5 DAYSCERTIFIED CAT.II VIBRATION ANALYST TRAININGBasic Machinery Vibration ( BMV )

Course dates : ( Webinar )Certified Examination from Vibration Institute USA

Vibro Technologies & Engineering Pte Ltd

NO PROBLEM! ONLY SOLUTIONS

COURSE DETAILSCourse ObjectiveThis course prepares attendees to perform basicmachinery vibration analysis on industrial machineryusing single-channel measurements, with or withouttriggers signals, according to established and recognizedProcedures, It covers basics of sensors, database anddata collector setup, data collection, signal processing,fault analysis, and basics of single plane balancing

Who should attendTechnical personnels who involve in direct maintenance,troubleshooting of rotating machinery and want to enhanceknowledge in maintenance program with vibration

Course Topics1. Basics vibration concepts and terminology2. Use of electronic data collectors for monitoring and analysis3. Machine monitoring principles4. Selection and location of transducer5. Data acquisition for monitoring and analysis6. Fault and condition analysis7. Calculating machine frequencies8. Operating speed fault analysis9. Machine acceptance testing

Course Fees Course Fees - SGD 3000.00 per person per pax including fees and examination. All fees subject to 7% GST

Re-exam fees - SGD 900.00 per pax ( Including admin fees ) + 7% GST.

Payment is to be made upon enrolment. Course fees include course materials. Excludes VI membership/ surveillance fees or fees associated to vibration institute

Terms & conditions apply

CertificateAttendance certificate will be issued by Vibro. VI Certificatewill be issued to those who pass the examinationBenefits

Be certified as CAT.II Vibration Analyst from reputablevibration Institute USA. Being capable of defining routinedata collection activities including acquisition and analysis settingsusing basic signal analysis, collecting extra test points whenunusual conditions exist, performing single channel impacttests, interpreting and evaluating test results in accordance withspecifications and standards, diagnosing common faults.

Course Date19-23 Oct 2020

Mode Of Delivery

Exam DateScheduled 1 month after completion of course

Exam RequirementsMinimum CAT.I + 38 Training hours.At least 18 months of relevant experience inMachinery vibration or hold a technical degree

About the facilitator

Nick Kang is the Director/Entrepreneur of Vibro Technologiesand has more than 20 years experience in diagnostics/predictivebased maintenance. He is a certified vibration analyst category IIIin accordance to ISO 18436-2. He is also a certified SDT hatchcover inspector

COURSE ORGANIZED BY

Vibro Technologies & Engineering Pte Ltd60 Ubi Crescent #01-05 UBI Techpark Singapore 408569

For course registration, contact 6749 2426 or email : vibtech@vib-tech.com

Exam LocationVibro Training Center ( Singapore )60 Ubi Crescent #01-05 Ubi TechparkSingapore 408569

Zoom Webinar