4K UPXD - LYNX Technik
4
www.lynx-technik.com LYNXTechnik AG | Broadcast Television Equipment Features Description The greenMachine 4KUPXD is a broadcast-quality video processing unit that has a single channel up/down/cross converter with a frame synchronizer supporting formats up to 4K UHD (3840 x 2160). It includes full audio processing capabilities, scalars for the spatial conversion of the video signals including versatile region of interest (ROI) selection, and high-performance deinterlacer. It also supports 4x3G (2SI Quad link) or 12G SDI (single link) inputs and outputs for 4K UHD signals. With 2SI quad-link <> single link conversion, signals can be interchanged in between the single link and 2SI quad links. The greenMachine 4KUPXD system comes with a fully-featured local control interface with LCD which displays image previews and audio level meters of the processed video paths in addition to the graphical user interface called greenGUI. It is also supported by the Nova controller which enables the module to be remotely controlled and monitored via third party master control software. 4K UPXD Embedder/De-embedder: A multi-format audio embedder and de-embedder provides access to all the channels in the input SDI and allows shuffling and embedding them to the output(s). Audio Processing: It provides gain adjustment, mute, inversion, and stereo to mono-mix on each mono audio channel including silence and overload monitoring. It has a 1khz test signal as well. Dolby E® decoder: Two Dolby E® decoders can be used to decode all 8 channels contain in a Dolby E® stream. The Dolby® metadata can be mapped to VANC acc. to SMPTE 2020-3 and SMPTE 2020-2. MADI in/out: This provides a MADI input and output. All incoming MADI signals are routed to the internal audio crossbar. The outgoing MADI signal can be completely re-arranged in the internal audio crossbar. Basic Audio & Video Test Generator: The test generator is a basic audio & video test signal generator with a wide range of still video test patterns. It can be configured to work in conjunction with the frame synchronizer to output a test pattern on TRS errors. Timing: Each video and AES audio channel can be individually delayed. The available video delay per channel is 30 frames and the audio delay is 1.3 second per AES audio channel. greenGUI: greenGUI is a control software that provides remote control and status monitoring and event (error) reporting for all the greenMachines installed on a network. Nova Controller: It adds full SNMP v2 along with LYNX IP remote control protocol functionality to the system. It enables CustomControl feature that allows user to design customized control panels for a computer, giving specific simplified user- specific controls. Processing Channels: One channel supporting format up to 4K UHD with 2SI quad-link <>single link conversion. 4K/3G-Scaler: A spatial converter with a powerful region of interest (ROI) selection and scaling. Conversion Mode supported: Pillar box/Letterbox, Center cut, 14:9 conversion, stretch to fill, and Custom ROI Deinterlacer: The de-Interlacer will perform broadcast/quality deinterlacing for incoming interlaced SD and HD video formats and applies motion adaptive filtering resulting in superb image quality. Motion adaptive filtering: Motion adaptive filtering allows deinterlacer to create a sequence of output frames at the same rate as the sequence of input fields eliminating feathering or flickering artefacts. 3G level A/B: It provides automatic detection of 3G level A/B and allows 3G level A <> 3G level B dual link conversion. (3G level A acc. to SMPTE ST425-1/4:2:2, 10Bit) Frame Synchronizer: One of the best synchronizers in the industry utilizing external ref. with a robust “flywheel” function for the synchronization of SDI sources. All embedded audio is extracted and delayed automatically to match the video processing delay, then embedded via a matrix into the SDI output. Metadata Management: This functionality manages the embedded metadata in the video signals. Time code, Closed captions, and Teletext can be monitored and/or converted. Video Adjustment: It includes saturation, gain black and hue adjustments, blanking interval deletion and aperture correction. It additionally provides a horizontal flip and YCrCb headroom clipping functionality. Color Matching: It provides adjustment in gain and offset for red, green and blue (RGB) and also cyan, magenta, yellow, and black (CMYW). SDI 1 SDI 2 SDI 3 SDI 4 Fiber 3G Fiber 12G Signals HDMI Ext. Audio Video Proc Audio Bus Misc. APPs System Panel Lock Back F1 F2 F3 I/O Monitoring Configuration Configuration Function PS1 PS1 REF LAN greenMachine greenMachine
Transcript of 4K UPXD - LYNX Technik
www.lynx-technik.comLYNXTechnik AG | Broadcast Television Equipment
Features
DescriptionThe greenMachine 4KUPXD is a broadcast-quality video processing unit that has a single channel up/down/cross converter with a frame synchronizer supporting formats up to 4K UHD (3840 x 2160). It includes full audio processing capabilities, scalars for the spatial conversion of the video signals including versatile region of interest (ROI) selection, and high-performance deinterlacer. It also supports 4x3G (2SI Quad link) or 12G SDI (single link) inputs and outputs for 4K UHD signals. With 2SI quad-link <> single link conversion, signals can be interchanged in between the single link and 2SI quad links. The greenMachine 4KUPXD system comes with a fully-featured local control interface with LCD which displays image previews and audio level meters of the processed video paths in addition to the graphical user interface called greenGUI. It is also supported by the Nova controller which enables the module to be remotely controlled and monitored via third party master control software.
