3G Phoenix New Site TWARMU SDD PA1
Transcript of 3G Phoenix New Site TWARMU SDD PA1
CAPTION LIST Document List 1Dokumentnr - Document No
3/001 53-IPA 458 9282 UenDatum - Date Rev.
6.10.2010 A
Site Specifications 2RADIO SITEDESIGNDOCUMENTATION Site Drawings 3(As-Built documentation)
Cabling Documents 4
TWARMU Test & Integration Documents 5
Sub Region:
Northern
Maxis WCDMA 3G Phoenix New Site Project
Template rev C
DOCUMENT LISTPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 3/001 51-IPA Doc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
Document name Document Number Rev
RADIO SITE DESIGN DOCUMENTATION 3/001 53-IPA 458 9282 Uen A
1 DOCUMENT LIST 3/001 51-IPA 458 9282 Uen A
2 SITE SPECIFICATIONS
Situation Plan 153 38-IPA 458 9282 Uen AConfiguration Data 1/127 04-IPA 458 9282 Uen AMaterial Checklist & Reservation Form (Maxis) 2/127 11-IPA 458 9282 Uen AReturn Material NoticeProduct List 193 32-IPA 458 9282 Uen A
3 SITE DRAWINGS
Floor Plan Drawing 193 05-IPA 458 9282 Uen ACable Way Drawing 193 24-IPA 458 9282 Uen AAntenna Placement Information 153 12-IPA 458 9282 Uen ASite Photos 1/2883-IPA A
458 9282 Uen
6.10.2010
458 9282 UenSite Photos 1/2883-IPA A
4 CABLING DOCUMENTS
Cable Distribution Diagram 1/193 18-IPA 458 9282 Uen ACable Distribution Diagram 2/193 18-IPA 458 9282 Uen A
5 TEST & INTEGRATION DOCUMENTS
Antenna System Test Records 1/152 83-IPA AIntegration Test Records 2/152 83-IPA ABIS Check List
Revision History
Rev A First Issue
458 9282 Uen
458 9282 Uen458 9282 Uen
Template rev C
SITUATION PLANPrepared (also subject responsible if other) Document No.
ECM/NH ABD ZAKI 153 38-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
Address: Lot 1134,Tawar, Mukim Tawar,09100 Baling,Kedah
Geographical coordinates:Map Datum: WGS 84
N 05.59921º E 100.77039°
6.10.2010
Crane/Sky lift: NoDetails : N/A
Template rev C
CONFIGURATION DATAPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 1/127 04-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
1 GENERAL
1.1 Survey date
1.2 Ericsson Survey Participants Soh Kok Teng 016 221 4785Chin Kim Voon
1.3 Type of Site Vacant Land (SBC site)
1.4 Type of building1.4.1 Height of building (m.a.g.l.)
1.5 Type of Tower / Mast 3-Legged Tower (SBC site)1.5.1 Tower / Mast height (m.a.g.l.)
1.6 RBS location Cabin
6.10.2010
60m
2010-03-19
N/AN/A
1.6.1 Material Ceiling PU PanelWall PU PanelFloor Cabin Floor
2 RBS TECHNICAL DATA
2.1 No. of sector 32.2 No. and type of Radio Cabinets 1, RBS 6201 30W2.3 Hardware configuration per cabinet 3x22.4 Radio Configuration (on air) 3x12.5 No. of Channel Elements 2242.6 No. of E1 ports 82.7 No. of connected E1's 62.8 EACU No
3 FLOOR LOAD3.1 RBS cabinet (kg)
4 ELECTRICAL DATA4.1 Power requirement -48V DC4.2 No. of mains circuit breaker 1 x 80A4.2.1 Sub DB box No
175 (Fully equipped)
Template rev C
CONFIGURATION DATAPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 1/127 04-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
