3_CUTSHEET_LIDPLUGGER_CLPS_G
-
Upload
del-packaging -
Category
Documents
-
view
216 -
download
4
description
Transcript of 3_CUTSHEET_LIDPLUGGER_CLPS_G
DEL Packaging, Ltd
Lid Pluggers | Model: CLPS-G
Cap Lidding Plugging System - Gluer
Applications
- Straight-walled containers
- Plastic, metal or composite canisters
- 2” - 8” diameter containers and lids/plugs
- 2” - 12” height containers
- Round canisters and lids
This system features a rotary lid plugging system with aglue applicator. A servo in-feed timing screw is utilized to transfer the container from the glue drum roller assembly into the star-wheel and guide assembly of the CLPS-G lidder. The glue roll drum features an external hot oil recirculating system and hot melt glue reservoir. The container travels through a dual-timing screw feed system to tilt the container forward as it spins in the pocket of the timing screw. A �ne bead of glue is applied to the inside diameter of the canister as it travels underneath the glue drum roller assembly. A cap feeding system is integrated with the CLPS-G to provide a continuous �ow of caps to the lidder to sustain the required throughput.
PProduct names, logos, brands and other trademarks featuredare the property of their respective trademark holders
Glue Applicator
Close-up of the star-wheel
Experience the DEL Di�erence
Contact DEL Packaging, Ltd
18113 Telge Road | Cypress, TX 77429Phone: 281.653.0099 | Fax: 281.653.0082http://www.delpackaging.com | [email protected] Lid Pluggers | Model: CLPS-G
Available Options
- Rotary cap feeder
- Conveyors (table-top, air, etc.)
- Coupon / lea�et inserters
- Elevator cap sorter feeder
- Stainless Steel (wash-down) construction
- Ethernet and communication modules
- Electrical and control system upgrade
- Digital height and diameter adjust packages
- All domestic and international voltages to meet UL and CE requirements
- Cap detection with reject (�ber optic sensors and/or vision technology)
Speci�cations
- Stainless steel shafting, sheet metal (#3 �nish),
and structural tubing
- 4 1/2" x 15' table top conveyor
- Stainless steel Imperial hardware
- Clear anodized aluminum
- Black oxide chain, pulleys & sprockets
- Dodge Tigear gear boxes & bearings
- SMC Pneumatics
- Clear Polycarbonate guarding
- Plastic articulating foot pads
- Height adjustment kit with digital readout indicator
- THK linear guides
- White virgin Te�on timing screws
- Hand wheel & indicator for height adjustments (3.5" - 9.5" range)
PRODUCT FLOW
DIRECTION
57.52 49.63
145.40
259.25
22.94
144.70
53.81
OIL
HEA
TER
PM-150
PREMELTERGLUE
POWER DROP,480/60/3,
50 AMP SER.
POWER DROP,480/60/3,
15 AMP SER.71.84
24.58
MAIN CONTROL PANEL
OPERATOR INTERFACE PANEL
AIR DROP 30 CFM @ 80 PSI
END TRANSFER FROMCUSTOMER CONVEYER
CAN STOP
AIR DROP 1 CFM @ 80 PSI
APPLICATOR CLPS-GCAPPERGLUE
16' GLUE HOSE OVERHEAD
TIMING SCREW, W/SERVO MOTOR
POWER DROP, 480/60/3, 60 AMP SER.
CAP DETECTOR
CAN CATCH PAN
PRODUCT FLOW
DIRECTION
MALCO 209
MALCO 209
MA
LCO 209
MALCO
209
MALCO 209
MALCO 209
MALCO 209B13133-8
MALCO 209
MALCO 209
39.00
97.07
102.2580.75
PREMELTERHEATER
OIL
ROTARY CAPPERHEIGHT ADJUSTMENT
GLUE APPLICATORHEIGHT ADJUSTMENT
GLUE APPLICATOR CLPS-G
CEILING SUPPORTS
CUSTOMER CONVEYOR
TELESCOPINGCAP CHUTE
TELESCOPING AREA
BLOWER
OPERATOR INTERFACE PANEL