3G Huawei New Sites Parameter Setting Guideline V2.1

5/28/2018 3G Huawei New Sites Parameter Setting Guideline V2.1

1/8

www.huawei.com

Huawei 3G Parameter

Setting Guideline V2.1

Ju ne, 2011

Huawei RNP/RNO Team


2/8

HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential

Cell level Script

ADD UCELLHSDPA: CellId=XXXXX, AllocCodeMode=Automatic, HsPdschMaxCodeNum=10,

HsPdschMinCodeNum=3, CodeAdjForHsdpaSwitch=ON;

ADD UCELLHSUPA:CELLID=xxxxx, EAGCHCODENUM=1, ERGCHEHICHCODENUM=1,

MAXTARGETULLOADFACTOR=75, NONSERVTOTOTALEDCHPWRRATIO=0;

MOD UCELLALGOSWITCH: CellId=XXXXX, NBMLdcAlgoSwitch=UL_UU_LDR-1&DL_UU_LDR-

1&CELL_CODE_LDR-1&CELL_CREDIT_LDR-1;

ADD UCELLLDR:CELLID=xxxxx, DLLDRFIRSTACTION=CodeAdj, DLLDRSECONDACTION=BERateRed,DLLDRTHIRDACTION=CSInterRatShouldNotLDHO, DLLDRFOURTHACTION=PSInterRatShouldNotLDHO,

ULLDRFIRSTACTION=BERateRed, ULLDRSECONDACTION=CSInterRatShouldNotLDHO,

ULLDRTHIRDACTION=PSInterRatShouldNotLDHO;

MOD UCELLCAC: CellId=XXXXX, UlTotalEqUserNum=160;

MOD UCELLSELRESEL: QualMeas=CPICH_ECNO, Qqualmin=-18, SsearchRat=1;(non-border)

MOD UCELLSELRESEL: QualMeas=CPICH_ECNO, Qqualmin=-16, SsearchRat=1;(border)

Page 2


3/8


HSUPA Parameter Setting

Basic Parameter ValueEAGCHCODENUM 1

ERGCHEHICHCODENUM 1

MAXTARGETULLOADFACTOR 75

NONSERVTOTOTALEDCHPWRRATIO 0

ADD Code Number for E-AGCH = 1 , Code Number for E-RGCH/E-HICH =1 and MaxTargetUlLoadFactor =75% .

ADD UCELLHSUPA:CELLID=xxxxx, EAGCHCODENUM=1, ERGCHEHICHCODENUM=1,

MAXTARGETULLOADFACTOR=75, NONSERVTOTOTALEDCHPWRRATIO=0;

Activate HSUPA Service (during SSV please check the HSDPA service whether is active. If not activate, must

activate this service)

ACT UCELLHSUPA: CellId=xxxxx;


4/8


Call Admision Control Parameter Setting

Keep HSDPA Maximum user to 64 and Keep HSUPA Maximum user to 20 (as

Huawei Default)

To Optimize the call block cause by congestion in power, the

UlTotalEqUserNum need to modify as 160

MOD UCELLCAC: CellId=xxxxx, UlTotalEqUserNum=160;

UCELLCAC Parameter Value Default

ULTOTALEQUSERNUM 160 No

MAXHSDPAUSERNUM 64 Yes

MAXHSUPAUSERNUM 20 Yes


5/8


coverage area BorderSide (HUAWEI) Side (HUAWEI)

Parameter Name Value Parameter Name Value

Qsearch I 7 (Always) QQUALMIN -16

FDD REP QUANT Ec/N0 QUALMEAS CPICH_ECNO

FDD Qmin 5 (-10dB) SSEARCHRAT 2 (EcNo= -12 dB)

Side (NSN) Side (HUAWEI)


* Always QQUALMIN -16

* Ec/N0 QUALMEAS CPICH_ECNO* -10dB SSEARCHRAT 2 (EcNo= -12 dB)

coverage area non BorderSide (HUAWEI) Side (HUAWEI)


Qsearch I 7 (Always) QQUALMIN -18

FDD REP QUANT Ec/N0 QUALMEAS CPICH_ECNO

FDD Qmin 7 (-12dB) SSEARCHRAT 1 (EcNo= -16 dB)

Side (NSN) Side (HUAWEI)


* Always QQUALMIN -18

* Ec/N0 QUALMEAS CPICH_ECNO

* -12dB SSEARCHRAT 1 (EcNo= -16 dB)

Page 5

Cell Reselection Parameter

Siemens Nokia

QRSHI qSearchI

FDDREPQTY

Ec/No by default

FDDQMI fddQMin

*


6/8


RNC-Oriented Coverage-Based Inter-RAT

Handover Measurement Algorithm Parameters

Page 6

InterRAT Parameter ValueINTERRATPERIODREPORTINTERVAL D1000

HYSTFORINTERRAT 0

INTERRATCSTHD2DECN0 -14

INTERRATCSTHD2FECN0 -12

INTERRATCSTHD2DRSCP -98

INTERRATCSTHD2FRSCP -95

INTERRATHTHD2DECN0 -15

INTERRATR99PSTHD2DECN0 -15INTERRATHTHD2FECN0 -13

INTERRATR99PSTHD2FECN0 -13

INTERRATHTHD2DRSCP -110

INTERRATR99PSTHD2DRSCP -105

INTERRATHTHD2FRSCP -107

INTERRATR99PSTHD2FRSCP -102

INTERRATREPORTMODE PERIODICAL_REPORTING

HYSTFOR2D 4

HYSTFOR2F 4TRIGTIME2D D320

TRIGTIME2F D1280


7/8HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 7

LDR Parameter

Recommeded LDR Action Sequence to reduce the congestion

LDR Parameter Value

DLLDRFIRSTACTION CodeAdj

DLLDRSECONDACTION BERateRed

DLLDRTHIRDACTION CSInterRatShouldNotLDHO

DLLDRFOURTHACTION PSInterRatShouldNotLDHO

ULLDRFIRSTACTION BERateRedULLDRSECONDACTION CSInterRatShouldNotLDHO

ULLDRTHIRDACTION PSInterRatShouldNotLDHO


8/8HUAWEI TECHNOLOGIES Co., Ltd. HUAWEI Confidential Page 8

3G Huawei New Sites Parameter Setting Guideline V2.1

Documents

Transcript of 3G Huawei New Sites Parameter Setting Guideline V2.1