32-Port NetDirector KVM Switch Flyer English (95-2609)
-
Upload
tripp-lite -
Category
Documents
-
view
216 -
download
1
description
Transcript of 32-Port NetDirector KVM Switch Flyer English (95-2609)
32-Port NetDirector™ Matrix KVM Switch and Accessories
NEW KVM PRODUCTS N E W K V M P R O D U C T S N E W K V
NE
W
KV
M
PR
OD
UC
TS
N
EW
K
VM
P
RO
DU
CT
S
NE
W
KV
M
PR
OD
UC
TS
N
EW
Control Up to 4,096 PCs or ServersProvide Distant ConsoleControl Up to 500 ft.PS/2*, USB* & Sun* Compatible
��
�
Ultra-Compact SizeTripp Lite's 32-Port/4-User NetDirector
Matrix KVM Switch (B060-032) provides
superior space savings designed for large
network environments where rack space is
at a premium. This KVM Switch makes the
best use of available rack space by
providing all the necessary features in a
compact 1U case that fits in a standard
19 inch cabinet. Conserve valuable server
room space while eliminating unnecessary
consoles and cable clutter. In addition,
the five available interface modules used
in conjunction with the 32-Port KVM Switch
are compact and lightweight and easily fit
in tight spaces.
Multi-User SupportTripp Lite's 32-Port KVM Switch is the
optimal solution for simultaneously
controlling multiple computers (a
combination of PS/2, USB, or Sun) by up to
four independent users. Each user's USB or
PS/2 console (keyboard, video and mouse)
connects to the KVM Switch via either a
USB or PS/2 Console Interface Module
(B062-001-USB and B062-001-PS2), which
can be placed up to 500 feet away from the
KVM Switch using Category 5e patch cables.
This gives users the ability to conveniently
monitor and control an entire network from
a distant location. USB, PS/2 and Sun
Server Interface Modules (B054-001-USB,
B054-001-PS2 and B054-001-SUN) connect
the KVM Switch to multiple PCs or servers,
also from up to 500 feet away using
Category 5e patch cables. Using connected
Console Interface Modules, the 32-Port KVM
Switch can control up to 32 directly
connected PCs or servers (or up to 4,096
PCs or servers when additional 32-Port
and/or 16-Port KVM Switches are connected
through a combination of daisy-chaining
and cascading).
Convenient & EasyOperationA number of convenient, user-friendly
features included with the 32-Port KVM
Switch make it easy to install and operate.
Simple plug-and-play setup requires no
complicated software and hot-pluggable
capability allows you to add or remove PCs
or servers without powering down the KVM
Switch or other computers. Selecting an
individual port is made easy by using pre-
programmed hotkeys or On-Screen Display
(OSD) menus. The OSD menus can also be
used for all PC and server control and
switching. Every time a PC or server is
connected to the KVM Switch via one of its
ports, the OSD port list automatically
expands, and the port names are
automatically reconfigured when the station
sequence is changed. Superior video quality
of up to 1024 x 768 pixels at 500 feet and
1920 x 1440 pixels at normal cable
distances combined with Auto Signal
Compensation (ASC) assures optimum video
resolution for long distances between the
KVM Switch and the interface modules or
computers. “Keep Alive” feature ensures
that the connected keyboard and mouse
work properly even if the switch temporarily
loses power. Convenient flash-upgradeable
firmware supports the introduction of any
new input/output device connected to the
32-Port KVM Switch.
Full Scalability,Compatibility & SecurityAs your network expands, you can daisy-
chain up to seven additional 32-Port KVM
Switches and cascade up to 16 additional
16-Port KVM Switches (B022-016) from each
station on the chain to gain control of up
to 4,096 connected PCs or servers (see
Daisy-Chain Configuration Guide on reverse
side). The 32-Port KVM Switch is compatible
with all major operating systems and the
Console Interface Modules support most
keyboards and mice. The 32-Port KVM
Switch maintains strict security over the
largest installations with a three-level
password security feature that
accommodates a super administrator,
administrator and multiple users.
Application:
MULTI-USER ORSINGLE USERENTERPRISE
32-Port KVM Switch (model #: B060-032)
USB Console Interface Module (model #: B062-001-USB)
USB Server Interface Module (model #: B054-001-USB)
* When used with server interface modules sold separately. At least one console interface module is required to operate the B060-032 KVM Switch.