5 ANTENNA SYSTEM
5.1 ANTENNA 3G5.1.1 Antenna height (m.a.g.l..)5.1.2 Antenna direction5.1.3 Antenna Mechanical Tilting5.1.4 Antenna Electrical Tilting5.1.5 No. of antennas (pcs)
5.1.6 Vendor/Model of antenna
5.1.6.1 Type of antennas
5.1.7 Antenna gain 18dBi 18dBi 18dBi
5.1.8 Antenna dimensions (mm) 2058 / 262 / 149 2058 / 262 / 149 2058 / 262 / 149
Kathrein TribandAntenna
742 271 742 271
51 m180° 330°
3°
Kathrein TribandAntenna
Kathrein TribandAntenna
Sector 3
45 m 49 m90°
3°0°
Sector 1 Sector 2
1 1 1
0°3°
0°
742 271
5.1.9 Max. wind load @ 42m/s (frontal) 370N 370N 370N5.1.10 Weight of antennas (kg)
5.2 FEEDERS
5.2.1 Feeders (3G - WCDMA 2100)5.2.1.1 Type of feeder 1 5/8" 1 5/8" 1 5/8"5.2.1.2 Total no. of feeders 2 2 25.2.1.3 Weight of feeder (kg/m) "1.07 "1.07 "1.075.2.1.4 Min. bending radius (mm)5.2.1.5 Feeder length (m/feeder)
5.3 FEEDERS
5.3.1 Feeders (3G - WCDMA 900)5.3.1.1 Type of feeder 1 5/8" 1 5/8" 1 5/8"5.3.1.2 Total no. of feeders 2 2 25.3.1.3 Weight of feeder (kg/m) "1.07 "1.07 "1.075.3.1.4 Min. bending radius (mm)5.3.1.5 Feeder length (m/feeder)
381
33.0 kg33.0 kg
38152.0 56.0
381 381 38152.0
58.0
33.0 kg
381
56.0 58.0
Template rev C
CONFIGURATION DATAPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 1/127 04-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
6 ANTENNA SYSTEM 2G
6.1 ANTENNA 2G6.1.1 Antenna height (m.a.g.l..)6.1.2 Antenna direction6.1.3 Antenna Mechanical Tilting6.1.4 Antenna Electrical Tilting6.1.5 No. of antennas (pcs)
6.1.6 Vendor/Model of antenna
6.1.7 Type of antennas
N/A N/A
N/A N/AOmni
2 N/A
N/A0°
N/A
Omni
N/A
0°-360°
Sector 1 Sector 2
N/A
54m N/A
0° N/A
N/AN/AN/A
Sector 3
Template rev C
MATERIAL CHECKLIST & RESERVATION FORM [ 3G - rev 2.15)MAXIS BROADBAND SDN BHD
Date 6.10.10 Document no. 2/127 11-IPA 458 9282 UenContractor Ericsson 3G LRD TWARMU Revision BContact Person & No. Khairul Azman (Name<space>Mobile No.) Site Name TAWAR Case No : Date Required (Pls fill as dd.mm.yyyy) Region Northern
Collection Time Site Type SUProject Code SPR / SU No.
QtyMaterial No. W/hse GL Plant Request UOM Contractor Maxis Total Installed Extra Faulty Ttl Return Decomm RMN # Remarks Web Cat50019514 Alarm System, RBS Indoor External 71010 FG10 - EA - - - - - - - - RAD-H60004612 71020 FG10 - EA - - - - - - - - RAD-H50003447 Triplexer, GSM 900,1800 and WCDMA 71020 FG10 EA - - - - - - - - RAD-H50003450 Antenna Kathrein Tri-band, X-Pol, 742 271 71020 FG10 3 EA - 3 3 3 - - - - RAD-H50003451 Antenna, Kathrein Single Band 3G, 742 215 71020 FG10 EA - - - - - RAD-H60004611 Connector 7/16 Male for 7/8" feeder 71020 FG10 EA - - - - - - - - RAD-H60004610 Connector 7/16 Male for 1 5/8" feeder 71020 FG10 24 EA - 24 24 24 - - - - RAD-H60004545 Connector 7/16 Male for 1/2" feeder 71020 FG10 EA - - - - - - - - RAD-H60004482 Connector 7/16 Female for 1/2" feeder 71020 FG10 12 EA - 12 12 12 - - - - RAD-H60004609 Cable, Feeder 1/2"per meter USJ 71020 FG10 72 M - 72 72 72 - - - RAD-H60004608 