4 m.tech Ece Communication 09 11 Verifi

ACADEMIC REGULATIONSCOURSE STRUCTURE AND SYLLABI

FORM.TECH.

COMMUNICATIONS & SIGNAL PROCESSING(ELECTRONICS AND COMMUNICATIONS

ENGINEERING)2011-2012

GAYATRI VIDYA PARISHAD COLLEGE OF ENGINEERING(AUTONOMOUS)

ACCREDITED BY NAACWITH A GRADE WITH A CGPA OF 3.47/4.00AFFILIATED TO JNTU KAKINADA

MADHURAWADA, VISAKHAPATNAM 530048

VisionTo evolve into and sustain as a Centre ofExcellence in Technological Educationand Research with a holistic approach.

MissionTo produce high quality engineering graduateswith the requisite theoretical and practicalknowledge and social awareness to be able tocontribute effectively to the progress of the

society through their chosen field of endeavor.To undertake Research & Development, andextension activities in the fields of Science andEngineering in areas of relevance for immediate

application as well as for strengthening orestablishing fundamental knowledge.

F O R E W O R D

It is two years since the G.V.P College of Engineering has becomeAutonomous with the appreciation and support of erstwhile JNTU andthe fast growing new JNTU-K. The college is progressing well with itsprogrammes and procedures drawing more and more accolades from itssister autonomous colleges and higher authoritities. The studentcommunity, also could adjust well to the new system without anyacrimony.

The College is enriched with the experience of running the first batch ofPost-graduate programmes under Autonomous stream. It is a momentof pride and achievement that the first Autonomous batch of M.Tech insome branches left the college to the satisfaction of all concernedincluding firms visited the campus for placements. It is with thisexperience the curricula of some of the programmes have been reviewedand revamped for better performance and results.

Another larger than canvas picture is foreseen for the programmeswherein the college is getting the funds through TEQIP II for up-scalingthe PG education and research under sub- component 1.2.

The help extended by the first set of Boards of Studies, Academic counciland Governing Body in designing the system and its mechanism isoverwhelming. The encouragement given by the affiliating JNTU-K hasleft no task insurmountable.

The new BOS and Academic Council are expected to help in thisdirection as the term of the present ones expired.

Principal

ACADEMIC REGULATIONS(Effective for the students admitted into

first year from the academic year 2011-2012)The M.Tech Degree of JNTU-KAKINADA shall be recommendedto be conferred on candidates who are admitted to the program andfulfill all the requirements for the award of the Degree.

1.0 ELGIBILITY FOR ADMISSION:Admission to the above program shall be made subject to theeligibility, qualifications and specialization as per the guidelinesprescribed by the APSCHE and AICTE from time to time.

2.0 AWARD OF M.TECH. DEGREE:a. A student shall be declared eligible for the award of the M.Tech.

degree, if he pursues a course of study and completes itsuccessfully for not less than two academic years and not morethan four academic years.

b. A student, who fails to fulfill all the academic requirements forthe award of the Degree within four academic years from theyear of his admission, shall forfeit his seat in M.Tech. Course.

c. The duration of each semester will normally be 20 weeks with 5days a week. A working day shall have 7 periods each of50minutes.

1

3.0 COURSES OF STUDY:

4.0 ATTENDANCE:The attendance shall be considered subject wise.

a. A candidate shall be deemed to have eligibility to write endsemester examinations in a subject if he has put in at least 75%of attendance in that subject.

b. Shortage of attendance up to 10% in any subject (i.e. 65% andabove and below 75%) may be condoned by a Committee ongenuine and valid reasons on representation by the candidatewith supporting evidence.

c. Shortage of attendance below 65% shall in no case becondoned.

d. A student who gets less than 65% attendance in a maximum oftwo subjects in any semester shall not be permitted to take theend- semester examination in which he/she falls short. His/herregistration for those subjects will be treated as cancelled. Thestudent should re-register and repeat those subjects as and whenoffered next.

e. If a student gets less than 65% attendance in more than two

2

M.TECH. COURSES INTAKEChemical Engineering 18Computer Science and Engineering 18CAD/CAM 18Infrastructural Engineering andManagement 18Structural Engineering 18Power System Control and Automation 18Embedded Systems & VLSI Design 18Communications & Signal Processing 18Software Engineering 18

subjects in any semester he/she shall be detained and has torepeat the entire semester.

f. A stipulated fee shall be payable towards condonation ofshortage of attendance.

5.0 EVALUATION:The Performance of the candidate in each semester shall beevaluated subject-wise, with 100 marks for each theory subjectand 100 marks for each practical, on the basis of InternalEvaluation and End Semester Examination.

a. A candidate shall be deemed to have secured the minimumacademic requirement in a subject if he secures a minimum of40% of marks in the End Examination and a minimumaggregate of 50% of the total marks in the End SemesterExamination and Internal Evaluation taken together.

b. For the theory subjects 60 marks shall be awarded based on theperformance in the End Semester Examination, 40 marks shallbe awarded based on the Internal Evaluation. One part of theinternal evaluation shall be made based on the average of themarks secured in the two MidTerm Examinations of 30 eachconducted one in the middle of the Semester and the otherimmediately after the completion of instruction. Each mid-termexamination shall be conducted for a duration of 120 minuteswith 4 questions without any choice. The remaining 10 marksare awarded through an average of continuous evaluation ofassignments / seminars / any other method, as notified by theteacher at the beginning of the semester.

c. For Practical subjects, 50 marks shall be awarded based on theperformance in the End Semester Examinations, 50 marks

3

shall be awarded based on the day-to-day performance asInternal marks. A candidate has to secure a minimum of 50% inthe external examination and has to secure a minimum of 50%on the aggregate to be declared successful.

d. There shall be a seminar presentation during III semester. Forseminar, a student under the supervision of a faculty member,shall collect the literature on a topic and critically review theliterature and submit it to the Department in a report form andshall make an oral presentation before the DepartmentalCommittee. The Departmental Committee consists of the Headof the Department, supervisor and two other senior facultymembers of the department. For Seminar there will be onlyinternal evaluation of 50 marks. A candidate has to secure aminimum of 50% to be declared successful.

e. For Seminar in I, II Semesters in case of the course structure ofhaving 5 Theory + 2 Labs. + 1 Seminar, a student has to delivera seminar talk in each of the subjects in that semester whichshall be evaluated for 10 marks each and average marks allottedshall be considered. A letter grade from A to C correspondingto the marks allotted may be awarded for the two credits so as tokeep the existing structure and evaluation undisturbed.

