7/28/2019 5- Nemo Outdoor 5

1/18

Opening Window

You can also close this welcome window & then start with open work space

7/28/2019 5- Nemo Outdoor 5

2/18

Connect the device

To add the device-click Measurement-click Add New Device-abovewindows occurs add Phone, Scanner, GPS accordingly.

7/28/2019 5- Nemo Outdoor 5

3/18

Phone & Scanner Windows

Choose Phones from Phone List & Scanners according your work scope

7/28/2019 5- Nemo Outdoor 5

4/18

Phone & Scanner Windows

Choose Phones from Phone List & Scanners according your work scope

7/28/2019 5- Nemo Outdoor 5

5/18

Add map in work space

Right click in the middle of the window. Select Map New

7/28/2019 5- Nemo Outdoor 5

6/18

Map

7/28/2019 5- Nemo Outdoor 5

7/18

Add route

Right click in the middle of the window. Select Map New Click Layers on MapInfo MapX V4 Properties

7/28/2019 5- Nemo Outdoor 5

8/18

Add route

Choose Map Layers & Click Add

7/28/2019 5- Nemo Outdoor 5

9/18

Add BTS File

Click Add BTS File Choose BTS Files

7/28/2019 5- Nemo Outdoor 5

10/18

Add BTS File

On BTS Files Tick on Connected Devices

7/28/2019 5- Nemo Outdoor 5

11/18

Add BTS File

7/28/2019 5- Nemo Outdoor 5

12/18

Before implement SSO, the tools & equipment mustbe prepared first. The tools & equipment are :

Nemo Outdoor c/w Test Plan

Scanner set c/w GPS PC Tel UMTS EX 900/2100 2 set UE Nokia N85 1 nos Data Card TM7200

Tools & Equipment

7/28/2019 5- Nemo Outdoor 5

13/18

SSO Preparation

Before implement SSO, we must prepare and knowthe :

Map site (Location of the site)

BTS File The scrambling code (sector code) Path to be taken during mobility

7/28/2019 5- Nemo Outdoor 5

14/18

Drive Test

Single Site Optimization (SSO) is divided by two testwhich is :

Mobility

Static

7/28/2019 5- Nemo Outdoor 5

15/18

Test that must be done during Mobility is : Swap Verification Define swap sector Round 1 Short Call (60 sec duration in every 10 secidle), Long Call. Round 2 - HSDPA (KPIs value must be 1Mbps)

Note: Short Call(Lock 3G) & Long Call(Dual Mode, end call after ISHO success) UE to PSTN PSTN Test Number: Northern 0194011111, Central & Southern 0197011111 HSDPA (Lock 3G with 100Mb DL data)

Mobility

7/28/2019 5- Nemo Outdoor 5

16/18

Test that must be done during Static is : AMR Short (Voice Call) UE1 to UE2 VDT Short (Video Call) UE1 to UE2 HSDPAKPIs value must be 3Mbps HSUPA - KPIs value must be 1Mbps HSPA Ping RTT KPIs value must be 100ms

Note: AMR Short(Lock 3G), VDT Short(Lock 3G), HSDPA (Lock 3G with 30Mb DL data) & HSUPA(Lock 3G with 10Mb UL data) must be done 10 samples per sector HSPA Ping RTT must be done 100 samples per sector with ping 32 bytes

Static New Site

7/28/2019 5- Nemo Outdoor 5

17/18

Test that must be done during Static is : AMR Short (Voice Call) UE1 to UE2 VDT Short (Video Call) UE1 to UE2 SMS MMS HSDPAKPIs value must be 3Mbps HSUPA - KPIs value must be 1Mbps

Note: AMR Short (Lock to 3G), VDT Short (Lock 3G), & SMS must be done 3 samples per sector HSDPA(Lock 3G with 30Mb DL data) & HSUPA(Lock 3G with 10Mb UL data) must be done 1sample per sector with ping 32 bytes

Static Modernization

7/28/2019 5- Nemo Outdoor 5

18/18

Important The RSCP required is < -70 The EcNo required is < -7The HSDPA KPIs required > 1Mb (Mobility)The HSDPA KPIs required > 3Mb (Static)The HSUPA KPIs required > 1Mb Ping < 100ms Static sample must be 1o sampling Scanning Mode : Pilot Scanning Frequency channel W2100 is 10762, 10737 & 10712 Frequency channel W900 is 3012