4 Architectural LED Frame-Kit (1100Lm/1600Lm) GEN3 w/ 4...

2
TYPE CATALOG# PROJECT H2 H1 8-1/8" H2: 8-5/8" with Top Mounted Connection Box (Standard) H1: 6-1/2" with Loose Connection Box (Field Adjusted) 12-7/8" 5-5/8" 4-1/8" FEATURE: FEATURE: FEATURE: FEATURE: Tel: 323.904.0200 Product specifications subject to change without notice. www.liton.com A DIVISION OF LIGHTING GROUP SPECIFICATION SPECIFICATION SPECIFICATION SPECIFICATION 13W 1100LM/1600LM Ceiling cut-out: 4 3/4" File Located online www.liton.com/spec ID#: 2803_2804 4" Architectural LED Frame-Kit (1100Lm/1600Lm) GEN3 w/ 4" Architectural LED Trim (1100Lm/1600Lm) 4" LED ARCHITECTURAL DOWNLIGHT 4" ARCHITECTURAL LED FRAME-KIT (11W) GEN3 4" ARCHITECTURAL LED FRAME-KIT (11W) GEN3 4" ARCHITECTURAL LED FRAME-KIT (11W) GEN3 4" ARCHITECTURAL LED FRAME-KIT (11W) GEN3 LHALD411 LHALD411 LHALD411 LHALD411 13W LED LHALD411C35-347-D10 LHALD411C35-347-D10 LHALD411C35-347-D10 LHALD411C35-347-D10 LHALD411C35 LHALD411C35 LHALD411C35 LHALD411C35 LHALD411C35-D10P1 LHALD411C35-D10P1 LHALD411C35-D10P1 LHALD411C35-D10P1 LHALD411C35-DIN LHALD411C35-DIN LHALD411C35-DIN LHALD411C35-DIN LHALD411C35UE LHALD411C35UE LHALD411C35UE LHALD411C35UE LHALD411C35UE-D10 LHALD411C35UE-D10 LHALD411C35UE-D10 LHALD411C35UE-D10 LHALD411C35UE-DUN LHALD411C35UE-DUN LHALD411C35UE-DUN LHALD411C35UE-DUN :347V 0-10V 10% Dimming :120V Non-Dimming :0-10V 1% Dimming :120V Incandescent Dimming :120V/277V Non-Dimming (120V/277V) :0-10V 10% Dimming (120V/277V) :UniDim TM Universal Dimming (120V/277V) DRIVER TYPE DRIVER TYPE DRIVER TYPE DRIVER TYPE Blank Blank Blank Blank -EM2 -EM2 -EM2 -EM2 -GTD -GTD -GTD -GTD :None :Emergency (10W) :Generator Device OPTION OPTION OPTION OPTION 4" ARCHITECTURAL LED TRIM (1100LM/1600LM) 4" ARCHITECTURAL LED TRIM (1100LM/1600LM) 4" ARCHITECTURAL LED TRIM (1100LM/1600LM) 4" ARCHITECTURAL LED TRIM (1100LM/1600LM) LRALD4 LRALD4 LRALD4 LRALD4 13W LED LRALD4SSF LRALD4SSF LRALD4SSF LRALD4SSF LRALD4SWF LRALD4SWF LRALD4SWF LRALD4SWF LRALD4WWF LRALD4WWF LRALD4WWF LRALD4WWF :Satin Reflector/Satin Flange :Satin Reflector/White Flange :White Reflector/White Flange FINISH FINISH FINISH FINISH 062 062 062 062 160 160 160 160 :1100 Lm :1600 Lm LUMENS LUMENS LUMENS LUMENS Blank Blank Blank Blank -B25 -B25 -B25 -B25 -B60 -B60 -B60 -B60 :45° :25° :60° BEAM SPREAD BEAM SPREAD BEAM SPREAD BEAM SPREAD Blank Blank Blank Blank -C97 -C97 -C97 -C97 -T17 -T17 -T17 -T17 -T25 -T25 -T25 -T25 -T27 -T27 -T27 -T27 -T27-C97 -T27-C97 -T27-C97 -T27-C97 -T35 -T35 -T35 -T35 -T40 -T40 -T40 -T40 :3000K :3000K, 97CRI** :1700K* :2500K* :2700K :2700K, 97CRI** :3500K :4000K LED LED LED LED * Extended Lead Time may apply. Consult Factory. **Only available in 2700K and 3000K. Ordering example: Ordering example: Ordering example: Ordering example: LHALD411C35UE-DUN/L270/LRALD4SSF062-T17 Application: Application: Application: Application: Architectural-grade recessed LED downlight housing for medium to high ceilings in commercial and architectural spaces. Housing Frame: Housing Frame: Housing Frame: Housing Frame: 16 gauge galvanized plaster ring with black powder coat finish, friction or V-Spring clips secure trim to housing. Mounting: Mounting: Mounting: Mounting: Housing suitable for new construction installations only, Bat-Wing bar hanger brackets adjust vertically 3 1/4" for multiple ceiling types and accepts 1/2" EMT. 26" C- Channel Strut for T-bar ceilings and 27" adjustable linear hanger bars for plaster ceilings or wood/metal joists. Heavy duty 16-gauge, die-formed galvanized steel. Bar hangers optional. Driver: Driver: Driver: Driver: 120V/277V AC 50/60Hz Electronic Direct Current Class 2 driver integrally mounted on large access Junction Box. Power Factor > 0.90. Operating Temperature: -10ºC to +80ºC. Accessible from above or below ceiling. Consult Factory for dimming options and compatible dimmers. Junction Box: Junction Box: Junction Box: Junction Box: 16 gauge pre-wired