A Excellent (average marks > 8)B Good (6< average marks

less than 50% and he has failed in the subject. In such a case thecandidate must re-register for the subject (s) and secure requiredminimum attendance. Attendance in the re-registered subject(s) has to be calculated separately to become eligible to write theend- examination in the re-registered subject(s). In the event ofre-registration, the internal marks and end examination marksobtained in the previous attempt are nullified.

g. In case the candidates secure less than the required attendancein any subject(s), he shall not be permitted to appear for the EndExamination in that subject(s). He shall re-register for thesubject(s) when next offered.

h. Laboratory examination for M.Tech subjects must be conductedwith two Examiners, one of them being Laboratory ClassTeacher and second examiner shall be other than LaboratoryTeacher.

6.0 EVALUATION OF PROJECT / DISSERTATIONWORK:Every candidate shall be required to submit the thesis ordissertation after taking up a topic approved by theDepartmental Research Committee (DRC).

a. A Departmental Research Committee (DRC) shall beconstituted with the Head of the Department as the chairmanand two senior faculty as members to oversee the proceedingsof the project work from allotment to submission.

b. A Central Research Committee (CRC) shall be constituted witha Senior Professor as chair person, Heads of all theDepartments which are offering the M.Tech programs and twoother senior faculty members.

5

c. Registration of Project Work: A candidate is permitted toregister for the project work after satisfying the attendancerequirement of all the subjects (theory and practical subjects.)

d. After satisfying 6.0 c, a candidate has to submit, in consultationwith his project supervisor, the title, objective and plan of actionof his project work to the DRC for its approval. Only afterobtaining the approval of DRC the student can initiate theProject work

e. If a candidate wishes to change his supervisor or topic of theproject he can do so with approval of DRC. However, theDepartmental Project Review Committee shall examine whetherthe change of topic/supervisor leads to a major change in hisinitial plans of project proposal. If so, his date of registrationfor the Project work shall start from the date of change ofSupervisor or topic as the case may be whichever is earlier.

f. A candidate shall submit and present the status report in twostages at least with a gap of 3 months between them aftersatisfying 6.0 d.

g. The work on the project shall be initiated in the beginning of thesecond year and the duration of the project is for two semesters.A candidate shall be permitted to submit his dissertation onlyafter successful completion of all theory and practical subjectwith the approval of CRC but not earlier than 40 weeks from thedate of registration of the project work. For the approval byCRC the candidate shall submit the draft copy of the thesis tothe Principal through the concerned Head of the Department andshall make an oral presentation before the CRC.

h. Three copies of the dissertation certified by the supervisor shallbe submitted to the College after approval by the CRC.

i. The dissertation shall be adjudicated by one examiner selected

6

by the Principal. For this HOD shall submit in consultationwith the supervisor a panel of 5 examiners, who are experiencedin that field.

j. If the report of the examiner is not favorable, the candidate shallrevise and resubmit the dissertation, in a time frame asprescribed by the CRC. If the report of the examiner isunfavorable again, the dissertation shall be summarily rejectedthen the candidate shall change the topic of the Project andoption shall be given to change the supervisor also.

k. If the report of the examiner is favorable, viva-voceexamination shall be conducted by a board consisting of thesupervisor, Head of the Department and the examiner whoadjudicated the dissertation. The Board shall jointly reportcandidates work as:

A. ExcellentB. GoodC. Satisfactory

7.0 AWARD OF DEGREE AND CLASS :A candidate shall be eligible for the respective degree if hesatisfies the minimum academic requirements in every subject andsecures satisfactory or higher grade report on his dissertation andviva-voce.After a student has satisfied the requirements prescribed for thecompletion of the program and is eligible for the award ofM.Tech. Degree he shall be placed in one of the following threeclasses.% of Marks secured Class Awarded

70% and above First Class with Distinction60% and above but less than 70% First Class50% and above but less than 60% Second Class

7

The marks in internal evaluation and end examination shall beshown separately in the marks memorandum.The grade of the dissertation shall also be mentioned in the

marks memorandum.8.0 WITHHOLDING OF RESULTS:

If the candidate has not paid any dues to the college or if any caseof indiscipline is pending against him, the result of the candidatewill be withheld and he will not be allowed into the next highersemester. The recommendation for the issue of the degree shall beliable to be withheld in such cases.

9.0 TRANSITORY REGULATIONS:A candidate who has discontinued or has been detained for want ofattendance or who has failed after having studied the subject iseligible for admission to the same or equivalent subject(s) as andwhen subject(s) is/are offered, subject to 6.0 e and 2.0

10.0 GENERAL1. The academic regulations should be read as a whole for

purpose of any interpretation.2. In case of any doubt or ambiguity in the interpretation of the

above rules, the decision of the Chairman Academic Councilis final.

3. The College may change or amend the academic regulationsand syllabus at any time and the changes amendments madeshall be applicable to all the students with effect from thedate notified by the College.

