The 4th International Conference onPulping, Papermaking and

Biotechnology

November 7-9, 2012Nanjing, China

TECHNICAL PROGRAM(Oral and Poster Presentations)

Sponsored and Organized byJiangsu Provincial Key Lab of Pulp & Paper Science & Technology, Nanjing Forestry University, China

Co-sponsored byThe University of Tokyo, JapanNorth Carolina State University, USAChina Technical Association of Paper Industry (CTAPI), ChinaTechnical Association of Pulp and Paper Industry (TAPPI), USAJapan Technical Association of Pulp and Paper Industry (JTAPPI), JapanJiangsu Technical Association of Paper Industry, China

Supported byNational Natural Science Foundation of China (NSFC), China

General Conference Information

1. Registration

Date Time Place

Nov. 6, Tue 09:00-24:00 Jinling Star Metropole Hotel

Nov. 7, Wed 08:00-12:00 Jinling Star Metropole Hotel

2. Time Table

Date Item Time Place

Wednesday

Nov. 7

Breakfast The hotel where you are staying

Lunch 12:00-13:30 Conference venue

Welcome Dinner 18:30-20:00 Jinling Star Metropole Hotel

Symposium08:30-12:00 Campus

13:30-18:00 Campus

Thursday

Nov. 8

Breakfast The hotel you are staying

Lunch 12:30-14:00 Conference venue

Dinner 18:30-20:00 Jinling Star Metropole Hotel

Symposium08:30-12:30 Campus

14:00-18:30 Campus

Friday

Nov. 9

Breakfast The hotel you are staying

Lunch 12:30-13:45 Conference venue

Conference

Banquet18:30-20:00 Jinling Star Metropole Hotel

Symposium 08:30-12:30 Campus

Poster Session 13:45-16:45 Campus

Closing Ceremony 16:45-18:00 Campus

Nov. 7th, 2012, Wednesday Morning Activities

Main Seminar HallOpening Ceremony, Presided by Prof. Zhongzheng Li

08:30-08:40 Welcome remarks by Prof. Fuliang Cao, President of Nanjing Forestry University08:40-08:50 Remarks by representative from Japan08:50-09:00 Remarks by representative from USA09:00-09:10 Remarks by representative from China

Main Seminar HallKeynote Lecture, Chaired by Prof. Yuji Matsumoto

09:10-10:00 Where and how will paper be made in the future? by Richard B. Phillips, North Carolina State University, USA

10:00-10:20 Coffee/tea breakMain Seminar HallKeynote Lecture, Chaired by Prof. Huamin Zhai

10:20-11:10For the better understanding of quantitative relationships between chemical structure and reactivity of lignin by Yuji Matsumoto, The University of Tokyo, Japan

11:10-12:00 Development of molecular tools for better wood production by Laigeng Li, Shanghai Institutes for Biological Sciences, Chinese Academy of Sciences, China

12:00-13:30 Lunch

Nov. 7th, 2012, Wednesday Afternoon 1st Sessions

Room A (Session 1)Lignin & Extractives (I)Chair: Thomas Rosenau

Room B (Session 2)Paper (I)Chair: Michael Sun

Room C (Session 3)Bioenergy (I)Chair: Yonghao Ni

Room D (Session 4)Wood Biotechnology (I)Chair: Tongming Yin

13:30-14:10(Invited Speaker)

The characteristics of acid-labile aryl ether units in wood ligninXing-Ping Guo, and Yuan-Zong Lai

Improvement of paperboard malleability by application of hydroforming processesPaul-Philipp Post, Dominik Huttel, Dipl.-Wirtsch. Peter Groche, and Samuel Schabel

Techno-economic analysis of the optimum lignin content from kraft pulping for the production of bioethanol Shufang Wu, Hasan Jameel, Hou-min Chang, and Richard Phillips

The regulatory network for meristem maintenance and differentiation in plantWei Guo, Yao Jiang, Hong-Ying Li, Jun Chen, Shu-Tang Zhao, and Meng-Zhu Lu

14:10-14:40

Side chain oxidation of non-phenolic β-O-4 type lignin model compounds with active oxygen species under oxygen bleaching conditionsSatoshi Ohmura, Tomoya Yokoyama, and Yuji Matsumoto

Analysis of auxiliary heating of thermal roll by electromagnetic inductionShulei Zhao, Xiaotian Ding, Zhengyuan Wei

Hydrothermal treatment of Tamarix ramosissima: Evaluation of the process as conversion method in a biorefinery conceptLing-Ping Xiao, Zheng-Jun Shi, Feng Xu, and Run-Cang Sun

The complicated process for cellulose and hemicellulose biosynthesisBaocai Zhang, and Yihua Zhou

14:40-15:10

Syntheses of lignin-derived thioacidolysis dimers as reference compounds for lignin characterization by thioacidolysisFengxia Yue, Fachuang Lu, Runcang Sun, and John Ralph

Some insights on common dry strength agentsRonald Lai, Guanglei Zhou, Beihai He and Hui Cui

Advanced biofuels from biochemical conversion of alkaline pretreated corn stoverYe Chen, Mark A. Stevens, Yongming Zhu, Jason Holmes, and Hui Xu

Caspase-like protease activity is involved in secondary xylem development in Populus tomentosa Carr.Jia-Jia Han, Wei Lin, Ke-Ming Cui, and Xin-Qiang He

15:10-15:40

Quantitative evaluation of biphenyl type structures in lignin by nitrobenzene oxidationAkari Tamai, Takuya Akiyama, and Yuji Matsumoto

Designing microfabricated paper devices through tailored polymer attachmentMarkus Biesalski, Alexander Böhm, Melanie Gattermayer, Samuel Schabel, and Elmar Bonarcurso

Exploring the economic potential of paper industry sludges for ethanol productionHui Chen, Ronalds Gonzalez, Richard Phillips, Richard Venditti, Hasan Jameel, and Sunkyu Park

The draft genome of a desert poplar and tree stress adaptationJianquan Liu

15:40- Coffee/tea break

16:00

Nov. 7th, 2012, Wednesday Afternoon 2nd Sessions

Room A (Session 5)Lignin & Extractives (II)Chair: Yuan-Zong Lai

Room B (Session 6)Paper (II)Chair: Samuel Schabel

Room C (Session 7)Bioenergy (II)Chair: Eugene I-Chen Wang

Room D (Session 8)Wood Biotechnology (II)Chair: Meng-Zhu Lu

16:00-16:30

Application of TOF-SIMS to the chemical mapping of wood components and introduction of Cryo TOF-SIMS/SEM systemKazuhiko Fukushima, Kaori Saito, Yasuyuki Matsushita, Dan Aoki, and Katsushi Kuroda

Modern approach to retention programs - chemistry, application, sensitivities and impact on sheet propertiesPrzemyslaw Pruszynski

Effects of lignin on the hydrolysis of cellulose by pure and multicomponent enzymesRaquel Martín-Sampedro, Jenni Rahikainen, Ingrid Hoeger, Kaisa Marjamaa, Kristiina Kruus, Ilari Filponnen, Janne Laine, and Orlando J. Rojas

