376 CONTRACT PRICES AVAILABLE FOR VOLUME PURCHASES376 CONTRACT PRICES AVAILABLE FOR VOLUME PURCHASES...

CONTRACT PRICES AVAILABLE FOR VOLUME PURCHASES All Prices Exclude V.A.T. © 2009

POLISHING & LAPPINGGROUP

247

Polishing Mop KitsA complete high performance surface finishing solution, producing a mirror finish in 3 stages. For use with drills, bench grinders or diegrinders. All mops are pleated to run cooler and carry more composition.

Open Type Polishing Mops

SoftDesigned to produce high qualityfinishes on non-ferrous metals suchas brass, copper, aluminium andpewter. Can also be used onplastics for a medium finish. The open type construction is bestused with medium polishingpressure. Can be used with our fastcutting and mirror finish polishingbars.

For Non-Ferrous MetalsContents (1 of each):Secure holding arbor with a 6mm shank.Unstitched hard calico mop 100 x 12.5mmwith 10 folds and a 9.5mm bore. Unstitchedsoft calico mop 100 x 12.5mm with 10 foldsand a 9.5mm bore.60g brown bar - general polishing composition. 60g blue bar - mirror finish polishingcomposition.

For PlasticsContents (1 of each):Secure holding arbor with a 6mm shank.Unstitched hard calico mop 100 x 12.5mmwith 10 folds and a 9.5mm bore. Unstitchedsoft calico mop 100 x 12.5mm with 10 foldsand a 9.5mm bore. 60g brown bar - generalpolishing composition. 100g beige bar -general finishing composition.

For WoodsContents (1 of each):Secure holding arbor with a 6mm shank.Denibbing disc 100 x 25mm with 4 sections and a 9.5mm bore.Unstitched hard calico mop 100 x 12.5mm with 10 folds and a 9.5mm bore. Unstitched soft calico mop 100 x 12.5mm with 10 folds and a 9.5mm bore.100g beige bar - general finishing composition.

Size Order Code List OfferYRK-247 Price/1 Price/1

100 x 25mm -4020K £4.47 £4.02150 x 25mm -4040K £6.79 £6.11150 x 100mm -4060K £12.09 £10.88Arbor To Suit -6020K £12.59 £11.33

MediumThese general purpose polishingmops are superb, for use withsteel, brassware, nickel silver,copper, aluminium, chrome andplastics. Made in 13mm (1/2”)sections, they will splay out whenunder pressure, ideal for work onuneven surfaces. Best used withmedium pressure and our generalpurpose polishing bar, fast cuttingfinishing bar and mirror finishpolishing bar.


100 x 12mm -4220K £5.09 £4.58100 x 25mm -4240K £9.20 £8.28150 x 25mm -4260K £12.45 £11.21Arbor To Suit -6020K £12.59 £11.33

Extra Soft Designed specifically for use onplastics but is also suitable forgold and silver. This very softmaterial is unsuitable for steel,stainless and non-ferrousmetals. Its open typeconstruction performs well witha medium pressure and oursynthetic gloss polishing bars.


100 x 25mm -4120K £5.71 £5.14150 x 25mm -4140K £10.38 £9.34150 x 50mm -4160K £16.84 £15.16Arbor to Suit -6020K £12.59 £11.33

Stitched Type Polishing MopsUntreated SisalThese quality sisal mops aredesigned for heavy duty useincluding mopping operations onsteel and non-ferrous metals. Theyare ideal for the clearing ofgrinding/polishing marks fromprevious operations.


150 x 13mm -4320K £3.56 £3.20150 x 25mm -4340K £6.32 £5.69150 x 50mm -4360K £13.72 £12.35200 x 25mm -4400K £11.70 £10.53200 x 50mm -4420K £20.06 £18.05250 x 50mm -4520K £30.48 £27.43Arbor To Suit -6020K £12.59 £11.33

For Polishing Order Code List OfferYRK-280 Price/1 Price/1

Non-Ferrous -9420K £22.02 £15.41Metals


Plastics -9440K £22.02 £15.41


Woods -9460K £22.02 £15.41


Ferrous Metals -9400K £22.02 £15.41

For Ferrous MetalsContents (1 of each): Secure holding arbor with a 6mm shank. Stitched sisal mop 100 x 25mm with 4 sections and a 9.5mm bore. Unstitched hard calico mop 100 x 12.5mm with 10 folds and a 9.5mm bore. Unstitched soft calico mop 100 x 12.5mm with 10 folds and a 9.5mm bore. 60g dark brown bar - fast cutting composition.60g pink bar - general polishing composition. 60g blue bar - mirror finish polishing composition.A

bra

sives

& P

ow

er

Tools

POLISHING & LAPPINGGROUP

247

Page377CONTRACT PRICES AVAILABLE FOR VOLUME PURCHASES All Prices Exclude V.A.T. © 2009

Pre-Finish &Polishing Bars

General Purpose PolishingHigh quality ingredients combine to producethis bar for rapid working to give a mirrorfinish on non-ferrous metals and plastics.

Product Size Order Code List OfferNumber YRK-247 Price/1 Price/1PGP100 1000g -8000K £5.67 £5.10

Product Size Order Code List OfferNumber YRK-247 Price/1 Price/1FFC080 800g -8020K £5.81 £5.23

Product Size Order Code List OfferNumber YRK-247 Price/1 Price/1FBS080 800g -8040K £5.81 £5.23

Fast Cutting Pre-FinishMedium greasy in composition with ironfree abrasives for fast cutting when usedwith our sisal mops. Its consistency willoften negate the need for scrubbing orabrasion and produce a matt finish without drag lines.

Bright Shine Pre-FinishThis bar has a composition that gives goodcutting characteristics and also leaves abright finish when used with our sisalmops.

Mirror Finish Polishing BarThis bar has a composition that produces a superb mirror finish on stainless steels, chrome plate and non-ferrous metals.

Product Size Order Code List OfferNumber YRK-247 Price/1 Price/1PFC100 1000g -8060K £7.65 £6.88

Product Size Order Code List OfferNumber YRK-247 Price/1 Price/1PSG080 800g -8100K £6.93 £6.24

Fast Cutting Polishing BarThis composition produces a superb fastcutting bar to give a final polish on stainlesssteels, chrome plate and non-ferrous metals.Used generally for commercial finishes because it is clean to use and clears well.

Product Size Order Code List OfferNumber YRK-247 Price/1 Price/1PMF100 1000g -8080K £7.65 £6.88

Synthetic Gloss Polishing BarHigh quality ingredients combine to producethis bar for rapid working to give a mirrorfinish on non-ferrous metals and plastics.

General Finishing Bars1620-280 HyfinAn excellent and economical compositionfor final polishing of stainless steels,chrome plate and non-ferrous metals. Cleanto use, fast cutting and clears well.Generally for commercial finishes.

Product Weight Order Code OfferNumber each CNG-247 Price/1

1605-016 710g -4800A £3.07

Product Description Order Code OfferNumber CNG-247 Price/1

1620-013 Carbrax Medium -5020F £10.461620-165 Steelcut -5022H £7.58

General Polishing Bar1605-016 LustreThe highest quality tripoli composition.Combines finesse of finish with rapidworking in the polishing of all non-ferrousmetals and plastics. Good for mirror finishes.

General Finishing Bars1620-406 SteelbriteA blue composition used for mirror finishingstainless steels, chrome plate and a range of non-ferrous metals.

Satinise Finishing Compositions1615-250 Satene BondA specifically formulated dressing to coatthe mop prior to the application of satene.Assists in the performance and allowsthicker coatings to be built up. Use wheredeburring, deflashing or stock removal isneeded.

Product Grit Weight Order Code OfferNumber each CNG-247 Price/1

1615-250 1.0kg -5014E £7.32

Prefinish Compositions1620-013 Carbrax (Medium greasy)High quality fast cutting compositioncontaining iron free abrasives. To be usedwith Stapol mops. In many instances thiswill eliminate an abrasive or scrubbingoperation. Does not leave drag lines on theworkpiece. Generally for matt finishes.

1620-165 SteelcutAn alternative to Carbrax where brightnessof finish rather than superior cuttingproperties is the major requirement. To beused with stapol mops and buffs.Use withuntreated or simple treated Stapol Mops.

Product Type Weight Order Code OfferNumber each CNG-247 Price/1

1620-406 Steelbrite 800g -5024K £6.09

1635-007 VonaxPrimarily for polyester and nitro-celluloselacquers. Good general purposecomposition for producing a high gloss onmost plastics.

Product Type Weight Order Code OfferNumber each CNG-247 Price/1635-077 Vonax 720g -5030L £5.75

Product Type Weight Order Code OfferNumber each CNG-247 Price/1

1620-280 Hyfin 760g -5023J £5.75

FOR GRINDINGPASTESFor GrindingPastes

SeeGroup

257

Abra

sives &

Pow

er To

ols


MOUNTED POINTSGROUP

250Mounted Points and WheelsSuitable for portable die and straight hand grinders. All points are aluminium oxide with ‘rubenite™’ asstandard for all general purpose grinding and deburring on steels and most metals. Shank diameters

are metric as listed below with imperial sizes available on request. Maximum speedsare quoted assuming thatcollet to back of point does not exceed 12.7mm (1/2”) and are for guidance only.

Shape A1 A2 A3 A4 A5 A6 A8 A11 A12 A13 A14 A15 A21 A22Grade RA46 RA46 RA46 RA46 RA46 RA46 RA46 RA46 RA46 RA60 RA60 RA80 RA60 RA60Diameter 20mm 25mm 25mm 32mm 20mm 19mm 21mm 21mm 18mm 28mm 18mm 6mm 25mm 19mmLength 63mm 32mm 70mm 32mm 28mm 28mm 45mm 50mm 32mm 28mm 22mm 27mm 25mm 16mmMax. rpm 20,000 38,000 16,000 30,000 45,000 39,000 20,000 20,000 48,000 34,000 55,000 55,000 34,000 51,000Weight per 10 420g 380g 630g 440g 240g 240g 370g 470g 210g 390g 190g 100g 380g 200g

List Price/1Offer Price/1

‘A’ ShapeShank Diameter 6mm

‘B’ ShapeShank Diameter 3mm

Shape A23 A24 A25 A26 A31 A32 A33 A34 A35 A36 A37 A38 A39Grade RA60 RA80 RA60 RA60 RA46 RA46 RA46 RA46 RA46 RA80 RA80 RA60 RA60Diameter 19mm 6mm 25mm 16mm 35mm 25mm 25mm 38mm 25mm 40mm 32mm 25mm 19mmLength 25mm 20mm 25mm 16mm 25mm 16mm 13mm 9mm 10mm 10mm 6mm 25mm 19mmMax. rpm 39,000 70,000 35,000 60,000 25,000 38,000 38,000 25,000 38,000 23,000 30,000 35,000 47,000Weight per 10 220g 100g 310g 150g 340g 230g 200g 280g 180g 230g 160g 370g 200g


Shape B41 B42 B43 B44 B45 B46 B47 B51 B52 B53 B54 B55 B61 B62 B63 B64Grade RA80 RA80 RA100 RA100 RA100 RA120 RA120 RA80 RA80 RA100 RA100 RA100 RA80 RA80 RA100 RA120Diameter 16mm 13mm 6mm 6mm 5mm 3mm 3mm 12mm 10mm 8mm 6mm 3mm 19mm 13mm 6mm 6mmLength 16mm 19mm 8mm 10mm 8mm 8mm 4mm 19mm 20mm 16mm 13mm 6mm 8mm 10mm 5mm 2mmMax. rpm 34,000 33,000 80,000 68,000 100,000 100,000 100,000 45,000 45,000 60,000 60,000 100,000 38,000 41,000 92,000 100,000Weight per 10 220g 100g 310g 150g 20g 20g 20g 50g 40g 30g 30g 20g 70g 40g 20g 20g


Shape B65 B70 B71 B73 B81 B82 B83 B84 B91 B92 B93 B94 B95 B96 B97 B101Grade RA120 RA120 RA120 RA120 RA120 RA120 RA120 RA120 RA120 RA120 RA120 RA120 RA120 RA100 RA100 RA100Diameter 3mm 19mm 16mm 13mm 19mm 13mm 10mm 8mm 13mm 6mm 5mm 4.5mm 3mm 3mm 3mm 16mmLength 3mm 3mm 2.4mm 3mm 5mm 6mm 5mm 5mm 16mm 6mm 5mm 2.5mm 5mm 6mm 10mm 18mmMax. rpm 100,000 50,000 60,000 73,000 50,000 76,000 87,000 100,000 34,000 81,000 100,000 100,000 100,000 100,000 100,000 33,000Weight per 10 20g 40g 40g 25g 40g 30g 30g 20g 50g 20g 20g 20g 20g 20g 20g 70g


Shape B102 B103 B104 B105 B106 B111 B112 B113 B114 B115 B121 B122 B123 B124 B131 B132 B135Grade RA180 RA80 RA100 RA120 RA100 RA100 RA120 RA80 RA80 RA100 RA120 RA120 RA80 RA120 RA80 RA80 RA120Diameter 16mm 16mm 8mm 6mm 3mm 12mm 10mm 6mm 6mm 2.5mm 13mm 10mm 5mm 3mm 13mm 10mm 6mmLength 13mm 5mm 10mm 6mm 3mm 18mm 13mm 6mm 10mm 3mm 13mm 10mm 5mm 3mm 13mm 13mm 13mmMax. rpm 44,000 61,000 68,000 100,000 100,000 33,000 45,000 70,000 68,000 100,000 45,000 61,000 100,000 100,000 34,000 45,000 60,000Weight per 10 60g 40g 20g 20g 20g 50g 40g 30g 20g 20g 50g 40g 20g 20g 50g 50g 30g