4. Wherever the word he, him or his occur, it will also includeshe, hers.

***

8

COURSE STRUCTUREI SEMESTERCOURSECODE

THEORY/LAB L P C

10EC2201 Communication Theory 4 - 410EC2202 Digital Data Communications 4 - 410EC2203 Coding Theory and Practice 4 - 410EC2204 Transform Techniques 4 - 410EC2205 Digital Signal Processing 4 - 4

Elective I 4 - 410EC2206 VLSI Technology & Design10EC2207 Microcontroller Applications10EC2208 Digital Signal Processing Lab 3 2

Total 24 3 26II SEMESTERCOURSECODE

THEORY/LAB L P C10EC2209 Wireless Communications &

Networks4 - 4

10EC2210 Fiber Optical CommunicationSystem

4 - 410EC2211 Computer Networks 4 - 410EC2212 Advanced Digital Signal

Processing4 - 4

10EC2213 DSP Processors andArchitecture

4 - 4Elective-II 4 - 4

10EC2214 Image Processing 410EC2215 Embedded System Concepts10EC2216 Advanced Communication Lab 3 2

Total 24 3 269

III SEMESTERCOURSECODE

THEORY/LAB L P CCommencement of Project Work

10EC22S1 SEMINAR - - 2IV SEMESTERCOURSECODE

THEORY/LAB L P C10EC2217 PROJECTWORK/DISSERTATION/THESIS

EXCELLENT/GOOD/SATISFACTORY/NON-SATISFACTORY

- - 56

10

GVPCOE AUTONOMOUS 2011-2012

COMMUNICATION THEORYCourse Code: 10EC2201UNIT IReview of Fourier Techniques in Communication (Including Hilberttransforms and representation of band pass signals). Probability andRandom processes: Random variables, pdf and c.d.f, expected values:transformation of variables in one and two dimensions. Characterizationof a random process: Stationary; ensemble averages; systems withrandom signal excitation; Gaussian processes; electrical noise.UNIT IIAnalog CommunicationsMathematical treatment of Linear (AM, DSB-SC, SSB and VSB) andexponential (PM and FM) modulation; spectra of angle modulatedsignals; Noise performance of linear and exponential modulated signals;PE and DE in FM.

UNIT-IIIIntroduction to Digital CommunicationSampling of low-pass and band-pass signals; quantization ; PAM,Bennets formula; Log-PCM; base band digital communication; Nyquistpulse shaping, spectra analysis of some important line codes.

UNIT-IVDigital Modulation SchemesRepresentation of digital signal waveforms, Introduction to digitalmodulation schemes- ASK, PSK and FSK; Digital demodulation and theoptimal receiver, performance of digital communication systems in thepresence of noise, coherent quadrature modulation techniques.

11

L P C4 0 4

UNIT-VDetection and Estimation TheoryBinary hypothesis testing, Bayes, Minimax and Neyman-Pearson tests;Bayesian parameter estimation, MMSE, MMAE and MAP estimationprocedures.UNIT-VISpread Spectrum ModulationSpread spectrum modulation: Introduction, DS Spread spectrum, use ofSpread spectrum with CDMA, Ranging using DS Spread spectrum, FHSpread spectrum, PN sequences, Acquisition and tracking of FH & DSsignals.UNIT-VIIIntroduction to OFDMThe principles of OFDM, FDM modulation system, orthogonality andOFDM, Transmitter and Receiver sections, multi path channels and theuse of cyclic prefix, ISI, coded OFDM, Non ideal effects in an OFDM,benefits and applications.

UNIT-VIIIInformation TheoryConcept of amount of information, average information, Entropy,information rate Shannons theorem, channel capacity: BSC andGaussian channel, Tradeoff between bandwidth and SNR, optimalcoding techniques; Shannon Fanon coding, Huffman coding.Text Books:

1. John G. Proakis and Masoud Salehi, Communication SystemsEngineering, Prentice-Hall, 2ndEdition, 2002.

2. Fundamentals of Communication Systems, Proakis and Salehi, PrenticeHall.,1st edition,2005

3. Communication Systems, Stern & Mahmoud, Prentice Hall.4. M. Simon, S. Hinedi, and W. Lindsey, Digital Communication

Techniques, Prentice-Hall, 1995.

12

References:1. Modern Analog and Digital Communication B.P.Lathi Oxford reprint, 3rd

Edition, 2004.2. Principles of Communication systems- H.Tanb and D.Schiling TMH 2003

13


DIGITAL DATA COMMUNICATIONSCourse Code: 10EC2202UNIT- IDigital Modulation TechniquesFSK, MSK, BinaryPSK, M-aryPSK, M-aryQAM, DPSK Methods,Bandwidth efficiency, Carrier recovery, Clock recovery.UNIT- IIData Communication MethodsData Communication Circuits, point-to-point, Multi-point configurationsand Topologies, Broadcasting, multicasting configuration, transmissionmodes, 2-wire and 4-wire operations, Codes, Error detection methods,Error correction methods, Character synchronization.UNIT- IIIData Communication ProtocolsAsynchronous protocols, Synchronous protocols, Bisync Protocol,SDLC, HDLC-Frame format, ATM Frame format, Flow control anderror control.UNIT- IVSwitching TechniquesCircuit Switching, Message Switching and Packet Switching principles,Virtual circuit and datagram techniques, X.25 and frame relay.UNIT- VLine Protocals and Congestion ControlLine protocols: Basic mode, Half-duplex point-to-point protocol, Half-Duplex Multi-Point Protocol, Full-Duplex Protocols, Polling, Roll Calland Hub Polling, Traffic management, Congestion control in packetswitching networks and Frame relay.

14

L P C4 0 4

UNIT- VIDigital Multiplexing-ITDM, T1, E1 carrier systems, CCITT-TDM carrier system, CODECchips, Digital hierarchy, Line Encoding, Frame Synchronization.UNIT- VIIDigital Multiplexing-IIMultiplexers, Statistical multiplexer, Concentrator, front-endcommunication processor, Digital PBX, long haul communication withFDM, Hybrid data.UNIT- VIIIOptical NetworksBasic Optical Network Topologies and their performances,SONET/SDH Transmission formats and Speeds, Optical interfaces,SONET/SDH rings and networks.Text Books1. W. TOMASI: Advanced Electronic Communications Systems,

PHI.,4th edition.2. Data and Computer Communications William Stallings 7/e, PEI.3. Optical Communications B.Gerd Keiser, PHI.,4th Edition.References1. T. HOUSELY: Data Communications and Teleprocessing Systems,PHI.,2nd Edition.

