8/14/2019 348 _JBM_

1/6

1

Ref. No. : KE/Q348/JBM/11-12 Date : 31.10.201328.10.201308.08.201310.02.2012

M/s JBM IndustriesPlot No. 269, Sector-24Faridabad

Kind Attn.: Mr. O.P. Verma

Subject : Your requirement Liquid Painting Plant - Conveyorized(Diesel Fired).

Sir,

With reference to our discussion held with your goodself regarding

Conveyorized Liquid Painting Plant (Diesel Fired). In this connection, we thank

you for the interest expressed in our equipment. We are pleased to submit our

most competitive offer for the items, in line with our discussions.

Meanwhile we are pleased to introduce ourselves as manufacturers ofspecially designed systems for :

Powder Coating.

Paint Shop Equipment.

Complete Conveyorised lines.

The Range of our system / Equipment includes :

Spray Liquid painting line with Batch type and conveyorised lines withmanual and automatic applications consisting of Dip and SprayPhosphating Plants, Spray Painting Booth, Flash off Zones, With or Wihtoutpressurisation.

Powder Coating Lines Batch type or conveyorized lines with manual andAuto application.

Powder Coating Equipment.

Powder recovery, sieving and recycling systems.

8/14/2019 348 _JBM_

2/6

8/14/2019 348 _JBM_

3/6

3

TECHNICAL BID SYNOPSIS

Input Data

Application : L.P. Gas Cylinder

Quantity of Articles : 800 pcs. / 8 Hours

Size of each component : 800 x 350 dia approx.

Jigging arrangement : Manual on hanging on conveyor overhead

automatic line.

Painting Process : Primer and Final Enamel Paint.

TECHNICAL BID OVENS (DIESEL FIRED)

PRIMER & PAINT BAKING OVEN

Convection heating is most commonly used for water drying, putty / paint / powder

baking. Hot air is blown over the article surface hereby heating it. This air now

cooled is drawn by the circulating blowers over the heat source. The air thus

reheated is passed into the hot air ducts and let into the oven through air louvers.

The oven is fabricated out of insulated panels in a modular cassetee form. These

cassettes are supported internally and externally by structural frame work. The

oven is designed and fabricated to ensure minimal heat loss due to conduction

convection and radiation.

The Diesel Fired Exchanger as the heat source.

Hot Air Generator:

The Diesel Fired Hot Air Generator mainly consists of :

a) Combustion chamber being the first pass, fabricated out of 3mm thickcylindrical shell from SS-304.

b) Transfer box the second pass guiding the flue gasses from the combustionchamber into pipes is fabricated out of SS-304 2mm thick material.

c) The 3rdand 4thpass is made out of SS pipes 2.5mm thick.

8/14/2019 348 _JBM_

4/6

8/14/2019 348 _JBM_

5/6

5

SCOPE OF SUPPLY :-

1. Oven tunnel from two walled insulated panels joined

airtight in a modular design.

: 1 No.

2. Sturdy Supporting Structure from meta section tosupport the insulated panels.

: 1 set

3. Circulation air duct : 4 sets

4. Air louvers to distribute the hot air : 4 sets

5. Hot Air Generator with HSD fired burner & SS heatexchanger

: 4 Set

6. Hot air circulation Blower consisting of dynamicallybalanced radial impeller and non-flame proof typemotor.

: 4 Nos.

7. Temperature Sensor and Controller to control burneroperation.

: 1 set

8. Control Panel and Cabling upto user equipments : 1 set

EXCLUSION

1. All civil work, if any kind.

2. Incoming Electrical Connection upto Motor.

3. Exhaust Smoke duct for exchanger.

******

8/14/2019 348 _JBM_

6/6

6

PRICE AND COMMERCIAL TERMS

Sr. No. Descrip tion Amount

1. Conveyorized Liquid Paint Baking Oven (Diesel Fired) with

male / female cassettes CAMEL BACK1855000.00

3. Oven Structure 16000 x 9500 x 3600

4. 4 wheel Conveyor 10 Pitch (Track Chain Sprokit 125 mtr.)

5. Conveyor Drive with Caterpillar & Structure

6. Flash of Zone with 8 Mtr. with exhaust blour 3 HP (4 Nos.)

8. Conveyor Structure

9. Material handling hanger (380 pcs.)

Total 1855000.00

Erection and Commissioning @ 5% on basic price will be

charge extra.

92750.00

TERMS & CONDITIONS :

Delivery : With in 50 to 60 days.

Payment : 40% Advance alongwith confirmed Purchase Order

50% + Tax at the time of final inspection at our plant.

10% successful commissioning.

Sales Tax : VAT @ 5%

Excise Duty : @ 12.3% shall be charged extra.

Transportation : Customers Scope

For Khushbu Enterprises

Auth. Signatory7838677417, 9899123718