galvanized steel double Junction Box, 64 cubic-inch for a maximum of (8) #12 AWG wires. Furnished with (10) 3/4'', (2) 1" and (8) Romex knock- outs. Strain clamps to install or remove covers for easy access and ground wire. Equipped with safety standard die-cast aluminum fitting for flex-conduit. Insulation Contact: Insulation Contact: Insulation Contact: Insulation Contact: Non-IC rated housing must be kept 3” from insulation. Dimming: Dimming: Dimming: Dimming: 0-10V dimming option (-D10) works with most 5-Wire 0-10V dimmers. UniDim TM (-DUN) option is a universal dimming system that works with most 3-Wire ELV, 2- Wire Incandescent and 5-Wire 0-10V fluorescent dimmers. Caution: Caution: Caution: Caution: LITON recommends use of surge protectors on the power entering LED Housings. Surge damage is not covered by warranty. Label: Label: Label: Label: cETL Listed Assembled in USA Assembled in USA Assembled in USA Assembled in USA Application: Application: Application: Application: Architectural-grade recessed downlight reflector for medium to high ceilings in commercial and architectural installations. Reflector designed for minimal glare from lamp without sacrificing lumen output. Reflector Construction: Reflector Construction: Reflector Construction: Reflector Construction: One piece, self-flanged dual-reflector LED design enables a clean trim finish, without the need for a secondary trim ring. Heavy-gauge aluminum reflector prevents ugly dents during shipping and installation. Deeply mounted singular LED provides 50 degree visual cutoff for a glare-free appearance. Held in place with two steel pressure v-springs for a tight fit and easy scratch-less removal. Power Connection: Power Connection: Power Connection: Power Connection: LED lamp array is replaceable via on board quick disconnect terminal. Meets CA Title 24 Requirements and other standards restricting the use of Medium Base or Bi-Pin Sockets. Lumen Maintenance: Lumen Maintenance: Lumen Maintenance: Lumen Maintenance: Minimum 50,000 hours L70 life based on ANSI TM-21 calculations from LM80 standardized test results. Thermal Management: Thermal Management: Thermal Management: Thermal Management: Effective thermal dissipation facilitated by integral cast-aluminum, heat sink design for maximum heat rejection to provide long LED life. Thermal Temperature: Thermal Temperature: Thermal Temperature: Thermal Temperature: Heat dissipation facilitated by exposed integral aluminum heat sink to maximize heat rejection in an open air environment. Recommended ambient temperature is below 35 degree celsius to achieve minimum L70 life of 50,000 hours according to LM80 standard. Warranty: Warranty: Warranty: Warranty: Covered by a 5 Year Warranty to be free of defects in materials and craftsmanship. Fixture should not be installed in applications with ambient temperature above 60 degrees C. Doing so will result in reduced lamp life and voided warranty. Safety Labels: Safety Labels: Safety Labels: Safety Labels: ETL/cETL listed to UL1598 and UL8750. Suitable for damp and wet locations. NYC approved: Calendar #41937. Label: Label: Label: Label: cETL Listed Assembled in USA Assembled in USA Assembled in USA Assembled in USA 4" Architectural LED Frame-Kit (1100Lm/1600Lm) GEN3 w/ 4" Architectural LED Trim (1100Lm/1600Lm) 4" Architectural LED Frame-Kit (1100Lm/1600Lm) GEN3 w/ 4" Architectural LED Trim (1100Lm/1600Lm) 2019.08.21 Emergency Options: Emergency LED Battery Back-up available, remotely mounted adjacent to housing by installer. When AC power fails, the device immediately switches to the emergency mode, operating the LEDs for a minimum of 90 minutes. Remote test switch and plate cover included. Optional Generator Transfer Device switches the driver to auxiliary generator power during the loss of normal AC power, (recommended for applications requiring individual circuit switching). Emergency Options: Emergency Options: Emergency Options:

Transcript of 4 Architectural LED Frame-Kit (1100Lm/1600Lm) GEN3 w/ 4...

Page 1: 4 Architectural LED Frame-Kit (1100Lm/1600Lm) GEN3 w/ 4 …liton.eemagroup.com/media/files/cutsheets/LRALD4... · 2019. 8. 21. · PROJECT INFORMATION TYPE: PROJECT: CATALOG#: TYPE

TYPE: PROJECT:PROJECT INFORMATION

CATALOG#:

TYPE

CATALOG#

PROJECT

H2H1

8-1/8"

H2: 8-5/8" with Top Mounted Connection Box (Standard)H1: 6-1/2" with Loose Connection Box (Field Adjusted)

12-7/8"

5-5/8"4-1/8"

FEATURE:FEATURE:FEATURE:FEATURE:

Tel: 323.904.0200 Product specifications subject to change without notice. www.liton.comA D I V I S I O N O F

L I G H T I N G G R O U P

SPECIFICATIONSPECIFICATIONSPECIFICATIONSPECIFICATION13W 1100LM/1600LMCeiling cut-out: 4 3/4"

File Located online www.liton.com/spec ID#

: 2803_2804

4" Architectural LED Frame-Kit (1100Lm/1600Lm) GEN3 w/ 4" Architectural LED Trim (1100Lm/1600Lm) 4" LED ARCHITECTURAL DOWNLIGHT

4" ARCHITECTURAL LED FRAME-KIT (11W) GEN34" ARCHITECTURAL LED FRAME-KIT (11W) GEN34" ARCHITECTURAL LED FRAME-KIT (11W) GEN34" ARCHITECTURAL LED FRAME-KIT (11W) GEN3LHALD411LHALD411LHALD411LHALD411 13W LED

LHALD411C35-347-D10 LHALD411C35-347-D10 LHALD411C35-347-D10 LHALD411C35-347-D10 LHALD411C35 LHALD411C35 LHALD411C35 LHALD411C35 LHALD411C35-D10P1 LHALD411C35-D10P1 LHALD411C35-D10P1 LHALD411C35-D10P1 LHALD411C35-DIN LHALD411C35-DIN LHALD411C35-DIN LHALD411C35-DIN LHALD411C35UE LHALD411C35UE LHALD411C35UE LHALD411C35UE LHALD411C35UE-D10 LHALD411C35UE-D10 LHALD411C35UE-D10 LHALD411C35UE-D10 LHALD411C35UE-DUN LHALD411C35UE-DUN LHALD411C35UE-DUN LHALD411C35UE-DUN

:347V 0-10V 10% Dimming:120V Non-Dimming:0-10V 1% Dimming:120V Incandescent Dimming:120V/277V Non-Dimming (120V/277V):0-10V 10% Dimming (120V/277V):UniDimTM Universal Dimming (120V/277V)

