3B(Kyoto/MT 61082)4 For IEC use only INTERNATIONAL...
4
SEABB/KS 19087-829 3b(kyoto)4 reprt from mt61082.doc Created: 99-10-08, Printed: 99-10-08 Keywords: 1999, report, maintenance, kyoto, 6108261082 For IEC use only 3B(Kyoto/MT 61082)4 INFORMATION 1999-10 INTERNATIONAL ELECTROTECHNICAL COMMISSION Technical Committee No. 3: Documentation and graphical symbols Subcommittee 3B: Documentation Maintenance report to the Kyoto meeting on IEC 61082: Preparation of documents used in electrotechnology. 1 Membership The maintenance team consists actually of 1 person, the Convenor. 2 Application of the standard IEC 61082 (series) has been available for long time and experiences with the use of the standard is well available. Different Parts or whole series has bees referred in several standards like IEC 60204-1 and IEC 61506 or EN 50178 and EN 50131-7. 3 Input The maintenance cycle for IEC 61082 has been decided at the last meeting of SC3B in Charlottenlund and the questionnaire, 3B/259/Q, for feedback on its maintenance has been sent June 1999. The document 3B(Kyoto/Secretariat)5 Maintenance report to the Kyoto meeting on IEC 61082: Preparation of documents used in electrotechnology. shows the answers received. The following are some important aspects proposed be Sweden: More parts might have to be added Aspects on the documentation of equipment comprising a combination of hardware and software and data should be strongly emphasized. This subject might be necessary to deal with in a separate part. Aspects relating to the preparation and use of documents electronically should be considered. Aspects relating to the use of IEC 61346 and the consequences and benefits with regard to reuse should be further emphasized. 4 Collection of change requests For the maintenance of the 61082-series annex A Cumulative list of change proposals to IEC 61082 Preparation of documents used in electrotechnology, should be amended based on discussion about 3B(Kyoto/Secretariat)5 Maintenance report to the Kyoto meeting on IEC 61082: Preparation of documents used in electrotechnology. . 4.1 Part 1: General requirements Editorial updating taking into account Amdt. 1:1995 and Amd. 2:1996, adaptation to other updated standards, e.g. IEC 61346, modernising of examples, etc. are natural parts of the revision.
Transcript of 3B(Kyoto/MT 61082)4 For IEC use only INTERNATIONAL...
SEABB/KS 19087-829 3b(kyoto)4 reprt from mt61082.docCreated: 99-10-08, Printed: 99-10-08Keywords: 1999, report, maintenance, kyoto, 6108261082
For IEC use only3B(Kyoto/MT 61082)4
INFORMATION1999-10
INTERNATIONAL ELECTROTECHNICAL COMMISSION
Technical Committee No. 3: Documentation and graphical symbols
Subcommittee 3B: Documentation
Maintenance report to the Kyoto meeting on IEC 61082: Preparation ofdocuments used in electrotechnology.
1� Membership
The maintenance team consists actually of 1 person, the Convenor.
2� Application of the standard
IEC 61082 (series) has been available for long time and experiences with the use of the standardis well available. Different Parts or whole series has bees referred in several standards like IEC60204-1 and IEC 61506 or EN 50178 and EN 50131-7.
3� Input
The maintenance cycle for IEC 61082 has been decided at the last meeting of SC3B inCharlottenlund and the questionnaire, 3B/259/Q, for feedback on its maintenance has been sentJune 1999. The document 3B(Kyoto/Secretariat)5 Maintenance report to the Kyoto meeting onIEC 61082: Preparation of documents used in electrotechnology. shows the answers received.
The following are some important aspects proposed be Sweden:
Ø More parts might have to be added
Ø Aspects on the documentation of equipment comprising a combination of hardware andsoftware and data should be strongly emphasized. This subject might be necessary to dealwith in a separate part.
Ø Aspects relating to the preparation and use of documents electronically should be considered.
Ø Aspects relating to the use of IEC 61346 and the consequences and benefits with regard toreuse should be further emphasized.
4� Collection of change requests
For the maintenance of the 61082-series annex A Cumulative list of change proposals to IEC61082 Preparation of documents used in electrotechnology, should be amended based ondiscussion about 3B(Kyoto/Secretariat)5 Maintenance report to the Kyoto meeting on IEC 61082:Preparation of documents used in electrotechnology..
4.1� Part 1: General requirements
Editorial updating taking into account Amdt. 1:1995 and Amd. 2:1996, adaptation to other updatedstandards, e.g. IEC 61346, modernising of examples, etc. are natural parts of the revision.
3B(Kyoto/MT 61082)4 - 2 -
4.2� Part 2: Function-oriented diagrams
Only some detailed change requests for Part 2 has been received upp till now.
4.3� Part 3: Connection diagrams
No change requests for Part 3 has been received upp till now.
4.4� Part 4: Location and installation documents
Only some detailed change requests for Part 4 has been received upp till now.
5� Time schedule
Time schedule shall be decided in Kyoto.
6� Resources
In Kyoto shall be decided a call for more experts and resources to the maintenance team IEC61082.
- 3 - 3B(Kyoto/MT 61082)4
ANNEX A
Maintenance report to the Kyoto meeting on IEC 61082: Preparation of documents used in electrotechnology..
This annex A contains cumulative lists of change proposals to the standards in the IEC 61082 series, Preparation of documents used inelectrotechnology
Annex A1: Part 1 - General requirements
Annex A2: Part 2 - Function-oriented diagrams
Annex A3: Part 3 - Connection diagrams
Annex A4: Part 4 - Location and installation documents
The listed change proposals will be considered at the planned revisions.
Additional change proposals should be directed to the Convenor of the maintenance team, Mr Tapio Viitanen, e-mail: [email protected] .
A 1:– Maintenance of IEC 61082- 1 –Cumulative list of errors, change requests, etc
Date Document
1999- IEC 61082-1
NationalCommitt.
Clause/Subcl.
Paragr.Figure/Table
Type of comment(General/
Technical/Editorial)
COMMENTS Proposed change OBSERVATIONS OF THESECRETARIAT
Will be filled later
A 2: – Maintenance of IEC 61082- 2 –Cumulative list of errors, change requests, etc
Date Document
1999- IEC 61082-2
NationalCommitt.
Clause/Subcl.
Paragr.Figure/Table
Type of comment(General/
Technical/Editorial)
COMMENTS Proposed change OBSERVATIONS OF THESECRETARIAT
Will be filled later
- 4 - 3B(Kyoto/MT 61082)4
A 3: – Maintenance of IEC 61082- 3 –Cumulative list of errors, change requests, etc
Date Document
1999- IEC 61082-3
NationalCommitt.
Clause/Subcl.
Paragr.Figure/Table
Type of comment(General/
Technical/Editorial)
COMMENTS Proposed change OBSERVATIONS OF THESECRETARIAT
Will be filled later
A 4: – Maintenance of IEC 61082- 4 –Cumulative list of errors, change requests, etc
Date Document
1999- IEC 61082-4
NationalCommitt.
Clause/Subcl.
Paragr.Figure/Table
Type of comment(General/
Technical/Editorial)
COMMENTS Proposed change OBSERVATIONS OF THESECRETARIAT
Will be filled later
T. Viitanen,Maintainer of IEC 61082