KEN-250-0010K£3.20£2.88

KEN-250-0020K£2.45£2.21

KEN-250-0030K£3.31£2.98

KEN-250-0040K£2.83£2.55

KEN-250-0050K£2.14£1.93

KEN-250-0060K£2.19£1.97

KEN-250-0080K£2.84£2.56

KEN-250-0110K£2.40£2.16

KEN-250-0120K£2.19£1.97

KEN-250-0130K£2.72£2.45

KEN-250-0140K£1.97£1.77

KEN-250-0150K£2.19£1.97

KEN-250-0210K£2.40£2.16

KEN-250-0220K£1.97£1.77

KEN-250-0410K£1.97£1.77

KEN-250-0420K£1.97£1.77

KEN-250-0430K£1.54£1.39

KEN-250-0440K£1.48£1.33

KEN-250-0450K£1.42£1.28

KEN-250-0460K£1.82£1.64

KEN-250-0470K£1.82£1.64

KEN-250-0510K£1.92£1.73

KEN-250-0520K£1.82£1.64

KEN-250-0530K£1.92£1.73

KEN-250-0540K£1.54£1.39

KEN-250-0550K£1.82£1.64

KEN-250-0610K£1.97£1.77

KEN-250-0620K£1.82£1.64

KEN-250-0630K£1.54£1.39

KEN-250-0640K£1.92£1.73

KEN-250-0230K£2.19£1.97

KEN-250-0240K£1.97£1.77

KEN-250-0250K£2.19£1.97

KEN-250-0260K£2.14£1.93

KEN-250-0310K£2.83£2.55

KEN-250-0320K£2.45£2.21

KEN-250-0330K£2.19£1.97

KEN-250-0340K£2.45£2.21

KEN-250-0350K£2.14£1.93

KEN-250-0360K£2.45£2.21

KEN-250-0370K£2.14£1.93

KEN-250-0380K£2.14£1.93

KEN-250-0390K£2.14£1.93

KEN-250-0650K£1.82£1.64

KEN-250-0700K£1.95£1.75

KEN-250-0710K£1.92£1.73

KEN-250-0730K£2.14£1.93

KEN-250-0810K£2.14£1.93

KEN-250-0820K£2.09£1.88

KEN-250-0830K£2.14£1.93

KEN-250-0840K£2.14£1.93

KEN-250-0910K£1.97£1.77

KEN-250-0920K£1.92£1.73

KEN-250-0930K£1.97£1.77

KEN-250-0940K£1.92£1.73

KEN-250-0950K£1.92£1.73

KEN-250-0960K£1.92£1.73

KEN-250-0970K£1.92£1.73

KEN-250-1010K£2.03£1.83

KEN-250-1020K£1.82£1.64

KEN-250-1030K£1.82£1.64

KEN-250-1040K£1.92£1.73

KEN-250-1050K£1.92£1.73

KEN-250-1060K£2.04£1.84

KEN-250-1110K£1.92£1.73

KEN-250-1120K£1.87£1.68

KEN-250-1130K£1.92£1.73

KEN-250-1140K£1.87£1.68

KEN-250-1150K£2.08£1.87

KEN-250-1210K£1.60£1.44

KEN-250-1220K£1.60£1.44

KEN-250-1230K£1.60£1.44

KEN-250-1240K£1.60£1.44

KEN-250-1310K£1.50£1.35

KEN-250-1320K£1.50£1.35

KEN-250-1350K£1.50£1.35

Abra

sives

& P

ow

er

Tools

MOUNTED POINTSGROUP

250


Shape W142 W143 W144 W145 W146 W147 W149 W151 W152 W153 W154 W158 W159 W160 W162 W163Grade RA120 RA120 RA100 RA80 RA80 RA120 RA120 RA120 RA100 A120 RA80 RA120 RA100 RA80 RA80 RA80Diameter 2.5mm 3mm 3mm 3mm 3mm 4mm 4mm 5mm 5mm 5mm 5mm 6mm 6mm 6mm 6mm 6mmLength 6mm 3mm 6mm 10mm 13mm 0.8mm 6mm 3mm 6mm 10mm 13mm 3mm 5mm 6mm 10mm 13mmMax. rpm 100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 80,000 70,000 90,000 92,000 81,000 68,000 60,000Weight per 10 20g 20g 20g 20g 20g 20g 20g 20g 20g 20g 30g 20g 20g 30g 30g 30g


Shape W187 W188 W192 W193 W194 W195 W196 W197 W200 W201 W202 W203 W204 W205 W208Grade RA60 RA60 RA80 RA60 RA60 RA60 RA60 RA60 RA80 RA60 RA60 RA60 RA60 RA36 RA46Diameter 13mm 13mm 16mm 16mm 16mm 16mm 16mm 16mm 20mm 20mm 20mm 20mm 19mm 20mm 20mmLength 25mm 38mm 6mm 10mm 13mm 19mm 25mm 50mm 3mm 6mm 10mm 13mm 19mm 25mm 50mmMax. rpm 40,500 30,370 61,000 61,000 56,000 46,000 32,000 21,000 50,000 40,000 30,000 25,000 42,000 34,000 18,000Weight per 10 170g 220g 140g 140g 150g 190g 220g 350g 400g 140g 160g 180g 230g 280g 500g


Shape W211* W212 W215 W216 W217 W218 W219 W220 W222 W225 W226 W227 W230 W236 W238 W242 W244*Grade RA80 RA60 RA80 RA46 RA46 RA80 RA46 RA46 RA46 RA46 RA46 RA46 RA46 RA46 RA46 RA46 RA46Diameter 22mm 22mm 25mm 25mm 25mm 25mm 25mm 25mm 25mm 32mm 32mm 32mm 32mm 38mm 38mm 50mm 50mmLength 3mm 6mm 3mm 6mm 10mm 13mm 19mm 25mm 50mm 6mm 9.5mm 13mm 32mm 13mm 38mm 25mm 50mmMax. rpm 43,000 33,000 38,000 38,000 38,000 38,000 35,000 25,000 15,900 30,000 30,000 30,000 20,000 25,000 15,000 11,000 11,000Weight per 10 60g 150g 30g 30g 40g 30g 40g 100g 730g 210g 270g 230g 700g 430g 1100g 1380g 2670g


‘W’ ShapeShank Dia.3mm

‘W’ ShapeShank Diameter6mm

Assorted Mounted Point SetsSelected shapes suitable for a vast range of internal grinding operations. For use with air and electric die grinders, drills etc. 3mm and 6mm shank sizes.‘Rubenite’ aluminium oxide grade for general use on metals.

Contents:5 Piece: A5, A24, A26, W217 and W205. Supplied in clear bag with header.

8 Piece: A5, A24, A25, A26, A39, W177, W186 and W205. Supplied in clear bag with header.

24 Piece: A5, A15, A24, A26, A32, A37, A38, B44, B52, B53, B81, B91, B97,B122, B123, B135, W144, W153, W163, W176, W177, W186, W205 and W220. Supplied in fitted wooden bench case.

No. of Contents Weight Order Code List OfferPieces each KEN-250 Price/1 Price/1

5 As 0.10kg -2950K £8.99 £7.558 Above 0.17kg -2980K £14.25 £11.97

24 1.20kg -3240K £39.95 £33.56

Shape W164 W167 W170 W171* W173 W174 W175 W176 W177* W178* W179* W182 W183 W184 W185 W186*Grade RA80 RA60 RA60 RA60 RA80 RA60 RA60 RA60 RA60 RA60 RA60 RA60 RA80 RA80 RA60 RA60Diameter 6mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm 10mm 10mm 10mm 13mm 13mm 13mm 13mm 13mmLength 13mm 6mm 13mm 19mm 3mm 6mm 10mm 13mm 20mm 25mm 32mm 3mm 6mm 10mm 13mm 20mmMax. rpm 55,000 60,000 40,000 36,000 70,000 60,000 50,000 45,000 33,000 26,000 25,000 70,000 70,000 70,000 34,500 51,000Weight per 10 40g 30g 40g 100g 30g 30g 40g 50g 120g 120g 140g 40g 40g 50g 60g 140g


‘W’ ShapeShank Dia. 3mm except* = 6mm

‘W’ ShapeShank Diameter6mm exceptW244= 10mm& W211= 3mm

A5 A15 A24 A26 A32 A37 A38 W177 W186 W205 W220 B44 B52 B53 B81 B91 B97 B122 B123 B135 W144 W153 W163 W176

KEN-250-1420K£1.55£1.40

KEN-250-1430K£1.55 £1.40

KEN-250-1440K£1.50 £1.35

KEN-250-1450K£1.50 £1.35

KEN-250-1460K£1.50 £1.35

KEN-250-1470K£1.50 £1.35

KEN-250-1490K£1.50 £1.35

KEN-250-1510K£1.50 £1.35

KEN-250-1520K£1.50 £1.35

KEN-250-1530K£1.50 £1.35

KEN-250-1540K£1.50 £1.35

KEN-250-1580K£1.50 £1.35

KEN-250-1590K£1.50 £1.35

KEN-250-1600K£1.50 £1.35

KEN-250-1620K£1.50 £1.35

KEN-250-1630K£1.50 £1.35

KEN-250-1640K£1.50 £1.35

KEN-250-1670K£1.50 £1.35

KEN-250-1700K£1.50 £1.35

KEN-250-1710K£1.50 £1.35

KEN-250-1730K£1.50 £1.35

KEN-250-1740K£1.50 £1.35

KEN-250-1750K£1.50 £1.35

KEN-250-1760K£1.50 £1.35

KEN-250-1770K£1.54 £1.39

KEN-250-1780K£1.92 £1.73

KEN-250-1790K£1.92 £1.73

KEN-250-1820K£1.50 £1.35

KEN-250-1830K£1.50 £1.35

KEN-250-1840K£1.50 £1.35

KEN-250-1850K£1.60 £1.44

KEN-250-1860K£1.60 £1.44

KEN-250-1870K£1.83 £1.65

KEN-250-1880K£2.19 £1.97

KEN-250-1920K£1.50 £1.35

KEN-250-1930K£1.66 £1.49

KEN-250-1940K£1.66 £1.49

KEN-250-1950K£1.72 £1.55

KEN-250-1960K£1.60 £1.44

KEN-250-1970K£2.72 £2.45

KEN-250-2000K£1.60 £1.44

KEN-250-2010K£1.82 £1.64

KEN-250-2020K£1.82 £1.64

KEN-250-2030K£1.92 £1.73

KEN-250-2040K£1.97 £1.77

KEN-250-2050K£2.14 £1.93

KEN-250-2080K£2.14 £1.93

KEN-250-2110K£1.82 £1.64

KEN-250-2120K£1.92 £1.73

KEN-250-2150K£1.60 £1.44

KEN-250-2160K£1.60 £1.44

KEN-250-2170K£1.60 £1.44

KEN-250-2180K£1.82 £1.64

KEN-250-2190K£1.87 £1.68

KEN-250-2200K£1.87 £1.68

KEN-250-2220K£2.45 £2.21

KEN-250-2250K£1.97 £1.77

KEN-250-2260K£1.97 £1.77

KEN-250-2270K£1.97 £1.77

KEN-250-2300K£2.40 £2.16

KEN-250-2360K£2.77 £2.49

KEN-250-2380K£2.49 £2.24

KEN-250-2420K£4.48 £4.03

KEN-250-2440K£3.72 £3.35

MountedPoints

Abra

sives &

Pow

er To

ols


OILSTONESGROUP

255AbrasivesFiles

A range of tough general purpose sharpening stonesable to give keen, even cutting edges on all straightedge cutting tools. Consistent and uniform cutting edges ensurefast cutting and longer tool life.Square Aluminium Oxide

Size Grade Weight Order Code List Offer(mm) each KEN-255 Price/1 Price/1

150 x 50 x 25 Med/Coarse 430g -1010K £22.47 £16.85200 x 50 x 25 Med/Coarse 530g -1030K £25.33 £19.00100 x 25 x 13 Med/Coarse 70g -1050K £10.57 £7.93


100 x 25 x 6 Fine 36g -4000K £9.15 £6.86Medium -4010K £9.15 £6.86




Fine 530g -1200K £24.42 £18.32200 x 50 x 25 Medium 570g -1210K £24.42 £18.32

Coarse 685g -1220K £24.42 £18.32Fine 57g -1300K £10.19 £7.64

100 x 25 x 13 Medium 57g -1310K £10.19 £7.64Coarse 57g -1320K £10.19 £7.64

Bench Stones For workshop use. Ideal for sharpening chisels, plain iron andvirtually any metallic implements. Available in two types.Combination Aluminium Oxide

OilstonesA comprehensive range of bench stones and sharpening stonesto cover a wide variety of sharpening and honing applications.Most of the shapes and sizes are available in fine, medium andcoarse grades. Available in aluminium oxide or silicon carbide, allstones can be used wet or dry to produce sharp cutting edges orto remove burrs.Aluminium Oxide Man-made abrasive which is extremely toughenabling high speed penetration of high tensile materials withoutcausing excessive fracturing. This resistance to fracturing makesit a versatile material suitable for general sharpening and honingapplications.Silicon Carbide Man-made abrasive with very hard, sharpparticles. This makes it ideal for non-ferrous metals, hardsurfaces, alloys and cemented carbides. Also used on stone,marble, glass and plastics. A superior abrasive that is able topenetrate and cut quickly with only light pressure being applied.

Single Grit Aluminium Oxide

Pocket StoneSingle Grit Aluminium OxideMan-made abrasive which is extremely tough, enabling high speedpenetration of high tensile materials without causing excessivefracturing. This resistance to fracturing makes it a versatilematerial suitable for general sharpening and honing applications.Ideal for sportsmen, farmers, gardeners and the home user tobring back that sharp edge on pocket-knives, chisels etc.