Sequencing the genome of a shrub willow facillitating the domestication of fast growing woody plantsXiaogang Dai, Kai Feng, Yingnan Chen, Mingxiu Wang, and Tongming Yin

16:30-17:00

Analysis of lignin structure using TOF-SIMSYasuyuki Matsushita, Kousuke Ioka, Kaori Saito, Ruka Takama, Dan Aoki, and Kazuhiko Fukushima

Fine filler retention induced by novel comb-like cationic poly(vinyl alcohol)Qian Yang, and Huining Xiao

The influences of transgenic samples on the cellulase- mediated saccharificationDouyong Min, Quanzi Li, Qinmin Chen, Hou-min Chang, Vincent Chiang, and Hasan Jameel

Allelic variation in candidate genes associates with growth and wood properties in Populus spp.Deqiang Zhang, Qingzhang Du, Baohua Xu1, and Jiaxing Tian

17:00-17:30

A modified method for isolation of cellulolytic enzyme lignin from wheat straw based on LiCl/DMSO solvent systemFeng Gu, Wangxia Wang, Yongcan Jin, Zhiguo Wang, Tomoya Yokoyama, and Yuji Matsumoto

A novel fly ash- based calcium silicate paper filler: Characterization and applicationShunxi Song, Meiyun Zhang, Jack Zhe Li, Zhibin He, and Yonghao Ni

TG-FTIR study on pyrolytic kinetic mechanism of wood ligninXiaoli Gu, Ming He, Kanghua Cheng, and Zhongzheng Li

Impacts of eucalypt supply and demand issues in China on wood and fiber characteristicsRoger J. Arnold , and Yaojian Xie

17:30-18:00

Polymerization of coniferyl alcohol by a versatile peroxidase from Bjerkandera sp: Effects of H2O2 concentration, aqueous organic solvents and pHRoberto Taboada-Puig, Thelmo A. Lú-Chaua, María Teresa Moreiraa, Gumersindo Feijooa, Juan Manuel

Effect of the Interactions between lignin and optical brightening agents on paper optical propertiesHe Shi, Yating Wang, Hongbin Liu, and Yonghao Ni

Generic method for attaching biomolecules via avidin-biotin complexes immobilized on films of regenerated celluloseH. Orelma, L.-S. Johansson, Ilari Filpponen, Orlando J. Rojas, and J. Laine

The genome of a pathogen living in the surface coat of Bursaphelenchus xylophilusKai Feng, Xiaogang Dai, Yingnan Chen, Boguang Zhao, and Tongming Yin

Lemaa, Kurt Fagerstedtb, Taina Ohra-ahoc, Tiina Liitiäc, Harri Heikkinenc, Jarmo Ropponenc, and Tarja Tamminenc

18:30-20:00 Welcome Dinner

Nov. 8th, 2012, Thursday Morning 1st Sessions

Room A (Session 9)Lignin & Extractives (III)Chair: Kazuhiko Fukushima

Room B (Session 10)Paper (III)Chair: Przemyslaw Pruszynski

Room C (Session 11)Bioenergy (III)Chair: Thomas Amidon

08:30-09:10(Invited Speaker)

Biosynthetic pathway for syringyl lignin in rice (Oryza sativa)Taichi Koshiba, Norie Hirose, Mai Mukai, Masaomi Yamamura, Masahiro Sakamoto, Shiro Suzuki, Takefumi Hattori, and Toshiaki Umezawa

Novel ASA-type paper sizing agents based on renewable resources: From model experiments over lab trials to paper machine and large-scale productionElisabeth Lackinger, Jürgen Sartori, Antje Potthast, and Thomas Rosenau

Enzymatic activity of the cellulases adsorbed on lignophenolsHiroshi Nonaka, Ai Kobayashi, and Masamitsu Funaoka

09:10-09:40

Quantitative structures of lignins obtained by multiple NMR techniquesJia-Long Wen, Tong-Qi Yuan, and Run-Cang Sun

Starch-based fixing agent with proper substitution degree for controlling dissolved and colloidal substances in a bleached chemithermomechanical pulpLijun Wang, Yiqian Zhang, Tongzhou Di, Lingzhi Luo, and Huifang Zhao

Removal of acetic acid from spent sulfite liquor using anion exchange resin for effective xylose-fermentation with Pichia stipitisShiho Takahashi, Keishi Tanifuji, Kevin Shiell, M. Sarwar Jahan, Hiroshi Ohi, and Yonghao Ni

09:40-10:10

Formation of hydrogen bonds between lignin and cellulose oligmers in DMSO-d6Satoshi Kubo, Koh Hashida, Tatsuhiko Yamada, and Shuji Hosoya

Effects of zein emulsion on water barrier and grease resistance of paperZhaoping Song, Yuanfeng Pan, and Huining Xiao

Co-production of electricity and ethanol, economics of value prior combustionR. Gonzalez, T. Treasure, R. Venditti, Y. Pu, H. Jameel, S. Kelley, and Jeffrey Prestemon

10:10- Kinetic analysis of the β-O-4 bond New monitoring and application Maximum enzymatic hydrolysis of

10:40 cleavage of lignin during alkaline cooking processSatoko Shimizu, Tomoya Yokoyama, Takuya Akiyama, and Yuji Matsumoto

strategies for optimized performance of stabilized-chlorine programs in papermaking systemsWenli Tu, Laura Rice, Vincent Nai Shing Wong, Sugiono Tamsil, Xiao-Feng Yang, Liliya Lund, and Justyna Miller

sulfite pretreated bagasse pulp by an enzyme cocktailJie Yu, Jia Ouyang, Ming Zhang and Baotian Li

10:40-11:00 Coffee/tea break

Nov. 8th, 2012, Thursday Morning 2nd Sessions

Room A (Session 12)Lignin & Extractives (IV)Chair: Toshiaki Umezawa

Room B (Session 13)Paper (IV)Chair: Martin Hubbe

Room C (Session 14)Bioenergy (IV)Chair: Guigan Huang

11:00-11:30

Chemical composition of essential oils and extractives from selected tree species of UgandaStefan Böhmdorfer, Christine Betty Nagawa, Antje Potthast, and Thomas Rosenau

Possibilities and limitations of the flotation process as measure to reduce mineral oil components in recovered paper suspensionsC. Ewald, H.-J. Putz, A. Kersten, and S. Schabel

Upgrading bio-oil by mild hydrogenation with amorphous alloy supported NiMoB catalyst on mesoporous silicaMingjian Zhang, Wenzhi Li, Shuai Zu and Wei Huo

11:30-12:00

Antitermitic activity of leaf essential oils from Cinnamomum species in TaiwanChun-Ya Lin, Sen-Sung Cheng, and Shang-Tzen Chang

Synergy of bentonite and starch enhances the physical properties of handsheets from recycled pulp, Yuan-Shing Perng, and Eugene I-Chen Wang

Characteristics of cellulose-degrading microbes in anaerobic co-digestion of swine manure with corn stover for biogas productionTaoyuan Wei, Zhaoyang You, Zhimin Liu, Jorge Gontupil, and Jay J. Cheng

