Chronic Blistering Disease Part I Rick Lin, DO MPH SECOND year resident.
32 bit RISC CPU POWERmedia.klinkmann.ee/ee-files/ProFace.pdf · Reduces oveall debugging and...
Transcript of 32 bit RISC CPU POWERmedia.klinkmann.ee/ee-files/ProFace.pdf · Reduces oveall debugging and...
ISO9001JQA-1367
www.klinkmann.com
32 bitRISC CPU POWER
low cost volume HMIeasy configuring with PCvarious interfaces for PLCs, LANs,fieldbuses, networks, wireless etc.
User Interface Panelsfor PLCs and other CPU devices
G P S E R I E S
0 1
Programmable Operator Interfaces
ProgrammableOperator InterfacesGP SERIES
Faster, Smarter, BrighterPro-face's New GP77 series Operator Interfaces with SuperHigh-Speed 100 MHz RISC CPU
Next generation programmable operator interface - "From PLC's Face to its Brain" - the Power GP Series!
G P S E R I E S
0 2
Programmable Operator Interfaces
Power GP Series Full Line up!!
Today's rapid pace of high-tech innovation
has increased the need for industrial
automation.
Pro-face's "GP Series" programmable
operator interfaces, in pursuit of more
comfortable communication between
human and machines, have been striving
for the best: high performance and
advanced design.
Going through a series of innovation, GP
Series have gained popularity among
many users.
"From PLC's Face to its Brain" - Pro-face's
lineup of new concept programmable
display panels each pursues the primary
goals of the next generation of industrial
automation, "Faster, Smarter and
Brighter".
High PerformanceInterface GP77 Series 03-04
GP77 SeriesStandart Features 05
Evolving HMI-from PLC's"Face" to its "Brain" 06
Allows you to monitoryour production siteinformation in real time! 07
Save DevelopmentTime and Space whileImproving Operability 08
GP-PRO/PB forWindows ver. 4.0Version up Features 09-10
GP-PRO/PB for Windows StandartFeatures 11-13
A Wide Range of Supported DataFormats 14
Fieldbus Network andPeripheral Connections 15-16
Connections 17-18
Global Safety StandardComplian Products 19
Global Support Network 20
Specifications 21
c o n t e n t s
G P S E R I E S
0 3
Programmable Operator Interfaces
32
bit
RIS
C C
PU
PO
WE
RHigh Performance Interface GP77 Series
GP-577RT 100MHz RISC CPU Resolution : 640X480 pixels 10.4 inch TFT Color LCD FLASH EPROM 2MB (Screen Memory)
GP-577RS 100MHz RISC CPU Resolution : 640X480 pixels 10.4 inch STN Color LCD FLASH EPROM 2MB (Screen Memory)
GP-477RE 100MHz RISC CPU Resolution : 640X400 pixels 9 inch High Intensiry EL FLASH EPROM 2MB (Screen Memory)
GP-377RT 100MHz RISC CPU Resolution : 320X240 pixels 6 inch TFT Color LCD FLASH EPROM 2MB (Screen Memory)
Multi Unit E(Model: GP377RT-MLTE41)*Only for GP-377R
2-Way (via Ethernet) communication Printer I/F CF card support
G P S E R I E S
0 4
Programmable Operator Interfaces
GP-377S 100MHz RISC CPU Resolution : 320X240 pixels 6 inch STN Color LCD FLASH EPROM 1MB (Screen Memory)
GP-377L 100MHz RISC CPU Resolution : 320X240 pixels 6 inch Monochrome LCD FLASH EPROM 1MB (Screen Memory)
New Low-Cost, High Performance 6 inch Models
ne
w f
ac
e
Ultra-fast 100MHzRISC CPU equippedQuick startup and screen change forsmooth operation!3 times faster overall performance. *1
2 times brighter *1 / 30,000hours *2 backlight lifetime2 times brighter display and 1.5 timeslonger backlight lifetime.*1 Compared to GP-370S and GP-370L.*2 24 hours/day use at normal operating temperatures.
High Quality Asian FontsChinese, Korean andTaiwanese fonts displayed onGP377 S/L units are,now, available with smootherquality of 32X32 dots.
Back light Burn-out DetectionFor your safetly operation, thebacklight can be monitored on thefront panel LED with the Touch panelInput control settings.
China Korea Taiwan
16X16 32X32 16X16 32X3216X16 32X32
G P S E R I E S
0 5
Programmable Operator Interfaces
32
bit
RIS
C C
PU
PO
WE
R
faster
GP77 Series Standard Features
Faster Brighter ClearerFast screen changes forsmooth operationNew 100MHz chip is 3 timesfaster!*The GP77's RISC CPU calls up and opensscreens in a flash, providing smooth,"no-wait" operation.
* Compared with GP70 series unit running demo application.
Clear viewingin bright areasBoth TFT and STN displaysare 2 times brighter!*The GP77's screens are twise as bright asGP70 series units, and rival that of astandart CRT.
* Compared with GP70 series.
Create active andvivid applications64 color TFT and STNDisplaysThe GP77R's easy-to-read 64 colordisplay allows you to create dynamicapplication screens.
