorization Number written clearly on the outside of the package. To obtain a Return Authorization Number please
call (928) 649-‐3201 and speak with Customer Service.
StopSign 4x4.indd 2 8/1/13 11:41 AM
1
1
2
3
TRIGGER TYME™ PISTOL
• This training pistol cannot be fired. Please respect all
• For use with the LaserLyte® LT-PRO Universal Laser Trainer
Instructions for use: Make the LT-PRO ready and insert into the barrel of the
Trigger Tyme™ Pistol. Pull the trigger to activate the laser. Ensure the LT-PRO
is snug in the barrel. Aim in a safe direction and shoot the laser at desired
targets.
LT-TT& LT-TTC
2
®
Reaction Tyme
3
®
Works great with LaserLyte targets.- Laser Target, TLB-1: 62 LEDs light up on target, showing the shots- Reaction Tyme, TLB-RT: 2 training modes, active reaction training
Reaction Tyme
Pistol Laser Trainer
Installation:
THE BATTERIES ARE ALREADY INSTALLED, YOU MUST REMOVE A PIECE OF PLASTIC INSULATOR BEFORE OPERATION
UNLOAD YOUR FIREARM! Remove plastic insulator from batteries. Insert screw through adapter and thread into taper of trainer. Tighten or loosen screw for caliber fit. Gently press the trainer into the muzzle of the pistol. Ready your pistol and pull trigger to fire red laser dot. (LaserLyte recommends the use of snap caps.) When removing from your pistol, pull straight out! Do not twist! Ensure all parts are out of barrel When not in use remove batteries and insert insulator for storage.
12
Batteries: (3) 377 Unscrew Battery cap. Remove batteries. Install new batteries. Tighten battery cap.
1
2
3
4
3
2
3
4
5
6
4
6
7
8
5
DANGER
LASER LIGHTAVOID DIRECT EYE EXPOSURE
POWER OUTPUT < 5mw WAVELENGTH 630-670mm
CLASS IIIa PRODUCT
®
A Division of P&L Industries 101 Airpark Road - Cottonwood, AZ 86326
Phone 928-649-3201 - Fax 928-649-3970 www.LaserLyte.com
LT-PRO
WARRANTY:One Year Limited
Warranty.
Training with the LT-PRO will improve: • Trigger Control
• Unsighted Fire / Point and Shoot
• Shooting from the Holster
• Precision Shooting
• Unorthodox Shooting Positions
STOP
Correct removal NO
NO
+ + +insulator
BULLSEYE TRAINING KIT
1
1
2
3
TRIGGER TYME™ PISTOL
• This training pistol cannot be fired. Please respect all
• For use with the LaserLyte® LT-PRO Universal Laser Trainer
Instructions for use: Make the LT-PRO ready and insert into the barrel of the
Trigger Tyme™ Pistol. Pull the trigger to activate the laser. Ensure the LT-PRO
is snug in the barrel. Aim in a safe direction and shoot the laser at desired
targets.
LT-TT& LT-TTC
2
®
Reaction Tyme
3
®
Works great with LaserLyte targets.- Laser Target, TLB-1: 62 LEDs light up on target, showing the shots- Reaction Tyme, TLB-RT: 2 training modes, active reaction training
Reaction Tyme
REV 0914
TLB-BEK
• THE SOUND ACTIVATED SWITCH IS ALWAYS LISTENING
• THE BATTERIES ARE ALREADY INSTALLED. YOU MUST REMOVE THE PLASTIC INSULATOR BEFORE OPERATION. SEE BATTERIES SECTION FOR INSTRUCTIONS.
Installation:* UNLOAD YOUR FIREARM!➊ Insert screw through adapter and thread into taper of trainer. Ensure LT Switching
Rubber & internal spring are in place.
➋ Tighten or loosen screw for caliber fit.
➌ Twist battery cap tightly to turn on. Tap to ensure it is on.
➍ Gently press the trainer into the muzzle of the pistol.
➎ Ready your pistol and pull trigger to fire red laser dot.
➏ When removing from your pistol, pull straight out! Do not twist! Ensure all parts are out of barrel.
+ + +
LT_PRO.indd 2 8/6/14 10:07 AM
+ + +
LT_PRO.indd 2 8/6/14 10:07 AM
Laser Trainer ProLT-PRO
LT-PRO Adapter Screw Hex Key
LT Switching Rubber
➊
➋ ➌
+ + +
LT_PRO.indd 2 8/6/14 10:07 AM
Use hex key to adjust caliber.
➍
➎
➏
➐
Correct removal NO
NO
When not in use: Twist battery cap slightly to turn off. Tap gently to ensure it is off.