2. Data and Computer Networking Communications B.A.Forouzon,3rd TMH.

15


CODING THEORY & PRACTICECourse Code: 10EC2203

UNIT- IInformation TheoryEntropy, Information rate, source coding : Shannon-Fano and Huffmancoding techniques, Mutual Information, Channel capacity of DiscreteChannel, Shannon- Hartly law, Trade-off between bandwidth and SNR.UNIT- IIIntroduction and Overview Error Control CodesExamples of the use of error control codes, basic notations, coding gain,Characterization of Error control codes, performance of error controlcodes, comparison of uncoded and coded systems.UNIT- IIIConvolution CodesConvolution encoders, structural properties of convolution codes, TrellisDiagrams, Viterbi Algorithm, Performance Analysis.UNIT- IVLinear Block CodesLinear block Codes and their properties, standard arrays, Syndromes,Weight Distribution. Error Detection/Correction Properties, ModifiedLinear block codes.UNIT- VFinite FieldsGroups, Rings, Fields Properties of finite Fields, Extension Fields,Polynomials over Finite Fields, Minimal Polynomials, Conjugates.

16

L P C4 0 4

UNIT- VICyclic CodesGeneral theory, Shift Register Implementations, Shortened Cyclic codes,CRCs for Error Detection.UNIT- VIIBch And Rs CodesAlgebraic Description, Frequency Domain Description, DecodingAlgorithms for BCH and RS Codes.UNIT- VIIIApplicationsConcatenated Codes, Interleaves, The Compact Disc, Codes forMagnetic recording.Text Books1. Stephen B.Wicker Error Control Systems for Digital Communicationand storage, Prentice Hall. 1995ISBN 0-13-200809-2

2. Kennedy, Electronic Communication systems, Mc Graw Hill.,4thEdition.

Reference Books1. John Proakis, Digital Communications, TMH.2. Simon Haykin, Communication System,5th Edition, Jhon willey, 2011

17


TRANSFORM TECHNIQUESCourse Code: 10EC2204

UNIT- IIntroductionOrthogonal signal spaces, approximations of functions by a set ofmutually orthogonal functions, Orthogonality in complex functions,trigonometric & exponential Fourier series, Hilbert Transforms,Properties and applications.UNIT- IITwo Dimensional Fourier Transforms and Its ApplicationsConcept of Two Dimensional Fourier transformsproperties & theirsignificance, energy & power spectral density functions.UNIT- IIITwo Dimentional Transforms and Its Applications-IWalsh transforms, Hadamard transform, Discrete Cosine Transforms,Haar Transforms.UNIT- IVTwo Dimentional Transforms and Its Applications-IISlant, KL transforms, Hough Transforms, Radon Transforms.UNIT- VOther TransformsShort time Fourier transforms & properties of STFT, continuous wavelettransforms, Inverse CWT.

18

L P C4 0 4

UNIT- VIDiscrete Wavelet TransformsIntroduction to discrete wavelet transforms & orthogonal waveletdecomposition.UNIT- VIIMulti-Resolution AnalysisMulti-Resolution Analysis (MRA), Two scale relations, Orthogonalwavelets, their relationship to filter banks, PR QMF filter banks.UNIT- VIIIIntroduction to Various WaveletsAlternate wavelet representations.Text Books:1. Signals & systems, B.P.lathi. BS Publishers 1/e, 2004.2.Wavelet transforms Introduction to theory & applications,Raghuveer. M.rao, ajit S, 1st edition, pearson publications, 2006.Bopardikar, Pearson education, Asia.

3. Fundamentals of Digital image processing-A.K.Jain, 2/e Pearson.Reference Books:1. Digital Image Processing- C. Gonzalez & Redwoods 1/e 20012. Fundamentals of wavelets Theory, Algorithms & applications,Jaideva C.Goswami, Andrew K.Chan, John Willey & Sons.

19


DIGITAL SIGNAL PROCESSINGCourse Code: 10EC2205UNIT- IIntroductionIntroduction to Digital Signal Processing: Discrete time signals &sequences, linear shift invariant systems, stability, and causality. Linearconstant coefficient difference equations, Frequency domainrepresentation of discrete time signals and systems.UNIT- IIDiscrete Fourier SeriesProperties of discrete Fourier series, DFS representation of periodicsequences, Discrete Fourier transforms: Properties of DFT, linearconvolution of sequences using DFT, Computation of DFT. Relationbetween Z-transform and DFS.UNIT- IIIFast Fourier TransformsFast Fourier transforms (FFT) - Radix-2 decimation in time anddecimation in frequency FFT Algorithms, Inverse FFT, and FFT forcomposite N.UNIT- IVRealization of Digital FiltersReview of Z-transforms, Applications of Z transforms, solution ofdifference equations of digital filters, Block diagram representation oflinear constant-coefficient difference equations, Basic structures of IIRsystems, Transposed forms, Basic structures of FIR systems, Systemfunction.

20

L P C4 0 4

UNIT- VIIR Digital FiltersAnalog filter approximations Butter worth and Chebyshev, Design ofIIR Digital filters from analog filters, Design Examples: Analog-Digitaltransformations.UNIT- VIFIR Digital FiltersCharacteristics of FIR Digital Filters, frequency response, Design of FIRDigital Filters using Window Techniques, Frequency Samplingtechnique, Comparison of IIR & FIR filters.UNIT- VIIMultirate Digital Signal ProcessingDecimation, interpolation, sampling rate conversion, Implementation ofsampling rate conversion.UNIT- VIIIIntroduction To Dsp ProcessorsIntroduction to programmable DSPs: Multiplier and MultiplierAccumulator (MAC), Modified Bus Structures and Memory Accessschemes in DSPs Multiple access memory, multiport memory, VLSIArchitecture, Pipelining, Special addressing modes, On-ChipPeripherals. Architecture of TMS 320C5X- Introduction, Bus Structure,Central Arithmetic Logic Unit, Auxiliary Registrar, Index Registrar,Auxiliary Register Compare Register, Block Move Address Register,Parallel Logic Unit, Memory mapped registers, program controller,Some flags in the status registers, On- chip registers, On-chipperipherals.

