32hl67u Svm

7/22/2019 32hl67u Svm

1/31

SERVICE MANUAL

LCD Color Television

32HL67U Rev.1

This model is classified as a green product (*1), as indicated by the underlined serial number.

This Service Manual describes replacement parts for the green product. When repairing thisgreen product, use the part(s) described in this manual and lead-free solder(*2).

For (*1) and (*2), refer to GREEN PRODUCT PROCUREMENT andLEAD-FREE

SOLDER.

TOSHIBA CORPORATION 2009

For Technical Bulletins, Technical Tips, or other information regarding the

service of this model, visit the Toshiba America Consumer Products National

Service Division website at:

www7.toshiba.com
http://www7.toshiba.com/http://www7.toshiba.com/

7/22/2019 32hl67u Svm

2/31

IMPORTANT NOTICE

WARNING: Do not modify or alter the information or data provided herein without prior written consent by Toshiba.Toshiba shall not be liable to anybody for any damages, losses, expenses or costs, if any, incurred in connection with oras a result of such modification or alteration.

THE INFORMATION OR DATA HEREIN SHALL BE PROVIDED "AS IS" WITHOUT ANY WARRANTY OF ANY KIND, EITHEREXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Toshiba shall not be liable for any damages, losses, expenses or costs, if any, incurred in connection with or as a result ofuse of any information or data provided herein.

GREEN PRODUCT PROCUREMENT

The EC is actively promoting the WEEE & RoHS Directives that define standards for recycling and reuse of Waste Electrical andElectronic Equipment and for the Restriction of the use of certain Hazardous Substances. From July 1, 2006, the RoHS Directive willprohibit any marketing of new products containing the restricted substances.

Increasing attention is given to issues related to the global environmental. Toshiba Corporation recognizes environmental protectionas a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. Inline with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials thathave low environmental impacts.

Green procurement of parts is not only confined to manufacture. The same green parts used in manufacture must also be used asreplacement parts.

LEAD-FREE SOLDER

WARNING:This product is manufactured using lead-free solder as a part of a movement within the consumer products industry atlarge to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product.

The melting temperature of lead-free solder is higher than that of leaded solder by 86F to 104F (30C to 40C). Use of a solderingiron designed for lead-based solders to repair product made with lead-free solder may result in damage to the component and orPCB being soldered. Great care should be made to ensure high-quality soldering when servicing this product especially whensoldering large components, through-hole pins, and on PCBs as the level of heat required to melt lead-free solder is high.

SAFETY INSTRUCTION

WARNING:Before servicing this chassis, read the "Safety Precaution" and "Product Safety Notice" instructions below.

Safety Precaution

WARNING:Servicing should not be attempted by anyone unfamiliar with the necessary precautions on this receiver. The followingare the necessary precautions to be observed before servicing this chassis.

1. An isolation transformer should be connected in the power line between the receiver and the AC line before any service isperformed on the receiver.

2. Always disconnect the power plug before any disassembling of the product. It may result in electrical shock.

3. When replacing a chassis in the cabinet, always be certain that all the protective devices are put back in place, such as

nonmetallic control knobs, insulating covers, shields, isolation resistor-capacitor network, etc.

4. Always keep tools, product components, etc. away from children as these items may cause injury.

5. Depending on the model, use an isolation transformer or wear suitable gloves when servicing with the power on.Disconnect the power plug to avoid electrical shock when replacing parts. In some cases, alternating current is alsoimpressed in the chassis, so electrical shock is possible if the chassis is contacted with the power on.

6. Always use the replacement parts specified for the particular model when making repairs. The parts used in productsrequire special safety characteristics such as inflammability; voltage resistance, etc. therefore, use only replacement parts

1

7/22/2019 32hl67u Svm

3/31

that have these same characteristics. Use only the specified parts when the mark is indicated in the circuit diagram orparts list.

7. Part mounting and wire routing should be the same as that used originally. For safety purposes, insulating materials such asisolation tubes or tape are sometimes used and printed circuit boards are sometimes mounted floating. Also make sure thatwiring is routed and clamped to avoid parts that generate heat or use high voltage. Always follow the manufactures wiringroutes / dressings.

8. Always ensure that all internal wirings are in accordance before re-assembling the external casing after a repair iscompleted. Do not allow internal wiring to be pinched by cabinets, panels, etc. Any error in reassembly or wiring can resultin electrical leakage, flame, etc., and may be hazardous.