DRIVER TYPE DRIVER TYPE DRIVER TYPE DRIVER TYPE Blank Blank Blank Blank -EM2 -EM2 -EM2 -EM2 -GTD -GTD -GTD -GTD

:None:Emergency (10W):Generator Device

OPTION OPTION OPTION OPTION

4" ARCHITECTURAL LED TRIM (1100LM/1600LM)4" ARCHITECTURAL LED TRIM (1100LM/1600LM)4" ARCHITECTURAL LED TRIM (1100LM/1600LM)4" ARCHITECTURAL LED TRIM (1100LM/1600LM)LRALD4LRALD4LRALD4LRALD4 13W LED

LRALD4SSF LRALD4SSF LRALD4SSF LRALD4SSF LRALD4SWF LRALD4SWF LRALD4SWF LRALD4SWF LRALD4WWF LRALD4WWF LRALD4WWF LRALD4WWF

:Satin Reflector/Satin Flange:Satin Reflector/White Flange:White Reflector/White Flange

FINISH FINISH FINISH FINISH 062 062 062 062 160 160 160 160

:1100 Lm:1600 Lm

LUMENS LUMENS LUMENS LUMENS Blank Blank Blank Blank -B25 -B25 -B25 -B25 -B60 -B60 -B60 -B60

:45°:25°:60°

BEAM SPREAD BEAM SPREAD BEAM SPREAD BEAM SPREAD Blank Blank Blank Blank -C97 -C97 -C97 -C97 -T17 -T17 -T17 -T17 -T25 -T25 -T25 -T25 -T27 -T27 -T27 -T27 -T27-C97 -T27-C97 -T27-C97 -T27-C97 -T35 -T35 -T35 -T35 -T40 -T40 -T40 -T40

:3000K:3000K, 97CRI**:1700K*:2500K*:2700K:2700K, 97CRI**:3500K:4000K

LED LED LED LED

* Extended Lead Time may apply. Consult Factory.**Only available in 2700K and 3000K.

Ordering example:Ordering example:Ordering example:Ordering example: LHALD411C35UE-DUN/L270/LRALD4SSF062-T17

Application: Application: Application: Application: Architectural-grade recessed LED downlight housing for medium to highceilings in commercial and architectural spaces.

Housing Frame:Housing Frame:Housing Frame:Housing Frame: 16 gauge galvanized plaster ring with black powder coat finish, friction orV-Spring clips secure trim to housing.

Mounting:Mounting:Mounting:Mounting: Housing suitable for new construction installations only, Bat-Wing bar hangerbrackets adjust vertically 3 1/4" for multiple ceiling types and accepts 1/2" EMT. 26" C-Channel Strut for T-bar ceilings and 27" adjustable linear hanger bars for plaster ceilings orwood/metal joists. Heavy duty 16-gauge, die-formed galvanized steel. Bar hangersoptional.

Driver: Driver: Driver: Driver: 120V/277V AC 50/60Hz Electronic Direct Current Class 2 driver integrally mountedon large access Junction Box. Power Factor > 0.90. Operating Temperature: -10ºC to+80ºC. Accessible from above or below ceiling. Consult Factory for dimming options andcompatible dimmers.

Junction Box:Junction Box:Junction Box:Junction Box: 16 gauge pre-wired galvanized steel double Junction Box, 64 cubic-inch for amaximum of (8) #12 AWG wires. Furnished with (10) 3/4'', (2) 1" and (8) Romex knock-outs. Strain clamps to install or remove covers for easy access and ground wire. Equippedwith safety standard die-cast aluminum fitting for flex-conduit.

Insulation Contact:Insulation Contact:Insulation Contact:Insulation Contact: Non-IC rated housing must be kept 3” from insulation.

Dimming: Dimming: Dimming: Dimming: 0-10V dimming option (-D10) works with most 5-Wire 0-10V dimmers.UniDimTM (-DUN) option is a universal dimming system that works with most 3-Wire ELV, 2-Wire Incandescent and 5-Wire 0-10V fluorescent dimmers.

Caution:Caution:Caution:Caution: LITON recommends use of surge protectors on the power entering LED Housings.Surge damage is not covered by warranty.

