5. ALSTOM[1]
Transcript of 5. ALSTOM[1]
GRID
David PH NAPITUPULU8 Juni 2011
ALSTOM GRID – AUTOMATION
CONTROL SYSTEM PRODUCT
Presentation title - 15/03/2011 - P 2
Agenda
1st topic ALSTOM ALSTOM -- GRIDGRID Page 3
2nd topic AUTOMATION CONTROL SYSTEM PRODUCT Page 7
3rd topic EMP POWER APPLICATION TRANSMISSION Page 26
4th topic DMP POWER APPLICATION DISTRIBUTION Page 36
5th topic SUBSTATIONS RTU/BCU FOR UTILITY Page 50
7th topic REFERENCES Page 62
6th topic TELECOMMUNICATION FOR UTILITY Page 56
8th topic SOLUTION PROPOSED Page 66
Presentation title - 15/03/2011 - P 3
From AREVA T&D to ALSTOM GRID
ALSTOM− Marine
− Transport
− Power
− GRID
AREVA− Nuclear fuel front end
processing
− Nuclear reactors
− Nuclear fuel re-processing
− T&D
T&D : 86 industrial sites in the worldOver 26’000 employees on the five continents
Presentation title - 15/03/2011 - P 4
ALSTOM GRID Business
Transmission projectsTransmission projects Distribution systemsDistribution systems
HV switchgearHV switchgear MV productsMV productsPower transformersPower transformers
Energy Automation & Information( EAI )
Energy Automation & InformationEnergy Automation & Information( EAI ) ( EAI )
ServicesServices
Power conversionPower conversion
EAI : Provide control systems for all stages of power system operation
Presentation title - 15/03/2011 - P 5
Hierarchy of monitoring and control functions
HV / MVswitchgear Transformers
Protections Measurement
Substation Control SystemsDigital Control Systems
SCADA / EMS / DMS
MarketMgt
Telecom systems
Substation
Network
Market
Instrument Transformers Sensors
Automation
Presentation title - 15/03/2011 - P 6
Agenda
2nd topic AUTOMATION CONTROL SYSTEM PRODUCTAUTOMATION CONTROL SYSTEM PRODUCT Page 7
1st topic ALSTOM - GRID Page 3
3rd topic EMP POWER APPLICATION TRANSMISSION Page 26
4th topic DMP POWER APPLICATION DISTRIBUTION Page 36
5th topic SUBSTATIONS RTU/BCU FOR UTILITY Page 50
7th topic REFERENCES Page 62
6th topic TELECOMMUNICATION FOR UTILITY Page 56
8th topic SOLUTION PROPOSED Page 66
Presentation title - 15/03/2011 - P 7
Control Systems dedicated to the operation of electric power systemselectric power systems
Energy Automation and Information BusinessPower System Control Products
Presentation title - 15/03/2011 - P 8
POWER SYSTEM organization
HV customer
MV customeror MV / LV transformer
VHV customer
Transmission networkTransmission network
SubSub--transmission networktransmission network
Primary Primary distribution distribution
systemsystem
Distributionapplications
( DMP )
Generation&
transmissionapplications
( EMP )
Presentation title - 15/03/2011 - P 9
Power System Operation
Operate a power system = satisfy the demand at any time − With the required SECURITY
• No equipment overload ( current , voltage , power , ... )• Dynamic limitations ( thermal stress , water flows , ... )• Preventive maintenance requirements
− With the required SERVICE QUALITY• Continuity• Constant frequency• Satisfactory voltage level• Good voltage wave shape ( low harmonics )
− At the lowest possible OPERATING COST• Generation and startup costs• Operations and maintenance costs
Taking account of external forces ( poorly predictable )• Outages• Natural inflow• Weather• The DEMAND itself
GRID
Other control sites
Operators
Power systemapplications
( optional )
ReportsPC - Windows
SCADA
System monitoring and control context
Communication network
Supervisory ControlSupervisory Control Data AcquisitionData Acquisition
RTUIED
IED
IEDRTU
RTU PLC
DistributedSCADA
RTUIED
IED
PLCRTU
RTU RTU
DistributedSCADA
RTU
IEDRTU
RTU
PLC
HABITAT & Utilities
ee--terraterraplatformplatformFront-end
Presentation title - 15/03/2011 - P 11
NMS Products Portfolio
Subs
tatio
nan
d N
etw
ork
Telecommunication Network
Tele
com
MarketManagement
Systems
DistributionManagement
Systems
EMS
/ DM
S / M
MS
e-terramarkete-terrasettlementse-terracommite-terraplatforme-terracontrole-terracome-terrascadae-terrageneratione-terratransmissione-terraloadforecaste-terrasimulatore-terravisione-terradisgene-terrarenewableplane-terrasourcee-terradistribution
e-terragridcomNMS 5000SDH/ PDH e-DXC5000PDH DXC5000SDH MSE5000LMU 5000PLC 5000 / T390TP DIP 5000 / TPI
EnergyManagement
Systems
Network Substation
e-terrartu600
Remote control and Acquisition
MiCOM C264
Presentation title - 15/03/2011 - P 12
Alstom Grid Automation NMS Offeringe-terrartu600
Supervise yourDistribution network
Improve Quality of Service
Remote Terminal Unit
ethernetIEC 61850
Telecomproducts
SCADA
(SAS) Protection & S/S Automation
e-terramarket
e-terratransmissione-terradistributione-terrascada
Energy Management System
Market Management System
MiCOM C264
MiCOM Relays
PACiS
State estimator, Contingencies analysis, Load forecast, AGC, Safety Management, Dispatching Simulator,
Telecom System
Network coloring, Power Flow, FaultLocation & Restoration, Switching
management, Volt &VAR control, Trouble call system, Work orders,
GIS and AMR interface…
Improve the Transmission security of your grid.