9. NEVER remodel the product in any way. Remodeling can result in improper operation, malfunction, electrical leakage, orflame, which may be hazardous.

10. Always perform an AC leakage current check on the exposed metallic parts of the cabinet such as antennas, terminals,screw heads, metal overlays, control shafts, etc. to be sure that the set is safe to operate without any danger of electricalshock before returning the set to the customer.

11. To check leakage current: (After completing the work, measure the leakage current to prevent an electrical shock.)

Plug the AC line cord directly into a 120V AC outlet. Do not use an isolation transformer for this check.

Use an AC voltmeter having 5000 ohms per volt or more sensitivity in the following manner.

Connect a 1500 ohm 10 watt resistor, paralleled by a 0.15 F, AC type capacitor, between a known good earth ground (water pipe,conduit, etc.) and the exposed metallic parts, one at a time. Measure the AC voltage across the combination of 1500 ohm resistorand 0.15 F capacitor. Reverse the AC plug at the AC outlet and repeat AC voltage measurements for each exposed metallic part.Voltage measured must not exceed 0.3 volts rms. This corresponds to 0.2 milliamps AC. Any value exceeding this limit constitutes apotential shock hazard and must be corrected immediately.

Product Safety Notice

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are often

overlooked in a visual inspection. The protection afforded by them cannot necessarily be obtained by using replacement

components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified

in this manual and its supplements. Electrical components having such features are identified by the international hazard symbols

on the schematic diagram and the parts list. Before replacing any of these components, read the parts list in this manual carefully.

The use of substitute replacement parts which do not have the same safety as specified in the parts list may create electrical shock,

fire, or other hazards.

SAFETY INSTRUCTION

WARNING:The metal edges of the LCD module are sharp, handle it with care.

The LCD module can easily be damaged during disassembly or reassembly; therefore, always observe the following precautionswhen handling the module.

1. In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in, drink, or touch this fluid. Suchactions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water. If the

2

7/22/2019 32hl67u Svm

4/31

fluid should contact the skin or clothing, wipe off with alcohol, etc., and rinse thoroughly with water. If the fluid should enterthe eyes, immediately rinse the eyes thoroughly with running water.

2. When attaching the LCD module to the LCD cover, position it appropriately and fasten at the position where the display canbe viewed most conveniently.

3. Carefully align the holes at all four corners of the LCD module with the corresponding holes in the LCD cover and fastenwith screws. Do not strongly push on the module because any impact can adversely affect the performance. Also usecaution when handling the polarized screen because it can easily be damaged.

4. If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on thesurface and then wipe again. If the panel surface is extremely soiled, wipe the panel surface with CRT cleaner sprayedonto the cloth. Do not spray the cleaner on the panel. Pay attention not to scratch the panel surface.

5. Leaving water or other fluids on the panel for an extended period of time can result in discoloration or stripes. Immediatelyremove any type of fluid from the screen.

6. Glass is used in the panel construction. Damage can occur if dropped or struck with hard objects.

3

7/22/2019 32hl67u Svm

5/31

7. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static electricity. When handling the module, use awrist ground or anchor ground.

8. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for extended periods.

9. Do not store the LCD module below the temperature conditions described in the specifications. Doing so could result infreezing of the liquid crystal, loss of resilience, or other damage.

10. Do not disassemble the LCD module. Such actions could result in improper operation.

11. When transporting the LCD module, do not use packing containing epoxy resin (amine) or silicon resin (alcohol or oxim).The gas generated by these materials can cause loss of polarity.

4

7/22/2019 32hl67u Svm

6/31

Entering Service Mode

1. Set VOLUME to minimum and press MUTE button twice on the remotecontrol.

2. Press MUTE button again and hold button down.

Service Mode display

3. While holding the MUTE button, press MENU button on TV set.

Selecting the Adjusting Item

Every pressing of CH or button in the service mode changes the adjustment items.

Adjusting the Data

Pressing of VOLUME or button will change the value of data in the range from 00H to FFH. The variable range depends onthe adjusting item.

