5” Led module - acuitybrandslighting.com€¦ · L5r Remodel rough-in 5BL LdmW e PHC Poke-home...
2
Catalog Number Notes Type ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: 5BLMW LED DOWNLIGHTING 5BL-LED LED Recessed Downlighting 5BL 5” LED Module IC/Non-IC New Construction/Remodel/Retrofit FEATURES & SPECIFICATIONS INTENDED USE — Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. The LED module maintains at least 70% light output for 35,000 hours. CONSTRUCTION — Two-piece, die-cast heat sink for optimal thermal management. E26 socket adapter and hardwire kit ships standard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance. Twin torsion springs ensure easy installation. OPTICS — Lower white baffle splay recesses optical system into the ceiling to prevent glare and provide a traditional look. Utilizes 3000 K color temperature LEDs. ELECTRICAL SYSTEM — High-efficiency driver mounted on the module. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 15%. For compatible dimmers, refer to Compatible Dimmers Chart. Standard input wattage is 13 watts, 46 lumens per watt; equivalent to 65-watt incandescent. INSTALLATION — Suitable for installation in standard-height rough-in sections. For compatible housings, refer to Compatible Housings Chart. LISTINGS — CSA certified to US and Canadian safety standards. ENERGY STAR® qualified; California T24 compliant. Damp location listed. WSEC ASTM E283 for Air-Tight (with IC housings). WARRANTY — Five-year limited warranty. Full warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx. Note: Specifications subject to change without notice. All dimensions are inches (centimeters). Specifications Aperture: 5” (12.7) Ceiling opening: 5-1/2” (14) Overlap trim: 6-1/4” (15.9) Height: 5” (12.7) 5 (12.7) 6-1/4 (15.9) 5-1/2 (14.0) E26 Adapter Hardwire Kit ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: L5 5BLMW LED U 5BL MW LED Series/Reflector Finish Lamps/Lumens Color temperature Voltage 5BL 5” baffle LED module MW Matte white LED 600 lumens (blank) 3000 K (blank) 120V 5BLMW LED Series Reflector Options Packaging L5 New construction rough-in L5R Remodel rough-in 5BLMW LED PHC Poke-home wire connectors R6 Resale pack of six U Unit (non-stock) To order with housing:
Transcript of 5” Led module - acuitybrandslighting.com€¦ · L5r Remodel rough-in 5BL LdmW e PHC Poke-home...
Catalog Number
Notes
Type
Ordering infOrmatiOn For shortest lead times, configure products using bolded options. example: 5BLMW LED
Downlighting 5Bl-lED
Led recessed downlighting
5BL5” Led module
IC/Non-ICNew Construction/Remodel/Retrofit
features & specificatiOnsintended use — Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. The LED module maintains at least 70% light output for 35,000 hours. cOnstructiOn — Two-piece, die-cast heat sink for optimal thermal management. E26 socket adapter and hardwire kit ships standard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance.Twin torsion springs ensure easy installation.Optics — Lower white baffle splay recesses optical system into the ceiling to prevent glare and provide a traditional look.Utilizes 3000 K color temperature LEDs.
eLectricaL sYstem — High-efficiency driver mounted on the module. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing.
Dimming down to 15%. For compatible dimmers, refer to Compatible Dimmers Chart.
Standard input wattage is 13 watts, 46 lumens per watt; equivalent to 65-watt incandescent.
instaLLatiOn — Suitable for installation in standard-height rough-in sections. For compatible housings, refer to Compatible Housings Chart.Listings — CSA certified to US and Canadian safety standards. ENERGY STAR® qualified; California T24 compliant. Damp location listed. WSEC ASTM E283 for Air-Tight (with IC housings).WarrantY — Five-year limited warranty. Full warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.note: Specifications subject to change without notice.
All dimensions are inches (centimeters).
Specifications
Aperture: 5” (12.7)
Ceiling opening: 5-1/2” (14)
Overlap trim: 6-1/4” (15.9)
Height: 5” (12.7)
5(12.7)
6-1/4(15.9)
5-1/2(14.0)
e26 adapter Hardwire Kit
Ordering infOrmatiOn For shortest lead times, configure products using bolded options. example: L5 5BLMW LED U
5BL mW Led
series/reflector finish Lamps/Lumens color temperature Voltage
5BL 5” baffle LED module
mW Matte white Led 600 lumens (blank) 3000 K (blank) 120V
5BLmW Led
series reflector Options packaging
L5 New construction rough-inL5r Remodel rough-in
5BLmW Led PHC Poke-home wire connectors r6 Resale pack of sixU Unit (non-stock)
to order with housing:
5Bl-lED
Downlighting one lithonia way Conyers, gA 30012 Phone: 800.315-4935 Fax: 770.918.1209 www.lithonia.com © 2012 Acuity Brands, inc. All rights reserved. Rev. 04/17/12
L series 5” Led module - energY star®
energY data
energY data*
Lumens 600
Min. starting temp -18°C (0°F)
EMI/RFI FCC Title 47 CFR, Part 15, Class B
Sound rating Class A standards
Input voltage 120V
Min. power factor 0.80
Input frequency 50/60 Hz
Rated wattage 13W
Input power 13W
Input current 0.14A*Values at non-dimming line voltage.
0° 20°
40°
60°
80°
600
1200
1800
Ave Lumens05152535455565758590
191817619742715020165100
156264130351613510
Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°
90° - 180°0° - 180°
550.0585.0614.5621.40.0
621.4
88.594.198.9100.00.0
*100.0*Efficiency
%02fppc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910
11911210610095918784807775
1191101029691868279767370
119108999387837975726967
1161101049994908683807774
1161081019590868278757270
116106989287827875726967
1111061019692888582797674
111104989389858178757269
111103969186827875726967
RC
R
50% beam -28.3°
10% beam -50.6°
MountingHeight
Inital FCCenterBeam Diameter FC Diameter FC
8.010.012.014.016.0
63.434.121.314.510.5
2.83.84.85.86.8
31.717.010.67.35.3
5.27.19.010.912.8
6.33.42.11.51.1
5BLmW Led, 3000 K LEDs, 600 delivered lumens, 13.0 input watts (45 lpw), test no. LTL20619, tested in accordance with IESNA LM 79-08
pHOtOmetrics distribution curve distribution data Output data coefficient of utilization illuminance data at 30” above floor for a single Luminaire
notes • Actual wattage may differ by +/- 13% when operating at 120V +/- 10%.