Fine -4300K £7.22 £5.42100 x 6 Medium 10g -4310K £7.22 £5.42

Coarse -4320K £7.22 £5.42Fine -4400K £8.22 £6.17

100 x 10 Medium 30g -4410K £8.22 £6.17Coarse -4420K £8.22 £6.17

Fine -4500K £8.84 £6.63100 x 13 Medium 45g -4510K £8.84 £6.63

Coarse -4520K £8.84 £6.63Fine -4600K £11.50 £8.62


Fine -4700K £11.74 £8.80150 x 19 Medium 110g -4710K £11.46 £8.60

Coarse -4720K £11.74 £8.80Fine -4800K £13.54 £10.15


3 Square Aluminium Oxide

Silicon Carbide

Single Grit Silicon Carbide


Fine -1500K £6.30 £4.72100 x 6 Medium 15g -1510K £6.30 £4.72

Coarse -1520K £6.30 £4.72Fine -1600K £7.37 £5.53

100 x 10 Medium -1610K £7.37 £5.53Coarse

35g-1620K £7.37 £5.53

Fine -1700K £7.53 £5.65100 x 13 Medium 55g -1710K £7.53 £5.65

Coarse -1720K £7.53 £5.65


Fine -4900K £8.02 £6.01100 x 6 Medium 10g -4910K £8.02 £6.01

Coarse -4920K £8.02 £6.01Fine -5000K £9.13 £6.85


Fine -5100K £8.92 £6.69100 x 13 Medium 25g -5110K £8.92 £6.69

Coarse -5120K £8.92 £6.69150 x 13 Medium 40g -5210K £11.66 £8.74150 x 19 Medium 60g -5310K £12.49 £9.37


Fine -1800K £7.20 £5.40100 x 6 Medium 10g -1810K £7.20 £5.40

Coarse -1820K £7.20 £5.40Fine -1900K £7.96 £5.97


Fine -2000K £7.85 £5.89100 x 13 Medium 30g -2010K £7.85 £5.89

Coarse -2020K £7.85 £5.89

Silicon Carbide


80 x 22 x 10 Medium 45g -1410K £4.89 £3.67

Abra

sives

& P

ow

er

Tools

OILSTONESGROUP

255



Fine -2100K £9.62 £7.21100 x 6 Medium 10g -2110K £9.62 £7.21

Coarse -2120K £9.62 £7.21Fine -2200K £9.90 £7.42


Fine -2300K £10.24 £7.68100 x 13 Medium 30g -2310K £10.24 £7.68

Coarse -2320K £10.24 £7.68

Slip Stones For sharpening curved edge cutting tools.Aluminium Oxide


115 x 45 x 6-1.5 Fine 40g -5800K £13.04 £9.78Med -5810K £13.04 £9.78

115 x 45 x 13-5 Med 95g -5910K £13.04 £9.78


100 x 25 x 11/5 Fine 45g -3000K £8.32 £6.24100 x 25 x 11/5 Med 50g -3010K £8.32 £6.24115 x 45 x 6/1.5 Med 55g -3110K £10.87 £8.15115 x 45 x 13/5 Fine 120g -3200K £11.29 £8.47115 x 45 x 13/5 Med 120g -3210K £11.29 £8.47Abrasive Files

Round Aluminium Oxide


Fine -5400K £11.14 £8.36100 x 6 Medium 10g -5410K £11.14 £8.36

Coarse -5420K £11.14 £8.36Fine -5500K £11.19 £8.39


Fine -5600K £11.36 £8.52100 x 13 Medium 25g -5610K £11.36 £8.52

Coarse -5620K £11.36 £8.52

Sharpening Stone SetA six piece set supplied in a wooden case specially selected to cover the majority of sharpening applications. All stones are 13mm x 100mm medium grit supplied in both aluminium oxide and silicon carbide. Contents: 2 square, 2 three square and 2 round.

Silversmith StoneAluminium Oxide


100 x 13 x 2 Fine 15g -2500K £12.34 £9.26100 x 13 x 2 Med 15g -2510K £12.34 £9.26

Knife Stone Aluminium Oxide


100 x 25 x 3 Medium 20g -2710K £11.28 £8.46

Reamer Stone Aluminium Oxide


125 x 25 x 5 Medium 45g -3410K £8.87 £6.65

Half Round Aluminium Oxide

Round Silicon Carbide


Fine -2400K £8.40 £6.30100 x 13 Medium 25g -2410K £8.40 £6.30

Coarse -2420K £8.40 £6.30

ScytheStones

Aluminium OxideA general purpose sharpening stone for agricultural and horticultural tools such as hoes, spades, edgers, clippers and shears.Size: 235mm flat tapered and 305mm English round.


235 x 35/15 Coarse 250g -3620K £7.17 £5.38305 x 36/20 Coarse 610g -3720K £9.53 £7.15

Silicon Carbide

Flattapered

Englishround

Number of Weight Order Code List OfferPieces each KEN-255 Price/1 Price/1

6 250g -9000K £40.95 £27.85

Abra

sives &

Pow

er To

ols6

PIECES


OILSTONESGROUP

255

Size Grit Weight Order Code Offer(mm) each ENG-255 Price/1

220 108g -1000A £1.826 x 3 400 108g -1002C £2.05

600 108g -1003D £2.40220 191g -1010E £1.93

6 x 6 320 191g -1011F £2.16400 191g -1012G £2.16600 191g -1013H £2.57100 194g -1024V £2.38

13 x 3 220 194g -1020J £1.99400 194g -1022L £2.33600 194g -1023M £2.81220 343g -1030N £2.38

13 x 6 320 343g -1031P £2.81400 343g -1032Q £2.81600 343g -1033R £3.45

25 x 13 100 -1064V £4.80180 -1067Y £4.80

Hyprez MS Hard/Silicon CarbideThis is a tough fast cutting stone. Length: 150mm.

Hyprez RG Medium Silicon CarbideThis stone is a mainstay, designed for general use. Length: 150mm.

Pencil Type Length: 150mm.



150 95g -2001B £1.93

4 x 4 220 95g -2000A £1.69400 96g -2002C £1.93600 98g -2003D £2.28


120 108g -1100A £1.56

6 x 3 180 108g -1101B £1.56220 108g -1102C £1.56320 108g -1103D £1.85120 191g -1110E £1.79

6 x 6 180 191g -1111F £1.79220 191g -1112G £1.79120 184g -1130N £1.86

13 x 3 150 184g -1131P £1.86220 184g -1132Q £1.86320 184g -1133R £2.08120 343g -1140S £2.43

13 x 6 180 343g -1141T £2.43220 343g -1142V £2.43320 343g -1143W £2.77


6 x 6 x 6220 191g -1122L £2.90320 191g -1123M £3.38


120 102g -2010E £1.504 x 4 220 104g -2011F £1.50

320 99g -2012G £1.73


6 x 3150 108g -1200A £1.68220 108g -1201B £1.68320 108g -1202C £1.68150 191g -1210D £1.57

6 x 6 180 -1211E £1.57320 191g -1212F £1.86150 343g -1220G £2.43

13 x 6 220 343g -1221H £2.43320 343g -1222J £2.72


6 x 6 320 191g -1302C £2.08400 191g -1303D £2.08220 184g -1311F £1.85

13 x 3 320 184g -1312G £2.04400 184g -1313H £2.02

13 x 6 150 343g -1320J £2.38320 343g -1322L £2.72

Size Grit Weight Order Code Offer(mm) each ENG-255 Price/16 x 6 220 191g -1400A £1.76


220 109g -2020H £1.95

4 x 4 320 103g -2021J £2.01400 98g -2022K £2.01600 96g -2023L £2.54

Hyprez HY Semi-Hard Aluminium OxideOil filled, this stone is designed to minimise loading. Length: 150mm.

Hyprez RB Aluminium Oxide (Sharp) This stone excels at fast cutting on hard steel. Length: 150mm.


Triangle Type Length: 150mm.

Hyprez EDM Hard/Aluminium Oxide Specially formulated for EDM scale removal. Rectangle Type Length: 150mm.

Hyprez RM Very Hard Aluminium OxideThis stone excels at fast-cutting on hard steel and exotics. Length:150mm.


220 108g -1500A £1.56

6 x 3 320 108g -1501B £1.92400 108g -1502C £1.92600 108g -1503D £2.26220 191g -1510E £1.68

6 x 6 400 191g -1512G £2.08600 191g -1513H £2.50220 194g -1520J £1.85

13 x 3 320 194g -1521K £2.08400 194g -1522L £2.08600 194g -1523M £2.55220 343g -1530N £2.38

13 x 6 320 343g -1531P £2.72400 343g -1532Q £2.72600 343g -1533R £3.18


6 x 3220 108g -1601B £2.32320 108g -1602C £2.46220 191g -1611F £2.35

6 x 6 320 191g -1612G £2.92400 191g -1613H £2.92

13 x 1.5 220 -1621K £2.54320 115g -1622L £2.85

13 x 3 220 184g -1631P £2.72320 184g -1632Q £3.89400 -1633R £3.89220 343g -1641T £3.37

13 x 6 320 343g -1642V £4.02400 343g -1643W £4.02

Hyprez®

OilstonesManufactured from carefully graded abrasive particles, mixed withthe appropriate bonding agents and fired in electric or gas ovensto produce a stone suitable for roughing out cavities and dies tocommercial finishes.Hyprez DS Medium/Soft Aluminium OxideThis is a popular, fast-cutting stone which does not load easily.Good for all dies and moulds. Length: 150mm.

Abra

sives

& P

ow

er

Tools

OILSTONESGROUP

255


Gesswein AbrasiveStones

Manufactured from carefully graded abrasive particles, mixed withthe appropriate bonding agents and fired in electric or gas ovens toproduce a stone suitable for roughing out cavities and dies tocommercial finishes.Gesswein DF Medium/Soft Aluminium OxideThis is a popular fast-cutting stone which does not load easily. Good for all dies and moulds. Length: 150mm.

Gesswein EDM Hard/Aluminium OxideSpecially formulated for EDM scale removal. Length: 150mm.

Gesswein MFP Hard Silicon CarbideThis is a tough fast cutting stone. Length: 150mm.

Gesswein MF Medium Silicon CarbideThis stone is a mainstay, designed for general use. Length: 150mm.

Gesswein RA Very Hard Aluminium OxideThis stone excels at fast cutting. Length: 150mm.

Gesswein OT Semi-hard Aluminium OxideOil filled, this stone is designed to minimise loading. Length: 150mm.



Product Size Grit Weight Order Code OfferNumber each KEM-255 Price/12311253 220 108g -1209A £23.60311238 6 x 3 320 108g -1231B £25.20311242 400 108g -1237A £25.20311251 600 108g -1261P £28.40311201 220 191g -1210B £23.60311205 6 x 6 320 191g -1232C £25.20311210 400 191g -1238B £25.20311214 600 191g -1262Q £29.40311202 220 194g -1215N £26.70311206 13 x 3 320 194g -1233D £28.20311211 400 194g -1239C £28.20311215 600 194g -1263R £32.50311203 220 194g -1216P £30.80311207 13 x 6 320 194g -1234E £34.10311212 400 194g -1240D £34.10311216 600 194g -1264S £43.00

Product Size Grit Weight Order Code OfferNumber each KEM-255 Price/12311702 120 108g -1501E £23.60311707 6 x 3 180 108g -1509A £22.50311725 220 108g -1523P £22.50311714 320 108g -1539C £24.20311703 120 191g -1501L £23.60311708 6 x 6 180 191g -1510B £23.60311726 220 191g -1524Q £23.60311715 320 191g -1540D £25.20311706 10 x 10 120 -1503N £32.10711789 10 x 10 220 -1530X £32.10311704 120 184g -1502A £25.40311709 13 x 3 180 184g -1515N £25.40311727 220 184g -1525R £25.40311763 320 194g -1545E £27.00311705 120 343g -1502M £30.70311710 13 x 6 180 343g -1520C £30.70311728 220 343g -1526S £30.70311718 320 343g -1550F £34.10

Product Size Grit Weight Order Code OfferNumber each KEM-255 Price/12311147 220 108g -2271B £21.70311158 6 x 3 320 108g -2281H £25.60311129 400 108g -2296P £25.60311141 600 108g -2321B £31.70311121 220 191g -2272C £21.70311124 6 x 6 320 191g -2282J £25.60311150 400 191g -2297Q £25.60311152 600 191g -2322C £31.70311161 220 194g -2273D £24.20311148 13 x 3 320 194g -2283K £28.60311155 400 194g -2298R £28.60311157 600 194g -2323D £36.10311123 220 194g -2274E £28.80311126 13 x 6 320 194g -2284L £34.30311140 400 194g -2299S £34.30311144 600 194g -2324E £44.80

Product Size Grit Weight Order Code OfferNumber each KEM-255 Price/12311605 120 108g -4121P £25.20311613 6 x 3 220 108g -4201B £25.20311617 320 108g -4301J £26.60311629 400 108g -4401Q £6.60311606 120 191g -4122Q £25.20311614 6 x 6 220 191g -4202C £25.20311618 320 191g -4302K £30.40311630 400 191g -4402R £30.40311625 120 107g -4120N £28.20311635 13 x 1.5 220 136g -4200A £28.20311627 320 115g -4300H £34.20311628 400 117g -4400P £34.20311607 120 184g -4123R £28.20311615 13 x 3 220 184g -4203D £28.20311619 320 184g -4303L £34.20311631 400 184g -4403S £34.20311616 220 343g -4204E £32.50311620 13 x 6 320 343g -4304M £39.20311632 400 343g -4404T £39.20

Product Size Grit Weight Order Code OfferNumber each KEM-255 Price/12311405 220 95g -4042C £19.90311406 4 x 4 320 95g -4043D £19.90311417 400 95g -4044E £19.90311407 600 95g -4046G £22.60

Product Size Grit Weight Order Code OfferNumber each KEM-255 Price/12311184 6 x 3 150 108g -2600A £23.00311119 150 191g -2601B £23.80311164 6 x 6 220 191g -2610K £23.80311125 320 191g -2620R £28.00311156 400 191g -2630X £28.00311146 150 184g -2602C £26.40311122 13 x 3 220 184g -2611L £26.40311160 320 184g -2621S £31.10311172 400 184g -2631Y £31.10311137 150 343g -2603D £31.90311165 13 x 6 220 343g -2612M £31.90311127 320 343g -2622T £38.20311131 400 343g -2632Z £38.20

Product Size Grit Weight Order Code OfferNumber each KEM-255 Price/12311801 120 108g -3701B £24.40311805 6 x 3 220 108g -3711H £24.40311809 320 108g -3721P £25.30311802 120 191g -3702C £25.00311806 6 x 6 220 191g -3712J £25.00311810 320 191g -3722Q £26.30311804 120 343g -3704E £32.90311808 13 x 6 220 343g -3714L £32.90311812 320 343g -3724S £38.20

Product Size Grit Weight Order Code OfferNumber each KEM-255 Price/12311701 120 102g -1500G £15.80311796 4 x 4 220 104g -1500X £15.80311713 320 99g -1500L £15.80

Product Size Grit Weight Order Code OfferNumber each KEM-255 Price/12311074 13 x 3 220 95g -3921D £26.60

Kemet

Gesswein PW Aluminium Oxide (Sharp)This stone excels at fast cutting on hard steel. Length: 150mm.

Abra

sives &

Pow

er To

ols


DIAMOND WHETSTONESGROUP

256

Product Mesh Order Code List OfferNumber DMT-256 Price/1 Price/1W250FC 600/325 -6086G £138.00 £131.10

Machinists WhetstonesOverall dimensions: 100 x 25mm. With leather sheath.

