4000 Imaje 4020 – Connectivity. 4000 Imaje 4020 – Content Content of Chapter Connectivity: 1....

10
4000 Imaje 4020 – Connectivity

Transcript of 4000 Imaje 4020 – Connectivity. 4000 Imaje 4020 – Content Content of Chapter Connectivity: 1....

Page 1: 4000 Imaje 4020 – Connectivity. 4000 Imaje 4020 – Content Content of Chapter Connectivity: 1. Interfaces 2. Serial connections 3. Ethernet connection.

4000

Imaje 4020 – Connectivity

Page 2: 4000 Imaje 4020 – Connectivity. 4000 Imaje 4020 – Content Content of Chapter Connectivity: 1. Interfaces 2. Serial connections 3. Ethernet connection.

4000

Imaje 4020 – Content

Content of Chapter Connectivity:

1. Interfaces

2. Serial connections

3. Ethernet connection

4. Exercise- Connections; Ethernet and Serial

Page 3: 4000 Imaje 4020 – Connectivity. 4000 Imaje 4020 – Content Content of Chapter Connectivity: 1. Interfaces 2. Serial connections 3. Ethernet connection.

4000

1. Interfaces

■ 1x Serial RS232, COM1, RJ-45, up to 115Kbps.■ 1x Serial RS232, COM2, DB9, up to 115Kbps.■ 1x Ethernet, LAN, RJ-45, 10/100Mbps.

Page 4: 4000 Imaje 4020 – Connectivity. 4000 Imaje 4020 – Content Content of Chapter Connectivity: 1. Interfaces 2. Serial connections 3. Ethernet connection.

4000

2. Serial connection- Print mode

■ Serial Interface RS232 – DB9 or RJ45

With the Serial RS232 ports, possible to set:

• Print Mode (Normal mode):In this mode the control unit can receive external variables. XCL, ActiveX or scanners etc can be used.

LAN

23Telnet

21FTP

9100RAW

Operating system 4020

Com2Com1

Page 5: 4000 Imaje 4020 – Connectivity. 4000 Imaje 4020 – Content Content of Chapter Connectivity: 1. Interfaces 2. Serial connections 3. Ethernet connection.

4000

2. Serial connection- Passive server mode

■ Passive Server Mode (has to be chosen on the control unit).This mode is used in combination with the Ethernet port and the function is to communicate through the printer with external devices connected to the com ports. The external serial devices can in this way be reachable on the network even though they don’t have network support by their own. The configured com port will be given a TCP port number which is used to connect to the serial device. It requires a software on a server that can connect to different TCP ports.

LAN

23Telnet

21FTP

9100RAW

Operating system 4020

Com22002

Com1

2001

Page 6: 4000 Imaje 4020 – Connectivity. 4000 Imaje 4020 – Content Content of Chapter Connectivity: 1. Interfaces 2. Serial connections 3. Ethernet connection.

4000

2. Serial connection

■ Serial Interface RS232– DB9 or RJ45

• Cable between COM-port on PC, Scanner or weight to Controllers COM1 or COM2

• Cable length of maximum 5m is recommended. See Book for Service Engineers for pin configuration.

PC

RS232

Page 7: 4000 Imaje 4020 – Connectivity. 4000 Imaje 4020 – Content Content of Chapter Connectivity: 1. Interfaces 2. Serial connections 3. Ethernet connection.

4000

3. Ethernet

■ Ethernet interface- LAN, RJ45

With the Ethernet LAN port, possible to:

Administration via NetCenter

Make backup of files, jobs

Send XCL commands

Page 8: 4000 Imaje 4020 – Connectivity. 4000 Imaje 4020 – Content Content of Chapter Connectivity: 1. Interfaces 2. Serial connections 3. Ethernet connection.

4000

3. Ethernet

■ Ethernet interface- LAN, RJ45

• Cable between LAN-port on PC and Printer LAN port

• Unlimited cable length*

• Standard UTP/STP cables.

PC

Ethernet

* 90 Meter, Hub/Switch must be connected if longer

Page 9: 4000 Imaje 4020 – Connectivity. 4000 Imaje 4020 – Content Content of Chapter Connectivity: 1. Interfaces 2. Serial connections 3. Ethernet connection.

4000

3. Ethernet

■ Ethernet interface- LAN, RJ45

• In a LAN can several printers be connected to one PC.

Page 10: 4000 Imaje 4020 – Connectivity. 4000 Imaje 4020 – Content Content of Chapter Connectivity: 1. Interfaces 2. Serial connections 3. Ethernet connection.

4000

4. Exercise

■ Hands on practice

Exercise: Connectivity; Ethernet and

Serial