Real time Balancing MarketDay ahead MarketTransmission Capacity ManagementSettlement
Dedicated Digital solutions for Power Line Carrier and TeleprotectionTelecommunication
Distribution Management System
e-terracontrol
e-terracontrol
e-terragridcom
e-terrartu600Substation SCADA
Presentation title - 15/03/2011 - P 13
T&D EAi Offering for Control Centers
• Traditional EAi Business : Large Control Centers for electrical Utilities
− e-terraplatform( = SCADA + EMP / DMP power applications) : typical system is about 100’000 points
− large catalog of electrical applications (G + T + D)− e-terra control (SMP) covers
• decentralized Front Ends for e-terraplatform• the smaller SCADA segment
• Dedicated teams and products for Telecom Engineering
Presentation title - 15/03/2011 - P 14
RTU RTU RTU
Substation
RTU RTU RTU
Substations
System Architecture Previous vision - centralized
NetworkGeneration
SCADA
Front End
Control Center
RTU RTU RTU
Substations
Dedicated telecom
Presentation title - 15/03/2011 - P 15
NetworkGeneration
SCADA
Control Centere-terraplatform
Wide Area Network
RTU RTU RTU
Substation
SCADA / Front End
RTU RTU RTU
Substation
SCADA / Front End
SMP = eTerracontrol
Emergency System
System Architecture EMP / DMP + SMP Front End - Decentralized
RTU RTU RTU
Substation
Distributed SCADAe-terra Control e-terra Control e-terra Control
Internet
e-terraBrowser
SCADA / Front Ende-terra Control
Presentation title - 15/03/2011 - P 16
Control Center e-terraplatform
T&D EAiControl architecture with e-terra
Modem
Modem
Remote Terminal Unit
Substation
Front Ende-terracontrol
3
Small Operations Center
e-terracontrolModem
Remote Terminal UnitModem
45
SCADADMS
1 Plant Interface / Gateway
e-terracontrol
IED
SubstationDCS
Equipment
e-terracontrol
2 Substation Data Server
IED
Ethernet or Serial
Presentation title - 15/03/2011 - P 17
EMP / DMPProduct Overview
• EMP = Full EMS solution
• DMP = Full DMS solution
• HABITAT is the core technology layer (UIMS, DBMS, SW utilities) common for EMP & DMP
• Large installed base:− HABITAT : > 1’300 licences− EMP / DMP : > 110 customers in more than 20 countries
• Consistent Product Support− Training Centers− Customer Services− 3 Users Group ( USA, Europe, Australasia )− “Tech Times” monthly bulletin− ESD ( Electronic Software Distribution)
• Consistent Product Strategy
» Common core and basic functionality
Presentation title - 15/03/2011 - P 18
AREVA T&D EAI technical strategy (1)
• Strong Product approach, with a common line of technology world wide
• Migration and Upgradeability across releases
• Operating System following to the trend of H/W and S/W (Windows )
• Support interoperability:− development environment & published APIs− standards ( protocols, CIM / XML data model, ... )− MS-Windows ( DDE, ActiveX controls, … )− ORACLE interface for historical data ( HIS = e-terra archive )
• Web-enabled solutions and architectures
Presentation title - 15/03/2011 - P 19
AREVA T&D EAI technical strategy (2)
• Reduced Cost of Ownership− high quality delivery− simplified installation and system management− productivity in modeling activities
• Industrial delivery model to shorten time schedule
• Integrated solution from Equipment to Central Markets
• Maintain worldwide leadership position and product differentiation
Presentation title - 15/03/2011 - P 20
Energy Automation and Information BusinessBuild your SCADA system with e-terrartu600 for SubstationsTransmission and Distribution Networks
Presentation title - 15/03/2011 - P 21
e-terrartu600 : Key Features and Benefits
Compact standard DIN 3U high racks (30TE to 84TE width), rugged metallic case
8 to 128 I/O in mono-rack configuration
High scalability with Multi-Rack for I/O expansion up to 10 000 I/O
Multi-processor & distributed architecture
Intelligent processor built-in DI, DO, AI cards for high performances
Ladder logic program
Interlock checking for control security
1ms time-stamping resolution for SOE
Heavy-duty contact relays for CB control
SBO (Select Before Operate) control
Plug/Unplug cards & connectors for easy integration and maintenance
Local/Remote control management
Multi Host (Control Centers) Communication with Standard IEC and DNP 3 Protocols
Communications interface with meters and protection IEDs
Direct CT/VT high accuracy measurements for transducer-less application.