4K
4K UPXD
Embedder/De-embedder: A multi-format audio embedder and de-embedder provides access to all the channels in the input SDI and allows shuffling and embedding them to the output(s).
Audio Processing: It provides gain adjustment, mute, inversion, and stereo to mono-mix on each mono audio channel including silence and overload monitoring. It has a 1khz test signal as well.
Dolby E® decoder: Two Dolby E® decoders can be used to decode all 8 channels contain in a Dolby E® stream. The Dolby® metadata can be mapped to VANC acc. to SMPTE 2020-3 and SMPTE 2020-2.
MADI in/out: This provides a MADI input and output. All incoming MADI signals are routed to the internal audio crossbar. The outgoing MADI signal can be completely re-arranged in the internal audio crossbar.
Basic Audio & Video Test Generator: The test generator is a basic audio & video test signal generator with a wide range of still video test patterns. It can be configured to work in conjunction with the frame synchronizer to output a test pattern on TRS errors.
Timing: Each video and AES audio channel can be individually delayed. The available video delay per channel is 30 frames and the audio delay is 1.3 second per AES audio channel.
greenGUI: greenGUI is a control software that provides remote control and status monitoring and event (error) reporting for all the greenMachines installed on a network.
Nova Controller: It adds full SNMP v2 along with LYNX IP remote control protocol functionality to the system. It enables CustomControl feature that allows user to design customized control panels for a computer, giving specific simplified user-specific controls.
Processing Channels: One channel supporting format up to 4K UHD with 2SI quad-link <>single link conversion.
4K/3G-Scaler: A spatial converter with a powerful region of interest (ROI) selection and scaling. Conversion Mode supported: Pillar box/Letterbox, Center cut, 14:9 conversion, stretch to fill, and Custom ROI
Deinterlacer: The de-Interlacer will perform broadcast/quality deinterlacing for incoming interlaced SD and HD video formats and applies motion adaptive filtering resulting in superb image quality.
Motion adaptive filtering: Motion adaptive filtering allows deinterlacer to create a sequence of output frames at the same rate as the sequence of input fields eliminating feathering or flickering artefacts.
3G level A/B: It provides automatic detection of 3G level A/B and allows 3G level A <> 3G level B dual link conversion. (3G level A acc. to SMPTE ST425-1/4:2:2, 10Bit)
Frame Synchronizer: One of the best synchronizers in the industry utilizing external ref. with a robust “flywheel” function for the synchronization of SDI sources. All embedded audio is extracted and delayed automatically to match the video processing delay, then embedded via a matrix into the SDI output.
Metadata Management: This functionality manages the embedded metadata in the video signals. Time code, Closed captions, and Teletext can be monitored and/or converted.
Video Adjustment: It includes saturation, gain black and hue adjustments, blanking interval deletion and aperture correction. It additionally provides a horizontal flip and YCrCb headroom clipping functionality.
Color Matching: It provides adjustment in gain and offset for red, green and blue (RGB) and also cyan, magenta, yellow, and black (CMYW).
SDI 1 SDI 2
SDI 3 SDI 4 Fiber3G
Fiber12G
Signals HDMI Ext.Audio
VideoProc
AudioBus
Misc.
APPs
System
PanelLock Back
F1
F2
F3
I/O Monitoring Configuration Configuration Function
PS1
PS1
REF
LAN
gree
nMac
hine
greenMachine
Functional Diagram
Example 1: HD-SDI to 4K-SDI up-conversion
Example 2: 4K-SDI to HD-SDI down-conversion
Input
CAMERA CAMERA
Output
SDI 1 SDI 2
SDI 3 SDI 4 Fiber3G
Fiber12G
Signals HDMI Ext.Audio
VideoProc
AudioBus
Misc.