Reduces oveall debuggingand maintenance timeData transfer is twise as fastThe GP77R's blistering 115.2 Kbps* speedcuts your PC to GP data transfer time in a half.It also means you spend your valuable timemaintaining and debugging, instead of waitingfor data download or screens to change.
* Some PCs do not support 115.2kbps data transfer
38.4Kbps
115.2Kbps
Type R
GP70 Series
V4.0
Adjusts to any environmentSelect from 4 brifhtness levels*You can easily adjust the GP77's brightnesslevel to fit your operation needs.
* GP-477RE has 2 levels of brightness
Alarm types are recognizable at a glance3 flashing speeds*Screen data ON/OFF blinking speedsare selectable (slow, medium, fast),making alarms and data easy torecognize.
* Available with GP-577RT, GP-577RS and GP-377RT/S only.
Long - life backlight
In additionto improved brightness,backlight lifetime is significantly longerthan GP 70 Series units. Backlights arealso user-replaceable ang easilychanged.*1
GP-377 RT (50,000 hours)*2
GP-577 RT (40,000 hours)*2
GP-377 S/L (30,000 hours)*2
GP-377 RS (25,000 hours)*2
* 1 exept GP-377RT* 2 Time required for backlight brightness to decrease 50%
High speed GP - to PLCcommunication
GP77 Series supports high speedRS-232C data transfer (115.2Kbps)
PLCs supporting 115.2Kbps*Matsushita FP10SHMitsubishi Melcec QnA seriesOMRON CS-1Sharp JW30 series
* For more details, please contact your sales representative or Pro-face.
Built-in 2-port Function
The 2-port function, using the "DataTransfer Cable", and "Programming I/FCable", allows direct connenctionsbetween GP and Mitsubishi PLC.This reduces your connection costs.
* No 2-port adapter required
Built-in 2-portfunction
Data transfer cable
2-portadapter
Programmingtool
MitsubishiPLC
Ladderprogrammingtool
Mitsubishi PLC
ProgrammingI/F cable
G P S E R I E S
0 6
Programmable Operator Interfaces
Evolving HMI-from PLC's "Face"to its "Brain"Programmable Operator Interface revolution!-GP77R Series
Intelligent operator interfaceThe GP77R SeriesPro-face's GP77R series units help you meet the recentdemands put on the workplace by ISO, PL and HACCPrequirements. Pro-face's new hardware and softwareallows you to easily collect vital historical productionmaintenence data, and helps you perform esential preven-tive maintenence.The newly developed GP77R panel transforms the role of an HMI from the "face" of the PLC ti its "brain". This addsup to significant cost and man-hour savings for the manage-ment and control of your processing information.Furthemore, the combination of high-speed I/O control bet-ween these units and connectable PLCs, and the GP77R'senhanced "intelligence" ensures that your applicationsperform better than ever.
Past fromNow
Network Open Network
Calculation
Data Processing
Data Filing
Communication
I/O Control
Calculation
Data Processing
Data Filing
Communication
Operator I/F
I/O ControlOperator I/F
Intelligent Features
New Products Supporting the GP77R Series Evolution
Data Filing Communication
Logging Function Allows you to easily report production information directly from your factory floor.
Recipe Function Provides production setting data quickly to PLCs in a Flexible Manufacturing System. Present values and process conditions can be easily replaced at any time.
2-Way Communication This software allows you to share data with PLCs with ni network capability, or between different makes and types of PLCs.
Ethernet EthernetEthernet
Printer Printer
PC PC
Back upMemory
orCF card*
Back upMemory
orCF card*
PLCPLCMemory
Memory
Memory Memory
Memory
Memory
Separarte Programs
PLC
Maker A Maker B Maker C
Single Configuration
PLC
Screen editor software
with Pro-Studio(PSW-ED01-V20 or higher)
Features include the ability to Log and File PLCinformation. Helps to reduce PLC ladderprogramming processes/steps and amount ofmemory used.
Data collection software
with Pro-Studio(PSW-ED01-V20 or higher)
This software allows the GP77R to act as"Ethernet gateway" and provide programless datacommunication between a host PC, GP77R andmultiple different PLCs via an Ethernet network.
Large size / Medium size Multi Unit
(GP077-MLTE41(GP377R-MLTE41
The optional Multi Unit Eexpands the GP77R Seriesconnenctivity with anEthernet I/F. CF card I/F andSound output I/F for P477R/DP577R and rinter I/F for GP 377RT.
Photo: Multi Unit E(Model: GP377R-MLTE41)
Expansion Unit
(10BASE-T)(Model: GP070-ET41)
This interface unitallows GP to transmit data withthe host via EthernetNetwork.
GP-577RTGP-577RS
GP-377RTGP-477RE
100MHz RISC CPUProgrammable Operator Interface
GP77R Series
G P S E R I E S
0 7
Programmable Operator Interfaces
32
bit
RIS
C C
PU
PO
WE
R
2 3 4 5
1
6
Allows you to monitor your productionsite information in real time!
2-Way Data Collection Software
Pro-Server with Pro-Studio V2.0Logging Function Alarm History Function
ProductionControl
Allows you to easily create
daily andmonthlyreports
Ensures precise alarmcontrol. Voice alarm and
alarm displays areautomatically executed.