21

Text Books1. Digital Signal Processing, Principles, Algorithms, and Applications:John G. Proakis, Dimitris G. Manolakis, Pearson Education / PHI, 2007.2. Discrete Time Signal Processing A.V.Oppenheim and R.W.Schaffer, PHI.3. Digital Signal Processors Architecture, Programming andApplications, B.Venkataramani, M. Bhaskar, TATA McGraw Hill,2002.Reference Books:1. Digital Signal Processing: Andreas Antoniou, TATA McGraw Hill,20062. Digital Signal Processing: MH Hayes, Schaums Outlines, TATA Mc-Graw Hill, 2007.3. DSP Primer - C. Britton Rorabaugh, Tata McGraw Hill, 2005.4. Fundamentals of Digital Signal Processing using Matlab Robert J.Schilling, Sandra L. Harris, Thomson, 2007.5. Digital Signal Processing Alan V. Oppenheim, Ronald W. Schafer,PHI Ed., 2006.6. Digital Signal ProcessingS.K.Mithra., 3rd edition, TMH, 2009.

22

GVPCOE AUTONOMOUS 2011-2012VLSI TECHNOLOGY & DESIGN

Course Code: 10EC2206

UNIT- IReview of Microelectronics and Introduction to MOS Technologies(MOS, CMOS, Bi CMOS) Technology trends and projections.UNIT- IIBasic Electrical Properties of MOS, CMOS & Bi-COMS CircuitsIds-Vds relationships, Threshold voltage Vt, Gm, Gds and Wo, PassTransistor, MOS, CMOS &Bi CMOS Inverters, Zpu/Zpd, MOS Transistor circuit model, Latch-upin CMOS circuits.UNIT- IIILayout Design and ToolsTransistor structures, Wires and Vias , Scalable Design rules ,LayoutDesign tools.UNIT- IVLogic Gates & LayoutsStatic complementary gates, switch logic, Alternative gate circuits , lowpower gates, Resistive and Inductive interconnect delays.UNIT- VCombinational Logic NetworksLayouts, Simulation, Network delay, interconnect design, poweroptimization, Switch logic networks, Gate and Network testing.

23

L P C4 0 4

UNIT- VISequential SystemsMemory cells and Arrays, clocking disciplines, Design, poweroptimization, Design validation and testing.UNIT- VIIFloor Planning & Architecture DesignFloor planning methods, off-chip connections, High-level synthesis,Architecture for low power, SOCs and Embedded CPUs, Architecturetesting.UNIT- VIIIIntroduction to CAD Systems (Algorithms) and Chip DesignLayout Synthesis and Analysis, Scheduling and printing;Hardware/Software Co-design, chip design methodologies- A simpleDesign example.

Text Books:1. Essentials of VLSI Circuits and Systems, K. Eshraghian et. al( 3

authors) PHI of India Ltd.,20052. Modern VLSI Design, 3rd Edition, Wayne Wolf ,Pearson

Education, fifth IndianReprint,2005.

References:1. Principals of CMOS Design N.H.E Weste, K.Eshraghian, Adison

Wesley, 2nd Edition.2. Introduction to VLSI Design Fabricius, MGH International

Edition, 1990.CMOS Circuit Design, Layout and Simulation Baker, LiBoyce, PHI, 2004.

24


MICROCONTROLLER AND APPLICATIONSCourse Code : 10EC2207UNIT- IOverview Of Architecture and Microcontroller ResourcesArchitecture of a microcontroller Microcontroller resources Resources in advanced and next generation microcontrollers 8051microcontroller Internal and External memories Counters and Timers Synchronous serial-cum-asynchronous serial communication -Interrupts.UNIT- II8051 Family Microcontrollers Instruction SetBasic assembly language programming Data transfer instructions Data and Bit manipulation instructions Arithmetic instructions Instructions for Logical operations on the tes among the Registers,Internal RAM, and SFRs Program flow control instructions Interruptcontrol flow.UNIT- IIIReal Time ControlInterrupts, Interrupt handling structure of an MCU Interrupt Latencyand Interrupt deadline Multiple sources of the interrupts Non-maskable interrupt sources Enabling or disabling of the sources Polling to determine the interrupt source and assignment of the prioritiesamong them Interrupt structure in Intel 8051.UNIT- IVReal Time Control TimersProgrammable Timers in the MCUs Free running counter and realtime control Interrupt interval and density constraints.

25

L P C4 0 4

UNIT- VSystems DesignDigital and Analog Interfacing Methods, Switch, Keypad and Keyboardinterfacings LED and Array of LEDs Keyboard-cum-Displaycontroller (8279) Alphanumeric Devices Display Systems and itsinterfaces Printer interfaces Programmable instruments interfaceusing IEEE 488 Bus Interfacing with the Flash Memory Interfaces Interfacing to High Power Devices Analog input interfacing Analogoutput interfacing Optical motor shaft encoders Industrial control Industrial process control system Prototype MCU based Measuringinstruments Robotics and Embedded control Digital SignalProcessing and Digital Filters.UNIT- VIReal Time Operating System for Micro ControllersReal Time operating system RTOS of Keil (RTX51) Use of RTOS inDesign Software development tools for Microcontrollers.UNIT- VII16-Bit MicrocontrollersHardware Memory map in Intel 80196 family MCU system IO ports Programmable Timers and High-speed outputs and input captures Interrupts instructions.UNIT- VIIIARM 32 Bit MCUsIntroduction to 16/32 Bit processors ARM architecture andorganization ARM / Thumb programming model ARM / Thumbinstruction set Development tools.Text Books:1. Microcontrollers Architecture, Programming, Interfacing and SystemDesign Raj Kamal, Pearson Education, 2005.

2. The 8051 Microcontroller and Embedded Systems Mazidi andMazidi, PHI, 2000.

26

Reference Books:1. Microcontrollers (Theory & Applications) A.V. Deshmuk, WTMH2005.

2. Design with PIC Microcontrollers John B. Peatman, PearsonEducation, 2005.

27


DIGITAL SIGNAL PROCESSING LABCourse Code: 10EC22081. Write a program for linear convolution of two sequences.2. Write a program for circular convolution.3. Write a program to perform linear convolution using circularconvolution.

4. Write a program to perform N-point DFT. Also perform the IDFT onthe result obtained to verify the result.

5. Write a program to perform circular correlation usinga) Direct method b) circular convolution using rotation method.6. Write a program to perform circular convolution and correlation usingDFT.