Exiting Service Mode

Press the POWER button once to turn off the TV.5

7/22/2019 32hl67u Svm

7/31

LV67

YELLOW GREEN

MODE LED LED

POWER OFF

POWER OFF (Standby

POWER ONDisk in the disk slot

Fan Stop Detection Blinking

IIC BUS Error Slow Blinking

Power Protection Detection Fast Blinking

Booting 3 Blinks

Upgrade in progress

Upgrade successful

Upgrade failed

LED Indication

The yellow, blue and red/green LED lights on the TV (at the bottom center of the TV)

indicate the TV's status, as described below:

Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is

unplugged), when power is restored, the yellow LED will blink while the TV is booting

until the remote control is usable. This is normal and is not a sign of malfunction.

6

7/22/2019 32hl67u Svm

8/31

A

Sound

IsSound Missing or

Distorted?

MissingDistorted

Is MissingSound Analog

or Digital?

IsDistorted Sound

Analog or Digital?

Analog DigitalDigital

Replace AnalogSignal Processing

Section.

Replace Digital Signal

Processing Section, then

suspect Analog.

Questions or Statements in flow chartpertain to only the defined areas. It isassumed that all other inputs and

functions operate correctly.

Reconfirmproper

operation of all

analog audiosources.

Cable Card is a function of DigitalSignal Processing Area

Analog Processing includes:

Composite Video/Audio

S-Video/AudioNTSC Tuner Video/Audio

Digital Audio after Digital Processing

Color stream Video/Audio

DVI/Computer Audio In

Digital Processing includes:

RGB Computer Video

HDMI

ATSC (8Vsb) HDTuner Signals

Ethernet

7

7/22/2019 32hl67u Svm

9/31

B

Picture

Is

the PictureMissing orDistorted?

MissingDistorted

Is theMissing

Picture Analog orDigital?

Is DistortedPicture Analog or

Digital?

Analog DigitalDigital

Replace Analog Signal

Processing Section, thensuspect Digital.

Replace DigitalSignal Processing

Section.

Replace DigitalSignal

Processing

Section.









RGB Computer Video

HDMI


Ethernet

Questions or Statements in flow chartpertain to only the defined areas. It isassumed that all other inputs and

functions operate correctly.

8

7/22/2019 32hl67u Svm

10/31

Dead

C

Areany LEDs

Blinking on thefront of the

unit?

No Yes

Suspect Power Supply,

Low B Supply Then

Suspect system Control(SYSCON).

Use Blink Codes tohelp determine

problem area.









RGB Computer Video

HDMI


Ethernet

Questions or Statements in flow chartpertain to only the defined areas. It isassumed that all other inputs andfunctions operate correctly.

9

7/22/2019 32hl67u Svm

11/31

N

Does3VDC appear at pin 3

of P806A when on-off ispressed?

No

YesIs

5VDC present at pin 1of P806A when the unit

is plugged in?

No

Is18 VDC present at pin 7of P806A when the unit

is plugged in?

NoYes

Suspect the

Low B supply

circuit.

Is5VDC present at pin 13of P811A with the unit

plugged in?

NoYes

Suspect the

supply, then th

power supply

Suspect the

system

control

(SYSCON)

circuit.

Yes

Suspect the

main power

supply circuit.

Dead set Nosound or picture

10

7/22/2019 32hl67u Svm

12/31

No

Does3 VDC appear at pin 3of P806A when on-off

is pressed?

No

YesIs

5VDC present at pin 1of P806A when the unit

is plugged in?

No

Suspect the

Low B supply

circuit.

Is5VDC present at pin 13of P811A with the unit

plugged in?

NoYes

Suspect the m

power supply, th

Low B supply c

Suspect the

system

control

(SYSCON)

circuit.

Yes

Suspect the

main power

supply

circuit.

Dead set nosound or picture

11

7/22/2019 32hl67u Svm

13/31

Is the problemassociated with ananalog or digital

input?

Analog Digital

Is the on screen displaynormal?

NOYES

powdiag

voltaC

YES

Suspect the

Seine (Digital)

module.Using

the powerdistribution diagram,

are the voltages normalat P811A and

P811B?

Suspect the AV tuning module.

This can be confirmed by using thewiring interconnect diagram andchecking the Y, Pb, Pr signals at

plug CN72A.

YES

Suspect the

Low B

module.

NO

No or distortedvideo

Doesthe back light functionnormally when the unit

is turned on?

YESNOIs

the screen discoloredor does it have streaksor dark areas with no

signal input?

NO

Replace the

LCD display

panel.

YES

12

7/22/2019 32hl67u Svm

14/31

Does the back light

function and then turnoff?

NO

Is24 VDC present

at pins 1 and 5 of P804when the unit is

turnedon?