Product Mesh Weight Order Code List OfferNumber each DMT-256 Price/1 Price/1

WMF 600 90g -6110Q £25.40 £24.13WMC 325 90g -6100P £25.40 £24.13

Diafold Conical File 102mm long. 3.2 to 9.5mm tapered forhoning curved surfaces, serrated knivesetc.

Product Mesh Order Code List OfferNumber DMT-256 Price/1 Price/1F70X 220 -3416G £11.70 £11.12F70C 325 -3410A £11.70 £11.12F70F 600 -3414E £11.70 £11.12F70E 1200 -3412C £11.70 £11.12

Size Grade Order Code List Offer(mm) DMT-256 Price/1 Price/1

Coarse -2930C £11.40£10.8385 x 51 x 1 Extra Fine -2940E £11.40£10.83

Fine -2950F £11.40£10.83

Mini-Sharp & Key Ring


W7C 325 -6036A £8.50 £8.07W7F 600 -6042H £8.50 £8.07W7E 1200 -6038C £8.50 £8.07

MiniWhetstones

250mm Double Sided Whetstones

150mm Bench WhetstonesOverall dimensions: 152 x 50 x 30mm. With durable non-slip case.

DiamondWhetstones

Made with real diamond (monocrystaline).Easy to use – requires only light pressure toproduce a keen edge. Uses water as alubricant. Can be used to hone and sharpensteel, ceramics, glass, tungsten carbide,stone, etc.100mm Double Diafold Whetstones

Product Mesh Weight Order Code List OfferNumber each DMT-256 Price/1 Price/1FWCX 325 220g -3810A £39.00 £37.05FWEF 120 600g -3820C £39.00 £37.05FWFC 600 325g -3824G £39.00 £37.05

Product Mesh Weight Order Code List OfferNumber each DMT-256 Price/1 Price/1W6CP 325 300g -6010C £43.80 £41.61W6FP 600 300g -6020D £43.80 £41.61

ProfessionalWhetstones

6223JProfessional quality diamond whetstone.Used for sharpening all types of edge tools such as chisels and plane blades. Use with a small amount of water as a lubricant.

W7EFC Set Mini WhetstonesAll 70 x 25 x 5mm.


1x12003 1x600 115g -6040F £23.70 £22.52

1x325

Product Mesh Weight Order Code List OfferNumber each DMT-256 Price/1 Price/1DCSFH 600 110g -3010A £27.00 £25.65

Size Grade Order Code OfferWidth (mm) MMM-256 Price/1150 x 50 Red N74(P180) -2660E £46.72

Credit Card Diamond WhetstonesDIA-SHARP® diamond surface sharpeningstones provide cutting edge performanceand are recognized for their superior qualityparticular to all DMT® products. Featuresan uninterrupteddiamond sharpeningsurface that allowsusers to quickly put arazor edge on smallcontact area andpointed tools.Size: 83 x 51 x 1mm.

Drill Bit Sharpener

Accurately grinds correct tip angles andrestores cutting edges to sharp-as-new. Thegrinding jig has all the different angles forcorrect tip geometry built in. It accuratelypositions the bit over the wheels andprecision grinds the correct tip and reliefangles. Unique cam action ensures correcttip rake and chisel edge. Tough siliconcarbide wheel sharpens, re-edges and alsore-points a wide range of small tools includingscrewdrivers, bradawls, punches, coldchisels,tile cutters and carbide- tipped tools. Sharpens all major drill bit types, 3 - 13mm.

Chainsaw Sharpening KitsRegrinds chainsaw cutters to thecorrect angle - sharp as new.Resharpens chain without removing it from the saw. Includes depth gauge and file to maintain the correct cutter guide height. Available in two sizes:4.0mm (-6170E) 4.8mm (-6170C)

2-in-1 Knife &Scissor SharpenerSharpens knives, cleavers,mezzalunas and pen knives as well as left or right handscissors. Tugsten carbidesharpening heads that quickly restore a really sharp edge right to the tip.

Chisel & Plane Blade SharpenerSharpens chisels and planeblades 10 - 60mm wide.Unique water cooled systempreserves steel temper.Leather strop for razor sharpedge. This compact systemuses a controlled flow ofwater to eliminate overheating of the blade edgeand loss of temper.

Description Order Code List OfferMTS-256 Price/1 Price/1

Sharpening -6170C £10.99 £9.34Kits -6170E £10.99 £9.34


Sharpener -2001A £14.99 £12.74Al/Ox Wheel -2002B £2.50 £2.12Sil/Ca Wheel -2003C £2.80 £2.38


Chisel & Plane -6301E £22.99 £19.54


2 in 1 -6190F £6.99 £5.94

Abra

sives

& P

ow

er

Tools

GRINDING PASTES & COMPONDSGROUP

257


Kemet Diamond Compounds

Kemet Diamond Compounds are formulated and manufactured tothe highest standards. The KD formula ensures a stable carrier isprovided, which gives the fastest cutting and polishing action. TypeW (water) and OS (oil) lubricants can be used to extend the life ofthe compound. Kemet Diamond Compound is suitable for lappingand polishing most materials including steels, carbides and ceramics.

Final Polishing

Lapping & Pre-Polishing

Rapid Stock Removal

Lubricant for use with Kemet Diamond Compound Base

Size Type Weight Order Code List Offereach YRK-257 Price/1 Price/1

85g* Fine/Coarse -2100K £5.70 £5.24

200g Fine -2010K £7.57 £6.96Coarse -2050K £7.57 £6.96

500g Fine -2020K £9.93 £9.14Coarse -2060K £9.93 £9.14

Product Grain Concentration Colour Weight Order Code OfferNumber Size KEM-257 Price/1111002 1/10 KD-C2 Grey 5g -0810B £6.34111004 1/4

KD-C2 Grey 5g -0910B £8.36111003 KD-C1 -0900A £6.34111007 1 KD-C3 Blue -1000A £12.70111006 KD-C2 5g -1010B £9.80111011 KD-C4 -1110K £19.20111010 KD-C3 -1100J £13.10111009 3 KD-C2

Green 5g-1050E £10.10

Product Grain Concentration Colour Weight Order Code OfferNumber Size KEM-257 Price/1111014 KD-C3 -1220V £23.70111013 6 KD-C2 Yellow 5g -1210T £15.50111012 KD-C1 -1200S £12.70111018 KD-C4 -1297D £21.80111017 KD-C3 -1295C £23.70111016 8 KD-C2 Red 5g -1294B £14.34111015 KD-C1 -1293A £11.62112008 L-C2 -1300K £17.19111020 14 KD-C2 Brown 5g -1390L £27.30111019 KD-C1 -1400M £18.60

Product Grain Concentration Colour Weight Order Code OfferNumber Size KEM-257 Price/1111023 25 KD-C2 Mahogany 5g -1505L £22.50111022 KD-C1 -1500K £19.20111026 45 KD-C2 Purple 5g -1532C £26.50111029 KD-C2 -1552K £26.98111028 60 KD-C1 Orange 5g -1550H £21.80111031 KD-C2 -1572R £26.98111030 90 KD-C1 White 5g -1570P £21.80

1 Product Description Type Colour Weight Order Code OfferNumber each KEM-257 Price/1301203 Trigger 450ml Oil Blue 0.4kg -8701A £9.90301103 2.5 Litre Oil Blue 2.1kg -8702B £13.80

York Silicon Carbide Valve Grinding Compound

For cutting brass, hardened steel and cast iron. Ideally used within theautomotive and engineering industry. For heavy and light stock removalapplications, from the removal of pits in exhaust pipes to the finishing ofinlet valves.

Kemet

Product Type Shape Size Weight Order Code OfferNumber (mm) KEM-257 Price/1321202 Rectangle 6 x 4 -3120L £8.60321205

Hard12 x 6 200g -3150K £17.50

321201Wood

4 x 4 25g -3110K £0.78321203 Square 6 x 6 90g -3130M £10.20321207 Cylinder 3 Dia. 20g -3170M £8.60

*Contains 1x fine 85g and 1x coarse 85g

Lapping SticksLength: 150mm.

Final Polishing

Abra

sives &

Pow

er To

ols


GRINDING PASTES & COMPOUNDSGROUP

257Hyprez Five Star Diamond Compounds

Hyprez® Fivestar® combined formula compound provides theunsurpassed cutting capability of natural diamond with the impactresistance of manufactured diamond. Formulated to withstandsevere lapping conditions, the use of a stable carrier ensuressustained particle suspension throughout the process and an evensurface coverage improving impregnation of laps. Suitable for usewith Hyprez® type OS (Oil Soluble) or Type W (Water Soluble) lubricants to meet specific requirements ofmaterial and surface finish. The Hyplicator® dispensing syringeallows a precisely measured amount of compound to be applied,preventing contamination and wastage.

Lapping SticksLength: 150mm.

BrushesShank dia.: 2.4mm.

Lapping & Pre-Polishing

Rapid Stock Removal

Final Polishing

Lubricant for use with Hyprez Five Star Diamond Compound

Grain Size Concentration Colour Weight Order Code Offer(Micron) each ENG-257 Price/1

1/10 FS-475 Grey 5g -1000A £10.971/4

FS-475 Grey 5g -1020C £10.97FS-480 -1030D £8.33

1 FS-45 Blue 5g -1040E £10.49FS-47 -1050F £7.78FS-40 -1070H £15.25

3 FS-45 Green 5g -1080J £10.49FS-47 -1090K £7.78FS-48 -1100L £6.41

Type Shape Size Weight Order Code Offer(mm) each ENG-257 Price/106 x 3 40g -1400N £6.46

Rectangle 12 x 6 195g -1420Q £9.28

Hard Wood 19 x 8 310g -1460V £18.05Square 6 x 6 90g -1500Z £8.35

Cylinder 3 Dia 20g -1520B £10.706 Dia 65g -1540D £16.786 x 3 40g -1410P £3.56

Rectangle 12 x 6 195g -1430R £3.7119 x 8 310g -1470W £5.02

Soft Wood Square 3 x 3 20g -1490Y £3.456 x 6 90g -1510A £3.73

Cylinder 3 Dia 20g -1530C £3.636 Dia 65g -1550E £5.00


FS-375 -1110M £18.826 FS-42 Yellow 5g -1120N £12.71

FS-45 -1130P £10.18FS-30 -1140Q £28.60

8 FS-35 Red 5g -1150R £21.79FS-375 -1160S £18.82FS-40 -1170T £15.25FS-30 -1180V £28.60

14 FS-35 Brown 5g -1190W £21.79FS-40 -1200X £15.25

Description Type Base Weight Order Code Offereach ENG-257 Price/1

Trigger Spray OS Oil 450ml -1308H £5.982.5ltr Can OS Oil 2.1kg -1320K £7.88


FS-30 -1210Y £28.6025 FS-35 Mahogany 5g -1220Z £21.79

FS-40 -1230A £15.25

45 FS-35 Purple 5g -1250C £21.79FS-40 -1260D £15.25

90 FS-30 White 5g -1300H £28.60

Type Shape Size Weight Order Code Offer(mm) each ENG-257 Price/10

15 30g -1800T £4.18Wheel 19 30g -1820W £4.18

25 30g -1840Y £4.18StandardCup 6 25g -1900A £4.18

10 30g -1920C £4.18Straight 4.5 25g -2000G £3.58

Wheel 15 30g -1810V £4.18Heavy Duty 19 30g -1830X £4.18

Straight 4.5 25g -2010H £3.58

Abra

sives

& P

ow

er

Tools

AIR HOSE & BALANCERSGROUP

258


Bore Weight Order Code List OfferSize (mm) each KEN-258 Price/1 Price/16.35 (1/4”) 3.6kg -1010K £35.08 £25.269.50 (3/8”) 4.5kg -1030K £44.07 £31.73

12.70 (1/2”) 5.9kg -1050K £50.29 £36.2119.00 (3/4”) 9.0kg -1070K £88.30 £63.58

Industrial QualityAirline Hose

Multi-purpose flexible clear PVC hosereinforced with a polyester fibre braid. Usedin pneumatic airline systems, crop spraying,transportation of gases and liquids,decanting of acids, salts and many otherchemicals. Also fully approved for foodcontact applications. Operating temperaturerange of -20°C to +60°C.Maximum pressure ratings: 6.35mm bore - 250psi 9.50mm bore -150psi, 12.7mm bore - 130psi, 19.0mmbore - 100psi. Supplied in 30mtr (100ft) reels.

Size Weight Order Code List Offereach KEN-258 Price/1 Price/1

20m 4.5kg -5100K £51.89 £37.36

Through Flow Air Hose Open drum 20m air hose reel.Easy wind reel mechanism. Withhigh impact resistant drum andguide walls. ½” air hose fittedwith two ear hose clips and standard PCLcouplings for ½” hose. 15 bar working pressure. The axial supplyallows the hose to be wound and unwoundduring operation. Supplied complete with1.5m supply connection hose and wallmounting hooks.

Retractable AirHose Balancer

With adjustable tension return retractswhen the air tool is released leaving thework place clear of unwanted lengths of airhose. Ideally suited for in-line production.With spring loaded safety clip for overhead fixing.Hose length:700mm.Bore diameter:6.35mm.Maximum pressure rating:100PSI.

Maximum Weight Order Code List OfferTool Weight each KBE-280 Price/1 Price/1

1.5kg 850g -1000K £73.72 £63.40

BalancersWith a tension adjustment and a cable stopit retracts for convenient storage offrequent used tools. A safety chain canalso be attached at the top, where a hole is provided.

Range Length Housing Order Code List Offer(kg) CTL-280 Price/1Price/1

0.5-0.9 1.6m High -7800A £33.00£28.380.9-1.8 1.6m Impact -7810B £33.00£28.381.8-2.7 2.0m Composite -7820C £58.00£49.882.7-3.6 2.0m -7830D £60.00£51.600.4-2.3 2.4m Pressed -7840E £67.00£57.621.8-4.5 2.4m Steel -7850F £79.80£68.63

Abra

sives &

Pow

er To

ols

20METRE

30METRE

Air & WaterHose Reels

RetractableFor use on assembly lines, service vans,workshops, etc. Helps to eliminate air hoseentanglement hazards in the workplace.Can be fixed to the wall or ceiling. UVstabilised impact resistant plastic case.Locking ratchet. Smooth retraction. 1.5mconnection hose. Male inlet and outletmade from solid brass. High quality rollformed drive spring. PVC hose rated to17bar. 160° pivot. Air tool hanging hole.Can be easily detached from the bracket.Inlet/outlet hose connection 1/4 BSP.

