3D STRUCTURED LIGHT (3D TOOLBOX) … OQ RST TTI... · 3d structured light (3d toolbox) operator...
2
713-630-0505 Ü www.ttoolboxes.com 3D STRUCTURED LIGHT (3D TOOLBOX) OPERATOR QUALIFICATION TRAINING INCLUDING REMAINING STRENGTH OF CORRODED PIPE (RSTRENG®) OPERATOR QUALIFICATION TRAINING This training program is an dynamic (1) day course that covers the 3D Structured Light Technology(3D Phase Measurement Profilometry) and the procedures to assess corrosion, dents, gouges and related defects and the RSTRENG ® training and certification course. At the completion of the course and after passing written and practical exams, you will be OQ Certified for the 3D Structured Light Procedure and successfully completed the training necessary for OQ of RSTRENG Evaluation. The 3D Toolbox is a portable, field ruggedized system for measuring and analyzing metal loss and mechanical damage primarily on pipes. The process is a simple, three step approach: Ü Measure the 3D pipe features using the 3D Camera Ü Analyze the 3D features to identify features of interest. Ü Export data features for post processing in RSTRENG and dents analysis. Instructor: Joe Pikas INDUSTRY TENURE (47 Years) Ü Technical Toolboxes – 2012 to Present Ü HDR|Schiff – Senior Corrosion Consultant - 2010 - 2012 Ü Mistras - IMPro Technologies – Vice President of Pipeline Integrity - 2008 - 2010 Ü Matcor – Vice President of Houston Operations - 2002 – 2008 Ü Williams Gas Pipelines (Transco) – Pipeline, Corrosion Control, Risk, Integrity, GIS, Pigging, 1966 – 2002 AWARDS Ü NACE Distinguished Service Award for 2009. Ü Received industry award in 2002 with the Utmost Respect and Gratitude from AGA, GTI, INGAA, NACE, OPS, and PRCI International. Ü Received Long Neck Award from Big Inch Marine in the research and development for pre-fabricated isolating flanges. Ü Received Brandon Award for Outstanding Service from the Coating Society of the Houston Area. PAPERS PUBLISHED Over 40 Papers Published: FFS Using 3D Structured Light and Pipeline Integrity From AC Mitigation, Lightning, Cased Casings, Pipe Defect Assessment, Leak Detection, Guided Wave Testing, Coatings, Corrosion Inhibition, MIC, ILI, Risk Assessment, Direct Assessment, GIS to Pipeline Integrity. Where: Technical Toolboxes 3801 Kirby Dr. #501 Houston, TX 77098 When: November 5, 6 or 7, 2013 Price: $275 per student Ü 7 PDHs Available
Transcript of 3D STRUCTURED LIGHT (3D TOOLBOX) … OQ RST TTI... · 3d structured light (3d toolbox) operator...
713-630-0505 Ü www.ttoolboxes.com
3D STRUCTURED LIGHT (3D TOOLBOX) OPERATOR QUALIFICATION TRAINING INCLUDING REMAINING STRENGTH OF CORRODED PIPE
(RSTRENG®) OPERATOR QUALIFICATION TRAINING
This training program is an dynamic (1) day course that covers the 3D Structured Light Technology(3D Phase Measurement Profilometry) and the procedures to assess corrosion, dents, gouges and related defects and the RSTRENG ® training and certification course. At the completion ofthe course and after passing written andpractical exams, you will be OQ Certifiedfor the 3D Structured Light Procedureand successfully completed the training necessary for OQ of RSTRENG Evaluation.
The 3D Toolbox is a portable, field ruggedized system for measuring and analyzing metal loss and mechanical damage primarily on pipes. The process is a simple, three step approach:
Ü Measure the 3D pipe features using the 3D Camera
Ü Analyze the 3D features to identify features of interest.
Ü Export data features for post processing in RSTRENG and dents analysis.
Instructor: Joe Pikas
INDUSTRY TENURE (47 Years)
Ü Technical Toolboxes – 2012 to PresentÜ HDR|Schiff – Senior Corrosion
Consultant - 2010 - 2012Ü Mistras - IMPro Technologies – Vice
President of Pipeline Integrity - 2008 - 2010
Ü Matcor – Vice President of Houston Operations - 2002 – 2008
Ü Williams Gas Pipelines (Transco) – Pipeline, Corrosion Control, Risk, Integrity, GIS, Pigging, 1966 – 2002
AWARDSÜ NACE Distinguished Service Award for
2009.Ü Received industry award in 2002 with the
Utmost Respect and Gratitude from AGA, GTI, INGAA, NACE, OPS, and PRCI International.
Ü Received Long Neck Award from Big Inch Marine in the research and development for pre-fabricated isolating flanges.
Ü Received Brandon Award for Outstanding Service from the Coating Society of the Houston Area.
PAPERS PUBLISHED
Over 40 Papers Published:
FFS Using 3D Structured Light and Pipeline IntegrityFrom AC Mitigation, Lightning, Cased Casings, Pipe Defect Assessment, Leak Detection, Guided Wave Testing, Coatings, Corrosion Inhibition, MIC, ILI, Risk Assessment, Direct Assessment, GIS to Pipeline Integrity.
Where: Technical Toolboxes 3801 Kirby Dr. #501 Houston, TX 77098
When: November 5, 6 or 7, 2013
Price: $275 per student
Ü7 PDHs
Available
* By signing above I commit to paying the course fee when invoiced
Technical Toolboxes3801 Kirby Drive, Suite 520
Houston, TX 77098Tel: 713-630-0505Fax: 713-630-0560
Email: [email protected]
Payment by Credit Card
CC Number
Expiration Date
Signature*
Circle One: VISA MasterCard AMEX
Name
Company
Address
Address
City, State, ZIP
Phone/Mobile
Fax
Country
Course Date: November 5, 6 or 7, 2013
Course Cost: $295 per person
Please complete the attached formand fax to TTI at 713-630-0560
CLASS OUTLINE AND DAILY SCHEDULE
8AM-12NoonWelcome and Opening Remarks
Participant ExpectationsBrief Description of 3D Structured Light (3D Phase Measurement Profilometry) Technology
3D Toolbox IntroductionPit Gage Measurements vs. 3D ToolboxIndustry DesiresAnalysis
3D Pit Gage Operating InstructionsTaking 3D PhotoAnalysisExport to B31.G/RSTRENG or Excel for
Dent AnalysisReports
Practice Using 3D ToolboxCorrosionDentsGouges
Lunch at Mucky Duck provided and included in course fee
1PM-5 (Most likely completion by 3PM)
Regulatory Compliance – USA Codes192 Subpart O195Industry Standards NACEASME
RSTRENG® Course
Review
Test for Operator Qualification (OQ)CertificatesOperator QualificationsContinuing Education Units
713-630-0505 Ü www.ttoolboxes.com
Ü
Terms and Conditions: One registration is required per person. Upon receipt of your above registration, an invoice will be generated for payment. Payment is due 30 days from receipt of invoice. Full price of the course fee will be refunded provided written cancellation is received 3 weeks prior to course date. A cancellation after the deadline will receive full credit towards a future date for the same course.
3D STRUCTURED LIGHT (3D TOOLBOX) OPERATOR QUALIFICATION TRAINING INCLUDING REMAINING STRENGTH OF CORRODED PIPE
(RSTRENG®) OPERATOR QUALIFICATION TRAINING