12:00-12:30

IR-SNOM analysis of occluding substances in lumina of xylem elements in sapwood of Quercus serrata attacked by Platypus quercivorusTakayuki Yamagishi, Toshihiro Yamada, and Yuji Matsumoto

The preparation and characteristics of powdery pigment-coating used in dry coating of paperGuowei Chen, and Rendang Yang

Study on numerical simulation of fiber slurry flow field in the internal forward cleanerJian Zhang, Yongli Chen, and Hui Zhang

12:30-14:00 Lunch

Nov. 8th, 2012, Thursday Afternoon 1st Sessions

Room A (Session 15)Carbohydrates (I)Chair: Tetsuo Kondo

Room B (Session 16)Pulping & Bleaching (I)Chair: Huaiyu Zhan

Room C (Session 17)Biomaterials (I)Chair: Yasumitsu Uraki

14:00-14:40(Invited Speaker)

Production of nanocellulose from native cellulose – various options utilizing ultrasoundShree P. Mishra, Anne-S. Manent, Bruno Chabot, Claude Daneault, and Kwei-Nam Law

Minimizing viscosity loss during totally chlorine free bleaching of hardwood kraft pulpFrédéric Pouyet, Dominique Lachenal, Satyajit Das, and Christine Chirat

Fabrication of oriented nano-fibrous films from a novel type of microbial cellulose pellicle secreted by Gluconacetobacter xylinus under an oxygen–lacking environmentTetsuo Kondo, Aya Nagashima, Tsubasa Tsuji, and Shingo Yokota

14:40-15:10

Selective modification of carboxyl groups on TEMPO-oxidized cellulose nanofibril surfacesShuji Fujisawa, Tomoyasu Ikeuchi, Yusuke Okita, Miyuki Takeuchi, Tsuguyuki Saito, and Akira Isogai

Use of a combined process for recovery of dissolved organics in pre-hydrolysis liquor of the kraft-based dissolving pulp production processJing Shen, Ishneet Kaur, Mir Mojtaba Baktash, and Yonghao Ni

Preparation and characterization of cast films of partially deacetylated chitin nanofibersYan Zhang, Yimin Fan, Shiyuan Yu, and Akira Isogai

15:10-15:40

Cellulose–clay nanocomposite films with high gas barrier propertiesQuanling Yang, Chun-Nan Wu, Tsuguyuki Saito, and Akira Isogai

Modeling hydrogen peroxide bleaching to predict optical properties of bleached hardwood CMPAbouzar Hatam, Kambiz Pourtahmasi, Hossein Resalati, and A. Hossein Lohrasebi

Extraction and utilization of hemicellulose for new biomaterial applicationsAbdus Salam, Richard A. Venditti, Joel J. Pawlak, Khaled El-tahlawy, and Ali Ayoub

15:40-16:10

Preparation and characterization of cellulose gels from LiCl/DMSO solutionZhiguo Wang, Yongcan Jin, Shigenori Kuga, and Yuji Matsumoto

Treatment of pre-hydrolysis liquor of kraft-based dissolving pulp process with precipitated calcium carbonatePedram Fatehi, Fadia Hamdan, and Yonghao Ni

Preparation of the temperature sensitive hemicellulose-based hydrogels via click chemistryXuesong Zhou, and Ju Fang

16:10-16:30 Coffee/tea break

Nov. 8th, 2012, Thursday Afternoon 2nd Sessions

Room A (Session 18)Carbohydrates (II)Chair: Yimin Xie

Room B (Session 19)Pulping & Bleaching (II)Chair: Dominique Lachenal

Room C (Session 20)Biomaterials (II)Chair: Orlando J. Rojas

16:30-17:00

Preparation of amphiphilic cellulose derivatives and their self-assembled nanoparticles for drug delivery applicationsXiaohui Wang, Yanzhu Guo, Hui Chen, and Runcang Sun

The “carbonate effect”: an important concept to explain the efficiency of green liquor-modified kraft pulpingVed Naithani, Hasan Jameel, Sujit Banerjee, and Lucian A. Lucia

Catalytic production of gamma-valerolactone from biomass-based levulinic acidChunhui Zhang, and Troy Runge

17:00-17:30

Transparent biocomposites with improved properties prepared from cellulose and epoxy resin through thermal curingShilin Liu, Dandan Tao, Ren Liu, Hang Shu, Shengwen Zhang, and Xiaoya Liu

Furfural formation from the pre-hydrolysis liquor of a hardwood kraft-based dissolving pulp production processHaitang Liu, Huiren Hu, Sarwar Jahan, and Yonghao Ni

Large-scale nanofibrillated cellulose film: An overview on its production, properties, and potential applicationsMaria Soledad Peresin, Jari Vartiainen, Vesa Kunnari, Timo Kaljunen, Tekla Tammelin, and Pia Qvintus

17:30-18:00

Versatile coating films from cellulose/chitin nanofibril multilayersZi-Dong Qi, Tsuguyuki Saito, Yimin Fan, and Akira Isogai

Adsorption analysis of lignocelluloses of model pre-hydrolysis liquor on activated carbonPedram Fatehi, Jennifer Ryan, and Yonghao Ni

Fibre deformations in bagasse pulp induced by high consistency refining and their effect on strength properties of paperXiling Zeng, Shiyu Fu, Elias Retulainen, and Yangyang Peng

Nov. 9th, 2012, Friday Morning 1st Sessions

Room A (Session 21)Carbohydrates (III)Chair: Kwei-Nam Law

Room B (Session 22)Pulping and Bleaching (III)Chair: Jorge Luiz Colodette

Room C (Session 23)Biomaterials (III)Chair: Qingxi Hou

08:30-09:10(Invited Speaker)

Analysis of kinetic isotope effect in hydrogen abstraction from carbohydrateAkihiko Nakagawa, Tomoya Yokoyama, and Yuji Matsumoto

Influence of TEMPO-mediated oxidation on thermomechanical pulpPu Ma, and Huamin Zhai

Electrospun micro- and nano-fibers from multicomponent lignocellulose systems: Functional materials with special surface, mechanical and thermal propertiesMariko Ago, João Silveira, Laura Taajamaa, Joseph E. Jakes, Eero Kontturi, Edison Bittencourt, Janne Laine, and Orlando J. Rojas

09:10-09:40

Preparation and characterization of nanocrystalline cellulose from bamboo fibers by controlled cellulase hydrolysisYong Zhang, Xiao-Bing Lu, Wei Chen, and Wei-Jun Lv

Aspects of fibre wall swelling in high-yield pulpHelena Fjellström, Per Engstrand, and Myat Htun

The preparation of carbon fibers from softwood lignin through chemical thermostabilizationJian Lin, Satoshi Kubo, Tatsuhiko Yamada, Keiichi Koda, and Yasumitsu Uraki

09:40-10:10

Hemicellulose composition in different cell wall fractions obtained by DMSO/LiCl wood solvent system and enzyme hydrolysisYu Huang, Zhiguo Wang, Linshan Wang, Yuesheng Chao, Takuya Akiyama, Tomoya Yokoyama, and Yuji Matsumoto