Cable, Feeder 7/8"per meter USJ 71020 FG10 M - - - - - - - RAD-H60004607 Cable, Feeder 1 5/8"per meter USJ 71020 FG10 676 M - 676 676 676 - - - RAD-H60004549 Grounding kit 7/8" 71020 FG10 EA - - - - - RAD-H60004605 Grounding kit 1 5/8" 71020 FG10 36 EA - 36 36 36 - - - - RAD-H60004604 Clamps, Feeder 7/8" (2-inlet) 71020 FG10 EA - - - - - - - - RAD-H60004603 Clamps, Feeder 1 5/8" (2-inlet) 71020 FG10 EA - - - - - - - - RAD-H60004602 Cable, Jumper 1/2" 1m (M-M) 71020 FG10 6 EA - 6 6 6 - - - - RAD-H60004601 Cable, Jumper 1/2" 2m (M-M) 71020 FG10 6 EA - 6 6 6 - - - - RAD-H60004596 Cable, Jumper 1m (F-M) 71020 FG10 - EA - - - - - - - - RAD-H60004595 Cable, Jumper 2m (F-M) 71020 FG10 12 EA - 12 12 12 - - - - RAD-H60004594 Cable, Jumper 3m (F-M) 71020 FG10 - EA - - - - - - - - RAD-H60004618 Bracket, Downtilt Kit for KRE 1011985 71020 FG10 EA - - - - - RAD-H60004649 Clamp, Feeder 7/8" (3-inlet) 71020 FG10 EA - - - - - RAD-H60004650 Clamp, Feeder 1 5/8" (3-inlet) 71020 FG10 169 EA - 169 169 169 - - - - RAD-H60004655 Connector, N-Type Male For 1/2" Feeder 71020 FG10 EA - - - - - - - - RAD-H60004648 Bracket, Downtilt Kit A- Panel 71020 FG10 3 EA - 3 3 3 - - - - RAD-H60004721 Connector, 1/2" DIN Male Right Angle 71020 FG10 12 EA - 12 12 12 - - - - RAD-H50031263 ASC, RET, RET Cable (ONE SET) 71020 FG10 3 EA - 3 3 3 - - - - RAD-H50003476 ANTENNA,PANEL,MULTIBAND,(900+1800 OR 3G) 71020 FG12 - EA - - - - - - - - RAD-H50003449 Remote Electrical Tilt (RET) 71020 FG10 - EA - - - - - - - - RAD-H50030297 Antenna, System Controller, Version 4 71020 FG10 - EA - - - - - - - - RAD-H60008924 Cable, RET connection, 2.5m 71020 FG10 1 EA - 1 1 1 - - - - RAD-H50030939 Board, RAXB2e 128CE, 2 MS TTI 71020 FG10 3 EA 3 3 3 50031278 NodeB,3206,3x2,30W,RAXB2e,HSTX60,ET-MFX 71020 FG10 EA - - - - - - - - RAD-H50031753 NodeB,6201,3x2,30W,RAXB2e,HSTX60,ET-MFX 71020 FG10 1 EA - 1 1 1 - - - - RAD-H
P-TMA (W900) 3 3 3 3 RET (W900) - - - Ret Cable (W900) - - -
Jumper 3M (M-M) (W900) - - -
Prepared by : Reviewed by : Verified by : Approved by :Maxis Broadband Sdn Bhd Maxis Broadband Sdn Bhd Maxis Broadband Sdn Bhd
SPR / SVO Group Material Settlement Assistant Manager / Manager
Cable, Jumper 1/2" 3m (M-M)
Material Supply By Material Checklist Item Description
1TWARMU MCRF.xls
PRODUCT LISTPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 193 32-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
TU8GE67821
KRY 112 42/3 CC41108548KRY 112 42/3KRY 112 42/3
CSD0955706CSD0955674
KRY 121 63/1
CSD0955676
6.10.2010
CC41108543CC40195111
A535205168
WOD1437098
WOD1437078WOD1437058
ETMFX Card
KRY 121 63/1
ROJ 119 2315/1
KRY 121 63/1
Unit
RET Sector 3
Antenna Sector 2Antenna Sector 1
ASC Sector 1
Part Number
KRE 101 1922/1KRE 101 1922/1
Manuf. Date
RBS Cabinet
Rev Serial Number
RET Sector 1RET Sector 2
Antenna Sector 3
ASC Sector 2ASC Sector 3
102/BFM 901 290
KRE 101 1922/1
Template rev C
SITE PHOTOSPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 1/2883-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
