3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select...

27
3shape Trios Intraoral Scanner CU Protocol

Transcript of 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select...

Page 1: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

3shape Trios Intraoral Scanner

CU Protocol

Page 2: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

3shape Trios Protocol

1. Open Trios Icon2. Select Department

Page 3: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Recalibration

• Occasionally the 3Shape TRIOS will need to be recalibrated• The computer will prompt you to place the black recalibration cover on. It will

automatically recalibrate.

Page 4: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Add new Patient

Page 5: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Patient ID = Student Name/Faculty Name

Patient First Name

Patient Last Name

Page 6: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Notes – “ Print Models only”

Page 7: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Next icon of Main Menu – Top of window

Page 8: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Select General Information and add comments “Print Models only”

Page 9: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Select Patient heading-then Select Tooth, type of crown, material, and shade

Page 10: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Select Scanner icon

Page 11: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

To scan: Press trigger once, scan preparation(s), press trigger to stop scanning- Listen to the sound of the scanner, will change when you are not close enough to the teeth- Scan from distal to mesial of the occlusal surface- Scan at 45o angle to the buccal back to the posterior tooth- Scan at 45o angle to the lingual back to the anterior tooth

Page 12: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Digital Impression – Digital Cast

19

It is best if your image count is below500 images per quadrant. You cannot exceed 1000 images.

You can trim the marginand the re-scan on highresolution

Note: It is easier to view the scan if you turn the color off

Page 13: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Trimming the Impression and rescanning

Select tooth to trim

Page 14: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Trimming the Impression and rescanning

Page 15: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Select trimming tool and outline area to be trimmed

Select 2 mm tool

Page 16: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Data removed from trimmed area – ready to be rescanned

Page 17: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Re-scanned margin – blue area

May need to rescan in High Res

Page 18: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Scan the opposing with a similar method: occlusal, buccal, then lingual

Then scan the Buccal occlusion – QUICKLY!

Page 19: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Opposing Digital Cast

Page 20: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Occlusion registered

The occlusion has to be registered very quickly, less data is better.Be sure the alignment is correct.

Page 21: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Path of Placement/undercut analysis

19

Adjust cast for best insertion path.

Page 22: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Select tooth to mark margins

19At this point we are notmarking margins.

Page 23: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Clearance measureMove scale on right until green color

shows slightly on preparations

Click DONE

19

Page 24: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

DO NOT select “Send”

Select “PRINT”

Page 25: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Print Prescription, let faculty signed and give it to Tech. Lab. (Dalen or Chuck)

Page 26: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Now it is OK to “Send”

Page 27: 3shape Trios Intraoral Scanner CU Protocol. 3shape Trios Protocol 1. Open Trios Icon 2. Select Department.

Replace the unit to its designated place and ensure that it is plugged in