Preparation of ASA emulsion co-stabilized by Laponite and polyaluminum sulfate and its sizing performance on BCTMPHaidong Li, and Wenxia Liu

Opportunities of biomass dissolved in low cost mixed solvents: efficient pretreatment and components fractionationHaibo Xie, Zhilian Wu, Hongwei Shen, Zhiwei Gong, Zongbao Zhao

10:10-10:40

Protective effect of sulfurous acid on the degradation of monosaccharides during acid treatmentYan Shi, Tomoya Yokoyama, Takuya

Increasing HYP content in coated paper grades: the effect on printability and print qualityHongbin Liu, Zhirun Yuan, Xuejun Zou, Yajun Zhou, Yonghao Ni

Conversion of sulfuric acid lignin generated during bioethanol production from lignocellulosic materials into polyesters with ε-caprolactone

Akiyama, Makoto Yashiro, and Yuji Matsumoto

Yasuyuki Matsushita, Toyoki Inomata, Yasuo Takagi, Tatsuya Hasegawa, and Kazuhiko Fukushima

10:40-11:00 Coffee/tea break

Nov. 9th, 2012, Friday Morning 2nd Sessions

Room A (Session 24)Carbohydrates (IV)Chair: Tomoya Yokoyama

Room B (Session 25)Pulping and Bleaching (IV)Chair: Per Engstrand

Room C (Session 26)Biomaterials (IV)Chair: Huining Xiao

11:00-11:30

Variables affecting the fabrication of mesoporous silica nanotubes based on nanocrystalline cellulose and the process optimizationJunlong Song, Guangshuai Fu, Aijian He and Yongcan Jin

Alternate technology for production of dissolving like eucalypt pulpJorge L. Colodette, Teresa C. Fonseca, and Fernando J. B. Gomes

Application of cellulosic fiber materials for the remediation of petroleum spills in waterMartin A. Hubbe, Katherine C. Payne, Colby D. Jackson, Carlos E. Aizpurua, and Orlando J. Rojas

11:30-12:00

Cellulose-based nanomaterials functionalized by surface chemical modificationShingo Yokota, Shiro Sakoda, and Tetsuo Kondo

Bamboo kraft cooking and bleaching strategy for nano fiber formation, Thomas Greschik, Huaiyu Zhan, and Hailong Li

Preparation of novel lignin-based cement dispersant via amphiphilic derivatization of technical ligninTomohiro Aso, Keiichi Koda, Satoshi Kubo, Tatsuhiko Yamada, Isamu Nakajima, and Yasumitsu Uraki

12:00-12:30

An update on fractionation of wood polymers by carboxymethylation – lignin reactivityShang-Ning Chien, Thomas E. Amidon, and Yuan-Zong Lai

Effects of hot dispersion with reductive bleaching on the brightness of deinked pulp in both laboratory and mill machineYuan-Shing Perng, and Eugene I-Chen Wang

Enhanced hydrophobicity and thermal stability of hemicelluloses by butyrylation in [BMIM]Cl ionic liquidLi-Ming Zhang, Tong-Qi Yuan, Run-Cang Sun, and Feng Xu

12:30-13:45 Lunch

Nov. 9th, 2012, Friday Afternoon and Evening Activities

Yifu S & T BuildingPoster Session

13:45-16:45 Poster presentationMain Seminar HallKeynote Lecture, Chaired by Prof. Hou-min Chang

16:45-17:35 Isolation, functionalization and applications of hemicelluloses and their derivativesby Runcang Sun, Beijing Forestry University, ChinaMain Seminar HallClosing Ceremony, Presided by Prof. Zhongzheng Li

17:35-17:40 Conference closing remarks by Prof. Shiyuan Yu, Organizing Committee Chair17:40-17:55 Announcements of ISWFPC 2013 and 2015 by Prof. Hou-min Chang and Prof. Thomas Rosenau17:55-18:00 Closing remarks by Prof. Hou-min Chang, Scientific Program Committee Chair18:30-20:00 Conference Banquet

Poster Presentations

The left numbers are the manuscript numbers we have been contacting you with. They are also the poster numbers you should find at the poster sites when you come to the symposium, and put your poster up there.

Posters presentation will be held from 13:45 to 16:45, on November 9th.

1. Chemistry and Physics of Fiber Cell Wall Components1-1-002 Characterization of cellulose nanocrystals by acid hydrolysis combined

with different pretreatment processesFengxia Dong, Hongfeng Liu, Xiaolei Huang, Wen Liu

1-1-005 Cationic hydrogels based on quaternized cellulose for removing methyl orange dye in wastewaterShaoping Yang, Shiyu Fu, Juanjuan Liu, Xiling Zeng

1-1-007 Improving the yield of trimethylsilyl cellulose by activation of cellulose with ethylenediamine and alkaliAijian He, Haorui Liu, Hongmei Tian, Yong-an Wang, Yongcan Jin, Qiang Cheng, Junlong Song

1-1-011 Study of hydroxypropylmethyl cellulose surface activity at the air-water and solid-water interfacesQing-yong Li, Jun Ye, Jian Xiong

1-1-013 Preparation of porous magnetic cellulose microspheres and their structure propertiesJun Gu, Weibing Wu, Liye Zhu, Murong Gong, Yi Jing, Hongqi Dai

1-1-015 Synthesis and solution behaviors of amphiphilic cellulose derivativesYanzhu Guo, Xiaohui Wang, Zuguang Shen, Xuancai Shu, Hui Chen, Runcang Sun

1-1-019 Controlled grafting modification of cellulosic fibers via cellulose xanthate mediated graft polymerizationDejuan Li, Yingjuan Fu, Menghua Qin

1-1-020 Synthesis of polyfunctional macroinitiator for ATRP based on cellulose in ionic liquidXinglei Pang, Yingjuan Fu, Menghua Qin

1-1-021 TEMPO-mediated surface modification of nano-crystalline celluloseZhengliang Cheng, Yang Gao, Qinghua Xu, Menghua Qin

1-2-001 Xylan citrate prepared by semi-dry oven method for improving its absorbency Shuaiyang Wang, Huiling Li, Junli Ren, Chuanfu Liu, Runcang Sun

1-2-004 Xylan sulphates prepared via microwave-assisted esterifications reaction from corncobDi Peng, Xuesong Zhou

1-2-006 Development and characterization of hemicelluloses edible filmsYuxin Liu, Jinhui Peng, Bing Sun, Zhongliang Wang, Keli Chen, Yunhua Huang

1-2-007 Isolation and structural characterization of hemicelluloses from eucalyptus wood based on ionic liquid pretreatmentJi-Kun Xu, Yong-Chang Sun, Feng Xu, Run-Cang Sun

1-2-010 Isolation and characterization of hemicelluloses from corncob pretreated with ionic liquidS.N. Sun, M.F. Li, T.Q. Yuan, F. Xu, R.C. Sun