Model Size Order Code OfferNumber KBE-258 Price/1HRR006 6mm x 12m -2010K £84.99HRR008 8mm x 12m -2020K £84.99HRR010 10mm x 12m -2030K £84.99

Hose Size Order Code OfferType RLC-258 Price/1

Air/Cold Water 20m x 10mm -6010A £135.0015m x 13mm -6020B £150.00

Air/Hot Water 18m x 13mm -6100H £165.00

Air & WaterHose Reels

Air (red) and water (blue) hose reels helpeliminate hose entanglement hazards inthe work place. Case manufactured fromUV stabilised impact resistant plastic.Multi position ratchet allows the reel to befixed to the wall or ceiling. Smooth hoseretraction. Wide angle 160° pivotingmounting bracket.High quality PVC hose rated to 17 bar.


INDUSTRIAL HOSES & TUBESGROUP

258

Dia OD Order Code List OfferBore (mm) (mm) COP-258 Price/1 Price/1

12.5 18.5 -3510B £66.84 £60.1619.5 25.5 -3520C £96.23 £86.6125.5 34.5 -3530D £171.08 £153.97


13 20 -5210B £71.02 £63.9219 26 -5220C £97.74 £87.97

Contractors Hose

BCH SeriesThe unreinforced PVC contractors hose has been designed as ahigh quality flexible and durable low pressure water hose.Colour black. Supplied in 75m coils.

Special Features:Excellent abrasion resistance.Manufactured from cadmium-free materials.Resistance to a wide range of chemicals.Outstanding UV/ozone resistance.Silicone-free.Flexible.High quality fluted water hose.Medium duty cold water hose.

Polyurethane Tube CPU SeriesCodeflex polyurethane tube is suitable for a wide range ofapplications demanding a flexible and cut resistant tube inapplications such as pneumatic control systems and chemicaltransfer tubing. Codeflex polyurethane is well suited toapplications demanding maximum kink resistance, minimum kinkmemory. It is suitable for fitting into confined spaces whereconventional tubes lacking the above factors would increase fittingtime in addition to flow restriction.Applications:Pneumatic control systems.Fuel and lubrication lines.Chemical transfer tubing.Special features:Exceptional abrasion resistance.Resistance to a wide range of chemicals.High flexibility.Silicone-free.Working pressures:Nominal working pressure calculated at 23°C with a 4.1 safety factor.Temperatures:-50°C/55°C (short term use at 85°C).Special note:FittingsThe CPU series has been designed and developed to meet theexacting standards of the push fit type of coupling. Supplied as 30 metre coils.

Suprene Air Hose GP1 seriesSuprene GP1 air hose is a unique combination of rubber and PVC toproduce Rubber PVC alloy (TPE). This innovative step has resulted inthe introduction of Codeflex supreme GP1 air hose. This hose feelsand looks like rubber without the associated negative aspects.Codeflex Suprene GP1 is fully flexible and is available from 5mmthrough to 25mm. The smaller diameters are black with yellow stripeand 13mm and above are in opaque yellow outer sheath.Improved fire retardancy. Tested to BS 2782 Part 1, method 141Aon sample cut to 6mm wide. GP1 range has a CO1 rating of 25% O2.Conforms to ISO 5774: 1980.


5 13 -5110B £92.56 £83.3010 18 -5120C £122.25 £110.0319 29 -5150F * £78.30 £70.47

Suprene Fluted Water HoseGPW SeriesGeneral purpose, Suprene fluted water hose is fully flexible and isavailable from 13mm through to 25mm and exceeds therequirements laid down in BS 3746.Colour black. Supplied in 50m coils.Special Features:Excellent abrasion resistance.Manufactured from cadmium-free materials.Resistance to a wide range of chemicals.Outstanding UV/ozone resistance.Silicone-free.Flexible.High quality fluted water hose.Medium duty cold water hose.

*Hose assembly supplied with double lock quick release safetyclamps, 15m length.

Special Features:Abrasion resistance excellent.Outstanding resistance toageing.Manufactured from cadmium-free materials.Resistance to a wide range ofchemicals.Good flexibility.

Reduced plasticiser migration.Good kink resistance.Improved resistance tooil/fuels.Outstanding UV/ozoneresistance.Silicone-free.Working temperature -30°C to60°C.

Dia Working Colour Order Code List OfferBore (mm) Pressure PSI COP-258 Price/1 Price/1

4 x 2.5 172 Natural -4900A £10.13 £9.124 x 2.5 172 Blue -4902C £10.13 £9.126 x 4.0 150 Natural -4910D £16.93 £15.246 x 4.0 150 Blue -4912F £16.93 £15.248 x 5.0 124 Natural -4920G £26.33 £23.70

10 x 7.5 110 Natural -4930K £41.80 £37.6210 x 7.5 110 Blue -4932M £41.80 £37.6212 x 9.0 105 Natural -4940N £66.72 £60.05

Suppliedin 30mcoils

Abra

sives

& P

ow

er

Tools

INDUSTRIAL HOSES & TUBESGROUP

258


PTFE TubingPTFE seriesExtruded from chemically inert compound, PTFE thin walled tubingsuitable for a wide range of applications. Service pressure shouldbe 1/3rd of the burst pressure.Pressure Temperature RelationsTemp °C : 23 50 100 150 250Pressure Fall: 0% 50% 65% 70% 90%Special Features:Excellent resistance to chemicals.Temperature range -60°C to 250°C.Low coefficiency of friction.FDA approved.Weather-resistant.Electrical insulation properties.Colour: natural

Low Density Polyethylene TubeLDP seriesLow density polyethylene tube has been greatly used for many yearsin a wide variety of applications. It has mainly been associated withthe conveyance of beer and soft drinks for the brewery industry andwater for domestic services, however it is suitable for manyapplications requiring a relatively low cost material and has goodresistance to many liquids and chemicals. It has also been used in the pneumatics field in spite of its low abrasion and cut resistance.

Special Features:Resistant to wide range of chemicals.High flexibility.Silicone-free.Colour: natural.Supplied in 30m coils.

Bore Max. Working Order Code List OfferSize (mm) Pressure PSI COP-258 Price/1 Price/1

25 83 -7710A £172.15 £154.9432 77 -7720B £236.25 £212.6238 62 -7730C £247.43 £222.6951 58 -7740D £301.23 £271.11

Suction & Discharge HoseMDS seriesMedium duty, flexible suction/discharge hose.Colour: olive green.Operating temperature -15°C to 65°C.

Special FeaturesNew improved flexible formulation.Suction and discharge of slurry and semi liquid products.Usage for higher vacuum applications.Operating temperature up to 65°C.Flexible in colder temperature environment.Available in straight cured lengths.Supplied in 30m coils.

Dia Working Order Code List OfferBore (mm) Pressure PSI COP-258 Price/1 Price/1

4 x 2.5 230 -7400A £9.68 £8.715 x 3.0 226 -7410D £11.94 £10.756 x 4.0 200 -7420G £15.86 £14.278 x 6.0 160 -7430K £23.76 £21.38

10 x 8.0 118 -7440N £47.61 £42.8512 x 10.0 90 -7450R £63.46 £57.11

Coil Dia Burst Order Code List OfferLength Bore (mm) Pressure PSI COP-258 Price/1 Price/1100m 4 x 2.5 1450 -7904D £211.48 £190.3350m 6 x 4.0 1218 -7914H £133.71 £120.3450m 8 x 6.0 812 -7924M £199.29 £179.36

Industrial Layflat Hose

LH seriesLight duty blue industrial layflat – LH series silicone-free. Generalpurpose hose suitable for drainage of locations with smalldifferences in elevation; temporary water supply: sprinklerirrigation or due to its resistance to most chemicals, for spreadingliquid fertilisers and agricultural chemicals.Special Features:Made from cadmium-free materials.Abrasive resistant.Good flexibility.Long service life.Minimal electrical conductivity.Tough, puncture-proof.Unaffected by the elements.Operating temperature: -25°C to 60°C.

Dia Max. Working Order Code List OfferPressure PSI COP-258 Price/1 Price/1

Light Duty Blue40 73 -7510B £23.21 £20.8952 66 -7520C £29.15 £26.2377 58 -7530D £40.44 £36.40

Medium Duty Yellow40 102 -7560H £31.51 £28.3652 102 -7570J £47.18 £42.4677 87 -7580K £93.11 £83.80

Nylon Tubing NMF Eurlon SeriesEurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, onmachinery utilising the latest technical improvements in extrusion calibration. Low moisture absorption whencompared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidityconditions. Seamless in construction with a smooth high gloss inner and outer surface. It is light, approximatelyone ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applicationssuch as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls.Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified inaddition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metricdimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grademeets the requirements of government regulations with regard to materials and articles in contact with foodunder UK Statutory instrument 1978 No.1927. Available for higher temperature applications, with heat resistingadditives in both semi rigid and flexible grades, subject to minimum manufacturing quantities.Special Features:Resistant to a wide range of chemicals.Silicone-free.

Excellent abrasion resistance.Mirror smooth inner for improved flow.Made from virgin polymer type 12.

Produced toexacting tolerances.Supplied in 30 metre coils.

Dia Colour Working Order Code List OfferBore (mm) PSI COP-258 Price/1 Price/14 x 2.5 Black -7000A £14.15 £12.734 x 2.5 Blue 377 -7000M £14.15 £12.734 x 2.5 Natural -7001B £14.15 £12.734 x 2.5 Green -7001N £14.15 £12.734 x 2.5 Red 377 -7002C £14.15 £12.734 x 2.5 Yellow -7002P £14.15 £12.736 x 4.0 Natural -7006G £22.59 £20.336 x 4.0 Black 348 -7006K £22.59 £20.336 x 4.0 Blue -7006N £22.59 £20.336 x 4.0 Green -7006R £22.59 £20.336 x 4.0 Red 348 -7007A £22.59 £20.336 x 4.0 Yellow -7007H £22.59 £20.338 x 5.5 Natural -7008B £43.42 £39.088 x 5.5 Black 319 -7008J £43.42 £39.088 x 5.5 Bluel -7008N £43.42 £39.08

Dia Colour Working Order Code List OfferBore (mm) PSI COP-258 Price/1 Price/18 x 5.5 Green -7008S £43.42 £39.088 x 5.5 Red 319 -7009B £43.42 £39.088 x 5.5 Yellow -7009K £43.42 £39.0810 x 7.0 Natural -7010L £56.21 £50.5910 x 7.0 Black 319 -7010R £56.21 £50.5910 x 7.0 Blue -7010W £56.21 £50.5910 x 7.0 Green -7010Z £56.21 £50.5910 x 7.0 Red 319 -7011E £56.21 £50.5910 x 7.0 Yellow -7011M £56.21 £50.5912 x 9.0 Natural -7012A £72.26 £65.0312 x 9.0 Black 305 -7012D £72.26 £65.0312 x 9.0 Blue -7012G £72.26 £65.0312 x 9.0 Green -7012K £72.26 £65.0312 x 9.0 Red 305 -7012N £72.26 £65.0312 x 9.0 Yellow -7013P £72.26 £65.03

Supplied in10m coils.

Abra

sives &

Pow

er To

ols


AIRLINE ACCESSORIESGROUP

259

FemaleThreaded

Male Threaded

‘Standard’ Couplings

The ‘industry Standard’ coupling. For use with air tools, garage,industrial air line supplies and test panels. Free air flow rate at7bar/100PSI: 35 to 42 cfm (990 to 1130ltr/min). Zinc plated allsteel construction, finished in hard wearing passivate. Stainlesssteel springs and balls. Positive single locking action preventsaccidental dislocation. For fixed applications - for couplings fortrailing hoses see ‘Vertex’ type below.

Product Thread Thread Order Code List OfferNumber Size Type PCL-259 Price/1 Price/1

AC21CF02 1/4” BSPT -1940Y £6.54 £5.76AC21EF 3/8” BSPT Female -1946F £7.76 £6.83AC21JF 1/2” BSPT -1946R £7.76 £6.83AC21CM 1/4” BSPT -1944D £6.54 £5.76AC21EM 3/8” BSPT Male -1946K £7.76 £6.83AC21JM 1/2” BSPT -1946W £7.76 £6.83AC21T02 3/8” BSPT Tailpiece -1948D £7.76 £6.83


ACA2746 1/4” BSPT Female -1992X £1.37 £1.21ACA2593 1/4” BSPT Male -1985R £1.37 £1.21ACA6909 3/8” BSPT -1996D £1.37 £1.21ACA1793 1/4” Bore -1983P £1.37 £1.21ACA2487 5/16” Bore Tailpiece -1984Q £1.37 £1.21ACA2488 3/8” Bore -1984T £1.37 £1.21


AC91CF 1/4” BSPT Female -1983A £6.54 £5.76AC91CM 1/4” BSPT Male -1983D £6.54 £5.76

FemaleThreaded

Male Threaded

‘Standard’ Couplings

Compatible with the range of standard Kobe adaptors. Steel construction. Ideal for use in engineering/workshop environment.

‘Vertex’ CouplingsDesigned for use with Kobe airline couplings. ‘Third level' zinc plated for protection against corrosion.

FemaleThreaded

‘Vertex’ CouplingsAs ‘Standard’ type above but with slim profile, double lockingaction and additional collar to prohibit dirt ingress. Designed fortrailing hoses.

FemaleThreaded

MaleThreaded

Coupling AdaptorsDesigned for use with Kobe airline couplings. ‘Third level' zinc plated for protection against corrosion.

Integral Tailpiece

Male Threaded

FemaleThreaded

Coupling AdaptorsCase hardened with passivated finish. For use with ‘Standard’ and‘Vertex’ type couplings. Hard wearing passivated zinc finish fordouble protection against corrosion.