Label: Label: Label: Label: cETL Listed

Assembled in USAAssembled in USAAssembled in USAAssembled in USA

Application:Application:Application:Application: Architectural-grade recessed downlight reflector formedium to high ceilings in commercial and architecturalinstallations. Reflector designed for minimal glare from lampwithout sacrificing lumen output.

Reflector Construction:Reflector Construction:Reflector Construction:Reflector Construction: One piece, self-flanged dual-reflectorLED design enables a clean trim finish, without the need for asecondary trim ring. Heavy-gauge aluminum reflector preventsugly dents during shipping and installation. Deeply mountedsingular LED provides 50 degree visual cutoff for a glare-freeappearance. Held in place with two steel pressure v-springs for atight fit and easy scratch-less removal.

Power Connection: Power Connection: Power Connection: Power Connection: LED lamp array is replaceable via on boardquick disconnect terminal. Meets CA Title 24 Requirements andother standards restricting the use of Medium Base or Bi-PinSockets.

Lumen Maintenance:Lumen Maintenance:Lumen Maintenance:Lumen Maintenance: Minimum 50,000 hours L70 life based onANSI TM-21 calculations from LM80 standardized test results.

Thermal Management:Thermal Management:Thermal Management:Thermal Management: Effective thermal dissipation facilitated byintegral cast-aluminum, heat sink design for maximum heatrejection to provide long LED life.

Thermal Temperature:Thermal Temperature:Thermal Temperature:Thermal Temperature: Heat dissipation facilitated by exposedintegral aluminum heat sink to maximize heat rejection in anopen air environment. Recommended ambient temperature isbelow 35 degree celsius to achieve minimum L70 life of 50,000hours according to LM80 standard.

Warranty:Warranty:Warranty:Warranty: Covered by a 5 Year Warranty to be free of defects inmaterials and craftsmanship. Fixture should not be installed inapplications with ambient temperature above 60 degrees C.Doing so will result in reduced lamp life and voided warranty.

Safety Labels:Safety Labels:Safety Labels:Safety Labels: ETL/cETL listed to UL1598 and UL8750. Suitablefor damp and wet locations. NYC approved: Calendar #41937.

Label: Label: Label: Label: cETL Listed

Assembled in USAAssembled in USAAssembled in USAAssembled in USA

4" Architectural LED Frame-Kit (1100Lm/1600Lm) GEN3 w/ 4" Architectural LED Trim (1100Lm/1600Lm) 4" Architectural LED Frame-Kit (1100Lm/1600Lm) GEN3 w/ 4" Architectural LED Trim (1100Lm/1600Lm)

2019.08.21

Emergency Options: Emergency LED Battery Back-up available, remotely mounted adjacentto housing by installer. When AC power fails, the device immediately switches to the emergency mode, operating the LEDs for a minimum of 90 minutes. Remote test switch and plate cover included. Optional Generator Transfer Device switches the driver to auxiliary generator power during the loss of normal AC power, (recommended for applications requiring individual circuit switching).

Emergency Options: Emergency Options: Emergency Options:

Page 2: 4 Architectural LED Frame-Kit (1100Lm/1600Lm) GEN3 w/ 4 …liton.eemagroup.com/media/files/cutsheets/LRALD4... · 2019. 8. 21. · PROJECT INFORMATION TYPE: PROJECT: CATALOG#: TYPE

TYPE: PROJECT:PROJECT INFORMATION

CATALOG#:

TYPE

CATALOG#

PROJECT

Tel: 323.904.0200 Product specifications subject to change without notice. www.liton.comA D I V I S I O N O F

L I G H T I N G G R O U P

SPECIFICATIONSPECIFICATIONSPECIFICATIONSPECIFICATION

6" Architectural LED Frame-Kit (1200lm/1600lm) w/ 6" Drop Glass LED Trim (1200lm/1600lm)6" LED ARCHITECTURAL DOWNLIGHT