1-2-011 Novel cyanoethyl hemicelluloses prepared in aqueous solution: synthesis and characterizationXuefei Cao, Shaoni Sun, Linxin Zhong, Xinwen Peng, Runcang Sun

1-3-001 The structural change of LCC in plant by the method of isotopic tracer techniqueHaitao Yang, Xing Zheng, Lan Yao, Yimin Xie

1-3-002 Elucidation of the structure of dehydrogenation polymer-xylose complex by isotopic tracer techniqueMeng Zhang, Haitao Yang, Lan Yao, Yimin Xie

1-3-004 Modification and characterization of reed and rice straw soda lignin through phase-separation systemHao Ren, XianMing Wang, Yan Chen, Masamitsu Funaoka

1-3-011 Isolation and characterization of cotton stalk lignins based on different complete dissolution pretreatmentsLing Y. Meng, Su M. Kang, Xue M. Zhang, Yu Y. Wu, Run C. Sun

1-3-012 Characterization of lignin from cotton stalk isolated based on ammonia hydrothermal systemSu M. Kang, Ling P. Xiao, Ling Y. Meng, Xue M. Zhang, Run C. Sun

1-3-013 Microwave-enhanced extraction of lignin from birch in formic acid: structural characterization and antioxidant activity studyShuai Zhou, Lu Liu, Bo Wang, Feng Xu, Runcang Sun

1-3-014 Extraction of lignin from wood biomass using a new ionic liquid at open atmosphereYong C. Sun, Ji K. Xu, Bo Wang, Feng Xu, Run C. Sun

1-3-016 Structural changes of birch lignins during auto-catalyzed organosolv pretreatment and enzymatic hydrolysisJia L. Wen, Bai L. Xue, Feng. Xu, Run C. Sun

1-3-019 Structural variation of lignin during the acid-pretreatment based biorefinery processK. Wang, H.Y. Yang, F. Xu, R.C. Sun

1-3-020 Physicochemical characterization of lignin fractions isolated from Dendrocalamus sinicusZheng-Jun Shi,, Ling-Ping Xiao, Jia Deng, Feng Xu, Run-Cang Sun

1-3-022 Isolation of lignin from rice straw based on LiCl/DMSO dissolutionWenjuan Wu, Zhiguo Wang, Yongcan Jin, Huamin Zhai, Yuji Matsumoto

1-3-023 Effects of LiCl/DMSO dissolution on the structural characteristics of rice straw ligninWenjuan Wu, Zhiguo Wang, Yongcan Jin, Huamin Zhai, Yuji Matsumoto

1-3-024 Structural characterization of the lignin from bamboo SCMPBing-yun Li, Huai-yu Zhan, Shi-yu Fu

1-3-025 Spectral analysis of lignin in photocatalytic degradationZhe Ren, Ruijie Liu, Xiangdong Xu, Ruiping Wu, Yongming Fan

1-3-028 Effects of lignin structure on phenolization conditions and product propertiesJuan Zhang, Yan Zhao, Yiqin Yang, Hao Ren, Yongcan Jin

1-3-031 Structural changes of the lignin of Eulaliopsis binata during various pretreatmentsJiebin Tang, Kefu Chen, Jun Xu, Jun Li

1-3-032 Characterization of wheat straw residual lignin treated by NaOH-urea-thiourea complex solutionBinbin Bian, Huamin Zhai

1-3-033 Isolation of corn stalk rind lignin from biorefinery process using organic acidsZhiyong Li, Yan Zhang, Yu Fu, Huang Ping，Huamin Zhai

1-3-034 Isolation of lignosulphonate in wheat straw alkaline sulfite pulping spent liquor by combination of xylanase hydrolysis and ultrafiltrationGuangbei Hou, Huamin Zhai

1-4-002 Phenolic extractives from Eucommia ulmoides rootsChuan-Ling Si,, Ju-Zheng Jiang, Shi-Chao Liu, Hai-Yan Hu, Pan-Pan Qin, Yi-Yuan Lu, Guo-Jing Yu, Guang-Hui Xu, Xiao-Dan Ren

1-4-003 HS-SPME analysis of the volatile compositions of Paulownia tomentosa var. tomentosa extracted by supercritical carbon dioxideChuan-Ling Si,, Shi-Chao Liu, Hai-Yan Hu, Ju-Zheng Jiang, Yi-Yuan Lu, Pan-Pan Qin, Xiao-Dan Ren, Guo-Jing Yu, Guang-Hui Xu

1-4-004 Chemical composition and anti-inflammatory activity of extracts from Paulownia tomentosa var. tomentosa xylemChuan-Ling Si,, Hai-Yan Hu, Xue Xia, Shi-Chao Liu, Ju-Zheng Jiang, Guo-Jing Yu, Xiao-Dan Ren

1-4-006 Preliminary studies on the decay-resistant capability and antioxidant activity of aqueous extracts from Intsia palembanica heartwoodYu-Han Chen, Ting-Feng Yeh, Shang-Tzen Chang

1-5-001 Distribution of tracheid wall polymers in Pinus yunnanensis mild compression wood determined by confocal Raman microscopy and SEM-EDXAZhe Ji, Zhi-Heng Zhang, Jian-Feng Ma, Feng Xu

1-5-002 Adsorption of metal ions on wood and its components Satoshi Kubo, Katsushi Kuroda, Shuji Hosoya, Yuko Itoh, Kengo Magara

1-5-003 Chemical composition variations of the Dendrocalamus latiflorus shoot

in different developmental stagesWang-Jung Chang, Mao-Ju Chang, Shang-Tzen Chang, Ting-Feng Yeh

1-5-004 Characterization of ultrastructural and compositional heterogeneity of Cornus alba L. wood tissues using TEM and Raman imagingJianfeng Ma, Zhiheng Zhang, Feng Xu

1-5-006 Effects of cellulose, hemicellulose and lignin on dissolution of soft wood pulp in aqueous alkali/urea solutionsZhuqun Shi, Jie Cai, Shigenori Kuga, Yuji Matsumoto

2. Molecular Biology and Genetic Engineering of Fiber Resources2-1-002 Detection and functional analyses of microsatellites in coding sequences

of pinesFanming Kong, Xiaolong Wang, Xiaogang Dai, Yingnan Chen, Tongming Yin, Shuxian Li

2-1-008 Transcriptome differential analysis of a chimeric peach treeYan Mao, Danial Hassani, Shuxian Li, Tongming Yin

3. Pulping, Bleaching and Papermaking Chemistry3-1-005 Investigation on the generation of violuric acid radical in the

electrochemically mediated delignification system of pulp fibersYajie Zhong, Fangong Kong, Shoujuan Wang, Guihua Yang, Shiyu Fu, Huaiyu Zhan

3-1-010 Effect of H2O2 catalyzed by molybdate on the reduction of dissolved and colloidal substance in the bleaching process of ONPJin Xue, Haiqiang Shi, Qingwei Ping

3-1-012 Effects of sulfite pretreatments on surface chemistry and enzymatic digestibility of royal palm sheath fibers and finesNing Li, Shiyu Fu, Hao Liu