APPs
System
PanelLock Back
F1
F2
F3
I/O Monitoring Configuration Configuration Function
PS1
PS1
REF
LAN
gree
nMac
hine
greenMachine
Format: 2160p/59.94Format: 1080i/59.94 4K | UPXD
CAMERA CAMERA 1
SDI 1 SDI 2
SDI 3 SDI 4 Fiber3G
Fiber12G
Signals HDMI Ext.Audio
VideoProc
AudioBus
Misc.
APPs
System
PanelLock Back
F1
F2
F3
I/O Monitoring Configuration Configuration Function
PS1
PS1
REF
LAN
gree
nMac
hine
greenMachine
Format: 2160p/59.94Format: 1080i/59.944K | UPXD
Input Output
SDI Inputs 3x 3G SDI video on 75 Ohm BNC connector - SMPTE, 292M, 424M, 259M with automatic video format and standard detection
Return Loss: >15dB from 5MHz to 1.5GHz, >10dB from 1.5GHz to 3GHz
Automatic cable EQ (Belden 1694A): 340m@270Mbit/s, [email protected]/s, [email protected]/s
12G SDI Input 1x 12G SDI video on 75 Ohm BNC connector - SMPTE 292M, 424M, 259M, 2081, 2082with automatic video format and standard detectionReturn Loss: same as 3G SDI; >7dB to 6GHz; >4dB to 12GHz
HDMI Input / Output
1x 10 bit HDMI 4K/UHD 1.4b
Optical I/O (Optional)
1x 3G SDI SFP Transceiver (SMPTE 297M - 2006)1x 12G SDI SFP Transceiver (SMPTE 292M, 424M , 2081 2082) - no SD SDI (270MBit)
Ethernet (LAN) 1x 10/100/1000 BaseT RJ45 Connector
Optical Ethernet (Optional)
IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fiber at 1 Gbit/s (125 MB/s)
GPI I/O 4x general purpose inputs + 4x general purpose outputs - RJ45 Connectors
Reference Input 1x analog video reference on 75 Ohm BNC connector
Analog bi-level (SDTV) or tri-level (HDTV) auto detect
SDI Output 3x SDI video on 75 Ohm BNC connector (SMPTE, 292M, 424M, 259M)
Timing jitter: < 0.2 UI @ 270Mbit/s, < 1.0 UI @ 1.5Gbit/s, < 2.0 UI @ 2.97Gbit/s
Alignment jitter: < 0.2 UI @ 270Mbit/s, < 0.2 UI @ 1.5Gbit/s, < 0.3 UI @ 2.97Gbit/s
Return Loss: >15dB from 5MHz to 1.5GHz, >10dB from 1.5GHz to 3GHz
12G SDI Output 1x 12G SDI video on 75 Ohm BNC connector - SMPTE 292M, 424M, 259M, 2081, 2082Return Loss: same as 3G SDI; >7dB to 6GHz; >4dB to 12GHz
Serial Data EIA/ETA RS232C / RS422 /RS 485 (selectable through greenGUI) - RJ45 connectorESD protection for up to 16kV
Reference Output 1x analog video reference on 75 Ohm BNC connector
Analog bi-level (SDTV) or ri-level (HDTV), cross lock capa-bility
Audio I/O 4x input and 4x output on Sub-D 25 female connector
Analog: input impedance >10k Ohm, Output Impedance 150 Ohm
Analog I/O full scale level: selectable 12, 15, 18, 20, 22, 24 dBu
Digital: AES3 balanced transformer isolated; Digital output level: 4V peak to peak nom
Power 12VDC @ 45W nominal (supports 7 - 24VDC input range)
2x power connections for redundant power supply
Mechanical W: 218mm (1/2 19”), H: 44mm (1.75”), D: 225mm (8.86”) - including connectors. Weight: 1.4kg (3.09lb)
Ambient Temperature: 5°C to 40°C (41°F to 104°F) maintaining specification
Humidity: 90% maximum, non-condensing
Model # GMPT 4KUPXD EU- (EAN# 4250479325784)
GMPT 4KUPXD UK- (EAN# 4250479325791)
GMPT 4KUPXD US- (EAN# 4250479325807)
Includes greenMachine Titan: GM68404K UPXD Constellation: GMC-4KUPXDPrimary Power Supply: R PS 6120 with EU/UK/US power cord
Hardware Specifications
