45 Oak Road, Kyalami AH, Midrand, Gauteng, South AfricaP O Box 4298, Rivonia, 2128Tel: +27(0) 10 020 0292 /3/4

Fax: +27(0) 11 466 9197e-Mail: thermal@etsystems.co.zaWebsite: www.etsystems.co.za

Reg No. 1994/002570/07

2

Who are we?

ETS is a company that designs and builds Industrial Furnaces, offering other specialist furnace related products, Flare Systems and Gasholders.

How long have we been around? We have a 20 Year track record and the nucleus of our team has however been together for over 30 years.

What equipment do we supply?

Steel Industry � Reheat furnaces for billet, bar, rod and slab.

� Stainless Steel strip annealing, plate, etc.

� New furnace and/or revamps.

� Alloy Dry Skids for pusher furnace hearth.

� Pre-cast refractory components.

� Combustion systems.

� Instrumentation and computer optimization.

� Recuperators from Peiler Montanwärme.

� Refractory and ceramic fibre – design and installation

� .Electric heating elements and systems.

� Machines used for charging and discharging

Car Bottom Bogie Furnaces

3

Aluminum Industry

� Equipment as per Mechatherm International

range.

� Heat treatment.

� Melting.

� Extrusions.

� Machines.

General Purpose Heat Treatment

� Top Hat Furnaces (Electric / Gas / Fuel Oils).

� Bogie Furnaces (Electric / Gas / Fuel Oils).

� Roller Hearth furnaces for Plate Heat Treatment.

� Tube Heating Furnaces.

� Spring Heating / Tempering for coil / leaf springs for motor industry.

Pusher Reheat Furnace

Aluminium Melting

4

Who are our major clients?

� Hulamin & Hulamin Extrusions

� Hulett Hydro

� Arcelor Mittal

o Vanderbijlpark

o Vereeniging

o Newcastle

� Highveld Steel and Vanadium Corporation

� Columbus Stainless

� SCAW Metals Group

� Gape Gate – Bar Mill & Rod Mill

� Billiton – Bayside and Hillside Aluminum

� CISCO – Cape Town

� Metso Minerals – Isithebe

� Afrox

� ESKOM

� Anglo Coal; New Denmark Colliery

� Group 5

� Petro SA

5

Recuperators

Design and manufacture of Recuperators by Peiler Montanwärme.

Engineered Thermal Systems will oversee the installation and

commissioning of the recuperators.

Alloy Dry Skids for Pusher Furnace Hearths Skid Pipes and Pre-cast Skid Insulation Extend the life of your hearth using our Alloy Dry Skids. Supply of most grades and sizes of Furnace Water-Cooled Skid Pipes.

Manufacture and installation of Pre-cast Skid Insulation for furnace skid pipes.

6

FLARE SYSTEMS

Engineered Thermal Systems are representative agents for Flare Industries from USA, Austin Texas and offer a wide variety of Flaring

Systems and their associated equipment, Flare Ignition Systems, Thermal Oxiders (Incinerators)

We offer refurbishment of existing flares and upgrade of Flare Ignition Systems, compliant with SANS 329 Gas Regulations

7

GASHOLDERS

With our technology partner, Motherwell Bridge International, Clayton-Walker Gasholders, Engineered Thermal Systems can offer a range

of wet and dry seal gasholders for a range of stored gases.

Motherwell Bridge International are also leaders in the field of Fuel Storage Tanks for the Gas & Petroleum Industry.

8

ETS has recently undertaken two (2) ground breaking Gasholder Upgrade projects with ArcelorMittal; Newcastle

World first conversion of an 80 000m3 multi-lift spiral guided 15 000m3 Single lift column guided Gasholder roof replaced without an

Gasholder to a multi-lift column guided gasholder internal roof support structure.

9

Who are our Technology Partners?

Mechatherm International

UK Aluminum and Steel

WS-Wärmeprozestechnik

Germany Combustion Specialists

Resistalloy International

United Kingdom

Electric Strip Element

Heating

Motherwell Bridge International

United Kingdom

Gasholders & Fuel

Storage Tanks

10

Peiler Montanwärme

Germany Recuperators

Thermal Technology Group

USA Alloy Dry Skids

Flare Industries

Texas, USA Flare Ignition Systems

Pyronics

Cleveland, USA

Industrial Combustion

Systems

11

12

Key Members of our Team

Aresh Mohabeer - Managing Director

B.Sc. (Hons) Electrical.

Registered Pr Eng. with ECSA

Government Certificate Of Competency (GCC)

15 Years In Furnace Industry

(Divisional Engineer; Rolling Mill – Highveld Steel)

Engineered Thermal 2003 – Present

Highveld Steel 1995-2003

Simon Rieckert – Project Manager

Projects/Contracts/Sales

Specializes In Instrumentation/Combustion systems

10 Years in Combustion Industry

Registered Gas Installer (NG & LPG)

Engineered Thermal 2008 – Present

The Combustion Group 2004 - 2007

SCAW Metals 1998 - 2003

Basil Peters - Engineering Consultant

B Sc(Hons) Mech. Eng. C.Eng

50 Years in Furnace Industry Engineered Thermal 1991 - Present

Head Of Furnace Dept IMS 1986-1991

Headed Furnace Division At Leys Engineering 73 – 86

Stein Atkinson Stordy 1964 – 1973

Alex Rae - Projects/Contracts/Sales

City & Guilds – Electrical - UK

Specialist In Aluminum& Electrical Heating

35+ Years In Furnace Industry Engineered Thermal 1991 – Present

IMS 1986 – 1991

Leys Engineering 1976 – 1986

Infurnco – 1976

Harry Tibbenham - Projects/Contracts/Sales

Specialist In Controls/Instrumentation/Energy

35+ Years In Furnace Industry Engineered Thermal 1994 – Present

IMS 1986 – 1994

Leys Engineering 1976 – 1986

Mrs. Lizelle Ferns –

Manager Admin / Accounts/Sales (Spares)

18 years In Furnace Industry

Engineered Thermal 1996 – Present

13

Our Competitors

We compete with a number of different local companies in different areas of our product range. We also compete locally with overseas companies,

particularly with larger value projects.

The Future

Having ‘earned our stripes’ over a 20 year period, and whilst taking nothing for granted, ETS is well positioned to exploit the future opportunities that our

established position in the market offers.

SHEQ

Although having recently been successfully audited by our larger customers, e.g. Arcelor Mittal , ETS is cognisant of the drive towards improved quality and

higher safety standards and thus maintain an integrated Safety, Health, Environmental, and Quality management system.. We have compiled Safety,

Health, Environmental, and Quality manuals including policies, procedures, flow charts, and standard forms to ensure we are ISO 9001:2000, ISO

14001:1996, OSHAS 18001:1999 compliant.

BEE

ETS is cognisant of the drive towards Black Economic Empowerment / Employment Equity and has a level 2 BEE rating.