YESNO

Replace the

Main Power

supply.Is

6VDC present at pin 8of CN91A when the unit

is turned on?

NO

Replace the

Low B power

supply.

Is3.3 VDC present atpin 7 of P812A shortlyafter the unit is turned

on?

YES

Replace the

SYSCON

section.

NO

13

7/22/2019 32hl67u Svm

15/31

Isproblem associatedwith analog or digital

inputs?

NO

AnalogDigital

Using distribut

are the voat P8

P8

Suspect the

Low B

module.

Usingthe power

distribution diagram, arethe voltages normal at

CN90A andCN91B?

NOYES

Suspect the digital module. This

can be confirmed by using the wiringinterconnect diagram and an oscilloscope

and checking the right and left audiosignals at CN71.

No or distortedAudio

14

7/22/2019 32hl67u Svm

16/31

Does the back lightfunction and then turn

off?

YESNO

Isthe back light

supply source presentshortly after the power

switch is pressed?(24V-Pins 1-5

CN804)

YESNO

Suspect theback light

supply source.

Is the backlight switching

signal (3VDC Pin 1-CN61) present shortlyafter the power switch

is pressed?

YES

SuspectSystem

Control or

Low-B supplyproblems.

NO

If it is available , try theCCFL inverter. If this doesnot help, replace the LCD

display. ***

*** Warranty Concessionrequired for LCD panelreplacement. Digital photomay be requested.Contact TechnicalSupport.

Doesthe screen light

unevenly? (Normalscreen with a shaded

area)

NO

Thisnormally

indicates adefective CCFL(Lamp). Thedisplay shouldbe replaced.

***

Using

a scope or frequencycounter, is the CCFLinverter operating?

Suspect theCCFL inverter.

NO YES

Operation of the inverter can

be determined by placing a

scope probe or frequency

counter test lead NEAR the

inverter. If the inverter is

operating, the operating

frequency (40 to 70 Khz) or

waveform pictured below will

be displayed.

Do not connect the

test leads directly to

the inverter!

YES

15

7/22/2019 32hl67u Svm

17/31

2007 LCD Software Upgrade Process

1. Place the unit face down on a soft surface. Remove the Service Port Access Cover byremoving the Phillips screw marked with an arrow in the photo.

2. Place set upright and apply AC. Turn the uniton and insert the SD update card in the card slot.The card will only fit as shown.

3. The screen shown above will appear. Usingthe customer remote, highlight OK by pressingthe right arrow button. Then press Enter.