Allows you to easily give
instructions andcollect data forproduction line.
Provides different types of program-less 2-Way data communication6
Exchangesdata with
network PLCs.
LoggingData
storage in GPmemory
and/or CFcard
Filingdata storage
in GPmemoryand/or
CF card.
Sends andreceives GP
filing data viaMS Excel.
Sends andreceives PLC
device data viaMS Access.
Collectsevent
data PLC via MS Access.
Sends andreceives GP-
acquired datravia MS Excel.
Collects PLCdata via
MS Excel.
Program-less datacommunication Program-less data
communication
A company PLC B company PLC C company PLC
Alarm!
Polling (Optimization Function)Data can be read from multiple GP units simultaneously,thereby reducing the number of data read requests froman application. Improves data read perfomance when usingmultiple GP units.
Security FunctionPasswords are used to prevent data access by personelother than system administrators, thereby protecting datafrom problrms such as device overwriting, etc.
CF Card Transfer FunctionLogging, filing and alarm data that has been "filed" viathe GP's screen editor software can be transfered toanother GP77R unit's CF card using an Ethernet network.** requires installation of Multi Unit E.
OPC Compatible (OLE for Process Control)Microsoft's object technology OLE/ActiveX allowsmanufacturing related industrial applications to be easilyconnected.
Device Monitoring FunctionSince PLC devices can be memored by simply selectinga symbol, on Pro-Studio a simple simulation can beperformed prior to starting an application. With this function,multiple screens can be displayed at one time, and the IPaddress and device address can be input.
RR R R R
Recipe Function
Work/production
siteinformation.
G P S E R I E S
0 8
Programmable Operator Interfaces
Save Development Time and Space while Improving Operability
Downsize and Simplify Your Application
Simple Communication Methods
Create Unique Screens in Minutes
Minimize Your Work for Maintenance and System Expansion
Using the GP series keep your systems aspossible, even though your control programs getmore and more sophisticated.The touchpanel graphic operator interface, GPSeries, is a state-of-the-arts intelligent equipment,which has been widely installed as a main operatorpanel throughout the manufacturing fields. You can operate production systems via numerous data and graphics displayed on the screen, whilereducing numbers of control programmingand wiring.
[Direct Access Method]
Simply select your target PLC when you createscreen data. The Direct Access method allows the GP to communicate with Word and Bitdevices in the PLC memory directly. Since thismethod is, also, called as a program-lesscommunication, there will be no extra loadon the PLC.
[Memory Link Method]
You can create your own communicationprograms to connect the GP with yourspecialized controllers, such as single-boardcomputers and PCs. The GP displays datamapped from the host's memory for monitoringand operation.
You can simply and freely create your ownoperation screens for each requirement inyour applications, using a variety of powerfultools, such as the Part Box, Tags andD-Script macro program, on the GP-PRO/PB||| for Windows software. The software creationof the operator interface also, allows you easychange, debugging and reue of the datawhenever required
After creating data, just download it to theGP unit, then connect the GP with the hostvia a single cable for immediate operation.Ypu can, also, simulate the GP with your PCfor quick debugging, before you take it tothe field.
ISO-7000 Symbols
Meter Graphs
0001
0002
0003
00040001
0002
0003
0004
G P S E R I E S
0 9
Programmable Operator Interfaces
32
bit
RIS
C C
PU
PO
WE
R
1P O I N T
GP Series Screen Editor Software
GP-PRO/PB ||| for Windows Ver.4.0 Version UP Features
Screen Creation andEditing is Easier and MorePowerful Than Ever
Use Your Device Addresses More Efficiently
Quickly Check Load Screen nesting Levels
Try These Userful Functions!!
Global Cross references! Maintenence is easier than ever! (List Display)
All of a project'sdevice addresses canbe checked at aglance.
System Upgrades Ares Easier! (Map Display)
Device addresses usagecan also be displayed asa chart, allowing you toeasily find unusedaddresses.
Nesting List!Version 4.0 can create a Nesting List for complex screenscontaining multiple Load Screens. This will speed up Your screenediting as you no longer need to spend time searching for a loadscreen's original data.
Enlarge and Move Objects Via Your Keyboard CursorFine-tuning the position andlayot of your screen objects onscreen grid points via a mousecould be difficult. Version 4.0allows you to use yourkeyboard's arrow keys toenlarge and move objectseasily, making detailed screencreation and layot easier thanever.
Move by a dot Enlarge by a dot
Direct Entry of Drawing Object Coordinate Values.To change an object'sposition or size, just enterthe object's coordinatevalues, guaranteeing100% accurate screenlayot.
Cursor Position Zoom.Enlarges the area whwere thecursor is currently positioned 3times, allowing easy editing ofdetailed screen drawings.
Hairline CursorUse this cursor as astandard when you alignscreen objects.
Font selection and Mark ScreensWindows fonts can beimported as character datato a project's Mark screens via the font selection function,allowing you to createscreens with a variety oftypes of characters.
Text Imageszoomup!
Pi!
2P O I N T
3P O I N T
4P O I N T
G P S E R I E S
1 0
Programmable Operator Interfaces
Improve your efficiency by reducing the amount ofrepetitious Alarm message editing and registration.
