40ch DWDM Mux Demux + Montior Port + 1310nm Port for 40G/100G
5
40ch DWDM Mux Demux + Montior Port + 1310nm Port for 40G/100G 1U Rack Mount, LC/UPC 1 Datasheet WDM Optical Network Overview The 40ch Mux Demux is a high density, low loss and standalone passive optical module that provides excellent solution for infrastructure savings by aggregating all 40 DWDM channels at a single site. All 40 channels are spreading over the C-band per ITU-T 100GHz spacing between channels using high quality AAWG technology. The 1310nm port can be used for 40G/100G transceivers (40GBASE-LR4/ER4 resp. 100GBASE-LR4/ER4). The 40 DWDM channels are able to transport 400Gbps so that one can run totally 500Gbps over this unit. Highlights • Multiplexing of 40 channels on fiber pair • Low insertion loss • 1U 19” low profile modular design • LC/UPC duplex connectors • 2% monitor port for Tx and Rx , ensures easy troubleshooting without downtime • 1310nm port allows the overlaid on an existing legacy 1310nm network such as 1000Base SFP LX, 10G SFP+ LR, 40G QSFP+ LR4 and 100G CFP LR4 • Compliant to ITU G.694.1, 100GHz ITU gird, 0.8 nm spacing • Based on a- athermal AWG technology with Gaussian shaped pass bands • Passive, no electricity needed (MTBF ca. 500 years)
-
Upload
chloe-wang -
Category
Engineering
-
view
64 -
download
3
Transcript of 40ch DWDM Mux Demux + Montior Port + 1310nm Port for 40G/100G
40ch DWDM Mux Demux + Montior Port + 1310nm Port for 40G/100G 1U Rack Mount, LC/UPC
1
Datasheet
WDM Optical Network
Overview
The 40ch Mux Demux is a high density, low loss and standalone passive optical module that provides excellent solution for infrastructure savings by aggregating all 40 DWDM channels at a single site. All 40 channels are spreading over the C-band per ITU-T 100GHz spacing between channels using high quality AAWG technology.
The 1310nm port can be used for 40G/100G transceivers (40GBASE-LR4/ER4 resp. 100GBASE-LR4/ER4). The 40 DWDM channels are able to transport 400Gbps so that one can run totally 500Gbps over this unit.
Highlights
• Multiplexing of 40 channels on fiber pair• Low insertion loss• 1U 19” low profile modular design• LC/UPC duplex connectors• 2% monitor port for Tx and Rx , ensures easy troubleshooting without downtime• 1310nm port allows the overlaid on an existing legacy 1310nm network such as
1000Base SFP LX, 10G SFP+ LR, 40G QSFP+ LR4 and 100G CFP LR4• Compliant to ITU G.694.1, 100GHz ITU gird, 0.8 nm spacing• Based on a- athermal AWG technology with Gaussian shaped pass bands• Passive, no electricity needed (MTBF ca. 500 years)
2
Datasheet
WDM Optical Network
General SpecificationFront View Function
35887 C21 C22 C23 C24 C25 C26 C27 C28 C29 C30 C31 C32 C33 C34 C35 C36 C37 C38 C39 C40
C41 C42 C43 C44 C45 C46 C47 C48 C49 C50 C51 C52 C53 C54 C55 C56 C57 C58 C59 C60
TX RX
C21
...
MON Port-OSA measuring instrument-Software for analysis
...Transmission on fiber pair
DW
DM
MUX D
EMUX
MON
LINE
Technical DataOperating Channel 40 channels C21-C60 (DWDM ports)
Channel Spacing 100 GHz (0.8nm)IL Link 5.0dB(max) 3.5dB(typical)
Adjacent Channel Isolation > 25dBNon-adjacent Channel Isolation > 29dB
Operating Return Loss > 45dBDirectivity > 50dBPolarzation Dependent Loss < 0.15dBChannel Uniformity < 1.5dBMax. Optical Power < 500mWOperating Temperature -5°C~ +75°C
Storage Temperature -40°C~ +80°C
Technology AAWG
IL Link@Mon 0.5dB
IL Link@1310 0.5dB
RX TX
1310nm port for existing legacy traffic-40GBASE-LR4/ER4 QSFP+-10GBASE-LR XFP/SFP+ 1310nm-100BASE-LX/FX SFP 1310nm
1310nm port for existing legacy traffic-40GBASE-LR4/ER4 QSFP+-10GBASE-LR XFP/SFP+ 1310nm-100BASE-LX/FX SFP 1310nm
MON Port-OSA measuring instrument-Software for analysis
DW
DM
MUX D
EMUX
Switch
Storage
IP
40DWDMDFRX TX
1310
Page 3 of 4 +86 (755) 8300 3611 [email protected] www.fiberstore.com
Copyright © 2009-2015 Fiberstore
+86 (755) 8300 3611 [email protected] www.fiberstore.com
Copyright © 2009-2015 Fiberstore
+86 (755) 8300 3611 [email protected] www.fiberstore.com [email protected] FSCOM3
Datasheet
WDM Optical Network
Application ExampleOverlaying 10Gbps Networks with Additional 40Gbps or 100Gbps Services
How to add 40Gbps and 100Gbps services to your existing metro networks without effecting the legacy installation?
In fact, you just need to plug 40G or 100G fiber optic transceiver into the terminal equipment (Ethernet switch, router etc.) , then use the patch cable to connect it to your existing DWDM network via a 1310nm band pass port on the DWDM multiplexer.
Since the 1310nm band port is integrated into a 40 channels 100GHz DWDM multiplexer, then this set-up allows the transport of up to 40 x10Gbps plus 100Gbps over one fiber pair, in total 500Gbps, but without replacing any infrastructure.