Fault current detection capability
Integrated meter
Integrated GPRS radio modem
Presentation title - 15/03/2011 - P 22
4 sizes of Rack (30 T, 42T , 63T, 84T )
Presentation title - 15/03/2011 - P 23
Energy Automation and Information Business Power System Telecom ProductMission: build private infrastructure
Power Stations
Transmission Substations
Control CentresAdministrative Offices
Distribution Centres
Telecom Management Centre Video Conference Facilities
Presentation title - 15/03/2011 - P 24
Power System Telecom System Integration
Optical Fibre(OPGW, ADSS, Wrapped)Microwave RadioSDH technology
Optical FibrePDH MicrowavePower Line Carrier (PLC)UHF/VHF Radio Trunked/Cellular RadioAF Cable
PLC
TDM/TDMARadio
UHF/VHFRadio
AFCable
Low CapacityOptical Fibre
Low CapacityMicrowave
High CapacityMicrowave
High CapacityOptical Fibre
Backbone network
Access network
Presentation title - 15/03/2011 - P 25
Agenda
3rd topic EMP POWER APPLICATION TRANSMISSIONEMP POWER APPLICATION TRANSMISSION Page 26
1st topic ALSTOM - GRID Page 3
2nd topic AUTOMATION CONTROL SYSTEM PRODUCT Page 7
4th topic DMP POWER APPLICATION DISTRIBUTION Page 36
5th topic SUBSTATIONS RTU/BCU FOR UTILITY Page 50
7th topic REFERENCES Page 62
6th topic TELECOMMUNICATION FOR UTILITY Page 56
7th topic SOLUTION PROPOSED Page 66
Presentation title - 15/03/2011 - P 26
e-terra platformEMP
Platform of application software for the management of power transmission & generation systems
OPERATING SYSTEM
HABITATHABITAT utilities
APPLICATIONSOperations Training
GENERATION
NETWORK
SCADA
DataAcquisition
SupervisoryControl
DISPATCHERTRAINING
SIMULATOR
Presentation title - 15/03/2011 - P 27
SCADA• Process analogs,
status, accumulators
• Value replacement • Calculations• Limit checking• Historical data record.• Intersite data• Topology processing• Tagging• Controls• Load shedding NETWORK
OLNETSEQ Topology processing State estimation Monitored element processing Bus load model update Bus load forecasting Loss sensitivities Short-circuit analysis Contingency analysis Security enhancement Voltage / VAr dispatch Power flow Optimal power flow
GENERATION AGC Economic dispatch Reserve monitor AGC performance monitor Historic loss model update Production costing Transaction scheduling
Load forecasting Operations planning Study generation Transaction evaluation
RT dataTelemetered limits
RT dataSCADA limits
Gen.set-points
Loss sensitivities
Gen. sched. / status / part.fact. / costsInterchange transactions
Load forecast
Repl. val.
Generation limits
EMP on-line functions : SCADA / EMS
ControlAcquisition
Outage scheduler
Presentation title - 15/03/2011 - P 28
EMPFunctional Scope (1)
SCADA subsystem− Data acquisition:
• non proprietary environment (PC + serial boards)• multiple RTU protocols: IEC101&104, DNP3, proprietary protocols• Core data processing: POINTs, ANALOGs, COUNTs, calculated values,
quality flags, limits, AOR, SOE, ..• SCADA event logs, exception lists, alarms
− Controls (1,2,3 steps, DO, SBO, group, sequence , interlock, tagging)
− SCADA related functions : • Topology, Loadshed, Mapboard• Disturbance storage & analysis ( HDR )
− Can accommodate large systems ( 300’000 points )− Interfaces with external systems: ISD, ICCP, ELCOM
(“e-terraComm” / OAG)
Presentation title - 15/03/2011 - P 29
EMPFunctional Scope (2)
NETWORK subsystem:− Topology− State Estimation− Contingency Analysis− Short Circuit− Security Enhancement − Optimal Power Flow− Volt VAr Dispatch− Power flow− Real Time and Study modes
Presentation title - 15/03/2011 - P 30
EMPFunctional Scope (3)
GENERATION subsystem:− Automatic Generation Control− Reserve Monitor− Economic Dispatch− Transaction scheduling− Real Time and Study Modes
Operations Planning− Resource Scheduling & Commitment : RSC
(“ e-terraCommit ” )− Load Forecast
DTS subsystem ( “ e-terrasimulator “ )− Use the same database & displays as the EMS / DMS
ORACLE based Historical Information System : HIS ( “e-terra Archive” )
Presentation title - 15/03/2011 - P 31
e-terra platformEMP
Platform of application software for the management of power transmission & generation systems
OPERATING SYSTEM
HABITATHABITAT utilities
APPLICATIONSOperations Training
GENERATION
NETWORK
SCADA
DataAcquisition
SupervisoryControl
DISPATCHERTRAINING
SIMULATOR
Presentation title - 15/03/2011 - P 32
Training simulator : What is to be simulated ?