Node B Cabinetode Cab et
Power Cable at RBS
Template rev C
SITE PHOTOSPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 1/2883-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
E1 Cable (Bottom of RBS)
E1 TX/RX Cable (At DDF with Label)
Template rev C
SITE PHOTOSPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 1/2883-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
MCB/ELCB Breaker
Cabin Floor
Template rev C
SITE PHOTOSPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 1/2883-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
Indoor Feeder installation
RF Cable (Top of RBS)
Template rev C
SITE PHOTOSPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 1/2883-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
Jumper cable termination before and after
Termination of Cabinet Grounding Cable (Busbar)To Install Cabinet Grounding Cable
Template rev C
SITE PHOTOSPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 1/2883-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
3G Antenna, ASC & RET (Sector 1)
3G Antenna, ASC & RET (Sector 3)
3G Antenna, ASC & RET (Sector 2)
Template rev C
TWARMU
9282
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
TWARMU
9282
TWARMU
Northern ASC RET
6.10.2010 Installed Installed
Yes/No Yes/No
Yes Yes1/152 83-IPA 458 9282 Uen Yes YesA Yes Yes
Antenna System Measurement ResultMaximum Cable Maximum Cable Maximum Cable Maximum Cable
Sector VSWR Length Cable VSWR Length Cable VSWR Length Cable VSWR Length CableNo Antenna (M2) (meter) Type Antenna (M2) (meter) Type Antenna (M1) (meter) Type Antenna (M1) (meter) Type
GSM900 TX1A TX1B RX1A RX1BOmni (TX1/RX1A) (TX1/RX1B)
GSM1800 TX5B TX5B 100 deg RX5B
MAXIS MOBILE SDN. BHD.
Certificate of AcceptanceCellular Antenna System Installation & Commission
Antenna Model
Work Description:
Document Number:
Revision:
LRD / Site Name:
Region:
3G Sector 1
3G Sector 2
3G Sector 3
FEEDER TEST RESULT
Date:
SPR/SVO Number:
GSM1800 TX5B TX5B 100 deg RX5BOmni (TX5/RX5A) (TX5/RX5B)
GSM900 TX1A TX1B RX1A RX1BSector 1 (TX1/RX1A) (TX1/RX1B)GSM900 TX2A TX2B RX2A RX2BSector 2 (TX2/RX2A) (TX2/RX2B)GSM900 TX3A TX3B RX3A RX3BSector 3 (TX3/RX3A) (TX3/RX3B)GSM900 TX4A TX4B RX4A RX4BSector 4 (TX4/RX4A) (TX4/RX4B)GSM1800 TX6A TX6B RX6A RX6BSector 1 (TX6/RX6A) (TX6/RX6B)GSM1800 TX7A TX7B RX7A RX7BSector 2 (TX7/RX7A) (TX7/RX7B)GSM1800 TX8A TX8B RX8A RX8BSector 3 (TX8/RX8A) (TX8/RX8B)
3G TX1A TX1B RX1A RX1BSector 1 (TX1/RX1A) (TX1/RX1B)
3G TX2A TX2B RX2A RX2BSector 2 (TX2/RX2A) (TX2/RX2B)
3G TX3A TX3B RX3A RX3BSector 3 (TX3/RX3A) (TX3/RX3B)
Note: Cable Length indicated should be length of entire feeder line, excluding ½” inch and jumper cables.
1.42
56
58
1.28
KRE 101 1922/1 (742 271)
Omni
AVA7
1.36
52 52KRE 101 1922/1 (742 271)
KRE 101 1922/1 (742 271) 1.36
AVA7 1.33
1.36
AVA7
AVA7
56 AVA7
58 AVA7
ANTENNA TEST RECORDPrepared (also subject responsible if other) Document No.
