4 Things that affect your pictures… ISO Aperture Shutter Speed LIGHT.
Embed Size (px)
Transcript of 4 Things that affect your pictures… ISO Aperture Shutter Speed LIGHT.
- Slide 1
- 4 Things that affect your pictures ISO Aperture Shutter Speed LIGHT
- Slide 2
- Shutter Speed Literally, how long it takes the shutter to open and shut to take the photo. The faster the shutter opens and closes, the less light comes in and out. The less light that comes in, the darker your picture is (when your shutter moves quickly) However, the faster the shutter is, the faster the subjects can be moving in the picture! Its less likely to be a blurry picture. (A fast shutter speed = good for sports shots)
- Slide 3
- Shutter speed is measured in fractions of a second. (For example 1/3000 is much faster than 1/30) Unless youre using a tripod (which we dont have), you want to use a speed of at least 1/60, or else your shot will be blurry (because your hands move) Shutter speeds typically double with each setting (1/500, 1/250, 1/125, 1/60, 1/30, 1/15, 1/8)
- Slide 4
- Faster shutter speed
- Slide 5
- Slower shutter speed. Sometimes, a slower speed can be good. Consider what you are trying to do! Slower is also good for still photography.
- Slide 6
- Aperture Aperture affects how much light gets in and out. It is the part of the lens that allows light in (like a funnel). It can be opened wide to allow a lot of light in, or closed up to let a little light in.
- Slide 7
- Aperture works like your eyes. When its dark, your pupil gets big to get as much light as possible, but when its bright, your pupils get smaller because theres so much more light! Dark (exaggerated, but you get the idea) More light
- Slide 8
- Setting aperture Aperture is set in decimals, often called f- stops. It works opposite to what you would think. A HIGHER # = a SMALLER amount of light. Tons of light Some light A bit of light Little light
- Slide 9
- ISO The measurement of how sensitive a camera is to light It is measured in numbers (100, 200, 400, 800, 1600, etc.), with 100 being the lowest 100 is the least sensitive to light, which means you probably want to use it for a situation that already has a lot of light (typically not nighttime shots)
- Slide 10
- 100 also typically means the clearest, least grainy shots. (less sandy looking) Use a higher ISO when necessary to get a high enough shutter speed to freeze camera or subject motion (fast moving shots) Your best bet is to use the lowest ISO you can. Try not to go above 800, since you are not a professional
- Slide 11
- High ISO
- Slide 12
- Low ISO
- Slide 13
- ISO Settings The best quality photos are shot using the lowest ISO (usually ISO 100). Using a higher ISO results in more noise (grain) and less detail. ALWAYS USE THE LOWEST POSSIBLE ISO IN ANY SITUATION Use a higher ISO when necessary to get a high enough shutter speed to freeze camera or subject motion.
- Slide 14
- Working together All 3 of these things need to work together for a good photo. Try taking the same photo while adjusting the ISO, aperture, and shutter speed. See the last slide for some example settings.
- Slide 15
- Notes: Try NOT to use the flash on the camera. Turn it off. Try to use the natural light. Consider using the A Mode if the subject is moving a lot. The camera will help choose a shutter speed for you that way. For now, unless you really KNOW cameras, dont touch the other buttons. Youll end up doing something you cant fix!
- Slide 16
- To get to the ISO Turn camera on Set to M (for Manual)
- Slide 17
- Press the button under the letters ISO on back panel and hold it down.
- Slide 18
- Turn the gear on back panel to change ISO as needed. R = up L = down Remember, try 100 first
- Slide 19
- When the camera turns on, on top you should see the setting for aperture. If you dont, press Menu on the back panel twice. To get to the Aperture
- Slide 20
- Use the front gear to change the f-stop (it says f it front of it) to what you want it to be.
- Slide 21
- To get to the Shutter Speed When the camera turns on, on top you should see the setting for aperture. If you dont, press Menu on the back panel twice. Stands for 1/160 in photo
- Slide 22
- Turn the gear on back panel to change ISO as needed. R = up L = down
- Slide 23
- Other stuff Your photo will show up on the back screen immediately after you take it. It will disappear afterwards. To make it reappear, press the play button.
- Slide 24
- If you dont like it, press the trash button twice.
- Slide 25
- Dont remember your settings? When your photo shows up on the back screen, you can press the toggle button down to get your camera settings. Remember, press the Play button if the picture has disappeared.
- Slide 26
- You should get this screen: And if you press down again, this screen:
- Slide 27
- Outdoors, daylight, portrait: ISO 100, f/2.8-4, set shutter speed to match and provide correct exposure Outdoors, dusk, landscape shot, on a tripod: ISO 100, f/11, set shutter speed to give correct exposure Indoors, fairly dark, candid photos: set aperture to widest open setting (f/2.8 or wider if possible). Set ISO to 800 or 1600, check to make sure shutter speed is above 1/30 or so. If not youll need to add flash. Indoors, bright, basketball game: ISO 800, widest aperture, keep shutter speed above 1/250. You may have to go to ISO 1600 to do so. These examples do NOT cover all situations. There are no hard and fast rules its quite possible to shoot indoors at ISO 100 in some situations, and outdoors at ISO 800 in others. You make the call!