Simulation environment
SIM
EMSor
DMS
Instructor - specifies scenario- substitutes for other operators
Simulation software
Power System SimulatorDYNAMICSPWRFLOW
COM / RTU simulator
Externals - loads- events- other operators
Real world
EMS or DMS- SCADA- Power apps- User interface
Operator
Electric Power System- Generation- Transmission net.- Distribution feeders- Protections- Regulations- COM / RTU
Trainee
EMS or DMS replica- SCADA- Power apps- User interface
Presentation title - 15/03/2011 - P 33
Data serversData servers
Communication front-ends
Communication front-ends
EMP / DMP Example of hardware architecture
Historicaldata serverHistorical
data server
Operator stations
Time deviceTime device
GPS timeGPS time
RouterRouter
Trouble call& work order
server
Trouble call& work order
server
OPSserver OPS
server
Wall board or
video projection
WEB FG server
WEB FG server
Office LAN
Inter-center access server
Inter-center access server
OtherCCs
Developmentcomputer
DTS server
Developmentcomputer
DTS server
Hard copy devicesHard copy devices
RouterRouter
Presentation title - 15/03/2011 - P 34
Flexibility.Flexibility. The EMS / DMS can be of any size or complexity.
Open Design. Open Design. Communication with the PC world and with third party applications through published APIs.
WebWeb--enabled.enabled.
Reliability. Reliability. Field proven technology.
Broad Functional Scope. Broad Functional Scope. All aspects of Network Operation from LV Customers, Generation Control, to MV and HV network analysis in a fully integrated yet modular package
Investment Protection. Investment Protection. EMP / EMP / DMP can be incrementally extended and / or enhanced through custom applications, new product releases, and AREVA add-on products.
Strong, longStrong, long--term relationships.term relationships. As a consistently maintained product with a well supported migration strategy, EMP / DMP supports strong, and long-lasting customer / supplier relationships.
EMP / DMP Advantages
Presentation title - 15/03/2011 - P 35
Agenda
4th topic DMP POWER APPLICATION DISTRIBUTIONDMP POWER APPLICATION DISTRIBUTION Page 36
1st topic ALSTOM - GRID Page 3
2nd topic AUTOMATION CONTROL SYSTEM PRODUCT Page 7
3rd topic EMP POWER APPLICATION TRANSMISSION Page 26
5th topic SUBSTATIONS RTU/BCU FOR UTILITY Page 50
7th topic REFERENCES Page 62
6th topic TELECOMMUNICATION FOR UTILITY Page 56
7th topic REFERENCES Page 66
GRID
Distribution Management PlatformDMP
Based on the same technology as EMP
Platform of application software for the management of distribution systems
OPERATING SYSTEM
HABITAT®HABITAT utilities
APPLICATIONSOperations Training
OPERATIONSUPPORT
DISTRIBUTIONNETWORKANALYSIS
AND OPTIMIZATION
SCADA
DataAcquisition
SupervisoryControl
DISPATCHERTRAINING
SIMULATOR
Presentation title - 15/03/2011 - P 37
DMPFunctional Scope overview
• DMP = Same SCADA + DTS as EMP + Distribution oriented applications
• SCADA related functions
• Radial topology• Temporary modifications • Volt VAr Control • Load shedding• Sequence switching
• NETWORK analysis and optimization
• Real-Time & Study Power flow with radial constraints• Radial Network Reconfiguration
• Operation Support
• Trouble Call & Outage Management• Work Orders Management
• Automatic generation of schematic one-line displays
Presentation title - 15/03/2011 - P 38
DMPSCADA related functions
• Radial topology • Downstream of specified links• Feeder identification (recognize upstream / downstream
relationships)• Feeder coloring• Circuit tracing• Mesh detection