4. The screen shown above will appear and theblue bar at the bottom will move from left toright.

5. When this screen appears, DO NOT PRESSENTER! Remove AC, remove the card, then reapplAC.16

7/22/2019 32hl67u Svm

18/31

U03C LED

U03A TN-AV

U02A LOW-B

U03D

KEY

U03B

Front-AV

U04A

SIGNAL

17

7/22/2019 32hl67u Svm

19/31

18

7/22/2019 32hl67u Svm

20/31

19

7/22/2019 32hl67u Svm

21/31

20

7/22/2019 32hl67u Svm

22/31

21

7/22/2019 32hl67u Svm

23/31

22

7/22/2019 32hl67u Svm

24/31

Stand Exploded View

A425 A426 A427 A428 A429

23

7/22/2019 32hl67u Svm

25/31

ReplacementPartsList

Location Part No. Descripti on

A201 75006095 FRONTBEZELASSY

A320 75005734 PIECE,CTRLSASSY

A401 75006094 BACKCOVERASSY

A420 75006546 STANDKIT,FIXBB

A425 75006746 STANDPART,FIXBKTASSY

A426 75007235 STAND,BASEASSYFIXBB

A429 75007210 STAND,WRENCH

B001 75006932 LCDPANEL,

G6SEC32L06,

LTA320WT

L06

C801 76503510 CAPACITOR,PLASTICFILM,LE224C

C802 76503510 CAPACITOR,PLASTICFILM,LE224C

C803 76168103 CAPACITOR,PLASTICFILM,400V0.22UFJ

C804 76214103 CAPACITOR,CERAMICDISC,500VB0.01UFK

C805 76092281 CAPACITOR,CERAMICDISC,AC250VE4700PF

C806 76092281 CAPACITOR,CERAMICDISC,AC250VE4700PF

C810 76125037 CAPACITOR,ELECTROLYTIC,200V1200UFM

C811 76092569 CAPACITOR,CERAMICDISC,AC250VE2200PFM

C812 76092569 CAPACITOR,CERAMICDISC,AC250VE2200PFM

C813 76092616 CAPACITOR,CERAMICCHIP,16VB0.33UFK

C815 75005709 CAPACITOR,CHIPCERA,50VB0.47UFK,GRM21BB31H474KA87L

C816 76073183 CAPACITOR,ELECTROLYTIC,

35V

220UF

M


C819 76105101 CAPACITOR,CERAMICCHIP,50VCH100PFJ


C821 76092343 CAPACITOR,CERAMICDISC,2KV680PFK

C822 76092344 CAPACITOR,CERAMICDISC,2KV820PFK

C823 76092341 CAPACITOR,CERAMICDISC,2KVR470PFK

C824 76109102 CAPACITOR,CERAMICCHIP,50VB1000PFK

C825 75004442 CAPACITOR,CERAMICCHIP,50VB1UFK

C826 76092341 CAPACITOR,CERAMICDISC,2KVR470PFK

C827 76678229 CAPACITOR,ELECTROLYTIC,200V2.2UFM

C851 76092538 CAPACITOR,CERAMICCHIP,10VF1UFZ







CE04 76092281 CAPACITOR,CERAMICDISC,AC250VE4700PF

CE05 76092281 CAPACITOR,CERAMICDISC,AC250VE4700PF

CE07 75005709 CAPACITOR,CHIPCERA,50VB0.47UFK,GRM21BB31H474KA87L

CE09 76668339 CAPACITOR,ELECTROLYTIC,35V3.3UFM

CE10 76073217 CAPACITOR,ELECTROLYTIC,200V560UFM

CE12 76092883 CAPACITOR,CERAMICCHIP,50VB0.1UFK

CE13 76092569 CAPACITOR,CERAMICDISC,AC250VE2200PFM

CE14 76092569 CAPACITOR,CERAMIC

DISC,

AC250V

E2200PF

M

CE15 76092337 CAPACITOR,CERAMICDISC,2KV220PFK


CE17 76092339 CAPACITOR,CERAMICDISC,2KV330PFK

CE18 76503253 CAPACITOR,PLASTICFILM,1250VH0.01UFH

CE23 76109471 CAPACITOR,CERAMICCHIP,50VB470PFK





24

7/22/2019 32hl67u Svm

26/31





CE48 75004442 CAPACITOR,CERAMICCHIP,50VB1UFK

CE49 76109471 CAPACITOR,CERAMICCHIP,50VB470PFK





CE75 76073128 CAPACITOR,ELECTROLYTIC,6.3V1000UFM






CE90 75005708 CAPACITOR,CHIPCERA,50VB0.33UFK,C2012JB1H334KT





CE97 76073181 CAPACITOR,ELECTROLYTIC,

35V

56UF

M

CN90A 23713756 PLUG,5P2.5MMG,B5BEHF1TV4

CN91A 23713760 PLUG,NP2.5MMG,B9BEHF1A

D801 23362200 DIODE,D5SB60,7009F07

D805 23357850 DIODE,ZENER,MTZJ9.1A

D806 23357893 DIODE,ZENER,MTZJ27C



D811 23357511 DIODE,AG01A

D812 23357852 DIODE,ZENER,MTZJ9.1C

D813 23357512 DIODE,AL01Z

D852 23362268 DIODE,1SS133B/P

D860 23357515 DIODE,RK34

D861 23357703 DIODE,1SS355



D883 75001877 DIODE,FMEN220A

D884 75001877 DIODE,FMEN220A

D885 23357512 DIODE,AL01Z

D886 23357512 DIODE,AL01Z

D899 76019489 VARISTOR,V1=470V2750A/2

DE01 23362204 DIODE,D3SB60,7109F08

DE02 23357511 DIODE,AG01A

DE03 23357511 DIODE,AG01A

DE05 23357104 DIODE,1SS244

DE06 23357366 DIODE,FR105

B5

DE07 23357900 DIODE,ZENER,MTZJ33B

DE09 23357842 DIODE,ZENER,MTZJ6.8B

DE11 23357709 DIODE,RU1P

DE12 23357512 DIODE,AL01Z






25

7/22/2019 32hl67u Svm

27/31




DE51 75006846 DIODE,D1NS45070

DE52 23357703 DIODE,1SS355


DE54 23357703 DIODE,1SS355

DE55 23357748 DIODE,ZENER,MA8062M

DE56 23362133 DIODE,ZENER,UDZS30B



DE72 23357366 DIODE,FR105B5

DE73 23362197 DIODE,SCHOTTKY,RB085T60

DE75 23357408 DIODE,FMX12S(023108)