+ + +
LT_PRO.indd 2 8/6/14 10:07 AM
Batteries: (3) 377➊ Unscrew Battery cap.
➋ Remove batteries.
➌ Install new batteries.
➍ Tighten battery cap to turn on. Tap to ensure it is on.
Remove & discard insulator before
initial use.
TLB_BEK.indd 1 5/12/15 11:05 AM
®
LaserTargetDisplay
OFF ON
Reset
TLB-1
G
DC
B
A
E
®
LaserTargetDisplay
OFFON
Reset TLB-1
®
LaserTargetDisplay
OFFON
Reset TLB-1
F
®
LaserTargetDisplay
OFF ON
Reset
TLB-1
G
DC
B
A
E
®
LaserTargetDisplay
OFFON
Reset TLB-1
®
LaserTargetDisplay
OFFON
Reset TLB-1
F
®
LaserTargetDisplay
OFF ON
Reset
TLB-1
G
DC
B
A
E
®
LaserTargetDisplay
OFFON
Reset TLB-1
®
LaserTargetDisplay
OFFON
Reset TLB-1
F
OFF ON
®
LaserTargetDisplay
OFF ON
Reset
TLB-1
Reset
®
Laser TargetDisplay
OFF ON
ResetTLB-1 OFF ON
®
LaserTargetDisplay Reset
x2
OFF ON
®
LaserTargetDisplay
OFF ON
Reset
TLB-1
Reset
®
Laser TargetDisplay
OFF ON
ResetTLB-1 OFF ON
®
LaserTargetDisplay Reset
x2
OFF ON
®
LaserTargetDisplay
OFF ON
Reset
TLB-1
Reset
®
Laser TargetDisplay
OFF ON
ResetTLB-1 OFF ON
®
LaserTargetDisplay Reset
x2
OFF ON
®
LaserTargetDisplay
OFF ON
Reset
TLB-1
Reset
®
Laser TargetDisplay
OFF ON
ResetTLB-1 OFF ON
®
LaserTargetDisplay Reset
x2
®
LaserTargetDisplay
OFF ON
Reset
TLB-1
G
DC
B
A
E
®
LaserTargetDisplay
OFFON
Reset TLB-1
®
LaserTargetDisplay
OFFON
Reset TLB-1
F
OFF ON
®
LaserTargetDisplay
OFF ON
Reset
TLB-1
Reset
®
Laser TargetDisplay
OFF ON
ResetTLB-1 OFF ON
®
LaserTargetDisplay Reset
x2
OFF ON
®
LaserTargetDisplay
OFF ON
Reset
TLB-1
Reset
®
Laser TargetDisplay
OFF ON
ResetTLB-1 OFF ON
®
LaserTargetDisplay Reset
x2
OFF ON
®
LaserTargetDisplay
OFF ON
Reset
TLB-1
Reset
®
Laser TargetDisplay
OFF ON
ResetTLB-1 OFF ON
®
LaserTargetDisplay Reset
x2
• This training pistol cannot be fired. Please respect all firearm safety rules and always point this in a safe direction.
• For use with the LaserLyte® LT-PRO Universal Laser Trainer
Instructions for use:➊ Make the LT-PRO ready and insert into the barrel of the Trigger Tyme™ Pistol.
➋ Pull the trigger to activate the laser. Ensure the LT-PRO is snug in the barrel. Aim in a safe direction and shoot the laser at desired targets.
Works great with all LaserLyte targetsTLB-1 Target Usage:➊ Position target facing shooter. Be sure the target is in
proper lighting conditiions. A strong light source may affect the TLB-1’s ability to register “hits”.
➋ Move switch to ON position.
➌ Fire laser at Reset Circle twice to activate target.
➍ With any LaserLyte® Laser Trainer fire the red laser dot in the target area.
To display your shot:
• Firing the red laser dot in the Display circle will illuminate your shots on the target.
To reset your shots:
• Firing the red laser dot at the Reset circle will clear the target. Turning the target OFF and then ON will also clear the target.
TLB-1 Components
A: On/Off Switch
B: Target Area
C: Display Circle
D: Reset Circle
E: Wall Hanger
F: Battery Compartment TLB-1 uses 3 - AA Batteries
G: DO NOT TOUCH THESE SCREWS
* Be sure the TLB-1 Laser Target is in proper lighting conditions. A strong light source may affect the TLB-1’s ability to register hits.
➊
➋
LASER TARGETTRIGGER TYME™ PISTOLLT-TT & LT-TTC
TLB-1
- TLB-1 Laser Target- TLB-XL Score Tyme™ Target
- TLB-RT Reaction Tyme™ Target- TLB-BWC Laser Plinking Cans
➌ ➍
➊
TLB_BEK.indd 2 5/12/15 11:05 AM