4x4 Accessories INSTALLATION INSTRUCTIONS1 2 3 Ensure there is a clearance gap of between 5-10mm...
Transcript of 4x4 Accessories INSTALLATION INSTRUCTIONS1 2 3 Ensure there is a clearance gap of between 5-10mm...
![Page 1: 4x4 Accessories INSTALLATION INSTRUCTIONS1 2 3 Ensure there is a clearance gap of between 5-10mm from the handle to the tailgate. Centre the frame in the middle of the tub allowing](https://reader034.fdocuments.in/reader034/viewer/2022052008/601cb1a3819c6079ef3f5c7a/html5/thumbnails/1.jpg)
D
INSTALLATION INSTRUCTIONS
K
E
B CA
1X
4X
16X 16X 16X 20X
4X 2X 2X 2X 4X 4X
1X 4X
L
F
M
G
N
H I J
Unlock your vehicles potential
4x4 Accessories
![Page 2: 4x4 Accessories INSTALLATION INSTRUCTIONS1 2 3 Ensure there is a clearance gap of between 5-10mm from the handle to the tailgate. Centre the frame in the middle of the tub allowing](https://reader034.fdocuments.in/reader034/viewer/2022052008/601cb1a3819c6079ef3f5c7a/html5/thumbnails/2.jpg)
1
2
3
Ensure there is a clearance gap of between 5-10mm from the handle to the tailgate.
Centre the frame in the middle of the tub allowing even gaps between wheel arches.
Mark and pick relevant drill holes.
even gaps
even gaps
![Page 3: 4x4 Accessories INSTALLATION INSTRUCTIONS1 2 3 Ensure there is a clearance gap of between 5-10mm from the handle to the tailgate. Centre the frame in the middle of the tub allowing](https://reader034.fdocuments.in/reader034/viewer/2022052008/601cb1a3819c6079ef3f5c7a/html5/thumbnails/3.jpg)
4
5
+ ANTI-CORROSION
CAUTION: Before drilling, check to
ensure no important or hazardous items
are positioned beneath the drill points such as spare tyre, fuel lines/
tank or wiring.
!
D D DD GG HH
J
J
J
JI
I
I
I
E or F
E or F
E or F
E or F
Ensure the spacers are placed underneath the frame. Pick relevant spacer according to fitting.
![Page 4: 4x4 Accessories INSTALLATION INSTRUCTIONS1 2 3 Ensure there is a clearance gap of between 5-10mm from the handle to the tailgate. Centre the frame in the middle of the tub allowing](https://reader034.fdocuments.in/reader034/viewer/2022052008/601cb1a3819c6079ef3f5c7a/html5/thumbnails/4.jpg)
6
7
M
M
L
L
K
K
K
K KK
K
L
L LL
L
MM
M
M
M
Ensure side-rails are placed underneath the platform.
*REPEAT THIS PROCESS FOR THE FRONT PLATFORM.
![Page 5: 4x4 Accessories INSTALLATION INSTRUCTIONS1 2 3 Ensure there is a clearance gap of between 5-10mm from the handle to the tailgate. Centre the frame in the middle of the tub allowing](https://reader034.fdocuments.in/reader034/viewer/2022052008/601cb1a3819c6079ef3f5c7a/html5/thumbnails/5.jpg)
8
9
N
* Add pilot holes to frame before fastening screws.
Centre the both platforms on the frame and ensure all gaps are even.
![Page 6: 4x4 Accessories INSTALLATION INSTRUCTIONS1 2 3 Ensure there is a clearance gap of between 5-10mm from the handle to the tailgate. Centre the frame in the middle of the tub allowing](https://reader034.fdocuments.in/reader034/viewer/2022052008/601cb1a3819c6079ef3f5c7a/html5/thumbnails/6.jpg)
MAINTENANCE• Keep the vehicle tub clear of dirt and debris
ensuring the smooth operation of the Load Slide.
• Regularly clean the roller track with a clean cloth for smooth operation.
Serial No:0001
DO “NOT” OVERTIGHTEN TIE DOWN STRAPS
EVENLY DISPERSED
LOAD
MAX LOAD
MECHANICALHAZARD
NO STANDING ON PLATFORM
ENSURE
LOAD IS SECURE
HSP UTE LIDS PTY LTD
40 Overseas Drive, Noble Park North, Victoria, 3174
(03) 9795 8206
Unlock your vehicles potential
4x4 Accessories