• Temporary Modification Management• Line CUT (special mark on display)• Line grounding (special mark on display)• Switch bypass (considered closed whatever its actual state)• Switch withdrawal (does not affect topology anymore)
Presentation title - 15/03/2011 - P 39
DMPSCADA related functions
• Volt VAr Control : VVC− Regulation exercised at the control room− Use designated transformers and capacitors in a primary
substation− First objective is to maintain voltage at a specified node− Second objective is to minimize MVAr flow through transformers− Target voltage can be made dependent on the load level
• Load Shedding ( Preventive )− Manual tripping of selected feeders− Automatic tripping of feeder up to reaching operator specified
MW• in a user selected group of loads• by Priority or Round Robin
− Multi-Site capability : Overseer or Participant
Presentation title - 15/03/2011 - P 40
DMPSCADA related functions
• Sequence Switching Management− TRIP, CLOSE, RAISE, LOWER, and SETPOINT commands− Sequence creation by Point & Click− Time delay between control issuance− Automatic / Step-by-Step Execution− Pause on impossibility to implement control
Presentation title - 15/03/2011 - P 41
DMPRadial network analysis and optimization
Real-Time & Study Power flow with radial constraints− State estimator (real-time load flow)
• Load model provides necessary pseudo-measurements• Line flow measurements in a radial subnetwork are used to rescale
the loads pseudo-measurements downstream of the measured flow− Study load flow
• Full Jacobian Newton-Raphson for robustness even for widely differing R / X ratios
• In addition to usual load flow data, user can specify line flows for rescaling of downstream loads
Presentation title - 15/03/2011 - P 42
DMPRadial network analysis and optimization
Radial network Reconfiguration − Manually specified normal topology− Optimal Switching ( OSW ) :
• Examine switching possibilities in the feeders of designated primary substations so as to improve user specified criteria
• Criteria : Margin, Voltage, Reliability− Fault Detection Isolation & Restoration ( FDIR ) :
• Use information provided by fault detectors or manually entered to locate the fault
• Identify switches to open to isolate the faulty area• Restore the upstream part• Identify switching plans to restore load downstream of faulty
subtree
Presentation title - 15/03/2011 - P 43
DMPTrouble Call & Outage Management
T C ST C S
D M SD M S
Controls Data Acquisition
C I SCall Callback
Low VoltageMaintenance
Crews
Customers
Phone operators&
Analysts
Billing infoLV connectivityCall handling
Problemanalysis
& dispatch End of task
Task assignment
Medium VoltageNetwork
PotentialMV Network
problems
Investigationresults
& known outages
Presentation title - 15/03/2011 - P 44
DMPTrouble Call & Outage Management
• Electronic Management of Customer Calls & Outages
• Improve Quality of Service and Customer Satisfaction
• Detect and solve network problems as quickly as possible
• Automatically group related calls according to real-time topology
• Consolidate outage information from all sources, including DMS SCADA
• Manage scheduled outages
• Provide general access to current outage situation ( Web-enabled )
• Track actual outage duration and repair time
• Statistics and reporting, Indexes on quality of service
Presentation title - 15/03/2011 - P 45
DMPWork Orders Management
WORK ORDERSserver
WORK ORDERSserver
D M SD M S
Operationsplanning
departmentWork crews
Safety personnel
MV network
StatusControls
Remote controlsTags Outages
OperationManager
Resourcescheduling
Work Orders clients
Presentation title - 15/03/2011 - P 46
DMPWork Orders Management