3-1-016 Comparison of wood characteristics and pulping properties of bamboo-willow and two fast-growing hardwoodsJianguo Li, Ming Lei, Hongjie Zhang

3-1-019 Research on cotton stalk pulping with alkaline peroxide extruding pulpZhijun Hu, Xunzai Nie

3-1-020 Study on corrosion of the stainless steel in chlorine dioxide solutionShumei Wang, Hongqi Dai, Lihua Lu, Jiarong Liu

3-1-021 Oxygen delignification of wheat straw soda pulp with anthraquinoneZhulan Liu, Yunfeng Cao

3-1-022 Effects of steam explosion on the extraction of hemicellulose from corn stover and the properties of hand sheetsHaisong Wang, Hongling Gao, Chao Liu, Bin Li, Guang Yu, Xindong Mu

3-1-026 Alkali extraction and xylanase pretreatment properties of corn stalk rind pulp from organic acids biorefineryPing Huang, Zhiyong Li, Huamin Zhai, Yan Zhang

3-2-001 Synthesis and application of a water-soluble polyampholyte AM-DMDAAC-AA

Xuan Sun, Huiwen Qian, Hongqi Dai, Weibing Wu, Shengtao Mao, Jingjing Wang3-2-002 The influence of lime mud calcium carbonate on AKD sizing

Yang Yang, Jingang Liu, Yanqun Su3-2-003 Performance and mechanism of aluminum sulfate in internal sizing with

pickering asa emulsionDehai Yu, Zhaoyun Lin, Youming Li

3-2-004 Preparation of enzymatic starch modified by TEMPO oxidation and its application on surface sizingYujuan Zhang, Hongqi Dai, Yuanyuan Li, Shengtao Mao, Jingjing Wang

3-2-005 Preparation of cross-linking and hydrophobically associating CPAM as retention aidWeibing Wu, Jun Gu, Murong Gong, Yi Jing

3-2-007 Synergistic emulsification of pickering ASA emulsion by dodecane and nano-montmorillonite modified with silane coupling agentZhaoyun Lin, Dehai Yu, Youming Li

3-2-008 Flame-retardancy of polyaniline-coated conductive paper composites prepared via in situ chemical polymerization processXianna Wu, Xueren Qian, Xianhui An

3-2-009 Effect of process parameters on cationic ethylene stearamideMei Xu, Hongqi Dai, Weibing Wu, Shumei Wang

3-2-010 Preparation and application of environmental friendly PAE wet-strength agentChuanshan Zhao, Huirong Yang, Qianqian Xing, Wenjia Han

3-2-012 ASA emulsions stabilized by laponite and urea: preparation and sizing performanceKaifeng Qian, Wenxia Liu, Jie Zhang, Huili Wang, Zhe Wang

3-2-013 Anionic polyelectrolyte for effective removal of toner contaminants in flotation deinkingBo Li, Gaosheng Wang, Junyong Zhu, Kefu Chen

3-2-014 Study on the effect of thermo-sensitive polymers as retention aids and drainage aidsZhiyun Tang, Xiaofan Zhou, Weibing Wu, Jinxia Ma

3-2-016 Study on the preparation and deinking efficiency of the modified lignin-phenols surfactantsCuiping Mao, Shubin Wu, Bo Li

3-2-017 Immobilization of α-amylase on/in PVA foam particles with ethyl cellulose and its application in viscosity reduction of cornstarchQing Guo, Xiaofan Zhou, Jinxia Ma

3-2-018 Nanoparticles in stabilization and sizing development of ASA emulsionsWenxia Liu, Huili Wang, Zhe Wang, Dehai Yu, Pengxiang Ding, Zhenhuan Zhao

3-2-021 Sizing performance of ASA emulsions stabilized by laponite and sodium alginateWei Zhang, Wenxia Liu, Haidong Li, Jinmei Han, Jin Liu, Huili Wang, Zhe Wang

3-2-022 Synthesis and application of anionic acrylic emulsion used as paper wet-strength additiveXin Liu, Chunhua Tian, Yuying Wu, Xueming Zhang

3-2-023 Synthesis of starch-based flocculant in aqueous two-phase system and its application in papermaking wastewater treatmentYuan Li, Zhaoli Liu, Yafeng Cao, Fengzhi Tan

3-2-024 Effects of hemicellulose removal on structure properties and printability of paperGuichun Hu, Yumin Li, Shiyu Fu, Hui Li, Huaiyu Zhan

3-2-025 ASA emulsion stabilized by laponite nanoparticles and alanineHuili Wang, Wenxia Liu, Xiaofan Zhou, Wei Zhang

3-2-026 New starch-based fixing agents made by starch degradation followed by cationic etherificationLijun Wang, Tongzhou Di, Guodong Li, Lingzhi Luo, Zhijun Hu

3-2-028 Using fixing agents to improve adsorption of wet end chemicals onto a bleached chemithermo-mechanical pulpLingzhi Luo, Lijun Wang, Rendang Yang, Jianhua Wang

3-2-031 The cationic surfactant as co-agglomeration on the laser printed office paper agglomeration deinking under alkaline conditonsJie Jiang, Guolin Tong, Yungchang F. Chin, Wuping Chen

3-2-032 Synthesis and characterization of multi-arm star poly-DMC used as anionic trash catcherShoujuan Bian, Yingjuan Fu, Menghua Qin

3-2-034 Comparison of the adsorption of cationic and native starches onto fillersJinlan Cheng, Huamin Zhai

3-2-037 Application of castor oil-based waterborne polyurethane in electrostatic copy paper surface enhancingYaqi Ma, Huiming Fan, Cheng Zhang, Jian-an Liu

3-2-038 Preparation of epoxy cross-linked modified styrene–acrylate emulsion sizing agentHongyan Han, Heng Zhang, Yanchong Zhang, Xiuhong Huang, Mingchun Li

3-2-040 Limonene microcapsules: preparation and application in decorative paperPengtao Liu, Xiangmei Wei, Lanfeng Hui, Chuanling Si, Zhong Liu

3-2-041 Synthesis and study of core-shell γ-Fe2O3/SiO2 nanocomposite particlesLei Chen, Yi Jing

3-2-042 Synthesis and application of cationic styrene acrylic ester polymer surface sizing agentYoujia Cui, Yi Jing

3-2-044 The performance of cationic starch/nanosilica system on the retention and drainage of OCC pulpSeyed Mohammad Hossein Nabavi, Ahmad Jahan Latibari, Seyed M. Javad Sepidehdam

3-2-045 Study on the functions of water-soluble epoxy acrylate resin in papermakingXiumei Zhang, Peng Zhou, Guoxin Xue, Yong Zhang

4. Biochemistry and Biotechnology on Pulping, Bleaching and Papermaking4-1-001 Effect of xylanase-assisted refining on masson TMP wet-end chemistry

and subsequent bleachabilityQingxian Miao, Lihui Chen, Liulian Huang

4-1-006 Alkali-oxygen pulping of bagasse with laccase pretreatmentHong Li, Bing Sun, Yuxin Liu, Keli Chen, Ling Yang, Jin Yang

