4th Draft-Corrected - 24-2058-0003-Rev 03 · fbd part number: 24-2058-0003 notice: ... for the 352...

PARTS CATALOG------------------------------

MODEL FBD352 DISPENSERTHIS DOCUMENT CONTAINS PARTS LISTINGS AND ILLUSTRATIONS

FOR STANDARD PRODUCTION 352 DISPENSERS.FOR INFORMATION CONCERNING PARTS NOT CONTAINED WITHIN THIS

CATALOG OR IF YOU HAVE QUESTIONS CONCERNING PARTS FOR CUSTOMER UNIQUE EQUIPMENT, CONTACT FBD CUSTOMER SERVICE AT 1-866-323-2777.

FBD Partnership, LP • P.O. BOX 18597 • SAN ANTONIO, TX 78218 USA •

• 210-637-2800 • FAX 210-637-2844 • www.fbdfrozen.com •• FBD TECHNICAL SUPPORT • 1-866-323-2777 •• TECHNICAL SUPPORT FAX 1-210-637-2832 •

REV 03: 12/10/2013FBD Part Number: 24-2058-0003

NOTICE:

The information contained in this document is subject to change without notice.FBD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. FBD shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishings, performance, or use of this material.

This document contains proprietary information which is protected by copyright. All rights reserved.

©2013 FBD Partnership, LP. All Rights Reserved.

This manual supersedes and replaces 24-2058-0003/Rev 02,dated 05/07/2013, and is designated as Revision 03.

Please refer to the FBD web site (www.fbdfrozen.com) for information relating to FBD Installation, Operation and Service Manuals, Instruction Sheets, Technical Bulletins, Service Bulletins, etc.

FBD352

DISPENSERS PRODUCED BY FROZEN BEVERAGE DISPENSER (FBD) PARTNERSHIP HAVE ESTABLISHED AN ENVIABLE RECORD OF PERFORMANCE AND DEPENDABILITY.

WE TRUST THAT YOUR EXPERIENCE WITH FBD EQUIPMENT ECHOES THOSE WORDS.

BUT WE ALSO RECOGNIZE THAT SOME PIECES OF EQUIPMENT WILL OCCASIONALLY FAIL, ESPECIALLY IN HIGH VOLUME SALES MACHINES. WITH THAT IN MIND, THIS SINGLE VOLUME PARTS CATALOG HAS BEEN DESIGNED TO HELP YOU ORDER ONLY THE PARTS THAT YOU, OUR CUSTOMER, REQUIRE TO KEEP YOUR DISPENSER OPERATING IN TOP NOTCH CONDITION.

SHOULD YOU FAIL TO FIND WHAT YOU ARE LOOKING FOR, IF YOU NEED TO DISCUSS UNIQUE PARTS OR OPERATION OF YOUR DISPENSER,PLEASE CONTACT OUR CUSTOMER SERVICE STAFF AT 1-866-323-2777.

INFORMATION CONCERNING THE INSTALLATION, OPERATION, AND SERVICE FOR THE 352 DISPENSER CAN BE FOUND IN THE 24-2058-0002 MANUAL ON THE FBD WEB SITE AT WWW.FBDFROZEN.COM.

YOUR COMMENTS CONCERNING THIS CATALOG ARE ALSO WELCOME.

2

HOW TO PURCHASE PARTS IF NECESSARYPurchase orders may be faxed direct to 1-210-637-2832, or e-mailed to [email protected]

Monday - Friday

7:00 a.m. - 5:30 p.m. Central Time

Ph 1-210-637-2800

FAX 1-210-637-2832

Toll Free 1-866-323-2777

NOTES

Please contact FBD Technical Support at 1-866-323-2777 for assistance.

TABLE OF CONTENTS

HOW TO ORDER PARTS IF NECESSARY .....................................................................................................2TABLE OF CONTENTS .....................................................................................................................................31. ILLUSTRATIONS, PARTS LISTINGS, AND DIAGRAMS ..........................................................................4