6" ARCHITECTURAL LED FRAME-KIT (1200LM/1600LM)LHALD612LHALD612LHALD612LHALD612 12W LED

LHALD612C035UE LHALD612C035UE LHALD612C035UE LHALD612C035UE LHALD612C035UE-D10 LHALD612C035UE-D10 LHALD612C035UE-D10 LHALD612C035UE-D10 LHALD612C035UE-DHL LHALD612C035UE-DHL LHALD612C035UE-DHL LHALD612C035UE-DHL LHALD612C035UE-DUN LHALD612C035UE-DUN LHALD612C035UE-DUN LHALD612C035UE-DUN LHALD612C035-347-D10 LHALD612C035-347-D10 LHALD612C035-347-D10 LHALD612C035-347-D10 LHALD612C035UE-D10P1 LHALD612C035UE-D10P1 LHALD612C035UE-D10P1 LHALD612C035UE-D10P1

:120V/277V Non-Dimming:120V/277V 0-10V Dimming:Hi-Lume Dimming (120V/277V):120V/277 (2-WIRE,ELV,0-10V):347V 0-10V 10% Dimming:0-10V 1% Dimming

DRIVER TYPE DRIVER TYPE DRIVER TYPE DRIVER TYPE Blank Blank Blank Blank -EM2

:None:Emergency (10W)

-GTD-GTD-GTD-GTD :Generator Transfer Device

OPTIONS /L270 /L270 /L270 /L270 /C260 /C260 /C260 /C260 /C260-J /C260-J /C260-J /C260-J

:Linear Hanger Bar Set:C-Channel Hanger Bar Set:Adjustable C-Channel Hanger Bar Set

HANGER BAR HANGER BAR HANGER BAR HANGER BAR

6" ARCHITECTURAL LED FRAME-KIT (1200LM/1600LM)6" ARCHITECTURAL LED FRAME-KIT (1200LM/1600LM)

13-1/4"

12-1/4"

7-3/4"

Ceiling Cut-out: 6-3/8"Max. Ceiling Thickness: 1-1/4"

7-3/8"

5-7/16"

6" Architectural LED Frame-Kit (1200lm/1600lm) w/ 6" Drop Glass LED Trim (1200lm/1600lm)6" Architectural LED Frame-Kit (1200lm/1600lm) w/ 6" Drop Glass LED Trim (1200lm/1600lm)

6" DROP GLASS LED TRIM (1200LM/1600LM)LRALD6321 12W LED

LRALD6321SSF LRALD6321SWF LRALD6321WWF

:Satin Reflector/Satin Flange:Satin Reflector/White Flange:White Reflector/White Flange

FINISH FINISH FINISH FINISH 102 160 160 160 160

:1200 lm:1600 lm

LUMENS LUMENS LUMENS LUMENS Blank Blank Blank Blank -B25 -B25 -B25 -B25 -B60 -B60 -B60 -B60

:45°:25°:60°

BEAM SPREAD BEAM SPREAD BEAM SPREAD BEAM SPREAD Blank Blank Blank Blank

-T30-C97 -T17 -T17 -T17 -T17 -T25 -T25 -T25 -T25 -T27 -T27 -T27 -T27

-T27-C97 -T27-C97 -T27-C97 -T27-C97 -T35 -T35 -T35 -T35 -T40 -T40 -T40 -T40

:3000K

:3000K, 97CRI*:1700K*:2500K*:2700K

:2700K, 97CRI*:3500K:4000K

-T65 :6500K

LED LED LED LED

* Extended Lead Time may apply. Consult Factory.

Ordering example:Ordering example:Ordering example:Ordering example: LHALD612C035UE-D10P1/C260/LRALD6321SSF102-T17

-EM2-EM2

OPTIONS

-T30-C97

-T27-C90

:3000K, 90CRI

:2700K, 90CRI

-T30-C90 LRALD6321SSF LRALD6321SWF LRALD6321WWF

102

6" DROP GLASS LED TRIM (1200LM/1600LM)LRALD6321

-T65

-T27-C90

-T30-C90

2018.9.21

HOUSING FRAME TRIMApplication: Application: Application: Application: Architectural-grade recessed LED downlight housing for medium to highceilings in commercial and architectural spaces.

Housing Frame:Housing Frame:Housing Frame:Housing Frame: 16 gauge galvanized plaster ring with black powder coat finish.