7. Write a program to perform linear convolution using (a) overlap savemethod (b) overlap add method.

8. Write a program to perform FFT on a sequence using the followingmethods. (a) Decimation in time (b) Decimation in frequency

9. Write a program to perform IDFT on a transformed sequence usingDFT.

10.Write a program to design an FIR filter using windowing technique.11. Write a program to design an IIR filter using (a) impulse invariant

method (b) bilinear transformation method.

28

L P C0 3 2


WIRELESS COMMUNICATIONS AND NETWORKSCourse Code: 10EC2209UNIT- IMultiple Access Techniques for Wireless Communication:Introduction, FDMA, TDMA, Spread Spectrum, Multiple access,SDMA, Packet radio, Packet radio protocols, CSMA protocols,Reservation protocols.UNIT- IIIntroduction to Wireless Networking:Introduction, Difference between wireless and fixed telephone networks,Development of wireless networks, Traffic routing in wireless networks.UNIT- IIIWireless Data Services:CDPD, ARDIS, RMD, Common channel signaling, ISDN, BISDN andATM,SS7, SS7 user part, signaling traffic in SS7.UNIT- IVMobile IP and Wireless Access Protocol:Mobile IP Operation of mobile IP, Co-located address, Registration,Tunneling, WAP Architecture, overview, WML scripts, WAP service,WAP session protocol, wireless transaction, Wireless datagram protocol.UNIT- VWireless LAN Technology:Infrared LANs, Spread spectrum LANs, Narrow bank microwave LANs,IEEE 802 protocol Architecture, IEEE802 architecture and services,802.11 medium access control, 802.11physical layer.

29

L P C4 0 4

UNIT- VIBlue Tooth:Overview, Radio specification, Base band specification, Links managerspecification, Logical link control and adaptation protocol. Introductionto WLL Technology.UNIT- VIIMobile Data Networks:Introduction, Data oriented CDPD Network, GPRS and higher datarates, Short messaging service in GSM, Mobile application protocol.UNIT- VIIIWireless ATM & Hiper LAN:Introduction, Wireless ATM, HIPERLAN, Adhoc Networking andWPAN.Text Books:1. Wireless Communications, Principles, Practice Theodore, S.Rappaport, PHI, 2nd Edn., 2002.

2. Wireless Communication and Networking William Stallings, PHI,2nd edition, 2003.

References:1. Wireless Digital Communications Kamilo Feher, PHI, 2002.2. Principles of Wireless Networks Kaveh Pah Laven and P. KrishnaMurthy, Pearson Education, 2002.

3. Wireless Communications Andreaws F. Molisch, Wiley India, 2006.4. Introduction to Wireless and Mobile Systems Dharma PrakashAgarwal, Qing-An Zeng, Thomson 2nd Edition, 2006.

30


FIBER OPTICAL COMMUNICATION SYSTEMSCourse Code: 10EC2210UNIT-IIntroductionHistorical development, the general system, advantages of OFC, Raytheory transmission-total internal reflection, acceptance angle, numericalaperture, skew rays, fiber materials-glass fibers, halide glass fibers,active glass fibers, plastic clad glass fibers, plastic fibers.UNIT-IIOptic Fiber WaveguidesStep Index Fiber, Graded Index Fiber, Modes in Step-Index Fibers,Modes in Graded Index Fibers, Pulse Distortion and Information Ratein Optic Fibers, Construction of Optic Fibers, Optic Fiber Cables.UNIT-IIISignal degradation in optical fibersAttenuation-absorption, scattering, radiation losses, intramodal andintermodal dispersion, polarization mode dispersion.

UNIT-IVLight Sources and DetectorsLight-Emitting Diodes, Light-Emitting Diodes OperatingCharacteristics, Laser Principles, Laser Diodes, Laser-Diode OperatingCharacteristics, Distributed Feedback Laser Diode, Optical Amplifiers,Fiber Laser, Vertical-Cavity Surface-Emitting Laser Diodes, Principlesof Photodetection, Photomultiplier, Semiconductor Photodiode, PINPhotodiode, Avalanche Photodiode.

31

L P C4 0 4

UNIT-VCouplers and ConnectorsConnector Principles, Fiber end Preparation, Splices, Connectors,Source Coupling, Distribution Networks and Fiber Components,Distribution Networks, Directional Couplers, Star Couplers, Switches,Fiber Optical Isolator, Wavelength-Division Multiplexing, Fiber BraggGratings, Other Components : Attenuator, Circulator and PolarizationController.

UNIT-VIModulation, Noise and DetectionLight-Emitting-Diode Modulation and Circuits, Laser-Diode Modulationand Circuits, Analog-Modulation Formats, Digital-Modulation Formats,Optic Heterodyne Receivers, Thermal and Shot Noise, Signal-to-NoiseRatio, Error Rates, Modal Noise, Amplifier Noise, Laser Noise, andJitter, Additional Noise Contributors, receiver Circuit Design.

UNIT-VIISystem Design and Fiber Optical ApplicationsAnalog System Design, Digital System Design, Applications of FiberOptics-public network applications, military applications, civil,consumer and industrial applications.

UNIT-VIIIOptical fiber measurementsIntroduction, measurement of attenuation, dispersion, refractive indexprofile, numerical aperture, diameter and field.Text Books:

1. Fiber Optic Communications, Joseph. C. Palais, PearsonEducation, Asia, 2002.

2. Optical Fiber Communications, principles and practice, John MSenior, II edition.

32

Reference Books:1. Fiber Optic Systems, John Powers, Irwin Publications, 1997.2. Optical Fiber Communication, Howes M.J., Morgen, D.V JohnWiely.

3. Optical fiber Communications, Gerd Keiser, TMH.,2nd edition,1991

33


COMPUTER NETWORKSCourse Code: 10EC2211

UNIT- IIntroductionOSI, TCP/IP and other networks models, Examples of Networks: NovellNetworks, Arpanet, Internet, Network Topologies WAN, LAN, MAN.UNIT- IIPhysical LayerTransmission media copper, twisted pair wireless, switching andencoding asynchronous communications; Narrow band, broad bandISDN and ATM.UNIT- IIIData Link LayerDesign issues, framing, error detection and correction, CRC, ElementaryProtocol-stop and wait, Sliding Window, Slip, Data link layer in HDLC,Internet, ATM.UNIT-Medium Access Sub LayerALOHA, MAC addresses, Carrier sense multiple access, IEEE 802.XStandard Ethernet, wireless LANS, Bridges.UNIT- VNetwork LayerVirtual circuit and Datagram subnets-Routing algorithm shortest pathrouting, Flooding, Hierarchical routing, Broad cast, Multi cast, distancevector routing.