200501020--2 page KVM Adendum.qxd 2/28/2005 10:04 AM Page 1
Premium Features & Easy OperationTripp Lite's IP Remote Access Unit
(B050-000) combines digital remote
KVM access via IP networks with
comprehensive and integrated system
management. The IP Remote Access Unit
offers convenient remote KVM access
and control through LAN or Internet
communications. It captures, digitizes,
and compresses video data and transmits
it with keyboard and mouse signals
to and from a remote computer. The
IP Remote Access Unit and software runs
on embedded processors only, and not
on mission-critical servers, so that there
is no interference with server operation or
even impact on the network performance.
The IP Remote Access Unit works with a
KVM Switch for access to multiple remote
servers over a single remote console. This
allows network administrators to manage
and monitor server components from any
station connected to the network, even if
the network is down, and allows them to
work in any remote location. Through TCP/IP
communication protocol, network
administrators can perform a variety of
tasks including system administration
and maintenance, BIOS level troubleshooting,
installing and running GUI applications,
routine monitoring, rebooting and more.
The IP Remote Access Unit requires no
additional software, making it easy to
install and operate. Security is of no
concern with advanced security features
including password protection, certificate
management and 256 SSL encryption on
keyboard, video and mouse. In addition,
Tripp Lite's IP Remote Access Unit offers
high video resolutions of up to 1280 x 1024
pixels at 60Hz.
2005
0102
0
95-2
609
1111 W. 35th Street, Chicago, IL 60609(773) 869.1234 • www.tripplite.com
IP Remote Access Unit
Manages and Monitors Server Components RemotelyTransmits Data with TCP/IP Protocol SuiteOperates in Multi-Administrator & Multi-Server Environments
Application:
ENTERPRISE
��
�IP Remote Access Unit (model #: B050-000)
Model # Description LEDs Shipping Weight (lbs.) Dimensions (H x W x D, in.)B050-000 IP Remote Access Unit. PS/2 Style Keyboards/Mice. HD15 Video Output 2 3.35 1.5 x 5.63 x 7
Model includes a 1-year limited warranty. The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice. Actual product may differ from photos.
NetDirector™ Network Command Center (Non-KVM)• Control an Entire Network in Just 1U of Rack Space—Includes a 15 in.
LCD Screen, Keyboard and Touch Pad
• Rackmountable in 19 in. System Rack (1U)
Detailed specifications available: www.tripplite.com
Model # Ports* Cabinet Style On-Screen Display (OSD) Daisy-Chain Capability** LEDs Shipping Weight (lbs.) Dimensions† (H x W x D, in.)Matrix KVM Switch
B060-032 32 1U Rack Yes Yes (up to 4,096) 32 12.3 1.75 (1U) x 17 x 10Model # Description LEDs Shipping Weight (lbs.) Dimensions (H x W x D, in.)Interface Modules
B062-001-USB†† USB Console Interface Module 2 2.2 2 x 8.25 x 3.25B062-001-PS2†† PS/2 Console Interface Module 2 2.15 2 x 8.25 x 3.25B054-001-USB USB Server Interface Module 2 0.3 0.75 x 1.5 x 3.5B054-001-PS2 PS/2 Server Interface Module 2 0.3 0.75 x 1.5 x 3.5B054-001-SUN Sun Server Interface Module 2 0.3 0.75 x 1.5 x 3.5
* Requires one Category 5e cable for each CPU connected. ** Daisy-chain up to seven additional B060-032 KVM Switches. Daisy-chain cable included with switch. † Model is designed with included rackmount hardware to fit standard 19 in. racks. Model width is forswitch case only, without mounting hardware. †† At least one console interface module is required to operate the B060-032 KVM Switch. B060-032 and console interface modules support Windows® 95/98/2000/NT/ME/XP, Novell®, Netware®, Linux® distributions andMacintosh® OS 8.1 or later. All models include a 1-year limited warranty. The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice. Actual product may differ from photos.
C.
C.
A.
A.
A.B.
D.
C.
E.
E.
F.
G.
B060-032 KVM Switch
Daisy-Chain Cable (Included with Switch)
Connected Server
Category 5e Cable
B054-001-USB, B054-001-PS2 or B054-001-SUN Server Interface Module
B062-001-USB or B062-001-PS2 Console Interface Module
Keyboard, Video and Mouse Cable
B.
D.D.
E.
D. D. D. D.
G. G. G. G.
The configuration below shows only the initial daisy-chaining connectivity scenario. Several different configurations can be obtained depending on your specific application.
F. F. F. F.
Daisy-Chain Configuration Guide
200501020--2 page KVM Adendum.qxd 2/28/2005 10:06 AM Page 2