IntegralTailpiece

Male Threaded

Female Threaded

Thread Thread Order Code List OfferSize Type KBE-259 Price/1 Price/1

1/4” BSPT Female -6992X £1.25 £1.003/8” BSPT Male -6996D £1.25 £1.001/4” Bore Tailpiece -6983P £1.25 £1.003/8” Bore -6984T £1.25 £1.00


1/4” BSPT -6940Y £5.96 £4.773/8” BSPT Female -6946F £7.07 £5.661/4” BSPT Male -6944D £5.96 £4.77


1/4” BSPT Female -6983A £5.96 £4.77

Abra

sives

& P

ow

er

Tools


259


Product Thread Order Code List OfferNumber Size PCL-259 Price/1 Price/1

Female ThreadedAC4CF 1/4”BSPT -1980L £14.33 £12.61AC4EF 3/8”BSPT -1958T £14.33 £12.61

Male ThreadedAC4EM 3/8”BSPT -1959V £14.33 £12.61AC4JM 1/2”BSPT -1960B £14.33 £12.61


1/4” BSPT Female -6981H £8.24 £6.59


Female ThreadedAC71CF 1/4”BSPT -1981H £9.04 £7.96AC71EF 3/8”BSPT -1981M £9.04 £7.96AC71JF 1/2”BSPT -1981T £9.04 £7.96

Male ThreadedAC71CM 1/4”BSPT -1981K £9.04 £7.96AC71EM 3/8”BSPT -1981P £9.04 £7.96AC71JM 1/2”BSPT -1981W £9.04 £7.96

XF Series Couplings (EURO 130)A heavy duty design to meet the demandsof all manufacturing and end userapplications. Offering superior flowcharacteristics - free air flow at 7 bar/100psi : 135CFM (3820 Ltr/min). Quick release action with corrosionresistant plating compatible with Europeanadaptor styles CEJN320, RECTUS 25 and26 series.

FemaleThreaded

MaleThreaded

Female Threaded

MaleThreaded

IntegralTailpiece

XF Series Adaptors (EURO 130)For use with XF series Couplings.

XF Couplings

XF couplings and adaptors offers excellentflow characteristics providing the workshopwith increased airflow and enhanced toolefficiency. Steel construction with corrosiveresistant finish for longer life. The high flowrate - 130cfm at 100lbf/in², offers enhancedtool efficiency. Steel shoulder preventsaccidental disconnection. Nominal bore: 7.4mm. Flow rate @ 6bar: 2200 l/min @ 0.5bar p.d.Maximum working pressure: 35 bar (508 lbf/in²)Temperature range: -40°C to 100°C


Female ThreadedAA7106 1/4”BSPT -1106K £2.04 £1.80AA7107 3/8”BSPT -1107M £2.34 £2.06AA7108 1/2”BSPT -1108P £4.38 £3.85

Male ThreadedAA7102 1/4”BSPT -1102A £2.04 £1.80AA7103 3/8”BSPT -1103C £2.34 £2.06AA7104 1/2”BSPT -1104E £4.38 £3.85

Integral Tailpiece (non-threaded)AA7110 1/4”Bore -1110R £2.04 £1.80AA7112 3/8”Bore -1112B £2.04 £1.80AA7113 1/2”Bore -1113C £2.04 £1.80


Female ThreadedSC21CF 1/4”BSPT -4520A £10.43 £9.18SC21EF 3/8”BSPT -4522C £12.35 £10.87SC21JF 1/2”BSPT -4524E £12.35 £10.87

Male ThreadedSC21CM 1/4”BSPT -4518T £10.43 £9.18SC21EM 3/8”BSPT -4521B £12.35 £10.87SC21JM 1/2”BSPT -4523D £12.35 £10.87

Integral Tailpiece (non-threaded)SC21R 7mm (1/4”) -4528M £12.35 £10.87SC21S 8mm (5/16”) -4530P £12.35 £10.87SC21T 10mm (3/8”) -4532R £12.35 £10.87

XF SeriesCouplings

Euro 130Steel construction with corrosive resistant finish.

XF Series Adaptors (EURO 130)Corrosive resistant finish. For use with Kobe airline couplings.


1/4” BSPT Male -6102A £1.86 £1.49

FemaleThreaded

MaleThreaded

InstantAir Couplings & AdaptorsThe InstantAir range of couplings andadaptors are the original and genuineBroomwade bayonet fittings.Nominal bore: 5.6mm.Maximum flow rate: 54 cfm @100 lbf/in².Maximum working pressure: 17 bar (250 lbf/in²).Temperature range: -20°C to 80°C.CouplingsSteel bayonet type couplings, preventingaccidental disconnection. Suitable for mostfixed compressed air applications, althoughswivel adaptors are recommended for hose applications.


Female ThreadedAC51CF 1/4”BSPT -1980Z £7.83 £6.89


Female ThreadedAA5106 1/4”BSPT -1006M £4.37 £3.85

Male ThreadedAA5102 1/4”BSPT -1002H £4.37 £3.85

‘60 Series’ Couplings

Designed for general industrial applications- free flow air rate at 7 bar/100psi: 55 to60 CFM (1557 to 1698 ltr/min). All steelconstruction with hard wearing passivatefinish. Hardened steel shoulder to preventaccidental disconnection in use.

‘60 Series’ Coupling AdaptorsCase hardened with hard wearing passivatefinish for use with ‘60 Series’ couplings.

MaleThreaded

Tailpiece

MaleThreaded

FemaleThreaded

Twin Coupling AssemblyA quick and easy solution to providing twooperation points from a single air line. Fits directly into any single ‘Standard’ or ‘Vertex’ coupling.

PF AdaptorThis PF range of couplings and adaptorshas been designed to offer a competitivealternative to the genuine Schrader rangeof couplings and adaptors. For use with PFCouplings with a corrosive resistant finishand case hardened for longer life.


Male ThreadedACA2657 1/4”BSPT -1986M £3.40 £2.99

TailpieceACA2653 1/4”Bore -1986D £3.40 £2.99ACA2658 3/8”Bore -1986P £3.40 £2.99ACA2659 1/2”Bore -1986R £3.40 £2.99

Product Overall Order Code List OfferNumber Length PCL-259 Price/1 Price/1

StandardAC6103 180mm -1981A £21.02 £18.50

VertexAC6503 180mm -1981L £21.02 £18.50


MaleAA7702 1/4” BSPT -1702B £2.04 £1.80

AdaptorsSuitable for most fixed compressed airapplications, although swivel adaptors are recommended for hose applications.

Abra

sives &

Pow

er To

ols



259


Female ThreadedACA2994 3/8”BSPT -1994M £3.40 £2.99

Male ThreadedACA2999 3/8”BSPT -1994W £3.40 £2.99ACA3035 1/2”BSPT -1995G £3.40 £2.99

TailpieceACA3036 1/2”Bore -1995J £3.40 £2.99ACA3037 3/8”Bore -1995L £3.40 £2.99

Genuine ‘Schrader’Couplings

High flow, quick release couplings withlocking facility to prevent accidentaldisconnection. Swivel facility eliminateshose kinking. Free air flow rate at 7 bar/100psi: 50CFM(1400ltr/min).


1/4” BSPT Male -6998G £3.10 £2.481/4” BSPT Female -6998J £3.10 £2.481/4” Bore Tailpiece -6998A £3.10 £2.48

Genuine ‘Schrader’ Coupling AdaptorsCorrosive resistant finish. For use with Kobe airline couplings.

MaleThreaded

FemaleThreaded

1/4” NPT/BSP Convertors

Specially designed to allow British Standard airline couplings and adaptors to be fitted to 1/4” NPT threaded air tools. Also suitable for use in hydraulic lines and coolant flow systems. Passivated zinc finish for double protection against corrosion.

Fixed

Swivel

Genuine ‘Schrader’Couplings

Designed for use with KOBE airline couplings. ‘Third level' zinc plated for protection against corrosion.

Female Threaded

Integral Tailpiece


1/4” BSPT Female -7002A £17.12 £13.70

Type BSP x Order Code List OfferNPT KEN-259 Price/1 Price/1

Fixed 1/4” x 1/4” -4900K £6.60 £5.41Swivel 1/4” x 1/4” -4950K £2.54 £2.08

‘100 Series’ Couplings (Hi-Duty)Large diameter allows greater airflowmaking them suitable for industrialapplications - free air flow rate at7bar/100psi: 100 to 120cfm (2830 to3400ltr/min). All steel construction withhardened shoulder protects againstaccidental disconnection. Hard wearing passivated zinc finish.

‘100 Series’ Coupling Adaptors Case hardened with hard wearing passivatefinish. For use with ‘100 Series’ typecouplings.

Female Threaded

Male Threaded

Male Threaded

Integral Tailpiece

Female Threaded


Female ThreadedAC5EF 3/8”BSPT -1980N £18.03 £15.87AC5JF 1/2”BSPT -1980T £18.03 £15.87

Male ThreadedAC5EM 3/8”BSPT -1980Q £18.03 £15.87AC5JM 1/2”BSPT -1980X £18.03 £15.87

Thread Overall Weight Order Code List Offer(BSPT) Length each PCL-259 Price/1 Price/1

Male Threaded1/4” 46mm 35g -1998G £3.40 £2.99

Female Threaded1/4” 46mm 25g -1998J £3.40 £2.99

Integral Tailpiece (non-threaded)1/4” Bore 65mm 10g -1998A £3.40 £2.995/16” Bore 60mm 25g -1998E £3.40 £2.993/8” Bore 60mm 25g -1998C £3.40 £2.99

MaleThreaded

Genuine ‘Schrader’ Coupling AdaptorsCase hardened, zinc finish. For use with‘Schrader’ type couplings.

FemaleThreaded

FemaleThreaded

Thread Overall Weight Order Code List Offer(BSPT) Length each PCL-259 Price/1Price/1

Female Threaded1/4” 45mm 120g -2002A £18.79 £16.54

Male Threaded1/4” 55mm 130g -2002C £19.36 £17.043/8” 60mm 135g -2002E £19.36 £17.04

Integral Tailpiece

MaleThreaded

FemaleThreaded

‘Schrader’ Heavy Duty CouplingsFree air flow rate at 7 bar/100psi: 110CFM (3080ltr/min).


Female Threaded1/2” 60mm 175g -2003F £34.79 £30.62

‘Schrader’ Heavy Duty Coupling AdaptorsCase hardened, zinc finish. For use with ‘Schrader’ type couplings.

MaleThreaded

IntegralTailpiece


Male Threaded1/2” 55mm 85g -1999W £5.07 £4.46

Integral Tailpiece (non-threaded)3/8” Bore 72mm 45g -1999R £5.07 £4.461/2” Bore 72mm 65g -1999T £5.07 £4.46

Abra

sives

& P

ow

er

Tools


259


Tailpieces & Threaded Connectors

A comprehensive range designed for use in conjunction with airlinecouplings in garage and industrial applications. Case hardenedwith zinc finish.Male Threaded TailpiecesFor connecting a hose to a female threaded fitting.

Airline Accessories

Flexible ElbowFlexible elbow (female to male). A flexible connection used to eliminate hose kinks.


FE101 1/4” BSPT Male/ -3131B £10.49 £9.23Female

Parallel SocketParallel socket (Female to Female).


HC6889 1/4” BSPT Female -3369R £1.34 £1.18

Product Thread Bore Order Code List OfferNumber Size Size PCL-259 Price/1 Price/1

HC5656 1/4” Bore -3368N £1.12 £0.99HC1217 1/4” BSPT 3/8” Bore -3360M £1.12 £0.99HC2479 1/2” Bore -3362A £1.12 £0.99HC6904 1/4” Bore -3371T £1.56 £1.37HC2951 3/8” BSPT 3/8” Bore -3365D £1.56 £1.37HC2808 1/2” Bore -3364C £1.56 £1.37

Male Threaded Tailpieces

Designed for use with KOBE Airline Couplings. 'Third Level' Zinc Plated for protection against corrosion.

Thread Bore Order Code List OfferSize Size KBE-259 Price/1 Price/1

1/4” Bore -8368N £1.02 £0.821/4” BSPT 3/8” Bore -8360M £1.02 £0.82

1/2” Bore -8362A £1.02 £0.823/8” BSPT 3/8” Bore -8365D £1.42 £1.14

Union NutsFor use in conjunctionwith coned tailpieces toconnect hose to malethreaded fittings.

Product Bore Order Code List OfferNumber Size PCL-259 Price/1 Price/1

HC5194 1/4” -3367H £0.49 £0.43HC1226 3/8” -3360Y £0.49 £0.43

Double Ended TailpiecesDesigned for use with KOBE AirlineCouplings. 'Third Level' Zinc Plated forprotection against corrosion.

Bore Order Code List OfferSize KBE-259 Price/1 Price/1

1/4” x 1/4” -8365T £1.07 £0.86

Bore Order Code List OfferSize (BSPT) KBE-259 Price/1 Price/1

1/4” x 1/4” -8368X £1.22 £0.98

Male Threaded UnionsFor connecting female threaded fittings of the same size.

Female Threaded Y-PieceFor providing two airlines from a single supply.

Male Threaded Reducing UnionsFor connecting female threaded fittings of different sizes.

Male to Female Threaded Reducing UnionsFor connecting female threaded fittings to male threaded fittings of a smaller size.

Product Bore Order Code List OfferNumber Size (BSPT) PCL-259 Price/1 Price/1HC6899 3/8” x 1/4” -3370K £1.25 £1.10HC6900 1/2” x 1/4” -3370M £1.77 £1.56HC6901 1/2” x 3/8” -3370S £1.77 £1.56

Product Thread Order Code List OfferNumber Size (BSPT) PCL-259 Price/1 Price/1

HC6895 3/8” x 1/4” -3370A £1.04 £0.92HC6896 1/2” x 1/4” -3370C £1.34 £1.18HC6897 1/2” x 3/8” -3370E £1.34 £1.18


SPR4279 1/4” BSPT -4420D £3.36 £2.96

Coned TailpiecesFor use in conjunction with union nuts to connect hose to male threaded fittings.

Double Ended TailpiecesFor joining two lengths of hose or repairinga hose.

Male Threaded UnionsFor connecting female threaded fittingsof the same size.