40C
H M
ux&
Dem
ux+1
310n
m
11122wweeeee
eeDWDM Mux Demux Series
40/16 CHANNELS
40CH M
ux&
Dem
ux+1310nm
40C
H M
ux&
Dem
ux+1
310n
m
Duplex SM Dark Fiber
Up to 500Gbps Service
Storage
ADM
Video
Switch
Video
Storage
1310nm for 40G LR4/ER4,
100G CFP LR4
40x 10G DWDM Transceiver
...... 40x
10G DWDM Transceiver
1310nm for 40G LR4/ER4,
100G CFP LR4
Storage
Switch
Switch
Application ID# Description
40 channels 33485 40 ch. DWDM Mux Demux, 100GHz, C21-C60, with monitor port, 3.0dB typical IL, 4.5dB max IL, duplex LC/UPC
40 channels 35886 40 ch. DWDM Mux Demux, 100GHz, C21-C60, with monitor port, 4.5dB typical IL, 6.0dB max IL, duplex LC/UPC
40 channels 35887 40 ch. DWDM Mux Demux, 100GHz, C21-C60, with monitor port and 1310nm port, 3.5dB typical IL, 5.0dB max IL, duplex LC/UPC
16 channels 50123 16 ch. DWDM Mux Demux, 100GHz, C21-C36, with expansion port, IL=5.0dB, duplex LC/UPC
+86 (755) 8300 3611 [email protected] www.fiberstore.com Page 4 of 4
Copyright © 2009-2015 Fiberstore
+86 (755) 8300 3611 [email protected] www.fiberstore.com Page 4 of 6
Copyright © 2009-2015 Fiberstore
+86 (755) 8300 3611 [email protected] www.fiberstore.com
[email protected] FS.COM4
Datasheet
WDM Optical Network
ITU Channel Guiding
ITU Channel(xx or yy) 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Wavelength (nm)
ITU Channel(xx or yy) 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Wavelength (nm)
1560.20
1559.39
1558.58
1557.77
1556.96
1556.15
1555.34
1554.54
1553.73
1552.93
1552.12
1551.32
1550.52
1549.72
1548.91
1548.11
1547.32
1546.52
1545.72
1544.92
1544.13
1543.33
1542.54
1541.75
1540.95
1540.16
1539.37
1538.58
1537.79
1537.00
1536.22
1535.43
1534.64
1533.86
1533.07
1532.29
1531.51
1530.72
1529.94
1529.16
21
8 CHANNELS SINGLE FIBER
Application ID# Description
8 channels 50116 8 ch. DWDM Mux Demux, 100GHz, C22-C36 for transceiver wavelengths, with expansion port, IL =4.3dB, LC/UPC, combined with ID#50117
8 channels 50117 8 ch. DWDM Mux Demux, 100GHz, C21-C35 for transceiver wavelengths, with expansion port, IL =4.3dB, LC/UPC, combined with ID#50116
8 channels 50118 8 ch. DWDM Mux Demux, 100GHz, C44-C58 for transceiver wavelengths, IL =3.8dB, LC/UPC, combined with ID#50119
8 channels 50119 8 ch. DWDM Mux Demux, 100GHz, C43-C57 for transceiver wavelengths, IL =3.8dB, LC/UPC, combined with ID#50118
Layout and Dimensions
- Width: 483±0.2mm(19'') - The color of the moudule is black- Height: 44mm(1.73'') - All fonts and lables are printed in black - Depth: 256mm(10.08'')
481.8 ±0.2mm
44.0
0mm
261.20mm
437.80mm
Layout and Dimensions
- Width: 481.8±0.2mm(19'') - The color of the moudule is black- Height: 44mm(1.73'') - All fonts and lables are printed in black - Depth: 261.2mm(10.28'')
Page 5 of 6
Copyright © 2009-2015 Fiberstore Copyright © 2009-2015 Fiberstore
[email protected] FS.COMWDM Optical Network Copyright © 2009-2016 FS.COM All Rights Reserved.
Datasheet
WDM Optical Network
Contact Us
Addresses, phone number and fax number also have been listed at www.fs.com. Please e-mail us at [email protected] or call us for assistance.
All statements, technical information, and recommendations related to the products here are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibil ity is assumed for any inaccuracies. Please contact FS for more information.
Fiberstore ChinaRoom 301, Third Floor, Weiyong Building, No. 10 Kefa Road, Nanshan District, Shenzhen, 518057, ChinaTel: +86 (755) 8300 3611Fax: +86 (755) 8326 9395
Fiberstore U.S. 331 Andover Park East Ste330, Tukwila, WA 98188, United StatesTel: +1-425-226-2035Fax: +1-253-246-7881
Fiberstore Hong Kong1220 Tung Chun Commercial Centre, 438-444 Shanghai Street, Kowloon, HongKongTel: +(852) 817 636 06Fax: +(852) 817 636 06
Fiberstore U.K.Third Floor 207 Regent Street, London, W1B 3HH, United KingdomTel: +44 (020) 3287 6810
![BRIDGECOM 40Ch -EAR@ Hear We go !! +AUX-IN +Earphone · (FHSS:Frequency Hopping Spread 1 RJVñßO[GS-X5] BRIDGECOM GS -X5 g.ZAR BRIDGE.COM GS-T ISM2.403.v2.480Ghz : 10mW/MHz -95dBm](https://static.fdocuments.in/doc/165x107/5f439e5a62351d44494c708d/bridgecom-40ch-ear-hear-we-go-aux-in-fhssfrequency-hopping-spread-1-rjvogs-x5.jpg)
