(5) Click Open File and select the engraving file.
7
Transcript of (5) Click Open File and select the engraving file.
(5) Click "Open File" and select the engraving file.
(6) Select the engraving mode and click "Next". (If you want to engrave grayscale images, we
recommend you to select "Line To Line" or "1bit BW Di thering" mode; if you want to engrave
black and white images or cut, please select "Vectorize" mode)
(7) Select engraving parameters (parameter se ngs can refer to the engraving material
parameter chart).
(2) Select Serial/USB and press Next.
(3) Add device name and engraving range.
(4) Select Front Le as your Origin X,Y and acvate Auto “Home”, then press Next.(4) Select
Front Le as your Origin X,Y and acvate Auto “Home”, then press Next.
(5) Click Finish.
(6) Select "COMGO Z1 Laser Engraver" and click "OK".