Product Bore Order Code List OfferNumber Size PCL-259 Price/1 Price/1HC2983 1/4” x 1/4” -3365P £1.16 £1.02HC2985 3/8” x 3/8” -3365T £1.17 £1.03HC2986 1/2” x 1/2” -3365W £2.59 £2.28

Product Bore Order Code List OfferNumber Size PCL-259 Price/1 Price/1

HC5275 1/4” -3367W £0.76 £0.67HC1225 3/8” -3360W £0.76 £0.67

Product Bore Order Code List OfferNumber Size (BSPT) PCL-259 Price/1 Price/1HC6560 1/4” x 1/4” -3368X £1.34 £1.18HC4281 3/8” x 3/8” -3366R £1.53 £1.35HC6898 1/2” x 1/2” -3370G £2.09 £1.84

Abra

sives &

Pow

er To

ols



259

Filter Elements

Type TTo suit AFRL_

Type RTo suit

AR_ & AFR_

Type FTo suit

AF_ & AL_

Mounting Brackets

Model To Order Code OfferNumber Suit KEN-259 Price/1AMB2F AF240, AL2 -6000K £0.95AMB3F AF3-40, AL3 -6010K £1.59AMB4F AF4-40, AL4 -6020K £2.23

AMB2R AR2-10, AFR2-41 -6030K £0.80

AMB3R AR3-10, AFR3-41 -6040K £1.27

AMB4R AR4-10, AFR4-41 -6050K £1.59

AMB2T AFRL2-41 -6060K £3.02AMB3T AFRL3-41 -6070K £5.57AMB4T AFRL4-41 -6080K £5.35

Model To Order Code OfferNumber Suit KEN-259 Price/1

AFE2-5 AF2, AFR2, AFRL2 5µm -5600K £2.17















Model Size Order Code OfferNumber KEN-259 Price/1AFR2-41 G1/4 40µm -5800K £22.30AFR3-41 G3/8 40µm -5810K £38.44AFR4-41 G1/2 40µm -5820K £60.48

Air FilterUnits

Manual drain fitted as standard. Auto drain option. Rugged metal bowl guards. Simple 90° bowl removal.These conventional filters can be used individually orin conjunction with combination airpreparation units.Technical Specifications:Medium: compressed air.Temperature range: -10°C to 60°C.Max input pressure: 10 bar.FiltrationStandard: 40µm.Options: 5, 25, 50, 100µm.Materials:Body: diecast aluminium.Seals: nitrile.Filter bowl: polycarbonate with steel bowl protector.Filter element: sintered bronze.Manual drain: Ryton®-PPS.

Model Size Order Code OfferNumber KEN-259 Price/1AR2-10 G1/4 0.5 to 10 bar -6100K £11.47AR3-10 G3/8 0.5 to 10 bar -6110K £24.42AR4-10 G1/2 0.5 to 10 bar -6120K £39.77

Model Size Order Code OfferNumber KEN-259 Price/1AF2-40 G1/4 40µm -5500K £13.47AF3-40 G3/8 40µm -5510K £21.02AF4-40 G1/2 40µm -5520K £35.02

Air Filter Regulator CombiPush-to-lock non-rising regulator controlknob. Consistent pressure setting. Autodrain option. Rugged metal bowl guards.These conventional filter-regulator units canbe used individually or in conjunction with combination air preparation units.Technical Specifications:Medium: Compressed air. Temperature range: -10°C to 60°C. Pressure rangeStandard:Input 0.5 to 10 bar.Output 0.5 to 10 bar. Options: 0.2 to 2 bar,0.2 to 4 bar, 0.5 to 7 bar. FiltrationStandard: 40µm. Options: 5, 25, 50, 100µm. Max input pressure: 10 bar. Gauge ports: G1/8 (two).

Air Regulator UnitsPush-to-lock non-rising control knob. Consistent pressure setting. Two gauge ports forversatile unit location. Complete with neck-mountingring. These conventional pressure regulators can beused individually or in conjunction with combination air preparationunits.Technical Specifications:Medium: compressed air.Temperature range: -10°C to 60°C.Pressure rangeStandard:Input 0.5 to 15 bar.Output 0.5 to 10 bar.Options:0.2 to 2 bar,0.2 to 4 bar,0.5 to 7 bar.Max input pressure: 15 bar.Gauge ports: G1/8 (two).MaterialsBody: Diecast aluminium.Seals: Nitrile.Control knob: Ryton®-PPS.Control knob housing: Ryton®-PPS.Diaphragm: Nitrile.

External Auto Drain ValveFor use with the AF air filter units and AFRair filter regulator combi units. Theseexternal automatic drain valves are of thenormally open float type. As the pressure inthe filter bowl exceeds 2 bar the drain valveoutlet closes. As the condesate levelincreases, the drain passage opensallowing the water to drain out. When thecondesate level decreases the drainpassage closes.

Model Size Order Code OfferNumber KEN-259 Price/1AVD-V3 G3/8 2/2 -6280K £19.37

Abra

sives

& P

ow

er

Tools


259


Air Preparation CradleCombined Filter-Regulator-Lubricator modular unit. Housed in a rugged stove enamelled steel cage. Manual filter drain. Push to lock non rising regulator control knob. Constant lubricator oil flow and very low pick-up pressure. Filters out condensate build up from compressor through mains close to point of use. Lubricates near to air tools. Prolongs life of air tools. Accessability of air to work location. High flow rate allows multiple air tool use. Adjustable pressure range 0.5 to 10 bar. For use in garages (very high automotive use), machine shops, joinery industry, sheetmetal industry and any industry where air tools or spray gunsare used.

Model Size Order Code OfferNumber KEN-259 Price/1

AL2 G1/4 -5900K £18.31AL3 G3/8 -5910K £20.86AL4 G1/2 -5920K £31.84

Electronic Auto Drain ValveElectronic timer for ultimate reliability. Adjustable interval anddischarge times. Self cleaning valve needs no maintenance. LEDindicators show operational status. Impulse test button. Suppliedwith full instructions. Includes tamper proof kit.Technical SpecificationsElectronic Timer:Power 'ON' LED. Valve 'OPEN' LED.Interval time: 0.5 to 45 min.Discharge time: 0.5 to 10 sec.Solenoid Valve: 0 to 16 bar.Function: 2/2 NC. Port connections: G3/8.Main pressure range: 0 - 16 bar max.Filtration: strainer recommended.Temperature range:Ambient -10°C to +50°C.Media -10°C to +140°C.Lubrication: not required.Media: air, gases, non-corrosive liquids.Timer & Solenoid Valve AssemblyElectrical data: AC 220V, 50Hz, 19W AC 110V, 50Hz, 28W.Insulation: Class H 180°C. Protection: I P 6 5 (with connector).Temperature range: -10°C to +140°C.Materials Solenoid ValveTube and plunger: stainless steel. Spring: stainless steel.Body: brass. Seals: Buna.

Air Filter Regulator Lubricator CombiManual filter drain fitted as standard. Auto drain option.Push-to-lock non-rising regulator control knob. Constantlubricator oil flow & very low pick up pressure. Ruggedmetal bowl guards. These fully assembled unitscomprise a conventional combined filter - regulator and lubricatorin modular configuration.Technical Specifications:Medium: compressed air. Temperature range: -10°C to 60°C. Pressure range:Standard: Input 0.5 to 10 bar.Output 0.5 to 10 bar. Options: 0.2 to 2 bar, 0.2 to 4 bar, 0.5 to 7 bar. FiltrationStandard: 40µm. Options: 5, 25, 50, 100µm. Max input pressure: 10 bar. Gauge ports: G1/8 (two).Materials:Body: Diecast aluminium. Seals: nitrile. Filter/Lubricator bowl: polycarbonate with steel bowl protectors. Filter element: sintered bronze. Recommended oil: ISO VG32 (ServoSystem 32). Control knob: Ryton®-PPS. Control knob housing: Ryton® -PPS. Manual drain: Ryton®-PPS. Diaphragm: nitrile.

Air Lubricator UnitsOil fog type. Constant oil flow and very low pickup pressure. Can be filled under pressure. Highcapacity metal reservoirs. Simple 90° bowlremoval. These conventional lubricators can beused individually or in conjunction withcombination air preparation units.Technical Specifications:Medium: compressed air.Temperature range: -10°C to 60°C.Max input pressure: 10 bar.MaterialsBody: diecast aluminium.Seals: nitrile.Bowl: polycarbonate with steel bowl protector.Adjustment knob: Ryton®-PPS.Recommended oil: ISO VG32 (Servo System 32).


AVD220 220V -6200K £95.50


AFRL2-41 G1/4 40µm -5830K £67.29AFRL3-41 G3/8 40µm -5840K £94.21AFRL4-41 G1/2 40µm -5850K £115.73

Air Filter-Regulator-Lubricator Units

Offers all the advantages of air treatment in a compact unit. Filterunits are dual purpose, manual and automatic drain. Regulators are self bleed with a mist lubricator. All filter regulatorand lubricator units are BSP threaded and can be fitted with anypressure gauge shown below. 0 - 8 bar, 20 micron capacity. Flow tests have been carried out using computerised testing equipment following recommendations approved to ISO/DIN 6358/2with pneumatic gauging to ISO 5167.

Gauge not included.

Thread Sizes Weight Order Code List OfferBSP (Female) each KEN-259 Price/1 Price/1

1/4” x 1/4” 1.0kg -8040K £57.64 £47.263/8” x 3/8” 2.0kg -8060K £77.30 £63.391/2” x 1/2” 2.1kg -8080K £84.66 £69.42

Model Size Delivery (@7bar) Order Code OfferNumber KEN-294 Price/1

KFKNSS10059 1/2” 3000L/min(106cfm) -3001B £157.08

For Compressors

Abra

sives &

Pow

er To

ols

SeeGroup

273



259

Face Pressure Weight Order Code List OfferDiameter Bar each KEN-259 Price/1 Price/1

40mm0 - 12 55g -8240K £8.17 £6.700 - 4 50g -8280K £8.17 £6.70

50mm0 - 12 70g -8320K £8.17 £6.700 - 4 70g -8360K £8.17 £6.70

Part Overall Weight Order Code List OfferNo. Length each PCL-259 Price/1 Price/1

TPG4H03 150mm 70g -4704V £10.53 £9.27

Max. Pressure Weight Order Code List OfferReading each KEN-503 Price/1 Price/1170psi 720g -8480K £46.85 £29.05

Max. Pressure Weight Order Code List OfferReading each KEN-503 Price/1 Price/1

120psi 635g -8520K £62.95 £39.03

Air Line Tyre InflatorThis push on type tyre inflator isrobust and has a dial type pressure gauge reading up to a maximum of 170psi. The pressure gauge is protected from accidental damage by a rubber shock guard.

Heavy Duty Air Line Tyre Inflator with GaugeThis heavy duty push on inflator is of rugged construction and hasa clearview integral pressure gauge reading from 10 - 120psi.

Pressure GaugesFitted with a 1/8” BSP brassthread, can be used tomeasure PSI and bar readings and can be fitted directly onto any filter regulator - lubricators. Available in two diameter sizes (40mm and 50mm), made from tough ABS plastic. Back entry fittings.

Max. Pressure Weight Order Code List OfferReading each KEN-503 Price/1 Price/1

64psi 125g -8440K £14.95 £9.27



Deluxe Type Tyre Pressure GaugeIn the interests of safety, tyre pressures should be checked atleast once a week when the tyres are cold. This is because themanufacturers recommended pressures are based on cold tyrereadings. This pressure gauge has a long body, ideal for use on cars, vans, lorries, plant and equipment etc. It is very robust in construction and has a maximum pressure reading of 120psi.

Air Lube Oil

Excellent air release quality, low foaming ability andresists clogging. Contains anti-rust and anti-wearadditives. Extremely resistant to water absorption andcan be mixed with all mineral oil based lubricantswithout draining the system. Can be used on air tools. ISO Grade VG22.

Thread Weight Order Code List Offer(BSP) each KBE-280 Price/1 Price/1

1/4” 110g -1900K £10.57 £9.09Thread Weight Order Code List Offer(BSP) each KBE-280 Price/1 Price/1

1/4” 130g -1400K £5.29 £4.55

Water Separator Continuously removes moisturefrom the air supply helping toprevent corrosion to theinternal components of the airtool. The spring valve allows immediatedraining of reservoir without any downtime.

MiniOiler

Feeds oil directly into the airline ensuring your air tool is well lubricated at all times preventing corrosion. The clear body reservoir allows immediate inspection of the oil level. All brass construction.

Pencil Type Tyre Pressure GaugeThis push-on gauge is suitable for cars, vans and light commercials, where readings of up to 120psi are necessary. It is of chrome plated brass contruction with a pen type pocket clip.

Dial Type Tyre Pressure GaugeThis push-on type pressure gauge is graduated in psi and bar up to a maximum of 64psi (4.5bar). The reading is held until the release button is pressed.

ForAirline

SeeGroup

258

Abra

sives

& P

ow

er

Tools Tyre Pressure

Service GaugeThe universal dual headed gauge is designed for twin tyres but issuitable for all cars and commercial vehicles. The gauge isdesigned and engineered for hard usage over long periods. Thisgauge includes a solid alloy indicator with easy to read figures anda self-adjusting friction device, enabling pressure readings to betaken when the tyre gauge is removed from the tyre valve. A positive sealing washer ensures reliability.Pressure measuring range:10-120 lbf/in2 in 2 lb units &0.8-8.2 bar in 0.2 bar units

Container Container Order Code List OfferType Size KEN-732 Price/1 Price/1

Poly Bottle 500ml -8000K £6.90 £5.52Poly Bottle 5ltr -8050K £37.28 £29.82


259


Abra

sives &

Pow

er To

ols

Tyre Valve Connector For use on car tyres, commercial vehicles, motorcycles andgeneral industrial applications. A pin unseats on connection to atyre valve allowing air flow. Scale reading of 140lbf/in2

and 0 - 10 bar.

Product Connector Weight Order Code List OfferReference Type each PCL-259 Price/1 Price/1C01A03 Hold-on 100g -3001A £9.18 £8.08

Pocket TypeThe gauge head and body are manufactured from solid brass witha heavy duty chrome vanadium plated finish. The sliding pressureindicator is manufactured from solid, heavy duty alloy and clearlymarked with units of pressure. The easy read pressure indicatorincorporates a self-adjusting friction device enabling pressures tobe read when the gauge is taken off the valve. A positive sealingwasher ensures reliability.Angled head for easy placement on valve head.

TPG1H05 Pressure range: 6 - 50Ib/in2 in 1Ibf/in2 units. TPG3H519 Pressure range: 0.5 - 3.4 bar in 0.1 bar units.

Tractor Tyre TypeThe tractor gauge can be used on air filled or water ballasted tyresand incorporates a pumping rod for expelling liquid and an oil holefor lubrication. Readings can be taken on or off the valve. This unitincludes a solid alloy indicator with easy to read figures. The outercase is brass and finished in a high polish chromium.

TPG15M03 Pressure range: 6 - 50 Ibf/in2 in 1Ibf/in2 units and 0.5 - 3.4 bar in 0.1 bar units.