Supported SDI Formats Other Broadcast ApplicationsSDTV Formats 525 / 59.94Hz
625 / 50Hz
HDTV Formats 1080i / 50Hz1080i / 59.94Hz1080i / 60Hz1080p / 23.98Hz1080p / 24Hz1080p / 25Hz1080p / 29.97Hz
1080p / 30Hz1080psf /23.98Hz1080psf / 24Hz1080psf / 25Hz720p /23.98 Hz720p / 24Hz720p / 25Hz
720p / 29.97Hz720p / 30Hz720p / 50Hz720p / 59.94Hz720p / 60Hz
3GBit/s FormatsLevel A and B
1080p / 50Hz1080p / 59.94Hz1080p / 60Hz
12GBit/s FormatsSingle Link
3840 x 2160p / 50Hz3840 x 2160p / 59.94Hz3840 x 2160p / 60Hz
12GBit/s FormatsQuad Link 2SILevel A and B(4 x 3Gbit/s)
3840 x 2160p / 50Hz3840 x 2160p / 59.94Hz3840 x 2160p / 60Hz
• GMC-HDR-EVIE: Dynamic HDR > SDR converter
• GMC-HDR-Static: Static HDR <> SDR converter
• GMC-TESTOR: Audio & Video Test signal generator in 4K UHD or Quad 3G mode including HDR test patterns
• GMC-3GUPXD: 3G Up/down/cross converter
• GMC-Quad3G-FS: 4x3Gbit/s Frame Synchronizer
• GMC-BiDi-Transport: Bi-directional Transport (requires two greenMachine working in Master & slave configuration.
*The greenMachine hardware can be configured for a different broadcast application independent of 4KUPXD via the purchase of perpetual licenses and application deployment on the greenMachine.
www.lynx-technik.comLYNXTechnik AG | Broadcast Television Equipment
Ordering InformationGMPT 4KUPXD EU 4K UHD Up/Down/Cross-converter +
Frame synchronizer EUEAN: 4250479325784
GMPT 4KUPXD UK 4K UHD Up/Down/Cross-converter + Frame synchronizer UK
EAN: 4250479325791
GMPT 4KUPXD US 4K UHD Up/Down/Cross-converter + Frame synchronizer
EAN: 4250479325807
GMC-HDR-EVIE-titan Dynamic HDR > SDR converter EAN: 4250479326187
GMC-HDR-STATIC Static HDR <> SDR converter EAN: 4250479326118
GMC-quad3G-FS 4x3Gbit/s Frame Synchronizer EAN: 4250479326057
GMC-3GUPXD Dual 3G Up/Down/Cross Converter + Dual Scaler
EAN: 4250479326521
GMC-4KUPXD 4K Up/Down/Cross Converter EAN: 4250479326064
GMC-TESTOR-titan Audio Video Test Signal Generator EAN: 4250479326101
GMC-BiDi-Transport Bi-directional Transport EAN: 4250479326088
R FR 6000 1 RU 19” Rack Mount Chassis EAN: 4250479324466
RXT6001 19” Rack Frame Extension for RFR 6000 EAN: 4250479326507
R PS 6120 EU Desk Power supply with EU cord EAN: 4250479324343
R PS 6120 UK Desk Power supply with UK cord EAN: 4250479324350
R PS 6120 US Desk Power supply with US cord EAN: 4250479324367
OptionsRFR 6000 - 1RU 19” Rack Mount Chassis
ABS Case for greenMachine
RPS 6120 - Redundant Power Supply
For greenMachine the following regulatory and safety standards apply: CE: EN 55103-1/1996, EN 55103-2 /1996, EN 60950-1/2006 Following the provisions of 2004/108/EC and 2006/95/EC directives.
FCC: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15, Subpart B of the FCC Rules.
The RPS 6120 power supply (EA11011H-120) complies with the following safety standards: UL, CCC, PSE
RXT6001 19” Rack Extension for RFR 6000
One greenMachine in Rack Mount
Fiber Options
Rack mounting hardware which can accommodate one or two greenMachines in 1RU of rack space which also securely mounts the power supplies.Note: Two power supplies can be mounted onto one RFR 6000. Please see more information in the RFR 6000 quick reference guide.