• Electronic Management of Maintenance, Construction and EmergencyWorks
• Enforce Safety Rules
• Standardize and accelerate the job life cycle
• Optimize allocation of resources
• Simulate execution of the tasks, analyze network reconfiguration
• Coordinate automatically with the DMS (including FDIR & OSW)
• Allow all people involved to monitor progress of work. Web-enabled
• Track actual work time, duration, assignments
• Statistics and reporting
Presentation title - 15/03/2011 - P 47
Data serversData serversControl RoomUser InterfaceControl RoomUser Interface
Inter-site / WAN Access ServersInter-site / WAN Access Servers
Communication Front-Ends
Communication Front-Ends
Trouble Call clients
Trouble Call clients Work Order
clientsWork Order
clients
Peripheral& Web Servers
Peripheral& Web Servers
PBX, CTI & Trouble Call serversPBX, CTI & Trouble Call servers Work Ordersserver
Work Ordersserver
DTS &developmentserver
DTS &developmentserver
DMPTypical Hardware architecture
Web(to RTUs)(to RTUs)
Presentation title - 15/03/2011 - P 48
DMP Advantages(according to a customer)
• Proven combination of DMS and VRS(Voice Response System)
• Automatic generation of operation schematic one-lines
• Good interface with GIS ( Geographic Information System)
• Several key applications for operators, such as − FDIR (Fault Restoration)− TCS (Trouble Call System / Outage Management)− WOM (Work Orders management)
• WEB enabled
• Easy to work with
• Proven record of on-time / fast track deliveries
Presentation title - 15/03/2011 - P 49
Agenda
5th topic SUBSTATIONS RTU/BCU FOR UTILITYSUBSTATIONS RTU/BCU FOR UTILITY Page 50
1st topic ALSTOM - GRID Page 3
2nd topic AUTOMATION CONTROL SYSTEM PRODUCT Page 7
3rd topic EMP POWER APPLICATION TRANSMISSION Page 26
4th topic DMP POWER APPLICATION DISTRIBUTION Page 36
7th topic REFERENCES Page 62
6th topic TELECOMMUNICATION FOR UTILITY Page 56
8th topic SOLUTION PROPOSED Page 66
Presentation title - 15/03/2011 - P 50
e-terrartu600 : > 25 types of cards
(4)
5A CT +
(4) VT
(4)
1A CT +
(4) VT
Power Meter(3s)
Batt = 2x12V 7,2 AH
(6) (8) 300V VT
Option+/- 10mA+/-10V0-20mA
(6)(8) 7V VT
(4)
+/- 10V
(4)
+/-5V
(8 )DO
(3)
5A CT +
(3) VT
(4) 300V VT
(4)
5A CT +FCD
(4)
4-20 mA
(4)
4-20
mA
(5)DOH(8) DI 125V
85-265 VAC/DC
85 – 265 VAC/DC
GPRS(3)
1A CT +
(3) VT
(8) Pulse Count.Accu.
(4) 7V VT
(4)
1A CT +FCD
(4)
+/-1mA
(4)
+/- 1
mA
(4)DOH + 1 select
(8) DI 24-48V
19-60 VDC
Charger
(2 s)
COM
(1 s)
ACPM
(3 s)
ACC
(1 s)
ACV
(1 s)
ACI
(1 s)
AO
(1 s)
AI
(1 s)
DO
(1 s)
DI
(1 s)
P/S
Presentation title - 15/03/2011 - P 51
Cards front panels examples
Presentation title - 15/03/2011 - P 52
Pole mounted : cubicle integration example
Presentation title - 15/03/2011 - P 53
Installation at TPC . From HV susbstation to pole mounted
GIS 160KV/60KV 32KV /11KV
One base rack per feeder integrated with protection
Presentation title - 15/03/2011 - P 54
Installation at TPC . From HV susbstation to pole mounted
Aerial 11KV
Pole mounted Switch & RTU
GPRS
Underground 11KV
RMU (4Ways Switch & CB)
Optical fiber (ring)
Presentation title - 15/03/2011 - P 55
Agenda
6th topic TELECOMMUNICATION FOR UTILITYTELECOMMUNICATION FOR UTILITY Page 56
1st topic ALSTOM - GRID Page 3
2nd topic AUTOMATION CONTROL SYSTEM PRODUCT Page 7
3rd topic EMP POWER APPLICATION TRANSMISSION Page 26
4th topic DMP POWER APPLICATION DISTRIBUTION Page 36
7th topic REFERENCES Page 62
5th topic SUBSTATIONS RTU/BCU FOR UTILITY Page 50
8th topic SOLUTION PROPOSED Page 66
Presentation title - 15/03/2011 - P 56
LINE TRAP
H.V.TRANSPORTNETWORK
TeleprotectionTA 314 Alspa PLC 1790
Power Line Carrier
FAX
SCADARTU
Terminating setAlspa TS 313
P.C.
