3M™ COLD SHRINK™, SPLICES + TERMINATIONS · FIRE BARRIER MOLDABLE PUTTY PADS MPP+ FIRE BLOCK...
Transcript of 3M™ COLD SHRINK™, SPLICES + TERMINATIONS · FIRE BARRIER MOLDABLE PUTTY PADS MPP+ FIRE BLOCK...
3M™ COLD SHRINK™, SPLICES + TERMINATIONSNo Special Tools Required!
• Splice bodies
• 100% factory tested that ensures reliability.
• Silicone insulation
• Simple one piece design
• Delivery system requires no pushing, heat or flames
SMARTbenefits
visit us online at colonialelectricsupply.com
LOWERINSTALLATION
COST*******************
NO SPECIAL TRAINING NEEDED
Colonial Electric guarantees the industry’s top 1000 items will be in-stock and available for pick-up at all branch locations or available for next day delivery from our Customer Service Center, when you need, it or we’ll give you a $100.00 SERVICE GUARANTEE CREDIT!
The Industry’s top 1000 items GUARANTEED IN-STOCK!Colonial Electric Supply’s Guaranteed 1000
FIRE BARRIER MOLDABLE PUTTY PADS MPP+FIRE BLOCK FOAM
FIRE BARRIER CP 25WB+ CAULK
FIRE BARRIER PILLOWS
• ASTM 84 Class 1 (modified)
• Draftstop - helps reduce air infiltration
• Meets IBC and IRC Fireblocking requirements
• Tack-free in approximately 5 minutes
• Bonds to concrete, brick, metals, wood, plastic & cable jacketing
• In accordance with ASTM 814 (Ul14709) & CAN/ULC S115
• Wall opening protective material tested up to 2 hours. (ULC263)
• Provides draft and cold smoke seal
• Helps reduce noise transfers
• Intumescent, Seals against flame spread smoke and toxic gas
• Graphite-free, does not conduct electricity• Re-enterable, and re-useable for new retrofit
installtions• Easy to install
• Firestop tested up to 4 hours• Fire resistance tested for static
construction join systems• Helps minimize sound transfer• Applied with traditional caulking
equipment
• Finish firestop install 3x faster than traditional methods
• No need for multiple tools just one handymax
• Just squeeze the trigger & fill the opening• UL listed alternative to mineral wool,
bricks and runny, ineffective foams
FIRE STOP TESTED UP TO 4 HOURSHEAT-RESISTANT UP TO 240°F (115°C)
FIRESTOP TESTED UP TO 3 HOURS. IN ACCORDANCE WITH ASTM E 814 (UL 1479)
IN ACCORDANCE WITH ASTM E814 (UL 1479) & CAN/ULC S115
HUGE LABOR SAVOR. UP TO 72% TIME SAVINGS!
FIP 1-STEP FIRESTOP FOAM & POWERMAX HPS-4C2