Importing/Exporting ProjectAlarm Data ImprovesEfficiency
Extended Logging/Filing/Programming Functions
Expanded Range ofPoweful Tools
Alarm Editor Screen
Version 4.0 allows easy editing and document control via CSV format data.Using the CSV format, alarm files can be exported to the spread sheet software such asMS-Excel, where alarm messages can be added and edited more efficiently. Once thiswork is completed, these CSV format files can be imported back to GP-PRO/PB||| forWindows and alarm files.
[Logging] [Filing]
[D-Script]
Improved Data Collection via "Looping"When the acquired logging data exceeds the GP'smemory capacity, data logging can continue bysimply overwriting the previosly acquired loggingdata. Also, logging data can be saved automaticallyto a CF Card with a simple setting.
Transferable data items are increasedThe number of data items, that can be tranferred at one time has been increased to 1000 words.
Multible data filing FoldersMultiple folders of filing data can be stored in both the CF-Card and the GP's international memory.
The number of data items, that can be tranferred
Memory Batch Copy Memory Block Initializatio Loop Processing Address Offset Designator
GP-X10 Series screen datacan be converted easilyUp loadded from GP-X10units to GP-PRO/PB||| for Windows V4.0 directly andconverted for the later GPmodels.
[Wide Variety Files of Images] [Useful Sound Messages] 270 of 64-color Part images areodded for more sophiticatedscreens of your applications.
Redy to use 270 message samplesin the WAV format are provided. Alarm has occurred. Return loweing elevator Confirm status. to upper limit position. Now opening entrance Now raw materials door. available Starting operation. This card can not be Temperature alarm. used. Careful - Now rotating. Conveyer is operating. Add material to hopper.
GP-PRO/PB||| forWindows v4.0
GP-*10 Screen Data
direct
CSVFormat
G P S E R I E S
1 1
Programmable Operator Interfaces
32
bit
RIS
C C
PU
PO
WE
R
1 2 3 4
GP-PRO/PB||| for Windows Features
Reduces GP program debugging timeEven if you don't have a PLC available to test your newGP program, you can still quickly and easily check whetherthe program works as planned via this feature
* This feature is not available with Memory Link selection.
Intelligent operator interface
Simulation Documentation
File Managament
Create Screens in Minutes High-level funktionalitity More SophisticatedProgramming
PartsPlacementSelect from over 1800pre-made Parts. Chooseonly the ones you needand place them on yourscreens.
LibrariesMuliple objects can begrouped and registeredfor your own library.
Tag SetupA wide variety of userapplications can be easilycreated using the Tagfunctions (active screen)
D-ScriptEasy to use Macroprogram reduces thehost controller's pro-gramming load.
[Automatic Documentation]Reduces time required for creating documentsJust by selecting the items you wish to print out, you cancreate specification and manual documents easily. You canalso use this feature to export project data in RTF format.
Allsupported
PLCsare OK!
Just select from menu...
...and print!Export in RTF format
[Project Manager]Simplifies Project Screen managamentScreen data can be managed via individual screen files.In addition to moving or copying screen data, simplydoyble-clicking on a file name allows you to edit thatscreen. You can also make data files sharable throughyour PC network.
G P S E R I E S
1 2
Programmable Operator Interfaces
Simple Communication Methods
[1,800 Part to Choose]Over 1800 parts and symbols arestored in the GP-PRO/PB||| library.Just select the ones you need andplace them onto your applicationscreens.
Parts
Adjustable Switch Sizes and Layot Minimum Touch Switch Size: 20X20 pixels 1 or 2 point touch selectable
ONON
MANUALMANUAL
MONITOR
MONITOR
20 pixels
20 pixels
Touch/Switches/Lamps/Graphs/Numeric Displays/Picture Displays/Alarm Displays/Data Displays
Switches Tank Graphs
Lamps Library Parts
[Historical Alarm Display] Display Types: Active, Historic, Log Time format: hours, minutes, and even seconds* can be displayed. * Not supported by GP270 Series
[Alarm Summary]Allows easy machine condition monitoring and fastmaintenence
Alarm Types:summary display,message scrollingSub. Windowscan be easily setup for detailed inmatim
Sub-Window Image
Detailed information for an individual alarm message can bedisplayed in a sub-window. You can easily create an on-linemanual for quick maintenence.
[Picture Display] Enable to visualizes entiresystems
Graphics:Dot, Line, Polyline, Square/rectangle, Fill, Polygen, Circle,Oval, Arc, Pie, Scale, Mark,ISO-7000 Mark LibrariesAttributes:Lighted, blink, reserve, off
PrintoutDisplay screens can be easily printedout for daily report.* Supported only by large-sized GP unitsGP377RT series
Data StorageAlarm data can be backed up in GP'sbackup memory.* This feature is supported only by certain large-sized GP and GP377 series.
[Text Display]Multiple character sets supported Fonts: ASC|| (English and European) Chinese, Japanese, Korean, and Taiwanese fonts. Font Styles: Normal, Bold, Raised.