ECM/NH ABD ZAKI 1/152 83-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
Test date:
Test performed by:
1 Visual Check
Antenna azimuthAntenna mechanical tilt
2 Feeder System
2.1 Cable types and lengths
Branch A Branch B Branch A Branch B Branch A Branch B(TX1/RX1A) (TX1/RX1B) (TX2/RX2A) (TX2/RX2B) (TX3/RX3A) (TX3/RX3B)
Antenna jumper type
6.10.2010
Sector 190 deg0 deg
FSJ4 FSJ4FSJ4FSJ4
180 deg
Sector 3Sector 2
FSJ4
Sector 2
0 deg
FSJ4
6.10.2010
Sector 3330 deg
0 deg
ABD.ZAKI MAT ISA
Sector 1
Antenna jumper typeAntenna jumper length m
ASC jumper typeASC jumper length m
Feeder typeFeeder length m
Node-B jumper typeNode-B jumper length m
2.2 Maximum SWR < 1,5
Comments
FSJ4
FSJ4
2
6
FSJ4
58AVA7
FSJ42
1FSJ4
56
LDF4
56
LDF46
LDF4LDF4
AVA752
FSJ41
FSJ42
AVA7
6
FSJ42
58
6
AVA7
FSJ4
AVA7
2
LDF4 LDF46
2
6.0
1
FSJ4
11
FSJ4
FSJ4
52
1
AVA7For values, see page 1
For values, see page 1
ANTENNA TEST RECORDPrepared (also subject responsible if other) Document No.
ECM/NH ABD ZAKI 1/152 83-IPA 458 9282 UenDoc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
2.3 Attenuation
Branch A Branch B Branch A Branch B Branch A Branch B(TX1/RX1A) (TX1/RX1B) (TX2/RX2A) (TX2/RX2B) (TX3/RX3A) (TX3/RX3B)
Feeder attenuation dBTriplexer x 2 dBASC jumper attenuation dBNode-B jumper attenuation dB
Total Feeder system atten. dB
Antenna jumper attenuation dB
2.4 Delay
Feeder delay ns
0.32
3.413.33
0.320.32
3.41
212.2
3.33
0.32
0.490.660.66
2.262.18
Sector 3
2.26
0.660.49 0.49
197.1
3.18
0.32
2.03
0.490.66
Sector 2
0.00
197.1
3.18
2.18
212.2 219.8
0.49 0.490.00
Sector 1
0.32
219.8
2.03
0.66 0.66
0.00 0.00 0.00 0.00
Triplexer x 2 nsASC jumper delay nsNode-B jumper delay ns
Total Feeder system delay ns
Antenna jumper delay ns
Total Antenna System delay ns
3 Power Parameters
Primary CPICH Power (Ref)*Primary CPICH PowerMax TX Power DL
4 Cable data
Feeder Cable AVA7 (1 5/8")Feeder Cable AVA5 (7/8")Feeder Cable LDF4 (1/2")FSJ4, 1m jumperFSJ4, 2m jumperFSJ4, 3m jumper
Sector 1
247.3
8.2 8.222.7 22.7
247.3
4.1
228.0 228.0
232.1 232.1
0.0 0.0
22.7
4.1
22.78.2
0.88ns/m
33
4.1
8.2
4.14.1
-
0.920.91
velocity factor3.793.75
0.0 0.08.2
-
-ns
33
250.8
292386
254.9 254.9
33
ns8.24.1
0.039
387
12.3ns
ns/mns/m
0.490
Attenuation
dB
Delay
388293294
0.670
dB/mdB/mdB/mdB
dB
0.3200.1100.063
3.79
250.8
Sector 2 Sector 3
243.2
4.1
22.7
243.2
22.78.2
0.0 0.0
ANTENNA TEST RECORDPrepared (also subject responsible if other) Document No.
ECM/NH ABD ZAKI 1/152 83-IPA Doc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
458 9282 Uen
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1900 1950 2000 2050 2100 2150 2200
Limit : 1.5
M1
VSWRTWARMU TX1/RX1A
R l i 259 CAL ON(COAX) CW OFF
VSW
R
Frequency (1900.0 - 2200.0 MHz)
M1: 1.278 @ 2158.14 MHz
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1900 1950 2000 2050 2100 2150 2200
Limit : 1.5
M1
VSWRTWARMU TX1/RX1B
Resolution: 259 CAL:ON(COAX) CW: OFF
VSW
R
Frequency (1900.0 - 2200.0 MHz)
M1: 1.361 @ 2152.33 MHz
Resolution: 259 CAL:ON(COAX) CW: OFF
Template rev C
ANTENNA TEST RECORDPrepared (also subject responsible if other) Document No.