EAI Telecom Product Range
COUPLING CAPACITOR
ProtectionMICOM
Line Matchingunit
Presentation title - 15/03/2011 - P 57
EAI Telecom Product Range
LINE TRAP
H.V.TRANSPORTNETWORK
Services
Controlcommand
orSCADA
Services
Power Line CarrierPLC 5000
Line Matching UnitLMU 5000
Management system
SPV 5000
Presentation title - 15/03/2011 - P 58
EAI Telecom Product Range
Digital TeleprotectionDIP 5000
Services
Cubicle
Controlcommand
orSCADA
H.V.TRANSPORTNETWORK
MUX
Optical link
Electrical link
OCM 5000
Management system
SPV 5000
OPGW
Presentation title - 15/03/2011 - P 59
EAI Telecom Product Portfolio
PLC1790Analogue PLC
PLC5000New digital PLC
TA 314Analogue teleprotection
DIP5000Universal teleprotection
Available
March 2004
Available
Available
LMU5000Line Matching Unit Available
• up to 80W• up to 4 RS232 Interfaces
• Data V11 Interface 64Kbps• 1 LAN Port, SNMP mngement
• up to 5 speech channels • Teleprotection (up to 4 cmds)
• Up to 4 commands • 4 wire analogue interface
•Up to 8 commands•Optical (1310,1550) interface•V11, G703 electrical interface
•Analogue interface (March 2004)
• Universal line matching unit
• up to 40W • up to 2 speech channels
• 4 wire data interface• Integrated modem
OCM5000Optical <-> electrical Available • 1 V11 or V24 interface
• 1 optical interface
Presentation title - 15/03/2011 - P 60
Substations, Power Stations
Control Center
DMS MMSEMSSCADA
Information Technology, Communications Tools
UPS
Civil Works
ControlRooms
RTUsDCS
ProcessInterface 48V DC
Telecommunications Network•Fiber Optic•Digital Microwaves•Pilot Cable•Power Line Carrier•Teleprotections•Telephone Network•Telecoms Management System
•Design•Engineering•Hardware•Software•Installation•Commissioning•Training•Maintenance•Product update
Energy Automation & Information Energy Automation & Information We take full responsibility in We take full responsibility in TurnTurn--Key ProjectsKey Projects
Presentation title - 15/03/2011 - P 61
Agenda
7th topic REFERENCESREFERENCES Page 62
1st topic ALSTOM - GRID Page 3
2nd topic AUTOMATION CONTROL SYSTEM PRODUCT Page 7
3rd topic EMP POWER APPLICATION TRANSMISSION Page 26
4th topic DMP POWER APPLICATION DISTRIBUTION Page 36
6th topic TELECOMMUNICATION FOR UTILITY Page 56
5th topic SUBSTATIONS RTU/BCU FOR UTILITY Page 50
8th topic SOLUTION PROPOSED Page 66
Presentation title - 15/03/2011 - P 62
EAI North American Market Share
25% Market Share
SCADA / EMS Systems− 48% of the top 40 Investor Owned Utilities− 20% of the top 176 control areas− Over 40% of all US generation
RTO / ISO / Transco− 7 out of 10
Gencos− 12 systems
Presentation title - 15/03/2011 - P 63
A fast growing installed base of e-terraplatform customers
EAI Major EMS / DMS / MMS Recent Referencesin Europe
Greece - 3 EMS
Ireland – ESB – EMS – MMS
Hungary – Central Market MAVIR
Romania – Central Market OPCOM
Romania – EMS
France – RTE Syga – Balancing Market
Ukraine – EMS and Market Iceland – Landsvirkjun – NCC – EMS Belgium – ELIA – Settlement Netherlands – ENECO – DMS Netherlands – TZH – EMS
Netherlands – NUON – DMS
Netherlands – REMU – EMS
Presentation title - 15/03/2011 - P 64
EAI other recent referencesAfrica / Middle East
► Sharjah - NCC - EMS
► Kuwait - Jahra DCC - DMS
► Libya - NCC & Tripoli EMS
► Syria - NCC - EMS
► Bahrain EMS / DMS / WMS
► Ivory Coast - CIE – EMS / DMS
► Mali Manantali East - EMS
► Mauritius NCC - SCADA
► Algeria – BCC Oran - DMS
► IRAN – Teheran - TREC EMS
South America
► Brazil - ONS - 3 EMS
► Peru - ETECEN - EMS
► Brazil - Electrometropolitana - EMS
Asia
► India North - 33 Centers - EMS
► India North East- 9 Centers - EMS
► India East - 16 Centers - EMS
► Indonesia - U. Pandang – EMS / DMS
► Thailand - MEA - EMS
► Vietnam PC3 - EMS
► Philippines - MMS
A fast growing installed base of e-terraplatform customers
Presentation title - 15/03/2011 - P 65
Agenda
7th topic REFERENCESREFERENCES Page 62
1st topic ALSTOM - GRID Page 3
2nd topic AUTOMATION CONTROL SYSTEM PRODUCT Page 7
3rd topic EMP POWER APPLICATION TRANSMISSION Page 26
4th topic DMP POWER APPLICATION DISTRIBUTION Page 36
6th topic TELECOMMUNICATION FOR UTILITY Page 56
5th topic SUBSTATIONS RTU/BCU FOR UTILITY Page 50
8th topic SOLUTION PROPOSED Page 66
Presentation title - 15/03/2011 - P 66
BEKASI POWERAdvantages New Control Centre Architecture
Advantages
- Higher availability- Increase performance (comprehensive A & R)- Standard SCADA Database- Richer view and extendable to IDMS *)- Open system, strong local support **)- Could be integrated w/ GIS easily ***)
SAIDI / SAIFI could be implemented, because the system is integrated.
- Good and sufficient for next develop’t- Continues acquisition real time data
- Having more I/O for the extension i.e. Aux- Safety for check oper. & maint. on interface- Operation Check & Maintenance on RTU- Standard Safety for SCADA oper. & maint.