1.1 EXPANSION TANK ASSEMBLY .......................................................................................................41.2 SOLUTION MODULE ASSEMBLY ....................................................................................................41.3 PUMP REGULATOR ASSEMBLY .....................................................................................................51.4 DISPENSING NOZZLES AND FACE PLATE ASSEMBLIES .........................................................6-71.5 KITS, DDV DISPENSING NOZZLE ................................................................................................8-91.6 KITS, SDV DISPENSING NOZZLE .................................................................................................101.7 BEATER BAR ASSEMBLY ..............................................................................................................111.8 GEAR ASSEMBLY MOTOR ............................................................................................................111.9 ELECTRICAL BOX ASSEMBLY ......................................................................................................121.10 CONTROLLER BOARD ASSEMBLY ..............................................................................................131.11 COMPRESSOR ASSEMBLY ...........................................................................................................141.12 REFRIGERATION TUBE LOCATIONS ...........................................................................................151.13 CONDENSER COIL, FILTER AND FAN/SHROUD ASSEMBLY ....................................................161.14 DOOR ASSEMBLY, LED .................................................................................................................171.15 PANEL ASSEMBLIES (TOP, REAR, AND SIDES) AND FRONT ASSEMBLY .........................18-19

3


4

1. ILLUSTRATIONS, PARTS LISTINGS, AND DIAGRAMS

1.1 EXPANSION TANK ASSEMBLY

1

2

ITEM PART NO. DESCRIPTION QTY

R 1 38-2004-0001 Expansion Tank 2R 2 17-3130-0001 Mounting Bracket, 2

352 Expansion Tank R in margin indicates change or revision

1

2

3

4

5

1.2 SOLUTION MODULE ASSEMBLY


1 12-2867-1003 Solution/Gas Module 1Assy

2 46-2010-0001 Solenoid, Header 1 3 12-2681-0100 Pressure Transducer 3 4 38-0131-0002 Pressure Gage 1 5 38-2006-0001 Regulator 1 R in margin indicates change or revision



1.3 PUMP REGULATOR ASSEMBLY

31

4

2


1 17-3131-0001 Mounting Bracket 1H2O Pump

2 34-2030-0001 Pump, Water Booster, 1 3 38-2007-0002 Pressure Regulator, 1 4 12-2787-0352 Active Charge Regulator 1

w/Fittings and PressureTap

5

6

1.4 DISPENSING NOZZLES AND FACE PLATE ASSEMBLIES

1

3

4

7

6

5

2


8

3

4

7

6

5

2

ADA DDV Dispensing Nozzle

SDV Dispensing Nozzle

NOTE:The 352 Dispenser requires 2 Assemblies

9

3

4

7

6

5

2DDV Dispensing Nozzle


7


R 1 12-2747-0004 ADA DDV Assy, 1Molded (FCB)

R -- 12-2747-0005 ADA DDV Assy, 1Molded (FUB)

R 2 40-0101-0001 O-Ring 2 3 12-0253-0010 Face Plate, 1

Relief Valve 4 19-0161-0001 Face Plate, 1

Clear AcrylicR 5 18-0616-0001 Retaining Ring, 2

ExternalR 6 40-0101-0002 Face, O-Ring 1 7 19-0186-0001 Bushing, Face Plate/ 1

Beater BarR 8 12-2944-0001 FBD Dispensing Valve, 1

Side Action, SDVR 9 12-2747-0001 DDV Assy, Molded 1

(FCB)R -- 12-2747-0002 DVD Assy, Molded 1

(FUB)- - - - - - - - - - - - - - - -

Fully Assembled DDV Valve AssembliesR -- 12-0251-0001 Fully Assembled (FCB) 1

DDV with FaceplateR -- 12-0251-0002 Fully Assembled (FUB) 1

DDV with FaceplateR -- 12-0251-0003 Fully Assembled (FCB) 1

ADA DDV with Faceplate

R -- 12-0251-0005 Fully Assembled (FUB) 1ADA DDV withFaceplate

Fully Assembled SDV Valve AssembliesR -- 12-0251-0110 Fully Assembled SDV 1

with Faceplate

R in margin indicates change or revision

1.4 DISPENSING NOZZLES AND FACE PLATE ASSEMBLIES (CONTINUED)

8

1.5 KITS, DDV DISPENSING NOZZLE

MINOR REBUILD KIT, DDV

12-2747-0011 Minor Rebuild Kit, FCB, DDV 12-2747-0012 Minor Rebuild Kit, FUB, DDV


MINOR REBUILD KIT, ADA DDV

12-2747-0032 Minor Rebuild Kit, FCB, ADA DDV 12-2747-0033 Minor Rebuild Kit, FUB, ADA DDV