ECM/NH ABD ZAKI 1/152 83-IPA Doc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
458 9282 Uen
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1900 1950 2000 2050 2100 2150 2200
Limit : 1.5
M1
VSWRTWARMU TX2/RX2A
VSW
R
Frequency (1900.0 - 2200.0 MHz)
M1: 1.364 @ 2144.29 MHz
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1900 1950 2000 2050 2100 2150 2200
Limit : 1.5
M1
VSWRTWARMU TX2/RX2B
Resolution: 259 CAL:ON(COAX) CW: OFF
VSW
R
Frequency (1900.0 - 2200.0 MHz)
M1: 1.358 @ 2154.75 MHz
Resolution: 259 CAL:ON(COAX) CW: OFF
Template rev C
ANTENNA TEST RECORDPrepared (also subject responsible if other) Document No.
ECM/NH ABD ZAKI 1/152 83-IPA Doc respons/Approved Checked Date Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
458 9282 Uen
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1900 1950 2000 2050 2100 2150 2200
Limit : 1.5
M1
VSWRTWARMU TX3/RX3A
VSW
R
Frequency (1900.0 - 2200.0 MHz)
M1: 1.418 @ 2112.89 MHz
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1900 1950 2000 2050 2100 2150 2200
Limit : 1.5
M1
VSWRTWARMU TX3/RX3B
Resolution: 259 CAL:ON(COAX) CW: OFF
VSW
R
Frequency (1900.0 - 2200.0 MHz)
M1: 1.326 @ 2159.30 MHz
Resolution: 259 CAL:ON(COAX) CW: OFF
Template rev C
INTEGRATION TEST RECORDPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 2/152 83-IPA Doc respons/Approved Checked Date A Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
Test date:
Test performed by: ABD.ZAKI MAT ISA
1 Verify LED Status
1.1 LED status
1.2 Verify Node-B Sector
Node-B sector 1
Node-B sector 2
Node-B sector 3 Passed √ Failed
N/A
N/A
Passed √ Failed
N/A
6.10.2010
OK √ Fault
Passed √ Failed
6.10.2010
458 9282 Uen
2 Test Activity Mub Connection
2.1 Verify Mub Connection
IP connectivity
3 Test Activities Network Integration
3.1 Verify Physical Channels in RBS
RBS sector 1 Channels
RBS sector 2 Channels
RBS sector 3 Channels
√ Failed
Passed
Passed
Passed
Failed
N/A
N/A√ Failed
N/A
√ Failed
√Passed
N/A
Template rev D
INTEGRATION TEST RECORDPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 2/152 83-IPA Doc respons/Approved Checked Date A Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
458 9282 Uen
3.2 Call Test
Mobile terminating voice/video call sector 1
Mobile originating voice/video call sector 1
Mobile originating PS call sector 1 (R99)
Mobile originating PS call sector 1 (HSDPA)
Mobile terminating voice/video call sector 2
Mobile originating voice/video call sector 2
Mobile originating PS call sector 2 (R99)
Mobile originating PS call sector 2 (HSDPA)
Passed √ Failed N/A
Passed √ Failed
Failed N/A
√
N/AFailed
Passed
Passed
Passed √
Passed √
√
Passed √ Failed
√
N/A
Passed
N/A
Failed N/A
N/AFailed
Failed
N/A
Mobile terminating voice/video call sector 3
Mobile originating voice/video call sector 3
Mobile originating PS call sector 3 (R99)
Mobile originating PS call sector 3 (HSDPA)
4 System tests
4.1 SMS test
4.2 MMS test
5 External alarm simulation test
Comments
√ Failed N/A
Passed √ Failed N/A
Passed
Passed √ Failed N/A
N/A
√ Failed N/A
√ Failed
√ Failed
Passed
Passed
Passed
√Failed
Passed
N/A
N/A
Template rev D
INTEGRATION TEST RECORDPrepared (also subject responsible if other) Subject Responsible Document No.
ECM/NH ABD ZAKI 2/152 83-IPA Doc respons/Approved Checked Date A Rev. File
ECM/GR/B SHAMSUL ARZEMY A
Project: Maxis WCDMA 3GSite: TWARMU
6.10.2010
458 9282 Uen
Template rev D
CHECKLIST:
Num Item No. Item Description: Installation Quality Standard Result Expected Results CATEGORY ( √ / X ) Remarks
1Hardware installed as per SDD/ inventory Hardware quantity as per installed and SDD Major √
2Check for physical alarm on hardware and software
No physical and software alarmAll Faults LED are OFF on all the cards/modules.