Tyre Inflation Equipment

MK3 Airline GaugesDiecast lightweight body with pressed steel trigger. Replaceablevalve assembly requires less maintenance. Impact absorbingrubber bumper and magnified scale for easy reading. Hose lengthof 53cm and body length of 270mm x 50mm. Scale: 0 - 140psi/0 - 10 bar. Each gauge is supplied with a certificate of calibration and operating instructions.

Complies with EC directive 86/217/EEC(bar scale only).

Product Connector Weight Order Code List OfferReference Type each PCL-259 Price/1 Price/1ALG3HO3 Hold-on 1.0kg -2005F £64.18 £56.48ALG3HO4 Clip-on 0.9kg -2006G £62.95 £55.40

Product Overall Weight Order Code List OfferReference Length each PCL-259 Price/1 Price/1TPG1H05 112mm 35g -4701T £5.27 £4.64TPG3H519 112mm 35g -4703S £5.65 £4.97

Product Overall Weight Order Code List OfferReference Length each PCL-259 Price/1 Price/1TPG15M03 165mm 70g -4715D £23.70 £20.86

Product Connector Hose Order Code List OfferReference Type Length PCL-259 Price/1 Price/1AFG1HO3 Twin Hold-on 21” -2004A £69.14 £60.84AFG1HO6 Twin Clip-on 9” -2004K £80.67 £70.99AFG1HO8 Euro Connect on 6” -2004T £57.62 £50.71

Airforce Tyre InflatorSuitable for tyreshops, garages, car dealers and transport depots.The AirForce has been developed with tough engineering plasticsto meet the exacting specifications of high volume and intensiveapplications. Clear dial display, modern, lightweight and shockresistant construction. Direct valve design increasing inflation anddeflation rates. Built in swivel and hanging device.

Exceeds EC Directive 86/217/EEC.Conforms to BS EN 12645:1999.Calibration type: 0 - 170 ibf/in2 and 0 - 12 bar.Air inlet: 1/4” BSP.

Product Connector Hose Order Code List OfferReference Type Length PCL-259 Price/1 Price/1DAC1AO3 Twin Hold-on 21” -3023A £97.95 £86.20DAC1AO6 Twin Clip-on 9” -3026D £109.48 £96.34

Accura 1 Tyre InflatorThe Accura 1 is a robust yet sophisticated handheld electronic tyreinflator designed to break the mould of existing handheld tyreinflation. With leading electronics and sensor technology as wellas patented software algorithms it offers fast, accurate andtrouble-free tyre inflation and deflation. Robust electronic designwith a modern, lightweight and shock resistant construction. Clearand easy to read digital display with a ceramic sensor abd a builtin swivel and hanging device. Proprietary software increasingaccuracy, fine metering and eliminating the chance of falsereadings. Direct valve design increasing inflation and deflationrates with an over pressure warning if pressure exceeds 12 bar/174lbf/in²/1200kPa. Individually tested and certified, Exceeds EC Directive 86/217/EEC.Accuracy: Exceeds EC Directive 86/217/EEC.Reading accuracy:0.01 bar/0.2 lbf/in²/1kPa.Maximum inflation pressure:15 bar/218lbf/in²/1500kPa.Inflation range:12 bar/174lbf/in²/1200kPa.Operating temperature:–20°C to 60°C.

Guaranteedaccuracy -

individual testing



259Abra

sives

& P

ow

er

Tools

Blow Gun

Ideal for awkward and general air dusting jobs. 110mm longangled nozzle allowing projection of airflow directly to requiredarea. Ergonomic design with trigger style operation. Lightweightand impact resistant nylon body with hanging point and integral aircontrol valve. 1/4” brass BSPT inlet. Minimum working pressure43psi (3 bar). Safe working pressure 150psi (10 bar).

-5010K

-5000K

Temperature Weight Order Code List OfferRange each KBE-259 Price/1 Price/1

-10 to 50°C 120g -5000K £5.78 £4.62-17 to 37°C 230g -5010K £8.76 £7.01

Blow Guns Made from die cast alloy for long trouble-free life. Inlet thread 1/4" BSPT. Health and safety regulations dictate that an in-line regulator should be used to restrict pressure to 28psi.Standard GripWith safety nozzle.

Product Overall Weight Order Code List OfferReference Length each PCL-259 Price/1 Price/1BGN466 230mm 30g -2466K £4.71 £4.14

Blow Gun

Manufactured from bright nickel chrome plated die cast alloy for a long trouble free life. Complete with safety nozzle as standard. 1/4” NPT air inlet. Normal working pressurewith safety nozzle intact is 90psi. If safety nozzle is removed asafe working pressure of 30psi is recommended.

Flexible ExtensionThe extended flexible nozzle can be bent into any position to allowyou to direct the air flow to exactly the area yourequire it in. Suitable for use withstandard and plastic blow guns.

Overall Weight Order Code List OfferLength each KEN-259 Price/1 Price/1100mm 140g -5050K £8.12 £6.66

Overall Weight Order Code List OfferLength each KEN-259 Price/1 Price/1250mm 10g -5100K £11.11 £9.11

Product Type Weight Order Code List OfferReference each PCL-259 Price/1 Price/1

BG405 Blow Gun 235g -2320R £9.61 £8.46BGN461 Safety Nozzle -2461H £2.01 £1.77

Type Weight Order Code List Offereach PCL-259 Price/1 Price/1

Pistol Grip 105g -2404H £8.67 £7.63Blow Gun

Product Weight Order Code List OfferReference each PCL-259 Price/1 Price/1

BG106 200g -2106A £8.91 £7.84

Product Weight Order Code List OfferReference each PCL-259 Price/1 Price/1BG5002 100g -2402G £6.97 £6.13

Plastic Blow Gun The body is moulded from a special acetalic resin to resist damage, staining and contamination with a 100% brass inner valve. The blow gun adjusts the airflow gradually for delicate working. Suitable for use with both air and water. Recommended maximum working pressure of 18 bar (265psi).

Rigid Extension NozzleSuitable for use with both standard and plastic blow guns.

Pistol Grip Blow GunManufactured from high qualitydie-cast alloy, giving the tool along trouble-free life.Robust/compact design. Suppliedwith interchangeable conical andsafety nozzles. Extensive, easy tofit, additional nozzle range.

Pistol GripBlow Gun

Moulded anti-slip body manufactured from a special acetalycresin to resist damage,staining andcontaminationwith a 100% brass inner valve.The blow gun adjusts the airflowgradually for delicate working.With 110mm long safety nozzle foraccess into awkard areas. Suitable foruse with both air and water. Recommended maximum working pressure of 18 bar (265psi).

SPRAY GUNSGROUP

259


Abra

sives &

Pow

er To

olsFeed Weight Order Code List Offer

Type each STA-259 Price/1 Price/1Gravity (600cc) 100g -1500A £9.03 £7.77

Suction (1000cc) 50g -1510B £14.80 £12.73Set of No. 4

Baffles & No. 7 10g -2500A £1.89 £1.63Cup Gaskets

Feed Size Weight Order Code List OfferType (mm) each STA-259Price/1Price/1Gravity 1.5 14g -2310V £4.10 £3.53Suction 1.4 & 1.8 11g -2300T £4.10 £3.53Suction 1.5 & 2.0 15g -2320W £4.10 £3.53

Feed Size Weight Order Code List OfferType (mm) each STA-259 Price/1Price/1

Gravity 1.4 35g -2220S £10.40 £8.94

Suction 1.4 30g -2200Q £7.46 £6.421.8 30g -2210R £7.46 £6.42

Suction 1.5 25g -2230N £9.90 £8.512.0 25g -2240P £10.40 £8.94

Repair KitIncludes replacement air valve, valve spring,needle spring and O-rings.

Spare Nozzles

Spare Needles

Feed Size Weight Order Code List OfferType (mm) each STA-259 Price/1Price/1

Gravity 1.4 10g -2120M £3.68 £3.16

Suction1.4 15g -2100K £3.68 £3.161.8 16g -2110L £3.68 £3.16

Suction 1.5 15g -2130N £3.68 £3.162.0 15g -2140P £3.68 £3.16

Feed Size Weight Order Code List OfferType (mm) each STA-259 Price/1Price/1Gravity 1.5 50g -2020H £13.80 £11.87

Suction1.4 & 1.8 100g -2000F £8.93 £7.68

1.4 50g -2010G £11.15 £9.59Suction 2.0 50g -2030J £14.50 £12.47

Spare Air Caps

Spare PotsSpare pot for suction feed spray gun. Capacity: 1000cc.Only suitable with Kobe Star spray guns.

Suction Feed Spray GunsStandard/ProfessionalWell balanced with large, responsive triggers, and adjustable width of spray. For horizontal or vertical use with celluloseenamel or acrylic paints etc. Both with 1/4” NPT male fittings.30 - 70psi, 7 - 12CFM. With quick releasealuminium canisters(1000cc). Standardmodel is suitable forapplying base coats.Professionalis suitableforapplyingfinishingcoats.Weight each:1.3kg.

Suction Feed

Sparesavailable

on request

Air Spray GunsFor Industrial and automotive use. Large responsive trigger, adjustablewidth of spray and flow control adjustment.Quick release bayonet fitting canisters. Max operating pressure: 4 - 8 bar.Air consumption:Suction feed: 150 - 250ltr/min.Gravity feed: 100 - 200ltr/min.

Type Nozzle Order Code List Offer(mm) KBE-259 Price/1 Price/1

Suction 1.5 -2100K £33.00 £26.40Gravity 1.5 -2050K £40.19 £32.15

Nozzle Max.Spray Order Code List Offer(mm) Pattern STA-259 Price/1 Price/1

Standard1.4 240mm -1000A £40.85 £35.131.8 280mm -1010B £40.85 £35.13

Professional1.5 255mm -1200D £46.20 £39.732.0 265mm -1210E £44.00 £37.84

Spray Gun Accessories

Gravity Feed Spray Gun

Professional Well balanced with large, responsive triggerand adjustable width of spray. For horizontal or vertical use with celluloseenamel or acrylic paints etc. With 1/4” NPT male fittings. 40 - 60psi,6 - 12CFM.With polypropylenecanister (600cc).Screw top.

Nozzle Max. Spray Weight Order Code List Offer(mm) Pattern each STA-259Price/1 Price/11.4 195mm 1-10kg -1100C £46.20 £39.73

Spare Filter -2060S £0.74 £0.64for STA259-1100C


Abra

sives

& P

ow

er

Tools

Quick Fit FittingsSuitable for vacuum application.Rapid type push on fittings withretaining nut.

2000 Series Threaded Adaptors

QUICK FIT PNEUMATIC FITTINGSGROUP

259

Size Order Code OfferKVL-259 Price/1

1/8” -7000A £0.861/4” -7001B £1.011/2” -7002C £1.683/4” -7003D £2.591” -7004E £5.10


1/8” x 5 -7030A £0.981/4” x 1/8” -7031B £1.091/2” x 1/4” -7032C £1.691/2” x 3/8” -7033D £1.733/4” x 1/2” -7034E £2.72

2030 Series


1/8” x 1/8” -7040A £0.951/4” x 1/8” -7041B £1.101/4” x 1/4” -7042C £1.171/2” x 1/4” -7043D £2.061/2” x 3/8” -7044E £2.071/2” x 1/2” -7045F £1.723/4” x 1/2” -7046G £3.26

2040 Series


1/8” x 5 -7050A £0.921/8” x 1/8” -7051B £0.951/4” x 1/8” -7052C £1.091/4” x 1/4” -7053D £1.131/2” x 1/4” -7054E £1.941/2” x 3/8” -7055F £1.851/2” x 1/2” -7056G £2.23

2050 Series


1/8”x1/8”x22 -7060A £1.061/8”x1/8”x42 -7061B £1.381/4”x1/4”x35 -7062C £1.531/4”x1/4”x51 -7063D £2.00

2070 Series


1/8” x 1/2” -7070A £1.441/8” x 3/8” -7071B £1.091/4” x 3/8” -7072C £1.031/4” x 1/2” -7073D £1.311/2” x 3/4” -7074E £1.931/2” x 1” -7075F £3.653/4” x 1” -7076G £3.61

2080 Series


5mm -7010A £0.801/8” -7011B £0.921/4” -7012C £1.143/8” -7013D £1.311/2” -7014E £1.81

2010 Series

Size Order Code Offer(inch) KVL-259 Price/1

1/4” x 1/8” -7020A £0.933/8” x 1/8” -7021B £1.181/2” x 1/8” -7022C £1.723/8” x 1/4” -7023D £1.771/2” x 1/4” -7024E £1.601/2” x 3/8” -7025F £1.681” x 3/4” -7026G £2.43

3/4” x 1/2” -7027H £4.49

2020 Series


5 x 1/8” -7080A £0.941/4” x 3/8” -7082C £1.111/8” x 1/2” -7083D £1.441/4” x 1/2” -7084E £1.441/2” x 3/4” -7085F £2.34

2090 Series


1/8” x 1/4” -7090A £0.781/2” x 3/4” -7092C £1.363/4” x 1” -7093D £1.97


4.5 x 1/8” -7100A £0.815 x 1/4” -7101B £0.856 x 3/8” -7102C £0.896 x 1/2” -7103D £0.94

2095 Series Thread Adaptors

2096 Series


5mm -7110A £0.901/8” -7111B £1.011/4” -7113C £1.181/2” -7114D £2.163/4” -7115E £3.12


1/8” x 5 -7120A £0.981/4” x 1/8” -7121B £1.191/2” x 1/8” -7122C £1.651/2” x 1/4” -7123D £1.731/2” x 3/8” -7124E £1.951” x 1/2” -7125F £5.35

1/2” x 3/4” -7126G £4.301” x 3/4” -7127H £5.99


1/8” -7131B £0.861/4” -7132C £1.001/2” -7133D £1.553/4” -7134E £1.991” -7135F £3.49


1/8” -7140A £0.831/4” -7141B £0.911/2” -7142C £1.28

3010 Series

3020 Series

3025 Series


1/8” -7150A £0.771/4” -7151B £1.041/2” -7152C £1.69

3030 Series3000 Series

376 CONTRACT PRICES AVAILABLE FOR VOLUME PURCHASES376 CONTRACT PRICES AVAILABLE FOR VOLUME PURCHASES...

Documents

Transcript of 376 CONTRACT PRICES AVAILABLE FOR VOLUME PURCHASES376 CONTRACT PRICES AVAILABLE FOR VOLUME PURCHASES...