DE77 23357408 DIODE,FMX12S(023108)

DE90 23357866 DIODE,ZENER,MTZJ12C




F801 23144319 FUSE,CARTRIDGE5.2X20,125V8A

F801A 23165433 FUSEHOLDER,5.2

F801B 23165433 FUSEHOLDER,

5.2



FE01 23144715 FUSE,CARTRIDGE5.2X20,125V5A

FE72 23144708 FUSE,AXIAL,125V1A



FE75 75005791 FUSE,RADIAL,5RT5A

GR12 76000576 CHIPJUMPER,3216TYPE




K902 75005729 REMOCONHANDUNIT,CT90275

L801 23217834 TRANSFORMER,CHOKE,TPW2078AS

L802 23217792 TRANSFORMER,CHOKE,TPW2072AS

L804 23103304 FERRITECHOKE,TEM2011AA

L806 23248386 COIL,CHOKE,TLN3481AA

L807 23248386 COIL,CHOKE,TLN3481AA

L874 23103302 FERRITECHOKE,TEM2011AH




L883 75005790 COIL,CHOKE,1.5MMHM14A,LB1R5HA

LE06 23248386 COIL,CHOKE,TLN3481AA

LE07 23248386 COIL,CHOKE,TLN3481AA

LE11 23103302 FERRITECHOKE,

TEM2011AH

LE12 23103330 FERRITECHOKE,3.5X5X2,TEM2014AH

LE52 23289040 COIL,PEAKING,TRF4229AU

LE53 23289983 COIL,PEAKING,TRF4101AZ

LE54 23289049 COIL,PEAKING,TRF4330AU

LE72 23248417 COIL,CHOKE,TLN3481AH



MZ01 75005836 WIREHARNESS,LVDS,V90A00011900

P800 23713702 PLUG,2P11.88MMWVT

26

7/22/2019 32hl67u Svm

28/31



P801 75002678 POWERCORD,INQ2682(1)

P803A 23713757 PLUG,6P2.5MMG,B6BEHF1TV4

P803B 23713757 PLUG,6P2.5MMG,B6BEHF1TV4

P804 23713942 CONNECTOR,10P,B10BPHKS(LF)

P805 23713942 CONNECTOR,10P,B10BPHKS(LF)

P806A 23713759 PLUG,8P2.5MMG,B8BEHF1TV4

P806B 23713759 PLUG,8P2.5MMG,B8BEHF1TV4

P811A 23713816 SOCKET,127301113K2

P812A 23713817 SOCKET,127301115K2

PG02 23165495 EARTHTERMINAL,MET310332



PP08 23974994 BAND,KESSOKU

Q801 75001933 IC,STRZ4517

Q826 23000823 IC,PHOTOCOUPLER,TLP421F(GR)

Q851 23205463 TRANSISTOR,2SC2712Y(TE85L,F)

Q852 23205463 TRANSISTOR,2SC2712Y(TE85L,F)

Q853 23205443 TRANSISTOR,2SA1162Y(F)

Q854 23205358 TRANSISTOR,KTC3875SY/P

Q855 23205358 TRANSISTOR,KTC3875S

Y/P

Q856 23205327 TRANSISTOR,RN1406(F)

Q860 23205292 TRANSISTOR,2SD2396

Q883 23135091 IC,SE024N

QE01 23135089 IC,STRW6756

QE26 23000823 IC,PHOTOCOUPLER,TLP421F GR

QE40 75005723 IC,MP1591DSLFZ

QE52 75005726 IC,PQ070XF01SZH

QE53 23205330 TRANSISTOR,RN1403(F)

QE54 23205567 TRANSISTOR,RN2403(TE85L,F)

QE64 23085415 IC,BD4746G

QE65 23085415 IC,BD4746G


QE71 75001881 IC,CE1059

QE73 75005727 IC,MPD6S020


QE82 23205358 TRANSISTOR,KTC3875SY/P

QE83 23085587 IC,TA76431S

QE90 23085423 IC,KIA7809APIU/P


QE93 75001876 TRANSISTOR,TPC8111(TE12L,Q)


QE96 75001876 TRANSISTOR,TPC8111(TE12L,Q)

