7/31/2019 4219_chain_guide_150

1/3

Product Data

Castrol Chain Guide 15016.08.2005, B1852/05Castrol and the Castrol logo are trademarks of Castrol Limited, used under licence.

All reasonable care has been taken to ensure that the information contained in this publication is accurate as of the date of printing. However,such information may, nevertheless, be affected by changes in the blend formulation occurring subsequent to the date of printing. Material SafetyData Sheets are available for all Castrol Industrial Australia products. The MSDS must be consulted for appropriate information regarding storage,safe handling and disposal of a product.

Industrial Lubricants and Services - Australia. GPO Box 5222BB, Melbourne VIC 3001Technical Advice Line 1300 557 998www.castrol.com.auSydney 02 9795 4800.Melbourne 03 9268 4200. Brisbane 07 3850 9300. Adelaide 08 8347 6200. Perth 08 9268 9288.Page 1 of 3

Castrol Chain Guide 150Mineral Oil Based Extreme Pressure Industrial Chain and Guide Oil

Description

Castrol Chain Guide 150 is formulated from premium quality refined base oils and contains anti-wear andtackifier for application as a general lubricant in modern multi blade gang saws, edgers, chains, slides, sprockets,arbours and bearings as utilised in the saw mill industry.

Chain Guide 150 contains sulphur-phosphorus as the extreme pressure (EP) additive, oxidation, corrosioninhibitors, antifoam and possesses good demulsification making it an excellent all-round Lubricant for the Timberindustry.

Application

Chain Guide 150 is an excellent general machine lubricant which has been designed to be utilised as a commonfluid in central lubrication systems as found in modern commercial Saw Mill operations.

Chain Guide 150 is formulated to give superior lubrication to modern multi blade gang saws and edgers for bothsaw guide, arbour and blade lubrication, thereby enabling higher accuracy cutting while maintaining sawcleanliness.

Chains, sprockets, slides, bearings and gearbox applications can also be lubricated allowing for a reduction oflubrication products on site.

Chain Guide 150 was developed in Australia to meet the unique needs of the Australasian Timber industry.

Features & Benefits

Sulphur-phosphorus EP additives. Good load carrying ability - reduced wear under heavy loads.

Antioxidation additives. Withstands elevated temperatures extended service life.

Contains corrosion inhibitors. Resistance to chemical corrosion ongoing protections of lubricatedsurfaces

Excellent demulsification properties. Ability to handle water ingress maintains full lubrication film, no lossof performance.

Tackifying additive. Prevents throw off maintains full lubrication film.

7/31/2019 4219_chain_guide_150

2/3

Product Data

Castrol Chain Guide 15016.08.2005, B1852/05Castrol and the Castrol logo are trademarks of Castrol Limited, used under licence.

All reasonable care has been taken to ensure that the information contained in this publication is accurate as of the date of printing. However,such information may, nevertheless, be affected by changes in the blend formulation occurring subsequent to the date of printing. Material SafetyData Sheets are available for all Castrol Industrial Australia products. The MSDS must be consulted for appropriate information regarding storage,safe handling and disposal of a product.

Industrial Lubricants and Services - Australia. GPO Box 5222BB, Melbourne VIC 3001Technical Advice Line 1300 557 998www.castrol.com.auSydney 02 9795 4800.Melbourne 03 9268 4200. Brisbane 07 3850 9300. Adelaide 08 8347 6200. Perth 08 9268 9288.Page 2 of 3

Technical Chemical & Physical Data

Test Test Method Castrol Chain Guide 150

Physical properties

Density @15c IP160 0.896KV @ 40C (cst)

100c (cst)IP70 150

14.9Viscosity Index IP226 99Pour Point IP16 -12Flash Point: Closed c

Open cIP34 212

232Fire Point IP35 260Performance Characteristics

AGMA Lubrication No 4EP

Foam Characteristics:Tendency / stability IP146SEQUENCE 123

10/NIL20/NIL10/NIL

Air release @50c (Min ) IP313 15Demulsification (sec) IP19 210Neutralisation No IP139 0.15Oxidation Stability % increase ASTM D2893 0.9Copper corrosion 3 hours @ 100c IP154 1bRust Prevention IP135 A&B PASS

Extreme Pressure PropertiesFriction and wear test forlubricants: 4 ball test weldingload kg

ASTM 2783 260

4 ball wear test; mean wear scar

Dia (mm) 40kg for 1 hour

IP239 0.34

Timken Wear test OK load kg IP240 29.6SAE Wear test (500rpm)Average Failure load kg

123

Procedure A/S.3/90FZG Failure Stage

DIN 61364 12+

Procedure A/16.6/90FZG Failure Stage

DIN 61364 12+

The above are typical data and do not constitute a specification

7/31/2019 4219_chain_guide_150

3/3

Product Data

Castrol Chain Guide 15016.08.2005, B1852/05Castrol and the Castrol logo are trademarks of Castrol Limited, used under licence.

All reasonable care has been taken to ensure that the information contained in this publication is accurate as of the date of printing. However,such information may, nevertheless, be affected by changes in the blend formulation occurring subsequent to the date of printing. Material SafetyData Sheets are available for all Castrol Industrial Australia products. The MSDS must be consulted for appropriate information regarding storage,safe handling and disposal of a product.

Industrial Lubricants and Services - Australia. GPO Box 5222BB, Melbourne VIC 3001Technical Advice Line 1300 557 998www.castrol.com.auSydney 02 9795 4800.Melbourne 03 9268 4200. Brisbane 07 3850 9300. Adelaide 08 8347 6200. Perth 08 9268 9288.Page 3 of 3

Health & SafetyChain Guide 150 is considered non-hazardous according to Worksafe. However, in line with safe handlingpractices, it is recommended that the handling instruction outlined in the Castrol Material Safety Data Sheet befollowed.

Spillage: Small: Soak up using an inert mineral absorbent such as Castrol Diatomaceous Earth and disposeof in the appropriate manner.

Large: Corrective action usually dictated by individual Company Safety Procedures. Immediatecontainment and subsequent removal is essential.

Disposal: Oily materials must not be allowed to enter ground water, water courses, sewerage or drainagesystems. Refer to local waste disposal authority for legal requirements.

Product Removal

Bare Metal Surfaces: Remove with Castrol solvent cleaners or water based degreasers.

Hand Cleaning: Use any of the Castrol range of hand cleaners e.g. CareClean Plus.

Other Surfaces: Contact your local Special Products Division in each State office.