4-1-008 Improving the antimicrobial activity of ramie by treatment with laccase and phenolic compoundsJicheng Pei, Ying Zhang, Xiaoting Yan, Xiuling Yu

4-1-010 Effect of pH values on the agglomeration and dispersion of microstickies in the ONP whitewaterZhiwei Wang, Bo Li, Wenjing Liu, Shubin Wu

4-1-012 Laccase-catalyzed modification of pulp with hydrophobic compoundJie Hu, Na Liu

5. New Technology on Pulping, Bleaching and Papermaking5-1-001 Study on the improving mechanism of pressure screen contoured slot

shape based on fluentYong-li Chen, Jian Zhang, Hui Zhang

5-1-005 Research on pulping conditions improvement by reusing organic acids in the waste liquor from aspen ethanol pulpingHaiming Li, Jinghui Zhou, Dandan Li, Hai Zhang, Ying Han

5-1-006 The theoretical investigation of the saturated falling film evaporation on the horizontal tube with interfacial shear stressChen Wang, Hui Zhang, Hui Du

5-1-007 Effect of different screening helix angles on screening performance of SWECO Vibro-energy® round separator Tao Lin, Jian-wei Song, Xue-feng Yin, Zhi-jie Wang

5-2-001 Mechanism study of paper stiffness improvement by surface sizing application of waterborne epoxy resinYuanyuan Li, Hongqi Dai, Shumei Wang, Weibing Wu, Yujuan Zhang, and Xuan Sun

5-2-002 Influence of metal ion on colloid stability of water-based ink and deposition on fiber Jing Ren, Guangwei Sun, Haiming Li, Fuzheng Liang, Ying Han, Meiyan Wu

5-2-003 Treatment of Cr(VI)-contaminated water with polyaniline/cellulose fiber composite prepared by in-situ polymerization using hydrogen peroxide as oxidantXiangyao Liu, Wanpeng Zhou, Xueren Qian, Jing Shen, Xianhui An

5-2-004 Removal of Cr(VI) from contaminated water by polypyrrole/pulp fiber composite

Yu Lei, Xueren Qian, Jing Shen, Xianhui An5-2-006 Effect of soy protein polymer on performance of covering and printing

for coated paperboardGuangfang Zhou, Jinxia Ma, Huamin Zhai

5-2-008 Preparation and characterization of cellulose-based photocatalytic paper with TiO2 loaded on carbon fibersJie Zhang, Wenxia Liu, Peipei Wang, Kaifeng Qian, Huili Wang, Zhe Wang

5-2-009 Research on printing color reproduction based on dot structureQi Wang, Xiaofan Zhou, Xiaohao Liu, Qing Yi

5-2-020 Effect of styrene-butadiene (SB) latexes on the static rheological behavior of paper coating liquids and mathematical simulationYanjun Tang, Youming Li, Junhua Zhang, Guoxin Xue, Xiumei Zhang, Yu Zhao and Yong Zhang

5-2-023 The synergistic effect and mechanism of mixed xero-graphic copy papers agglomeration deinkingCuixia Wang, Yungchang F. Chin, Guolin Tong

5-2-029 Solid waste high efficient treatment methods of a typical pulp millYugang Li, Keshun Ma, Shouguo Zhang, Mei Lu

5-2-034 Advanced treatment of papermaking wastewater to reduce the water footprintMing Zhang, Mingyu Ma, Hongqi Dai

5-2-035 Homogeneous acetylation of chitosan in ionic liquidsBo Wang, Lu Liu, Shuai Zhou, Feng Xu, Runcang Sun

5-2-050 Study on evaluation and detection method of heat-sensitive stencil paper printing abilityWeiguo Bai

6. Lignocellulosic-based Biochemicals and Biomaterials6-1-001 One-step conversion of cellulose to sorbitol under acid conditions over

Ru/C catalystJun Zhang, ShuBin Wu

6-1-002 Catalytic conversion of xylan into furfural by pervoskite-type oxideHuiling Li, Shuaiyang Wang, Junli Ren, Feng Peng, Runcang Sun

6-1-003 Preparation of aromatic aldehydes from ligin oxidation over LaCuxMn1-

xO3 catalystsBin Wang, Kefu Chen, Rendang Yang, Zhu Long

6-1-009 Enzymatic preparation of xylooligosaccharides by Pichia stipitis from sugarcane bagasseJing Bian, Feng Peng, Xiaopeng Peng, Pai Peng, Feng Xu, Runcang Sun

6-1-010 Fast analysis of sugars from lignocelluloses prehydrolysateCongcong Chi, Caifeng Leng, Linghua Guo, Yongjian Xu, Sufeng Zhang, Yongchang Chen, Zeng Zhang

6-1-013 Preparation, characterization and property of chitosan/xylan composite films

Xiaoying Wang, Yunzhi Ling, Xingqiang Pan, Bo Liu, Runcang Sun6-2-003 Succinate-bonded wheat straw pulp: a highly efficient adsorbent of

Cadmium (II) from aqueous solutionsJiuxiao Cai, Hong Guo, Lifeng Chen, Dawei Yang

6-2-004 Mechanical and thermal properties of compatibilized composites of polypropylene and polyethylene with modified ligninHao Ren, Yan Zhang, Dayong Han

6-2-009 The property of waterborne UV-curable polyurethane based on lignin obtained from wheat straw by ethanol extractionFuqiang Chu, Changli Xu

6-2-012 Porous bioadsorbent prepared from biomass in ionic liquid: adsorption of heavy metal ions from aqueous solutionsLinxin Zhong, Xinwen Peng, Dong Yang, Runcang Sun

6-2-013 Effect of NaFeEDTA on the properties of SPI blending filmsZhen-he Cai, Wen-hao Li, Jun Ye, Jian Xiong

6-2-014 Derivatization of sugarcane bagasse with maleic anhydride at room temperature in dimethyl sulfoxide/n-methylimidazole solvent systemAiping Zhang, Lian Mei, Chuanfu Liu, Jun Xie

6-2-015 The effect of pH on the size, distribution CMC/Eu nanocomposites with higher fluorescence propertyYuan Guo, Jian Xiong, Jun Ye

6-2-017 Effect of different ultrasonic treatment during TEMPO oxidation of fully bleached softwood kraft pulpYun Qian, Guolin Tong, Yunchang F. Chin, Wuping Chen

6-2-021 Application of microbial cellulose nanofibers prepared using aqueous counter collision to composites and surface coatingTetsuo Kondo, Ryota Kose

6-2-023 Preparation and characterization of semi-IPN hydrogels based hemicelluloses-g-poly (acrylic acid) and phosphorylated polyvinyl alcoholFeng Peng, Yang Fang, Jing Bian, Pai Peng, Feng Xu, Runcang Sun

6-2-026 Antimicrobial paper based on quaternized carboxymethyl chitosan/organic montmorillonite/Ag NP nanocompositesXiaoying Wang, Yuqiong Luo, Yixiong Cai, Bo Liu, Runcang Sun