[Image Display]Photo and CAD images can be imported
BMP image display
DXF image display
Importable Files DXF: Common file format for CAD and 3D screens BMP: Image format for pictures from digital cameras or image scanners
[Graph Display]Various Types of Graphs to Visualize Important Data Data Foramat: 16-bit absolute/indirect data Data Display Format: Binary, BCD Warning Display: direct/indirect setup for maximum and minimum ranges
Graph Level Status by ColorsFill-Below-Line for Trend GraphTank Graph (Library parts)Meter Graph (parts)** These features not supported by GP270 series
G P S E R I E S
1 3
Programmable Operator Interfaces
32
bit
RIS
C C
PU
PO
WE
R
Screen Editing[Dublicate Copy]Specifying the nuber of columns androws to be muliplied will allow you toeasily make multiple copies of anyobject. Addres incrementation canalso be performed automatically.
[Object Drawing]With a rich array of drawingtools, screens can be drawnquickly and easily - like CADsoftware.
[Active Window] Up to 3 window screens can be displayed a single base screen, all simultaneously displaying animated data. Global Window: (1/screen) A common window for all screens Local Window: (2/screen) Unique window display for each screen Screen overlay order can be changed with a touch.
[Video Display]Video feeds provide live data* This feature is only supported by GP-570VM.
Video Display Size: standart mode, zoom mode Transparent display of Video Window 3 NTSC video input channels VGA disolay (640X480 pixel)
[Tags]Tags are used for the creationof your screen animationfunctions. 30 different tagfunctions have been preparedfor the GP Series units.Combinations of these tagsproduce a wide variety offunctionallity, allowing you toexpand the scope of yourapplications.* Depending on the GP models, supported Tag features variety.
["D-Script"-MacroProgramming Language]Implemet a variety of simplecontrol tasks with thispowerful tool
features include: Math: +, -, *, /, Remainder, Assign Boolean: AND, OR, NOT, <, <=, >, >=, EQUAL, NOT EQUAL Triggers: Timer settings, Bit Rising, Bit Falling, when expresion becomes True/False Functions: Load screen,Draw
Dublicate copyEnlarging andreducingDrawing Area
VM screen
VGA screen
Tag Features
Touch Switch Alarm Summary <touch panel input> <alarm summary text display> <keyboard setup> <alarm summary display> <selector switch input> Alarm Message Display> <inching function> Graphic DisplayNumeric Display <object drawing> <numeric display> <library display> <static data display> <library static display> <alarm boundary display> <mark display>Graph Display Animated Objects <graph display> <free library display> <static graph display> <moving mark display> <static data display> <rail settings> Trend Graph Display Character DisplaySetting Input <string display> <key input< <display text data> <keyboard setup> Time Display <alarm boundary> <time display> Device Write <write to device> Window Display <window display> Video Window Display <video window display>
* Some of the above features are not supported by GP-270
Powerful Programming Tools
G P S E R I E S
1 4
Programmable Operator Interfaces
Sound Output Function
A Wide Range of Supported Data Formats
CF Card Support (Compact Flash)
Dynamic Link between Operations and Control
An optional unit allows WAV format files(i.e. sound, alarm) to be imported to theGP, and played through an externalspeaker. This feature can be used in avariety of applications, such as multi-media, and machine operator information.
Filing CSV dataTrend data, sampling data and alarm active/history/log data can all beexported to the CF card using the CSV file format. Database andspread sheet applications can then easily import this data for information managament and processing.
Screen Data StorageA screen project on GP unit can be copied on a CF card formaintenance purpose. Prior to copying the project to onather GP unitsystem, set up on the GP unit is required.
Memory Expansion on CF cardIn addition to the internal memory on GP unit, following data can be stored for GP operation: Filing Data Logging Data Sampling Data Trend Graph Data Alarm Data Image Data Sound Data Screen Project Data
* Multi Unit E required
GP-PRO/PB||| forWindows V4.0
Pro-ControlEditor V2.0
(under Development)
Simple input/output operations can be performed by merely dragging and dropping. You need no knowledge of programming.
All the data required for the parts on the screen(addresses, name plates, and names) are automaticallypassed by dragging and droppingthe coresponding cymbols created on the ladderover the screens of the GP-PRO/PB||| forWindows. You no longer need to preparedetailed design specifications to notifyaddresses. Thos allows for impelmenting the trueintegration of display and control features, increasing the work efficiency greatly, andreducing the number of processes significantly.
VersionUp
Universal File Format SupportReduces data Duplication
Text
DXF
CSV (chart) WAV (sound)
RTF
BMP
Screen Data from all previous GP Series can be converted to the latest models, also
G P S E R I E S
1 5
Programmable Operator Interfaces
32
bit
RIS
C C
PU
PO
WE
RFieldbus Network and Peripherial Connections
Direct Connection to Field Network
[Profibus-DP]Profibus-DP I/F Unit (GP070-PF11)
[DeviceNet]Device Net Unit (GP070-DN41)
[Interbus]Interbus Unit (GP070-IB41)
[DeviceNet]Device Net Unit (GP070-DN41)
[CC-Link]CC-Link I/F Unit (GP070-CL11)
[Ethernet]GP Ethernet I/F Unit <10-Base-T>
(GP070-ET41)
Max.Raud RateMax.NodeMax.I/O
[Units Supported]SIEMENSSIMATIC S7-300/400 Series, as well as otherProfibus-DP supporting PLCs.