9

1

2

3

4

5


R 1 12-2747-0011 Stem Assy, Kit, Molded 1FCB, DDV

R -- 12-2747-0012 Stem Assy, Kit, Molded 1FUB, DDV

R 2 40-0101-0003 O-Ring, 2-117 (Buna-N) 1R 3 40-0433-0003 O-Ring, 2-201, EPDM, 1

90 Durometer (FCB)R -- 40-2069-0001 O-Ring, 2-108, EPDM 1

(FUB)R 4 19-0202-0003 Diffuser, Dispense Valve 1R 5 48-0105-0002 Spring, Conical, Molded 1

DDV



1.5 KITS, DDV DISPENSING NOZZLE (CONTINUED)

6

3

2

4

5

MAJOR REBUILD KIT, DDV

12-2747-0021 Major Rebuild Kit, FCB, DDV 12-2747-0022 Major Rebuild Kit, FUB, DDV

MAJOR REBUILD KIT, ADA DDV

12-2747-0034 Major Rebuild Kit, FCB, ADA DDV 12-2747-0035 Major Rebuild Kit, FUB, ADA DDV


R 6 12-2747-0032 Stem Assy, Kit, Molded 1ADA DDV FCB

R -- 12-2747-0033 Stem Assy, Kit, Molded 1ADA DDV FUB


NOTE:Items 1 and 3 are the only parts which are different in the FCB DDV and FUB DDV

10

1

2

3

CONTENTSOF KIT

1.6 KITS, SDV DISPENSING NOZZLE

MINOR KIT, MOLDED, SDV. 12-2944-0020

MAJOR REBUILD KIT, MOLDED SDV, 12-2944-0030


-- 28-2001-0002 Lubricant, Dow 111 AR -- 19-2445-0001 O-Ring Pick 1 1 40-2064-0001 O-Ring, 2-210 1

(EDPM-InternallyLubricated)

2 40-2078-0001 O-Ring, 2-209 1(Internally Lubed)

3 40-2065-0003 O-Ring, Quad 2-207 1 4 18-2325-0001 Set Screw, Pilot/Dog, 1

5/16-18X3/8, SS 5 12-2946-0001 Stem Assy, 1

Side Action Valve



4

5CONTENTS

OF KIT

11

1.7 BEATER BAR ASSEMBLY

1

3

2


R 1 12-2109-0001 Beater Bar ARR 2 19-0100-0010 Scraper Blade ARR 3 40-0301-0003 Seal, Rear, Black AR


1.8 GEAR MOTOR ASSEMBLY



1 12-2360-0004 Gear Motor with ARCoupling, 115V/60Hz

-- 12-2078-0001 Gear Motor with ARCoupling, 220V/50Hz

R 2 14-2061-0002 Capacitor, 16uF, 115V ARR -- 14-0484-0001 Capacitor, 4uF, 220V AR 3 12-1151-0001 Assy, Ceramic Coupler ARR 4 17-0511-0002 Key, Motor Shaft AR




4

3 2

1

NOTE:The Beater Bar Assy (PN 12-2085-0001) includes Items 1 and 2 only.

12

1.9 ELECTRICAL BOX ASSEMBLY

4

3

6

8

1

5 7

2


1 17-3083-0001 Electrical Box 1 2 12-0542-0350 Controller Board Assy, 1 3 14-0391-0001 Contactor, 2 Pole, 1

30 Amp 4 14-2225-0001 Transformer, 115/220V, 1

Pri, 24V Sec 5 14-2226-0002 Relay, 115V/60Hz 1 -- 14-2226-0003 Relay, 220V/50Hz 1 6 14-2102-0001 Fuse Holder 1 7 14-2227-0002 Capacitor, Start, 1

115V/60Hz -- 14-2227-0003 Capacitor, Start, 1

220V/50Hz 8 14-2228-0002 Capacitor, Run, 1

115V/60Hz -- 14-2228-0003 Capacitor, Run, 1

220V/50Hz

R in margin indicates change or revisionPlease contact FBD Technical Support at 1-866-323-2777 for assistance.