34

L P C4 0 4

UNIT- VIDynamic RoutingBroadcast routing. Rotary for mobility, Congestion, Control Algorithms General Principles of Congestion prevention policies. Internetworking:The Network layer in the internet and in the ATM Networks.UNIT- VIITransport LayerTransport Services, Connection management, TCP and UDP protocols;ATM AAL Layer Protocol.UNIT- VIIIApplication LayerNetwork Security, Domain name system, SNMP, Electronic Mail; theWorld WEB, Multi Media.

Text Books :1. Computer Networks Andrew S Tanenbaum, 4th Edition. PearsonEducation/PHI

2. Data Communications and Networking Behrouz A. Forouzan.ThirdEdition TMH.,4th edition-2006.

References1. An Engineering Approach to Computer Networks-S.Keshav, 2ndEdition, Pearson Education

2. Understanding communications and Networks, 3rd Edition, W.A.Shay, Thomson

35


ADVANCED DIGITAL SIGNAL PROCESSINGCourse Code: 10EC2212

UNIT- IDiscrete Fourier TransformsProperties of DFT, Linear Filtering methods based on the DFT, Overlap-save, Overlap -Add methods, frequency analysis of signals.UNIT- IIFast Fourier TransformsRadix-2 FFT and Split- Radix FFT algorithms The Goertzel and Chirp Ztransform algorithms.UNIT- IIIDesign Of Iir FiltersDesign of IIR filters using Butterworth & Chebyshev approximations,frequency transformation techniques, structures for IIR systems cascade, parallel, lattice & lattice-ladder structures.UNIT- IVDesign of Fir FiltersFourier series method, Windowing techniques, design of digital filtersbased on least squares method, pade approximations, least squaresdesign, wiener filter methods, structures for FIR systems cascade,parallel, lattice & lattice-ladder structures.UNIT- VMulti Rate Signal ProcessingDecimation by a factor D, Interpolation by a factor I, Sampling rateconversion by a rational factor I/D, Filter design & Implementation forsampling rate conversion.

36

L P C4 0 4

UNIT- VIPower Spectral EstimationEstimation of spectra from finite duration observation of signals, Non-parametric methods: Bartlett, Welch & Blackmann & Tukey methods.UNIT- VIIParametric Methods for Power Spectrum EstimationRelation between auto correlation & model parameters, Yule-Waker &Burg Methods, MA & ARMA models for power spectrum estimation.UNIT- VIIIAnalysis of Finite Wordlength Effects in Fixed-Point DSP SystemsFixed, Floating Point Arhimetic ADC quantization noise & signalquality Finite word length effect in IIR digital Filters Finite word-length effects in FFT algorithms.Text Books:1. Digital Signal Processing Principles, Algorithms Applications byJ.G.Proakis & D.G.Manolokis, PHI.,2nd edition-20092. Discrete Time signal processing - Alan V Oppenheim & Ronald WSchaffer, PHI.,Second Impression - 20073. DSP A Pratical Approach Emmanuel C.Ifeacher Barrie. W. Jervis,Pearson EducationReferences1. Modern spectral Estimation techniques by S. M .Kay, PHI, 1997.

37


DSP PROCESSORS AND ARCHITECTURESCourse Code: 10EC2213

UNIT- IIntroduction to Digital Signal ProcessingIntroduction, A Digital signal-processing system, The sampling process,Discrete time sequences. Discrete Fourier Transform (DFT) and FastFourier Transform (FFT), Linear time-invariant systems, Digital filters,Decimation and interpolation, Analysis and Design tool for DSPSystems MATLAB, DSP using MATLAB.UNIT- IIComputational Accuracy in DSP ImplementationsNumber formats for signals and coefficients in DSP systems, DynamicRange and Precision, Sources of error in DSP implementations, A/DConversion errors, DSP Computational errors, D/A Conversion Errors,Compensating filter.UNIT- IIIArchitectures for Programmable DSP DevicesBasic Architectural features, DSP Computational Building Blocks, BusArchitecture and Memory, Data Addressing Capabilities, AddressGeneration unit, Programmability and Program Execution, Speed Issues,Features for External interfacing.

UNIT- IVExecution Control and PipeliningHardware looping, Interrupts, Stacks, Relative Branch support,Pipelining and Performance, Pipeline Depth, Interlocking, Branchingeffects, Interrupt effects, Pipeline Programming models.

38

L P C4 0 4

UNIT- VProgrammable Digital Signal ProcessorsCommercial Digital signal-processing Devices, Data Addressing modesof TMS320C54XX DSPs, Data Addressing modes of TMS320C54XXProcessors, Memory space of TMS320C54XX Processors, ProgramControl, TMS320C54XX instructions and Programming, On-ChipPeripherals, Interrupts of TMS320C54XX processors, PipelineOperation of TMS320C54XX Processors.UNIT- VIImplementations of Basic DSP AlgorithmsThe Q-notation, FIR Filters, IIR Filters, Interpolation Filters,Decimation Filters, PID Controller, Adaptive Filters, 2-D SignalProcessing.UNIT- VIIImplementation of FFT AlgorithmsAn FFT Algorithm for DFT Computation, A Butterfly Computation,Overflow and scaling, Bit-Reversed index generation, An 8-Point FFTimplementation on the TMS320C54XX, Computation of the signalspectrum.UNIT- VIIIInterfacing Memory and I/O Peripherals to Programmable DSPDevicesMemory space organization, External bus interfacing signals, Memoryinterface, Parallel I/O interface, Programmed I/O, Interrupts and I/O,Direct memory access (DMA). A Multichannel buffered serial port(McBSP), McBSP Programming, a CODEC interface circuit, CODECprogramming, A CODEC-DSP interface example.