12Mbps64
IN : 64 WordsOUT : 64 Words
Max.Raud RateMax.NodeMax.I/O
500Kbps64
IN : 127 WordsOUT : 127 Words
Max.Raud RateMax.NodeMax.I/O
500Kbps512
IN : 64 WordsOUT : 64 Words
Max.Baud RateMax.Node
[Units Supported]Fuji Electric Co., Ltd.MICREX-F Series PLC
500Kbps64
Max.Raud RateMax.NodeMax.I/O
[Units Supported]Mitsubishi Electric Corp. PLCMELSEC A SeriesMELSEC QnA Series
100Mbps64
IN : 128 BitsOUT : 128 Bits
* The above communication interface modules are only for GP-470 or larger units.
Additional fieldbus Network Units SupportedFieldbus
AB Remote I/O
AB DH+
ModbusPlus
Module *1
QPI-ABR-201
QPJ-ABR-201
QPI-ABD-201
QPJ-ABD-201
QPI-MDP-201
QPJ-MDP-201
GP Model
GP47*/57* series GP470/570, GP477R/577R Series
GP270/370 series
GP47*/57* series GP470/570, GP477R/577R Series
GP270 series
GP47*/57* series GP470/570, GP477R/577R Series
GP270 series
*1 Manufactured by total Control Products, Inc.
G P S E R I E S
1 6
Programmable Operator Interfaces
[Peripheral Device Connections]
GP77 Series Standard Features
Direct Connection to Various NetworksCommunication Module Interface
Direct connection to various Feield networksbecomes possible by attaching communicationmodules.
Real-time OperationAuxiliary Input/ Output (AUX)
From the touch panel, you can send informationto the PLC or to machine's DIO I/F in real time.(Touch output: 8 points, system alarm output: 1-puint, buzzer
output: 1-point, remote reset: 1-point)
* Only supported by GP-47* or larger units
Communication whit a host ControllerSerial (SIO) Interfaces
A single cable is all you need for hostcommunication, reducing maintenance time.
Connecting to a color PrinterPrinter interface
You can printout GP screens while in RUNmode. Alarm history data, includingtrigger/recovery times can also be printed.
Screen Data TransferTool Connector
This interface is used for transfering screen datacreatedby GP-PRO/PB Series. Also, you canconnect a bar-code reader to the GP.
PC Screen DataVGA Input Interface
Your PC's VGA screen can be displayed onGP 570 VM unit.
Video Display from Cameras and RecordersNTSC Video Input Interface (3 channels)
NTSC Video images can be displayed in awindow on certain GPs. Window display sizeand position can be changed, in addition tozooming and channel switching, from touchpanel operation or host controller.(Theese features are only supported by GP-570VM unit.)
(Example: GP-675T Rear face)
Communication Module Interface* Only supported by GP-47* or larger units
Auxiliary Input/Output (AUX)DC24V ParallelI/F cable (user made)* Only supported by GP-470 or larger units
Serial Interface RS-232C (Max 15m) RS-422 (max 600m)*host controller connection distances differ
Printer Interface*Only supported by GP-47* or larger units
Tool Connector Data Transfer Cable Memory Loader || Bar-code Reader
(GP-570VM)Connectable Barcode Readers
Make Welcome Design
Touch Type Model 1090
Handheld Type Model 1240
Foxed Type Model 1045
VGA Input Interface (3ch)RGB Cable (commercially available type)
VGAInterface
PCCCD camera, VTR,TV output, etc.
CommunicationModule
Signal TowerBuzzer, etc.
Host Controller
PLC
Single board Computer
PC
Printer
Data Transfer Cable, etc.
Only for GP-570VM unit.
G P S E R I E S
1 7
Programmable Operator Interfaces
32
bit
RIS
C C
PU
PO
WE
R
Programless CommunicationConnections with many different types of PLCsthroughout the worldThe direct access method supports 76 protocols for PLCsfrom 25 manufacturers world wide, meeting diverserequirements or customers.
Host controller
PLC
I/Omemorytable
Data inquiry
Response
Connections with Multiple PLCsMulti-link ConnectionsNeither a dedicated device nor a specialprogram ir requiredMultiple GP series units may be directly connected atease to a single host (computer) link unit for PLCs by thedirect access method without using any dedicated deviceor special program.* For multilink connections, it is recommended that our multi-link cable (GP230-IS12-O) or RS-422 terminal bracket conversion adapter (GP070-CN10-O) is used.
Host PLClink unit
RS-422 cable(GP230-IS12-O)
Maximum extended length ofRS-422 cable: Max 600 meters
GP series GP series(up to 16 unitsmay be connected)
Direct Connection with a PLCDirect Connection with the CPUProgramming PortSystem configuration at low costsThe supported protocol allows the GP series unit to be connecteddirectly to the CPU programming port.
* Applicable PLCs: PLC MELSEC A series/QnA series/FX series of MitsubishiElectric Corp.
2-port Adapter IIThis compact adapter allows you touse both the GP series unit and thePLC's peripheral units for the efficienttransfer, monitoring, and debuggingof a PLC program. The direct mode can be selected for high-speed communication. Isolated signals via 2 port Adapter II avoids noise interference to PLC' CPU.
