3VMN - ITOPPLUSdemoweb644.itopplus.com/Files/Name2/CONTENT383129420803.pdf · Valve Type : Body...
Transcript of 3VMN - ITOPPLUSdemoweb644.itopplus.com/Files/Name2/CONTENT383129420803.pdf · Valve Type : Body...
Three valve Miniature manifold with compact design having
threaded port for inlet and out let and finds application for isolating
and venting the process media . This is used where space is a
constraint. The isolating bonnets positioned on top and venting
bonnets are positioned on right and left hand side.
Connection :
1/4" (F) For Instrument and process along with 1/8" (F) Drain
Maximum Working Pressure 3000 PSI
40.0
22
..0
93 M
AX
OP
EN
Side View
80.0
ISOLATE
Front View
ISOLATE
PROCESS
22.036.0
(OPEN) MAX. 224mm
1/4" NPT(F)
INSTRUMENT SIDE 2-Nos.
40.0
Ø 7.0 mounting hole 7.2
8.0
1/4" NPT (F) PORT
PROCESS SIDE 2-NOS.
1/8” NPT(F)
10.0
14.0
Top View
Baumer3VMNThree Valve ManifoldsRemote mount (Pipe to Pipe)
Standard Connection
Product
3VMN
Process side
1/4”NPT Female
Instrument side
1/4”NPT Female
Vent/Test
1/8” NPT Female
Page 1 / 2
31-
08 -
12
D
esi
gn a
nd s
peci
ficatio
ns
subje
ct to c
hange w
ithout notic
e
www.baumer.com
Notes : • Drawings are not to scale. • All Dimensions are in mm.
GOST - R
GOST CE
ISOLATE
PROCESS PROCESS
EQUALIZE
D/P
INSTRUMENT
ISOLATE
EQUALIZE
Baumer
Page 2 / 2
31-
08 -
12
D
esi
gn a
nd s
peci
ficatio
ns
subje
ct to c
hange w
ithout notic
e
www.baumer.com
How To Order
24 = 1/4” x 1/4” FF = Female x Female (Std)
TF : Compliance to NACE standard
SG : For Oxygen service, valves are supplied cleaned, degreased and suitably packed.
GH : Material test certificate*
GO : Hydro test certificate
Stem PackingStem Type
N = NPT (ANSI B 1.20.1)
P = BSPP
B = BSPT (BS 21, ISO 7/1)
Threads
CT (std)
DS
P = PTFE (std)
G = Grafoil
Body Material
C = Carbon Steel
S = SS 316 (std)
S4 = SS 304
SL = SS 316L
M4 = Monel 400
M5 = Monel 500
H = Hastelloy C
Size = Inlet x Outlet Connections
(BS 2779, ISO 228/1)
Options
3VMN + C + CT + P + 24 + N+ FF = 3VMN . C . CT . P . 24 . FF . N . Options
Example
To place an order simply refer to the codes in the table.
Valve Type : Body Material + Stem Type + Stem Packing + Size + Connections + Threads + Options
NOTE:
• The weld prepared types are available with female plain end - suitable for socket weld.
• Anti-tamper bonnet - special design on request with locking arrangement if desired.
3VMNThree Valve ManifoldsRemote mount (Pipe to Pipe)
*Material test certificates will be provided for wetted parts only with chemical composition testing. For others, please consult factory.
Note : Specifications and dimensions given in this product catalogue represents the state of engineering at the time of printing.
Modifications may take place and materials specified may be replaced by others without prior notice.