4 4IXVSP &IPX (VMZI 350 LPM - Free Air Delivery
Transcript of 4 4IXVSP &IPX (VMZI 350 LPM - Free Air Delivery
6 - 6 HONDA PETROL & YANMAR DIESEL
350 LPM - Free Air Delivery
Product DescriptionThe P17 petrol has become the largest selling model due to its performance of 350 litres of free air. This is one of the largest petrol models you can buy with a GX200 Genuine Honda engine, built for our tough environmental conditions that also meets the Australian emissions standards.
amount of air you receive. It will run die grinders, most common air sanders and 1/2 “ impact guns. This unit is truly manufactured for the professional.
Fitted with the Peerless N75 Pump, full cast iron, slow revving at 1061RPM it is perfect for the Australian conditions. It also features an outstanding 5 year pump warranty along with a conrader idle control valve system (made in America) to cut it in and out with optimal performance when the air demand is required.
along with Stainless steel pressure gauge.Electric start engine does not come with battery, leads or provisions for battery. We can manufacture to your design plus there are other standard designs for each model.
CODE MODEL CYLINDERSPUMP
DISPLACEMENTFREE AIR MAX
PSIMOTOR
PUMP TYPE
PUMP RPM
TANK (L)
00128 P17P 2 17 CFM 350 LPM 145 HONDA GX200 N75 1061 55L
00128-UO P17P UNDER & OVER 2 17 CFM 350 LPM 145 HONDA GX200 N75 1061 5L
00128-2TT P17P 2" TUBE TANK 2 17 CFM 350 LPM 145 HONDA GX200 N75 1061 5L
00128-UTE P17P UTE MATE 2 17 CFM 350 LPM 145 HONDA GX200 N75 1061 32L
00128-SF P17P SKID FEET 2 17 CFM 350 LPM 145 HONDA GX200 N75 1061 55L
00228 P17P TWIN TANK 2 17 CFM 350 LPM 145 HONDA GX200 N75 1061 32L
PUMP UP TIME TO 100PSI:1.05 - 1.10 MIN
1100MM X 450MM X 820MM
ELECTRIC / KEY START:OPTIONAL
95KG
• Genuine Honda Petrol Motor
• Electric Start available
• Pressure Vessel to AS1210
• Manufacturer Data Report available on request
• Smart Start Filters - U.S.A made to reduce start up AMPs by up to 40%
• Cast Iron Peerless Pump - 5 Year Warranty
• Conrader Air operated Idler Contral system (Made in U.S.A)
•
•
•
• Compressed air to AS4637- 2006 standard (Free Air Delivery)
•
• puncture proof
• service kits available!
WARRANTY5 YEAR PUMP / 3 YEAR HONDA
6 - 7www.PEERLESSPRODUCTS.com.au
This slow revving Honda Petrol unit is designed for farm applications. The twin tank model is designed for better portability and stability in the back of vehicles.It's low centre of gravity ensures stability in the back of utilities and on uneven ground The handle is also removeable making it a very compact unit when needed.
The Peerless “Ute Mate” Honda powered compressor is the perfect answer to your utility vehicle needs. The model features huge power all contained in a modestly sized roll cage in order to keep your work horse in top shape, no matter the conditions!
With the performance of the 2" tube tank there is no down time on waiting for a receiver to fill, just instant pressure. If you lose pressure just take your finger off the trigger and then you’re back to full pressure again in less than 2 seconds. Being such a unique design, this frees up valuable space on or in the service truck/van which can help with any space or weight issues you may currently have.
The under & over model is becoming extremely popular for saving space in the back of a ute or trailer. The greatest advantage of these and the tube models is their quick recovery time within 6 seconds you are back to full pressure and there is not much sense in pumping up a large air receiver before you pump up your tyres.
P17 Petrol Twin Tank
P17 Petrol Ute Mate
P17 Petrol 2" Tube Tank
P17 Petrol Under & Over
350 LPM - Free Air Delivery
350 LPM - Free Air Delivery
350 LPM - Free Air Delivery
350 LPM - Free Air Delivery
80KG
110KG
Able to run;• Low & high pressure spray guns• Car tyre inflation gun• Stapling / fitting gun• Framing nail / Grease gun• Chalking gun / Riveter gun• Screw driver• ” Ratchet gun • ” Impact gun• Air duster• 4” Angle grinder • 6” Orbital sander• Air drill• Engine cleaning gun• Sand blasting gun• Air hammer• Hi torque ” Impact gun• ” Die grinder• Plasma Cutter• Air Gauging Tool
Air Tools
PUMP UP TIME TO 100PSI:-
PUMP UP TIME TO 100PSI:0.40 - 0.45 MIN
PUMP UP TIME TO 100PSI:0.40 - 0.45 MIN
PUMP UP TIME TO 100PSI:-
870MM X 410MM X 530MM
570MM X 1000MM X 570MM
1130MM X 550MM X 700MM
640MM X 385MM X 980MM
70KG
95KG