* The GP430-IP10-O and GP430-IP11-O are not applicable* Applicable PLCs: PLC MELSEC A series/QnA series/FX seriesof Mitsubishi Electric Corp.
Connected to a peripheral device
PLCprogrammingsoftware
RS-422 cablefor two-portadapter II(GP070-MDCB11)
GP series
Memory link expansion capability: Multiple GP units may be connected to a single personal computer or microcomputer board. Graphic data can be transferred from the host controller to the GP unit. The transmitted and received data can be checked for errors including those in check sums, CR, LF, ACK and NAK.
PLC
Single-boardcomputer Data
table
Memorytable
Up to 32 GPs may be connected to a single host computer
Barcode reader
[Easy Backlight Replacement]Service personell can easily replace the backlightright on the factory floor, reducing maintenance time.* Not available with GP-570L, GP-H70 and GP377RT Series units.
[IP65f Rating]All GP units are suitable forinstallation in machines usedin wet or dusty areas.(Applies to the front panel ofa unit mounted in a flat panel)* Does not include GP-H70 Series unit.
[Screen Data Exchange]Memory Loader II (GP070-LC01-O)You can transfer GP screen data to an FlashMemory Card via on the Memory Loader II.This allows you to update GP screen datawithout a PC. This device is also handy forduplicating applications.* Prior to using this tool, the GP must be set up.* Please check the version for applicable GP unit.
Connections
Connections with a PLC
GP Maintenence
G P S E R I E S
1 8
Programmable Operator Interfaces
Connectable PLCs and temperatur ControllersFanuc
FATEK
Fuji
GE Fanuc Automation
Hitachi
Izumi
Keyence
Koyo / PLC Direct
MatsushitaElectric Industrial
MatsushitaElectric Works
Mitsubishi
Modicon
Omron
ORIM VEXTA
Rockwell
Sharp
Shinko
Siemens(SIMATIC)
Toshiba
Toshiba Machine
Toyota
RKC
Yaskawa
Yokogawa
Yamataka
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series Name
Series NameCPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPULink
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link Direct Multilink DeviceNet
Ch.O DH+ DH485 Remote I/O
Multilink
DeviceNetMultilink
Direct
Prgm Port 3964/RK512 Profibus MPI Interbus
Multilink Ethernet
1:n
1:n
Direct Multilink
1:n
1:n 1:m n:m EthernetDirect
Direct Modbus Plus (n:m)
Direct
Multilink
Multilink Ethernet CC-Link
Direct
Direct
Direct Multilink
Direct Multilink DeviceNet
Direct
Direct
Direct
FANUC Power Mate (Motion Controller)FANUC Series
FACON FB
MICREX-F
FLEX-PC
Series 90-30
Series 90-70
HIDIC-S10
HIDIC-H
HIDAC ECS10 mini
FA-2
FA-2J
FA-3S
MICRO3
KEYENCE
KOSTAC SGKOSTAC SUKOSTAC SZ�KOSTAC SR
DL-205DL-305DL-405
Pandac 7000
MEWNET
MELSEC-A
MELSEC-F2
MELSEC-FX
MELSEC-QnA
Modbus MasterModbus Slave
884/984
SYSMAC C
SYSMAC CCS1
SYSMAC
SYSMAC CV
SYSMAC CS1
AB SLC500
AB PLC-5
New Satellite JW
SELMART
S5
S7-200
S7-300
S7-400
PROSEC EX
PROSEC T
PROVISOR B
PROVISOR TC200
TOYOPUC-PC2
TOYOPUL-PC3J
CB Series
SR-Mini
Memocon SC
Control Pack
Memocon Micro
PROGIC-8
FACTORY ACE
SDC
Powe Mate-MODEL D16-MC
20MC
F30F50F60F80
F80HF81F120
F120HF120SF200F250F70SNB1NB2NB3NJNS
CPU311/CPU331CPU731/732CPU771/772CPU781/782
2 /2 E4 /4 F
H20H28H40H64
H-200H-252CH-300H-700H-2000H-2002H-4010EH-150
EC-40HRS10min
PF2-CPU1PF2-CPU5MPF2J-CPU1PF3S-CP11PF3S-CP12PF3S-CP13
MICRO3
KZ-300KZ-A500KZ-350