QE97 23205569 TRANSISTOR,2SC2713GR(TE85L,F

QE98 23205568 TRANSISTOR,2SA1163GR(TE85L,F

R801 76004716 RESISTOR,METAL

GLAZE,

1/2W

2.2M

OHM

J

R803 76366182 RESISTOR,CARBONFILM,1/6W1.8KOHMJ

R805 76011102 RESISTOR,CHIP,1/20W1KOHMJ

R806 76552101 RESISTOR,OXIDEMETALFILM,1/2W100OHMJ

R807 76366153 RESISTOR,CARBONFILM,1/6W15KOHMJ


R809 76321689 RESISTOR,OXIDEMETALFILM,1/2W6.8OHMJ


R813 76366120 RESISTOR,CARBONFILM,1/6W12OHMJ


27

7/22/2019 32hl67u Svm

29/31




R816 76011331 RESISTOR,CHIP,1/20W330OHMJ

R817 76382823 RESISTOR,OXIDEMETALFILM,1W82KOHMJ

R821 76553680 RESISTOR,OXIDEMETALFILM,1W68OHMJ

R827 76554103 RESISTOR,OXIDEMETALFILM,2W10KOHMJ














R866 76553152 RESISTOR,OXIDEMETALFILM,1W1.5KOHMJ

R869 76011472 RESISTOR,CHIP,

1/20W

4.7K

OHM

J

R873 76871152 RESISTOR,CHIP,1/8W1.5KOHMJ

R874 76000445 CHIPJUMPER,1608TYPE


R899 76004718 RESISTOR,METALGLAZE,1/2W8.2MOHMJ

RE03 76382683 RESISTOR,OXIDEMETALFILM,1W68KOHMJ

RE05 76554683 RESISTOR,OXIDEMETALFILM,2W68KOHMJ

RE12 76552221 RESISTOR,OXIDEMETALFILM,1/2W220OHMJ

RE13 76011473 RESISTOR,CHIP,1/20W47KOHMJ

RE15 76366102 RESISTOR,CARBONFILM,1/6W1KOHMJ


RE17 76366363 RESISTOR,CARBONFILM,1/6W36KOHMJ

RE18 75005706 RESISTOR,RGC20.22OHMJ

RE23 76552152 RESISTOR,OXIDEMETALFILM,1/2W1.5KOHMJ

RE33 76011471 RESISTOR,CHIP,1/20W470OHMJ


RE37 76000574 RESISTOR,CHIP,1/16W2.7KOHMF

RE38 76000573 RESISTOR,CHIP,1/16W1.0KF

RE40 76000595 RESISTOR,CHIP,1/16W15KOHMF


RE43 76000445 CHIPJUMPER,1608TYPE



RE44 76011392 RESISTOR,CHIP,1/20W3.9KOHMJ


RE46 76000605 RESISTOR,CHIP,

1/16W

6.8K

OHM

F









RE57 76019386 RESISTOR,CHIP,1/16W5.6KOHMF

28

7/22/2019 32hl67u Svm

30/31



















RE95 76553122 RESISTOR,OXIDEMETALFILM,1W1.2KOHMJ



RE98 76011104 RESISTOR,CHIP,

1/20W

100K

OHM

J

SR81 23146597 RELAY,DC5V0.25W,DG5D1O(M)2

T801 23211920 COIL,LINEFILTER,TRF3258AD

T862 75004576 TRANSFORMER,ST3243

TE62 23217840 TRANSFORMER,CONVERTER,TPW3585AD

U01A 75005783 PCBOARDASSY,PE0246A1,POWER

U02A 75006093 PCBOARDASSY,PE0247C,LOW_B

U03A 75006083 PCBOARDASSY,PE0248B1,TN_AV

U03B 75006084 PCBOARDASSY,PE0248B2,FAV

U03C 75006085 PCBOARDASSY,PE0248B3,LED

U03D 75006086 PCBOARDASSY,PE0248B4,KEY

U04AS 75007221 PCBOARDASSY,PE0361A1,SEINE

W661 75005717 SPEAKERASSY,SPK1493AO,60X1208OHM10W

29

7/22/2019 32hl67u Svm

31/31

TOSHIBA CORPORATION1-1, SHIBAURA 1-CHOME, MINATO-KU, TOKYO 105-8001, JAPAN

32hl67u Svm

Documents

Transcript of 32hl67u Svm