Suitable for new construction installations only, WingBat- bar hanger brackets adjust vertically 3 1/4" for multiple ceiling types and

accepts 1/2" EMT. 26" C-Channel Strut

for

T-bar ceilings and 27" adjustable linear hanger bars for plaster ceilings or wood/metal joists. Heavy duty 16-gauge, die-formed galvanized steel.

Bar hangers optional.

Driver: Driver: Driver: Driver: 120V/277V AC 50/60Hz Electronic Direct Current Class 2 driver integrally mountedon large access Junction Box. Power Factor > 0.90. Operating Temperature: -10ºC to+80ºC. Accessible from above or below ceiling. Consult Factory for dimming options andcompatible dimmers.

Emergency Options:Emergency Options:Emergency Options:Emergency Options: Emergency LED Battery Back-up available, remotely mounted adjacentto housing by installer. When AC power fails, the device immediately switches to theemergency mode, operating the LEDs for a minimum of 90 minutes. Remote test switch,plate cover and junction box included. Optional Generator Transfer Device switches thedriver to auxiliary generator power during the loss of normal AC power, (recommended forapplications requiring individual circuit switching).

Junction Box:Junction Box:Junction Box:Junction Box: 16 gauge pre-wired galvanized steel double Junction Box, 64 cubic-inch for amaximum of (8) #12 AWG wires. Furnished with (10) 3/4'', (2) 1" and (8) Romex knock-outs. Strain clamps to install or remove covers for easy access and ground wire. Equippedwith standard die-cast aluminum fitting for flex-conduit.

Insulation Contact:Insulation Contact:Insulation Contact:Insulation Contact: Non-IC rated housing must be kept 3” from insulation.

Dimming: Dimming: Dimming: Dimming: 0-10V dimming option (-D10) works with most 5-Wire 0-10V dimmers.UniDimTM (-DUN) option is a universal dimming system that works with most 3-Wire ELV, 2-Wire Incandescent and 5-Wire 0-10V fluorescent dimmers.

Caution:Caution:Caution:Caution: LITON recommends use of surge protectors on the power entering LED Housings.Surge damage is not covered by warranty.

Label: Label: Label: Label: cETL Listed

Assembled in USAAssembled in USAAssembled in USAAssembled in USA

Application:Application:Application:Application: Architectural-grade recessed downlight reflector formedium to high ceilings in commercial and architecturalinstallations. Reflector designed for minimal glare from lampwithout sacrificing lumen output.

Reflector Construction:Reflector Construction:Reflector Construction:Reflector Construction: One piece, self-flanged dual-reflectorLED design enables a clean trim finish, without the need for asecondary trim ring. Heavy-gauge aluminum reflector preventsugly dents during shipping and installation. Deeply mountedsingular LED provides 50 degree visual cutoff for a glare-freeappearance.

Held in place with two steel pressure v-springs for atight fit and easy scratch-less removal.

Power Connection: Power Connection: Power Connection: Power Connection: LED lamp array is replaceable via on boardquick disconnect terminal. Meets CA Title 24 Requirements andother standards restricting the use of Medium Base or Bi-PinSockets.

Lumen Maintenance:Lumen Maintenance:Lumen Maintenance:Lumen Maintenance: Minimum 50,000 hours L70 life based onANSI TM-21 calculations from LM80 standardized test results.

Thermal Management:Thermal Management:Thermal Management:Thermal Management: Effective thermal dissipation facilitated byintegral cast-aluminum, heat sink design for maximum LEDlife. Recommended ambient temperature is below 35 degree

celsiusLM80 standard.

to achieve minimum L70 life of 50,000 hours according to

Warranty:Warranty:Warranty:Warranty: Covered by a 5 Year Warranty to be free of defects inmaterials and craftsmanship. Fixture should not be installed inapplications with ambient temperature above 60 degrees C.Doing so will result in reduced lamp life and voided warranty.

Safety Labels:Safety Labels:Safety Labels:Safety Labels: ETL/cETL listed to UL1598 and UL8750. Suitablefor dry, damp and wet locations. NYC approved: Calendar#41937.

Label: Label: Label: Label: cETL Listed

Assembled in USAAssembled in USAAssembled in USAAssembled in USA

Mounting:Mounting:Mounting:Mounting:

HOUSING FRAME TRIM