Contact usAddress: 100 civic Center Plaza, Lompoc, CA, 93436Phone: 805-875-8750www.cityoflompoc.com/lompocnetEmail:broadband@ci.lompoc.ca.us

1: Identify the nearest or desired Access Point (F) and mounting point.2: Strategically mount the Nanostation (A) outside the structure facing the desired Access point (F) (Note: Avoid obstruction between the nanostation (A) and the access point (F)}3: Plug the Outdoor Cat5 cable (B) into the Main Port on the Nanostation (A), and run the other end of cable (B) through the penetration and leave near a power outlet of your choice. penetration and leave near a power outlet of your choice.5: Plug cable (B) into the port labeled POE on the adapter, and plug power cord into power outlet.6: Adjust outside nanostation (A) in desired direction for maximum signal strength, meanwhile, pay attention to the last 4 LEDs on the back of the Nanosation (A). (MORE LIGHTS = STRONGER SIGNAL)7: Plug cable (D) into customer device (E) & Test internet connectivity8:8: THATS IT....ENJOY SURFING THE WEB!!

Setup Instructions

Access Point or PTMP (F)

Note: Structural Penetration must be available, to connect the (outdoor)

nanostation to the (indoor)POE adapter .

(C) Indoor POE adapter & power cord. The adapter has two Cat5 ports, the POE port and the LAN port

(D) Cat5 Cable

(B) Cat5 Cable (outdoor/ shielded cable is preferred)

(E) Customers device: xbox, laptop, router, etc

(A) Outdoor NanoStation