39

Text Books:1. Digital Signal Processing Avtar Singh and S. Srinivasan,

Thomson Publications, 2004.2. DSP Processor Fundamentals, Architectures & Features

Lapsley et al. S. Chand & Co, 2000.References :

1. Digital Signal Processors, Architecture, Programming andApplications B. Venkata Ramani and M. Bhaskar, TMH,2004. (10th Print, 2007)

2. Digital Signal Processing Jonatham Stein, John Wiley.(reprint 2009 )

40


IMAGE PROCESSINGCourse Code: 10EC2214UNIT- IImage Processing FundamentalsImage Transforms Fourier Transform, Walsh, Handamard, DCT, Haar,Slant, KL transforms and their properties.UNIT- IIImage EnhancementEnhancement by point processing, Histogram Processing, Enhancementin Spatial domain and in Frequency domain.UNIT- IIIColor Image ProcessingFundamentals Models Pseudo Color image processing Basics Converting to other color spaces Transformations - Color Smoothingand Sharpening Color Segmentation Noise Color NoiseCompression.UNIT- IVImage Filtering and RestorationDegradation Model Diagnolisation of Circulant and Block CirculantMatrices Algebraic approach to restoration- Inverse filtering LMSRestoration Constrained least Squares and iterative restoration,Geometric Transformations.UNIT- VImage CompressionFundamentals Compression Models Lossless and Lossycompressions Compression Standards.

41

L P C4 0 4

UNIT- VIImage Segmentation and Edge DetectionDetection of discontinuities Edge linking and boundary detection Region oriented segmentation use of motion in segmentation Marr-Hildreth Edge Detection Canny Detectors.UNIT- VIIRepresentation and DescriptionVarious schemes Boundary Descriptors Regional Descriptors.

UNIT -VIIIMorphological Image ProcessingPreliminaries Dilation & Erosion Opening & Closing Hit-MissTransformation Morphological algorithms Extension to Grey ScaleImages

Text Books:1. Digital Image Processing - Rafael C.Gonzalez, Richard E. Woods,

Pearson education, 2nd Edition, 3rd Edition, 20082. Digital Image Processing Using MATLAB - Rafael C.Gonzalez,

Richard E.Woods, Steven L.Edding, Pearson Education, 2ndEdition. (5th impression 2009 )

References:1. Fundamentals of Digital Image Processing A.K.Jain, PHI.2. Digital Image Processing William K.Prah, John wilely, 3rd

Edition,2004.3. Fundamentals of Electronic Image Processing Weeks Jr,

SPIC/IEEE series, PHI.

42


EMBEDDED SYSTEMS CONCEPTSCourse Code : 10EC2215

UNIT- IIntroduction to Embedded SystemsEmbedded system, processor in the system, other hardware units,software embedded into a system, exemplary embedded systems,embedded system on chip (SOC) and in VLSI circuit.UNIT- IIProcessor and Memory OrganizationStructural units in a Processor, Processor selection for an embeddedsystem, memory devices, memory selection for an embedded systems,allocation of memory to program cache and memory management links,segments and blocks and memory map of a system, DMA, interfacingprocessors, memories and Input Output Devices.UNIT- IIIDevices and Buses for Device NetworksI/O devices, timer and counting devices, serial communication using theI2 C, CAN and advanced I/O buses between the networked multipledevices, host systems or computer parallel communication between thenetworked I/O multiple devices using the ISA, PCI, PCI-X andadvanced buses.UNIT- IVDevice Drivers and Interrupts Servicing MechanismDevice drivers, parallel port and serial port device drivers in a system,device drivers for internal programmable timing devices, interruptservicing mechanism.

43

L P C4 0 4

UNIT- VProgramming Concepts and Embedded Programming in C and C++Software programming in assembly language(ALP) and in high levellanguage C,C program elements: header and source files andpreprocessor directives, program elements: macros and functions, datatypes ,data structures, modifiers , statements , loop and pointers, queues,stacks , lists and ordered lists, embedded programming in C++,embedded programming in java,C program compiler and cross-compiler , source code engineering tools for embeddedC/C++,optimization of memory needs.UNIT- VIProgram Modelling Concepts in Single and Multi Processor SystemsSoftware - Development ProcessModeling processes for software analysis before softwareimplementation, programming models for event control or response timeconstrained real time programs, modeling of multi processor systems.UNIT- VIIHardware and Software Co Design - IEmbedded System project development, embedded System design andco-design issues in system development process, design cycle in thedevelopment phase for an Embedded System.UNIT- VIIIHardware and Software Co Design IIUse of target system or its Emulator and In-Circuit Emulator (ICE), useof Software tools for Development of an Embedded System, use ofscopes and logic analyzers for System Hardware Tests

44

Text Book:1. Embedded systems: Architecture, programming and design by

Rajkamal, TMH., 2nd Edition, (5th reprint 2010)References:1. Embedded system design by Arnold S Burger, CMP, 20092. An embedded software primer by David Simon, PEA, (6th

Impression - 2008 ).3. Embedded systems design: Real world design be Steve Heath;

Butterworth Heinenann, Newton mass USA 2002, 2nd Edition2003.

4. Data communication by Hayt

45


ADVANCED COMMUNICATION LABCourse Code: 10EC22161. To study Time division multiplexing.2. To study PCM.3. To study the different channel coding and decoding technique.4. Generation and reception of different types of signals like ASK, PSK,FSK.

5. To transmit and receive three separate signal audio, video, tonesimultaneously through satellite link.

6. To transmit PC data through satellite link using a satellitecommunication demonstration unit.

7. Experimentally compare different forms of BPSK, QPSK, OQPSKand analyze their spectrum with spectrum analyzer.

8. Spreading and dispreading using additive white Gaussian noisegeneration/ Gold code and other forms of spreading techniques.

9. Transmit different types of signals suing a ISDN system.10. Analyze the process of data communication in LAN using LAN

trainer and compare the performance different media accesstechniques.

46

L P C0 3 2

4 m.tech Ece Communication 09 11 Verifi

Documents

Transcript of 4 m.tech Ece Communication 09 11 Verifi