“ The system is follow to PLN Pola SCADA to reach the standard operation performance (KPI) ”
» NEW SYSTEM OFFERED Control Center – e-terracontrol Redundant SCADA Server & Networking Integrated System / HMI for S/S & Branch CIM/XML Standar SCADA Database Enhanced Application & HMI *) SCADA standard protocol comm. SW **) Vector based graphical ***)
Telecommunication Telecom. Optic Telecom. Radio 400 MHz
Substation (Gardu Induk) With RTU Concentrator Added Supervisory Interface Access Protec’n Digital through RTU Added Limit Access (Local/Remote) sw.
Presentation title - 15/03/2011 - P 67
BEKASI POWEROther Advantages New Control Centre Architecture
Strong Point of e-terracontrol Architecture System Flexible architecture with human friendly configurator “Process Starter” for docking /
undocking the application required Flexible WEB base User Interface Application & Automatic Tabular Data, will rich the
displays Have many standard modules for Interfacing to Field Devices & External System Have user friendly CIM standard SCADA DB and Display Builder based on multi layer
graphic Providing the interface point entry for the self development program Builder simulator Comprehensive on-line help for the users
Default SCADA User Interface Application Persistent analog, status, and accumulator measurements Scaling and dead banding Limit checking and data quality Multiple step control analogue and digital Alarm and event processing Trending of historical information Monitoring of SCADA internal peripheral status
Presentation title - 15/03/2011 - P 68
BEKASI POWEROther Advantages: Process Starter
Presentation title - 15/03/2011 - P 69
BEKASI POWEROther Advantages: User Interface & Applications
Presentation title - 15/03/2011 - P 70
BEKASI POWEROther Advantages: Interf. Module for Field Dev. & Ext. Sys.
Presentation title - 15/03/2011 - P 71
BEKASI POWEROther Advantages: SCADA DB & GRAPHICAL BUILDER
Presentation title - 15/03/2011 - P 72
BEKASI POWEROther Advantages: Customer‘s self application integration
Presentation title - 15/03/2011 - P 73
BEKASI POWEROther Advantages: Simulator Builder
Presentation title - 15/03/2011 - P 74
BEKASI POWEROther Advantages: On Line - Help
Presentation title - 15/03/2011 - P 75
BEKASI POWEROther Advantages: Measurement History & Event Viewer
Presentation title - 15/03/2011 - P 76
BEKASI POWEROther Advantages: Trending Recorder
Presentation title - 15/03/2011 - P 77
BEKASI POWEROther Advantages: Internal SCADA Peripheral Status
Presentation title - 15/03/2011 - P 78
BEKASI POWEROther Advantages: Remote Maintenance Equipment
Telecommunication – Radio Data 400 MHz To have the continues acquisition of real time data
Substation (Gardu Induk) – RTU MiCOM C264 & MDF system To improve the safety for operation and maintenance Following to the standard Pola SCADA PLN, get more detail information from site Remote diagnosis & maintenance to decrease the downtime during maintenance
a9RemoteRemote
Diagnose.Diagnose.
a7RemoteRemote
SetupSetup
a8RemoteRemote
Maint.Maint.
Presentation title - 15/03/2011 - P 79
BEKASI POWERStep Upgrade to New Control Centre Architecture
» SCOPE OF WORK Control CenterSCADA Master Station with the redundant server and network Two console HMI and Master Station environment
Telecommunication SystemRouting Data Path of FO & Radio Communication Monitoring of Telecommunication Equipment
Main Substation / Switching Substation and Pole MountedAdvanced Remote Equipment with remote maintenance facilityInterfacing method on Substation using the RTU as pola SCADA PLN and
Supervisory Interface as well
Presentation title - 15/03/2011 - P 80
BEKASI POWERControl Centre Architecture
New Architecture Plan
RTU MiCOM C264 + Radio ModemObjectives:» Safety operation» Flexible to follow Pola SCADA design» open system for common use IED comm.» continues real time data
SCADA AREVA E-terracontrol
Objectives:» extendable to DMS system» open system w/ various choices of protocol comm.» complete w/ historical system» continues real time data» larger data sizing» single system for overall distribution network
4
Hardwired I/O
3
1
2
WAN
5
IEC 104
Modbus RTU / DNP 3.0
Presentation title - 15/03/2011 - P 81
BEKASI POWERControl Centre Architecture
New Architecture Plan
RTU MiCOM C264 + Radio ModemObjectives:» Safety operation» Flexible to follow Pola SCADA design» open system for common use IED comm.» continues real time data
SCADA AREVA E-terracontrol
Objectives:» extendable to DMS system» open system w/ various choices of protocol comm.» complete w/ historical system» continues real time data» larger data sizing» single system for overall distribution network
6
Hardwired I/O
3
1
2
WAN
5
IEC 104
Automation Network
www.alstom.com
T H A N K Y O U