6-2-027 Adsorption behaviors of heavy metal ions on chinese fir bark from aqueous solutionWenpeng Su, Yiqin Yang, Hao Zhou

6-2-029 Study on the application of plant fiber lignification in fiberboardLei Wang, Jin Lu, Yimin Xie, Fang Qu, Haitao Yang, Peng Wang

6-2-030 Degradation kinetics of main carbohydrates in pine wood during hot water pre-hydrolysis of kraft-based dissolving pulp productionPingping Li, Yichao Lei, Siwang Li

6-2-050 Chemical characteristics of binderless board from bamboo residue and mechanism of self bonding

Zhenfu Jin, Youming Yu, Nana Shang7. Lignocellulosic-based Bioenergy7-1-001 Pyrolysis characteristics of three major organic components of black

liquorTao Dai, Shubin Wu, Daliang Guo

7-1-002 Catalytic effects of existing form of Na atom on alkali lignin pyrolysisDaliang Guo, Shubin Wu, Yushuang Zhao, Tao Dai, Xiuli Yin

7-1-004 Pyrolysis mechanism of main organic compounds in eucalypt APMP spent liquorYushuang Zhao, Shubin Wu, Daliang Guo

7-1-005 Research on the pyrolysis characteristics and kinetic analysis of bagasse pulp fiberWenjia Han, Chuanshan Zhao, Rendang Yang, Kefu Chen

7-1-007 The effect of acid-chlorite pretreatment on solvolysis liquefaction of bagasseChaoyi Chen, Mingjie Chen, Chuanfu Liu, Runcang Sun

7-1-008 Characterization of solid residues from hydrothermal liquefaction of cypressHua M. Liu, Ming F. Li, Run C. Sun

7-1-009 Liquefaction of bagasse catalyzed by silicotungstic acidQiang Zhang, Fangeng Chen, Minming Wu

7-2-001 Simultaneous saccharification and fermentation of corn stover pretreated by acidic wastewater from monosodium glutamate processLan Yao, Jian Zhao, Yimin Xie, Haitao Yang, Yinbo Qu

7-2-002 Effects of pretreatments of DAIME on physicochemical properties and saccharification of lignocelluloseLong Li, Bin Wang, Rendang Yang, Fei Yang

7-2-005 Effects of cellulase hydrolysis efficiencies with wet oxygen method pretreatment of strawMeiyun Zhang, Pan Wu, Shunxi Song, Yangyu Wu, Ye Liu, Sufeng Zhang, Jun Liu

7-2-006 Comparison of sodium carbonate pretreatment for enzymatic hydrolysis of wheat straw stem and leaf sheath to produce fermentable sugarsTing Huang, Linfeng Yang, Yongcan Jin, Hou-min Chang, Hasan Jameel, Richard Phillips, Zhongzheng Li

7-2-007 Comparison of green liquor pretreatment on Triarrhena and Miscanthus for improving enzymatic saccharificationWangxia Wang, Feng Gu, Yongcan Jin, Laigeng Li, Hou-min Chang, Hasan Jameel, Richard Phillips

7-2-008 Alkali-oxygen pretreatment for the enzymatic hydrolysis of wheat straw to produce fermentable sugarsWenhui Geng, Ting Huang, Yongcan Jin, Hou-min Chang, Hasan Jameel, Richard Phillips, Zhongzheng Li

7-2-009 Rice straw pretreated by sodium carbonate to improve its enzymatic

saccharification Linfeng Yang, Jie Cao, Yongcan Jin, Hou-min Chang, Hasan Jameel, Richard Phillips, Zhongzheng Li

7-2-011 The optimum process of steam explosion pretreatment of Chinese triploid poplar to enhance hydrolysis efficiencyTing Zhao, Lanfeng Hui, Zhong Liu, Li Cui, Xin Tang

7-2-014 Study on the optimum process of acid-catalytic ethanol pretreatment of wheat straw to enhance sugar recoveryLanfeng Hui, Xin Tang, Ting Zhao, Zhong Liu

7-2-020 Adsorption of cellulase onto rice straw substrates pretreated by sodium sulfite and sodium carbonateJie Cao, Linfeng Yang, Shuai Zhang, Wangxia Wang, Yongcan Jin

7-2-024 The impact of lignin on enzymatic hydrolysis of lignocellulosic biomassZhiying Yu, Ki-seob Gwak, Hou-min Chang, Sunkyu Park, Hasan Jameel

7-2-025 Laccase detoxification of main lignin degradation products in steam-exploded corn stover prehydrolyzate and pentose fermentationJunjun Zhu, Qiang Yong, Yong Xu, Xin Li, Xin Huang, Yun Yuan, Jiwei Ren, Jia Ouyang, Shiyuan Yu

7-2-030 Evaluation of the ethanol/soda cooking for sugar cane bagasse and strawDanila Morais de Carvalho, Juan Carlos García, Jorge Luiz Colodette

7-2-050 Study on reaction course and pulp properties of novel aspen acid-catalyzed ethanol pulpingJinghui Zhou, Haiming Li, Yijia Sun, Hai Zhang, Fuzheng Liang

8. High Yield Pulp8-1-003 The effect of fiber fractions of P-RC APMP on surface roughening of base

paperYun Hu, Li Xu, Jingang Liu

8-1-005 Effects of hemicelluloses pre-extraction on the properties of aspen chemithermomechanical pulp and bleached pulpWei Liu, Qingxi Hou, Changbin Mao, Zhirun Yuan, Kecheng Li

8-1-007 The degradation of acid-polysaccharides in aspens CTMP during H2O2/OH- bleachingDan Huo, Guigan Fang, Menghua Qin, Yingjuan Fu

8-1-009 Pulp properties and fiber characteristics of aspen CTMP modified by xylanase Chao Liu, Na Liu, Menghua Qin, Bo Yang

8-1-011 Application of industrial-grade magnesium oxide in the alkaline hydrogen peroxide bleaching of poplar CTMPSong Han, Wei Liu, Junhua Zhang, Zhaoxia Long, Qingxi Hou

8-1-012 Study on the mixture of bleached kraft pulp with P-RC APMP produced by partially substituting Mg(OH)2 for NaOHJunhua Zhang, Wei Liu, Song Han, Yang Li, Yang Wang, Yuan Zhang, Qingxi Hou

8-1-014 Using aspen high-yield pulp to improve bleached wheat straw pulp propertiesHongjie Zhang, Jianguo Li, Ming Lei, Zhibin He, Yonghao Ni

8-1-015 TAED for hydrogen peroxide bleaching of masson pine CTMPNa Yun, Beihai He

8-1-016 Study on the screening processes for fines collection and the properties of poplar P-RC APMP fines collecting with different screening equipmentsTao Lin, Jian-wei Song, Xue-feng Yin, Zhi-jie Wang

8-1-017 Quaternary ammonium cationic tara gum and its application for improving performance of chemithermolmechanical pulpJin Ba, Yang Gao, Qinghua Xu, Menghua Qin

Yifu S & T

Building

Conference Hall

Nanlin Hotel

JinLing Star Metropole

Hotel