352-001 exam questions, Cisco 352-001 study guide

5
Killtest Thanksgiving Day Promotion: From November 18 to December 15, Killtest offers 15% discount on all products. Additionally, there are vouchers for saving more. $5 Vouchers: EhdxgQIX, UDXWU4ZA, M3iHld5j, qavo8fVQ, 10YkjBpF, MAeDX23U, YxOOcvCW, rMkNpvaX, PeFbQmCE, AoEtSqdH $15 Vouchers: NDtBfH4p, RCs7G6PZ, 7RHX7zGa, HJdvSLQ1, PvoNcIsX, 9Wl8HOeT, rTYsNg46, hUCroEL5, j48wOtHD, O75oIgQg Killtest Cisco 352-001 Practice Exam Cisco Certified Design Expert Qualification Exam http://www.killtest.com/CCDE/352-001.asp If you prepare for the 352-001 test using Killtest 352-001 exam questions, Cisco 352-001 study guide, we guarantee your success in the first attempt. Cisco 352-001 study materials provide you everything you will need to take your 352-001 test. Killtest 352-001 exam questions and answers will provide you with 352-001 Questions and answers that reflect the actual 352-001 exam. Furthermore, we are constantly updating 352-001 Cisco questions and answers. www.killtest.com

description

If you prepare for the 352-001 test using Killtest 352-001 exam questions, Cisco 352-001 study guide, we guarantee your success in the first attempt. Cisco 352-001 study materials provide you everything you will need to take your 352-001 exam. The 352-001 Questions and answers are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. 352-001 exam questions, Cisco 352-001 study guide will help you pass test in your first try, and also save your valuable time.

Transcript of 352-001 exam questions, Cisco 352-001 study guide

Page 1: 352-001 exam questions, Cisco 352-001 study guide

Killtest Thanksgiving Day Promotion: From November 18 to December 15, Killtest offers 15%

discount on all products. Additionally, there are vouchers for saving more.

$5 Vouchers: EhdxgQIX, UDXWU4ZA, M3iHld5j, qavo8fVQ, 10YkjBpF, MAeDX23U, YxOOcvCW,

rMkNpvaX, PeFbQmCE, AoEtSqdH

$15 Vouchers: NDtBfH4p, RCs7G6PZ, 7RHX7zGa, HJdvSLQ1, PvoNcIsX, 9Wl8HOeT, rTYsNg46,

hUCroEL5, j48wOtHD, O75oIgQg

Killtest Cisco 352-001 Practice Exam

Cisco Certified Design Expert Qualification Exam

http://www.killtest.com/CCDE/352-001.asp

If you prepare for the 352-001 test using Killtest 352-001 exam questions, Cisco 352-001 study

guide, we guarantee your success in the first attempt. Cisco 352-001 study materials provide

you everything you will need to take your 352-001 test. Killtest 352-001 exam questions and

answers will provide you with 352-001 Questions and answers that reflect the actual 352-001

exam. Furthermore, we are constantly updating 352-001 Cisco questions and answers.

www.killtest.com

Page 2: 352-001 exam questions, Cisco 352-001 study guide

www.killte

st.co

m

The safer , easier way to help you pass any IT exams. 

1 / 3

Exam : 352-001

Title :

Version : Demo

CCDE™ Written Exam

Page 3: 352-001 exam questions, Cisco 352-001 study guide

www.killte

st.co

m

The safer , easier way to help you pass any IT exams. 

2 / 3

1.A company plans to include Nonstop Forwarding and Bidirectional Forwarding Detection as a part of

their network redundancy plan.

In which two ways do NSF and BFD work together when different hardware platforms are compared?

(Choose two.)

A. During supervisor engine or routing engine failover, the NSF feature will always ensure that the BFD at

the peer router will not trigger a link down independent of the used hardware platform.

B. At some hardware platforms, BFD and NSF are not supported together. During supervisor engine or

routing engine failover, the BFD at the peer router will trigger a link down.

C. To ensure that BFD at the peer router will not trigger a link down during NSF, the BFD packets must be

processed fast enough, and, during supervisor engine or routing engine failover, by processing the BFD

independent from the supervisor engine or routing engine.

D. Because BFD is always processed at the line cards (not at the supervisor engine or routing engine), a

supervisor engine or routing engine failover will not affect the BFD peer router.

E. Because BFD is always processed at the supervisor engine or routing engine, a supervisor engine or

routing engine failover will always trigger a link down at the peer router.

Answer: B,C

2.Refer to the exhibit.

A service provider would like to use Ethernet OAM to detect end-to-end connectivity failures between

SP-SW1 and SP-SW2.

In which two of these ways can you design this solution? (Choose two.)

A. Enable Y.1731 Connectivity Fault Management on the SP switches.

B. E-LMI PDUs must be forwarded over VPLS.

C. Cisco Discovery Protocol PDUs must be forwarded over the VPLS.

D. Use upward maintenance endpoints on the SP switches.

E. Enable IEEE 802.1ag Connectivity Fault Management on the SP switches.

Answer: D,E

3.A network design shows two routers directly connected to an Ethernet switch using optical connections.

There is an OSPF adjacency between the routers.

In this design, which solution will ensure that interface down detection is reported as quickly as possible to

the IGP?

A. optimized OSPF SPF timers

B. Bidirectional Forwarding Detection

C. automatic protection switching

D. optimized OSPF LSA timers

Page 4: 352-001 exam questions, Cisco 352-001 study guide

www.killte

st.co

m

The safer , easier way to help you pass any IT exams. 

3 / 3

E. Ethernet OAM CFM monitoring

Answer: B

4.A network designer is working with a company to improve convergence at the Layer 2 control plane and

decides to use LACP.

Which of these components does LACP use to create the system ID?

A. LACP system priority and switch MAC address

B. LACP port priority and switch MAC address

C. LACP port priority and port number

D. LACP system priority and port number

Answer: A

5.Refer to the exhibit.

You are designing a spanning-tree network for a small campus.

Which two of these options would result in a trouble-free spanning-tree network design? (Choose two.)

A. Convert all ports to trunk ports, prune off the VLANs that you do not require, and minimize the number

of blocking ports.

B. Introduce Layer 3 VLANs (SVIs) and prune off the VLANs that you do not require.

C. Convert all the ports to trunk and enable BackboneFast.

D. Convert all the ports to trunk and enable UplinkFast between all the links.

Answer: A,B

Page 5: 352-001 exam questions, Cisco 352-001 study guide

www.killte

st.co

m

www.killtest.com

Killtest Exams Features:

High quality IT exams practice questions and answers

Hot Certifications: IBM, CompTIA, Avaya, Symantec, Oracle, Adobe

One year free update

Verified Answers Researched by Industry Experts and almost correct.

Multiple-choice questions (MCQs) like real exam

At least 96% coverage of real exam

Experts using industry experience to produce precise and logical products

If failed, 100% money back

More Hot Pages from Killtest shared:

Promotion Page:

http://www.killtest.com/promotion.asp

Bundles Page”

http://www.killtest.com/bundles.asp

How To Pay Page:

http://www.killtest.com/howtopay.asp

FAQs Page

http://www.killtest.com/faq.asp

All Certifications Exams:

IBM CompTIA ISEB SCO Avaya Symantec Checkpoint

CIW EXIN EC-COUNCIL Juniper Network Appliance

Oracle VMware EMC LPI Novell Nortel Hitachi

Adobe OMG

www.killtest.com