The greenMachine is ideally suited for standalone applications but this powerful processing platform reaches its full potential when used within a system design.The RXT 6001 is a compact and flexible rack extension for RFR 6000. It can be setup to hold up to four RPS 6120 power supplies.
The transport case is perfect to keep your greenMachine®, cables and documents organized and in one place, while also protecting it from enviromental influences. With it’s study design, our ABS Case is the ideal partner to transport your greenMachine® whenever it is not wired in a rack, standalone or any other system you can think of. The hard shell case protects your greenMachine® from most impacts in an average, busy work environment, while the inner foam coating prevents it from being scratched by cables, connectors or other equipment that can also be stored inside the case. The foam pocket inside the top lid of the case is ideal for storing quick reference guide, notes or any documentation.
The second external in line power supply for redundant power protection.
RXT 6001 installed in RFR 6000
Basic 3G SDI Video Fiber Transmitter Power
OH-TX-1-Y-LC/ST/SC SDI Fiber TX SFP - LC/SC or ST - 1310nm -5dBm
Basic 3G SDI Video Fiber Receiver Sensitivity
OH-RX-1-LC/ST/SC SDI Fiber RX SFP - LC/SC or ST - 1270-1610nm -16dBm
Basic 3G SDI Video Fiber Transceiver Power / Sensitivity
OH-TR-1-LC SDI Fiber Transceiver, Singlemode - LC - 1310nm -5dBm -18dBm
OH-TR-0-850-MM SDI Fiber Transceiver, Multimode - LC - 850nm -5dBm -15dBm
12G SDI Video Fiber(support 1.5G/3G/6G and 12G SDI)
Power / Sensitivity
OH-TR-12G-LC 12G SDI Fiber Transceiver, Singlemode - LC - 1310nm
-5dBm -12dBm
OH-TX-12G-LC 12G SDI Fiber Transmitter, Singlemode - LC - 1310nm -5dBm –
OH-RX-12G-LC 12G SDi Fiber Receiver, Singlemode - LC – -12dBm
CWDM SDI Video Fiber Transmitter (TX) and Transceiver (TR)(12G variants support 1.5G/3G/6G and 12G SDI)
Power / Sensitivity
OH-TR-12G-XXXX-Y-LCXXXX = Wavelength
12G SDI Fiber Transceiver - CWDM capable - 10km* - LC17 wavelengths acc. to ITU T G692.2 1270nm through 1590nm.
-2...+3 (dBm)
-10dBm (6G,12G)
-14dBm (1.5G,3G)
OH-TX-12G-XXXX-LCXXXX = Wavelength
12G SDI Fiber Transmitter - CWDM capable - 10km* - LC8 wavelengths acc. to ITU T G692.2: 270nmn-1330nm & 1550nm-1610nm
-3dBm –
OH-TX-4-XXXX-Y-LCXXXX = Wavelength
SDI Fiber Transceiver, Singlemode - CWDM capable - 40km* - LC18 wavelengths acc. to ITU T G692.2: 1270nm through 1610nm.
-1dBm –
12G SDI Video Fiber Bidirectional Transceiver (support 1.5G/3G/6G and 12G SDI)
Power / Sensitivity
OH-BD-12G-1270-LC SDI Fiber Bidirectional Transceiver - WDM capable - 10km* - LCOH-BD-12G-1330-LC required at opposing end
-3...+3dBm
-10dBm (6G,12G)
-14dBm (1.5G,3G)
OH-BD-12G-1330-LC SDI Fiber Bidirectional Transceiver - WDM capable - 10km* - LCOH-BD-12G-1270-LC required at opposing end
-3...+3dBm
-10dBm (6G,12G)
-14dBm (1.5G,3G)
Basic Ethernet Fiber Transceiver Power / Sensitivity
OH-TR-51-LC Ethernet Fiber Transceiver, Singlemode - 10km* - LC - 1310nm
-3dBm -21dBm
CWDM Ethernet Fiber Transceiver Power / Sensitivity
OH-TR-54-XXXX-LCXXXX = Wavelength
Ethernet Fiber Transceiver, Singlemode - CWDM capable - 40km* - LC18 wavelengths acc. to ITU T G692.2 1270nm through 1610nm.
0dBm -21dBm
* Distance is an approximation. Actual distances achieved can be longer or shorter depending on the type of
fiber cable and accumulated optical losses in the fiber link. Determine link losses and perform optical budget calculations to ensure correct operation.
More SFP options are available.