Major√
3Modules are grounded to the plinth Continuity of grounding from Modules to internal-
ground-bar; The reading should be virtually zero (0) Ohms Cable Size – 35 mm Stay wire
Major
√Power Supply cable insulated and terminated at the rectifier (80 MCB – Indoor NodeB or 3 X 32A MCB – Outdoor NodeB) Module back covers are installed.(Support with photos)
Power supply cable are fixed securely and insulated. Termination of all pair resilience power cables to different power supply unit. White (positive) cable tape with red colour tape (appx. 150mm)
Major
√Fitting and bending of RF cable from RFU Module to Feeder inletCable entries are installed.(Support with Photos)
RF cables are terminated correctly and to the respective sector.Bending radius as per standard bending spec
Minor
√Coaxial and power cables fixed securely on cable ladder
Cable connector seals are firmly in place (Node B RBS 3206 Jumper cable)
Major√
Plug in Module is screwed/attached properly and empty slot covered
Plug in module is screwed/attached to equipment properly and empty slot shall be covered to ensure air circulation (when applicable)
Minor
√No excessive E1 cable length between RBS 3206 and DDF/Fiber modem
No excessive E1 cable length. E1 cable should be installed properly without any physical damage
Minor√
Labelling on RBS 3206 Modules indicating LRD
Labelled as per CPC labelling specification Minor√
Labelling on E1 cables top of RBS 3206 Labelled as per CPC labelling specification Minor √Labelling on RF cables on RBS 3206 Labelled as per CPC labelling specification Minor √Labelling on the jumper cable at the DDF Labelled as per CPC labelling specification Minor √Tightness and fit termination for BNC, Siemens, L-Type and RJ45 connectors
No loose connector of BNC, Siemens, L-type, RJ45;BNC connector-neck and rubber insulator are held/clamped securely together by crimp sleeve ring;
Major
RBS 3206 Inventory
Proper Equipment Installation
Alarm
held/clamped securely together by crimp sleeve-ring;√
External – cable and conduit & jumper cable between modules
BTS External cables or cables between the modules on different plinths are routed via external cable entries
Minor
√Ensure all additional items/equipments do not block any electrical and Aircond elements
No elements (ie cabinet, RF feeder, power cable, cable ladder and etc) blocking any electrical and Aircond elements
Minor
√The cabinet fixed firmly. Rack should be mounted at cabin floor firmly unused
hole need to sealedMajor
√All RF Module /System Module must be labelled
All Equipment must labelled as per specs Minor√
Optical fibre cables connection ( If Any) Optical fibre cables are cleaned and connected Major XInternal Cables at Module Cables between the modules on the same plinth are
routed via internal cable entriesMajor
√
4Mobile Termination voice call on Cell 1 Able to initiate and hold voice/video calls for every
TRX in every CellMajor
√Mobile Termination video call on Cell 1 Able to initiate and hold voice/video calls for every
TRX in every CellMajor
√Mobile Termination voice call on Cell 2 Able to initiate and hold voice/video calls for every
TRX in every CellMajor
√Mobile Termination video call on Cell 2 Able to initiate and hold voice/video calls for every
TRX in every CellMajor
√Mobile Termination voice call on Cell 3 Able to initiate and hold voice/video calls for every
TRX in every CellMajor
√Mobile Termination video call on Cell 3 Able to initiate and hold voice/video calls for every
TRX in every CellMajor
√
5The inlet plate is well sealed and unused feeders are covered
No hole in the inlet plate Minor√
Cable tie/wraps as per CPC spec Weather resistant tie/wraps used as per CPC specification
Minor√
Cables are correctly threaded into opening at the feeder inlet
All cables correctly threaded into opening at feeder inlet according to BSSD and RANO agreed specification
Major
√No excessive RF cable bending and bending radius in spec
No excessive RF cable/Fiber Optics bending Major√
Proper bracket support for splitter/branching feeder
Proper bracket support for splitter, branching feeder Minor√
TRX Functionality
Antenna System
CHECKLIST:
Num Item No. Item Description: Installation Quality Standard Result Expected Results CATEGORY ( √ / X ) Remarks
6Labelling of RF cable on RBS3206 as per CPC spec
Labelled with LRD, feeder length, antenna configuration as per CPC specificationeg:JAMPMU/45M/TX2/RX2A
Minor
√Labelling of RF cable before/after inlet, before after jumper
Label RF cable configuration on before/after inlet, before antenna jumper as per CPC specification
Minor√
Grounding of all RF cables (outdoor) RF cables are grounded with grounding kits to the external-ground-bar, EGB (cabin) and external-ground-bar (tower). RF grounding installed at the inlet and near the antenna.