13

1.10 CONTROLLER BOARD ASSEMBLY

1

2 3

4


1 70-2142-0001 Keypad, Membrane 1 2 17-3083-0002 Keypad Cover 1 3 12-0551-0006 Controller Board, 1

LCD Display Panel(English)

-- 16-0351-0005 Controller Board, 1LCD Display Panel(Simplified Chinese/Eng)

-- 16-0351-0010 Controller Board, 1LCD Display Panel(Japanese)

4 70-2145-0001 Controller Board 1Assy



14


1.11 COMPRESSOR ASSEMBLY

COMPRESSOR KIT PART NUMBERS

12-2952-0004 Compressor Kit,115V/60Hz

12-2952-0005 Compressor Kit,220V/50Hz

The following items are included in the Compressor Kits listed above:ITEM PART NO. DESCRIPTION QTY

1 36-2079-0002 Compressor, 1115V/60Hz

- 36-2079-0003 Compressor, 1220V/50Hz

2 12-3163-0001 Mounting Hardware 1Kit, Compressor


2

1

15

3

2

8

6

4

7

1

5

10

9

11


1 36-2006-0001 Receiver 1 2 46-0100-0006 Solenoid , Hot Gas Body 3 3 46-0100-0007 Solenoid , Hot Gas Coil 3 4 52-2018-0001 3/8” Shut Off Valve 2

Assy (COIN), Straight 5 36-0156-0001 Core Style, Liquid Line 1

Filter, Dryer 6 52-2018-0003 3/8” Front Sealing 1

Shut-Off Valve


1.12 REFRIGERATION TUBE LOCATIONS


7 70-0291-0003 Temperature Sensor 1 8 46-2014-0001 Expansion Valve 2 9 22-2404-0005 Fitting, SS Barrel 2R 10 12-3155-0001 Motor Plate Assembly 2 11 12-0501-0007 Freeze Pack Assy, 1

SS Barrels R in margin indicates change or revision

16

1.13 CONDENSER COIL, FILTER AND FAN/SHROUD ASSEMBLY

2

1

3


1 36-2020-0001 Condenser, with 1Filter Holder, 352

2 30-2009-0002 Fan, with Finger Guard, 1115V, 60/50Hz

-- 30-2009-0003 Fan, with Finger Guard, 1220V, 50Hz

3 20-2006-0002 Filter, Air (1618 Mesh) 1



17

5

3

22

41

1.14 DOOR ASSEMBLY, LED


1 12-2932-3113 Assy, Bezel, with 2Sold Out Light, 2VDC

2 14-2222-0001 LED Module Bar with 6Connectors

3 18-2396-0005 PCB Standoff, Reverse 14Locking, RICHCO

4 18-2396-0004 Rivet, Nylon, LED Arrow 3Clip

5 19-2387-0001 Graphic Diffuser, Door, 1



18

1.15 PANEL ASSEMBLIES (TOP, REAR, AND SIDES) AND FRONT ASSEMBLY

13

12

11

14

8

9

10

6

7

45

3

2

1


19

1.15 PANEL ASSEMBLIES (TOP, REAR, AND SIDES) AND FRONT ASSEMBLY (CONTINUED)

FBD352 DISPENSER PARTSITEM PART NO. DESCRIPTION QTY

1 12-2312-0002 Panel Assy, Rear 1 2 12-2329-0003 Top Panel Assy 1 3 12-2313-0003 Panel Assy, Left Side, 1 4 12-2314-0003 Panel Assy, Right Side 1 5 17-3110-0001 Cover, Drip Tray 1 6 17-3055-0001 Bracket, RT Drip 1

Tray Support 7 17-3055-0002 Bracket, LT Drip 1

Tray Support 8 17-3052-0004 Cup Rest, Drip 1

Tray 9 19-2389-0001 Drip Tray, Plastic 1 10 17-3110-0002 Cover, Fluid Tray, 352 1 11 17-0367-0001 Freeze Pack Cover 1 12 12-0251-0001 Fully Assembled FCB 1

Dispense Valve Assy,with Faceplate

-- 12-0251-0002 Fully Assembled FUB 1Dispense Valve Assy,with Faceplate

-- 12-0251-0110 Fully Assembled SDV 1Dispense Valve Assy,with Faceplate

13 18-0921-0001 Face Plate Knob 8 14 24-2141-0001 Domed Label, “FBD” 1



4th Draft-Corrected - 24-2058-0003-Rev 03 · fbd part number: 24-2058-0003 notice: ... for the 352...

Documents

Transcript of 4th Draft-Corrected - 24-2058-0003-Rev 03 · fbd part number: 24-2058-0003 notice: ... for the 352...