Major
XGrounding for all ASC / RET All ASC / RET are grounded to the EGB Major √Verify RETs installed defined in LMT.(Support with Photos)
All RETs installed at site should be defined in LMT Major√
No physical damage of connectors No physical damage of connectors Major √No oxidation/corrosion of the connectors No oxidation/corrosion of the connector Major √All RF connectors must be securely tightened All RF connectors must be securely tightened; Major
√All RF external connectors must be sealed with 3M tape (inner & outer)
All RF external connectors must be sealed with 3M tape (for waterproofing and heat shrinking) (including cable between RET and ASC )
Major
√7
WCDMA UTRAN (FDD) TXRX1A, Frequency Range 1920MHz – 1980MHz
Major√
WCDMA UTRAN (FDD) TXRX1A, Frequency Range 2110MHz – 2170MHzWCDMA UTRAN (FDD) TXRX1B, Frequency Range 1920MHz – 1980MHz
Major√
WCDMA UTRAN (FDD) TXRX1B, Frequency Range 2110MHz – 2170MHzWCDMA UTRAN (FDD) TXRX2A, Frequency Range 1920MHz – 1980MHz
Major√
WCDMA UTRAN (FDD) TXRX2A, Frequency Range 2110MHz – 2170MHzWCDMA UTRAN (FDD) TXRX2B, Frequency Range 1920MHz – 1980MHz
Major√
WCDMA UTRAN (FDD) TXRX2B F
Labeling
VSWR <1.5; forIn building < 1.5or < a value specify by Eng in the remark column. VSWR SPEC
1 Kathrein 742212 (VSWR less 1.5)2 Triband Agus (VSWR or less 1.5)(any other antenna is based on manufacturer’s spec)
Antenna Information
WCDMA UTRAN (FDD) TXRX2B, Frequency Range 2110MHz – 2170MHzWCDMA UTRAN (FDD) TXRX3A, Frequency Range 1920MHz – 1980MHz
Major√
WCDMA UTRAN (FDD) TXRX3A, Frequency Range 2110MHz – 2170MHzWCDMA UTRAN (FDD) TXRX3B, Frequency Range 1920MHz – 1980MHz
Major√
WCDMA UTRAN (FDD) TXRX3B, Frequency Range 2110MHz – 2170MHz
8Visual check on cleanliness of cabin floor/wall (Support with Photos)
Cabin floor/wall is clean Minor√
Rubbish debris are disposed Rubbish and debris are disposed Minor √All loose item are removed from site All loose item are removed from site Minor √Ensure holes are sealed due to remove of former existing equipment
Ensure hole are sealed Minor√
9Simulate Opto 1 Major XSimulate Opto 2 Major XSimulate Opto 3 & Opto 6 Major XSimulate Opto 8 Major X
10Certificate of Acceptance (CoA) to be made available at site
Available with complete information at site Major√
Integration and Antenna System Test Records to be made available during BIS
Available with complete information at site Minor√
Photo Templates (RBS 3206) Attached upon submission as per format agreed between RANO and ERICSSON
Major√
11Cabinet door key 1 sets per site. Minor XOut door Unit Must be secured with Security bar or cage. Minor XDC power disturbution Rectifier module operate without alarm. Major XAC power Power cable termination secured & tighten. Major XBattery backup Min 4 hours Minor XVentilation fan Ensure ventilation fan function and operate with
accepted temperature.Minor
X
Documentation
RBS 3106 (Outdoor 3G NB)
All stand alone 3G RBS 3206 / Outdoor cabinet T5 / need to be equipped with EAS alarm as per Maxis
standard.
8.0 Cleanliness
EAS Alarms