SG-8SU-5/6/6B
SZ-4SR-21/22D2-240D3-330
D4-430/440
P7000-PLC-001P7000-PLC-031HP7000-PLC-031SP7000-PLC-A01
FP3/5FP10(S)
FP1FP-M
FP10SHFP2
FPQ-C32CTFPQ-C16T
A2AA3AA2UA4U
A2U-S1A2US
AZUS-S1AZUSH-S1
A2SHA3UA0J2
A0J2HA1NA2NA3NA3H
A2CJ-S3A1S
A1SHA1SJ
A2CCPUC24F2-20MF2-40MF2-60M
FX0
FX1
FX2
FX2C
FX2N-64MR
FX2NC-32MT
FXON-60MR
A1FX
FX2N
FX2NC-64MR
Q2AQ2A-S1Q2AS
Q2ASHQ2AS-S1
Q3AQ4A
__________884
984 A/B
C20HC28HC40HC120
C120FC200H
C200HSC500
C500FC1000H
C1000HFC2000
C2000HCQM1-CPU11CQM1-CPU42
CPM1-20CDR-ASRM1-C02
CPM2ACS1HCS1G
C200HX-CPU64C200HE-CPU42C200HG-CPU43
C200HX-CPU85-ZC200HX-CPU44C200HG-CPU63
C200HE-CPU42-ZC200HX-CPU64-Z
CV500CV1000CVM1CS1HCS1G
E1 CPU11
SLC-5/01SLC-5/02SLC-5/03SLC-5/04PLC-5/11PLC-5/20PLC-5/30PLC-5/40PLC-5/40LPLC-5/60PLC-5/60L
JW20JW-32CUH
JW50JW70
JW100JW-32CUH1JW-32CUH3
SELMART
90U95U100U115U135U155U
CPU212CPU214
CPU312IFMCPU313CPU314CPU315
CPU315DPCPU413-2DP
EX2000T2ET2NT3
T3HB200CH
B200CUFB200CURM
B200CUFRM
TCCUHTCCUL
PC2L2
PC2JPC3J
CB-100 Z-1021CB-400 Z-1021CB-500 Z-1021CB-700 Z-1021CB-900 Z-1021
H-RAP-A Z-1021
U84U84JU84S
GL40SGL60SGL60HGL70HGL120GL130
CP-9200CP-9200H
CP-9200SHMicro
PROGIC-8 PC01MP930MP920
FA500FAM3
SDC20SDC21SDC30SDC31
SDC40ASDC40BSDC40G
OO
O
T-Link
O
O
OOOOOOOOOOOOOOOOO
O
O
OOOOOO
DirectOOOO
O
OO
OOOOO
O
OOOOOOOOOOOO
O
OOO
O
OO
OOOOOOO
OOO
OO
O
OOOOOOO
OOOO
OOOOOOOO
OO
OO
O
O
OOOO
O
OOOOOOOO
OOOOOOO
O
OOOOO
O
OO
OOOOOOO
OOOOOOOO
OOOOOOOO
OO
O
O
O
OOOO
O
OO
OOOOO
OOOO
O
OOO
O
O
OO
OO
O
OO
OO
O
O
OO
OOOO
OO
OOOOOOOOOOOOO
OOOO
OOOOOOOOOOOOO
O
OOOOO
OO
OOOOOOOOOO
OOO
OOO
OOOOOO
OO
OOOOOOOOO
OOOOOOO
O
O
OOOO
O
OO O
O
OOOOOOO O
O
OOOOOOOO
OOOOOO
OOOOO
OO
OOOOOO O
OOOOOOOOO
OO
O
OO
OOOO
OO
OOOOOO
OOOOOOOOO
O
O
O
O
OO
O
OO
OO
OO O O
OO O O
OOOOOOO
G P S E R I E S
1 9
Programmable Operator Interfaces
32
bit
RIS
C C
PU
PO
WE
R
GP-577RT GP-477RE
GP-675T GP-675S
GP-571T GP-570VM GP-570T
GP-570S GP-470E
GP-377S GP-377LGP-377RT
GP-577RS
High Performance Interface GP77 Series
GP77 Series
GP70 Series 9"/10.4"/12.1"
G P S E R I E S
2 0
Programmable Operator Interfaces
12.1"
10.4"
9"
6"
5"
GP675TGP675SGP577RTGP577RSGP571TGP570VMGP570TGP570SGP477REGP470EGP377RTGP377SGP377LGP370SGP370LGP270SGP270LGP-H70SGP-H70L
O
O
TC21-24VPSC21-24VP
OEG21-24VP
O�OOOO
SC21-24VPLG21-24VP
OO
O
TC31-24VSC31-24V
EG31-24V
SC31-24VLG31-24V
OO
O
O
OOOOO
CE MarkedUnits
UL/c-UL Approved Units
GP-370SGP-370L GP-H70S GP-H70LGP-270S
GP-270L
GP70 Series 5"/6"
Global Support NetworkPro-face HMI B.V. Scandinavia
Pro-face UK
Pro-face HMI B.V. France
Pro-face HMI B.V. Germany
Pro-face HMI B.V. Italy
Pro-face America Inc.
Digital Electrpnics Corp.
Pro-face Corea Co., Ltd.
Pro-face taiwan Co., Ltd.
Pro-face HMI B.V.
Asia26
NorthAmerica
2
Oceania3
Europe31
G P S E R I E S
2 1
Programmable Operator Interfaces
32
bit
RIS
C C
PU
PO
WE
R
Item
Model
Type
Colors
Backlight
Resolution
Nominal Display Area
Attributes
Display Brightness Control
Contrast Control
Language fonts
No.ofChar
Display
8x8 dot font
8x16 dot font
16x16 dot font
Font sizes
Application Memory
Touch Panel (Resistive Film)
Serial
Interfaces
Tool Connector
Auxiliary Input/Output (AUX)
Printer Output
GP577R-TC11GP577R-TC41-24VP GP577R-SC11 GP477R-EG11
GP477R-EG41-24VPGP377R-TC11-24VGP377R-TC41-24V
GP377-SC11-24VGP377-SC41-24V
GP377-LG11-24VGP377-LG41-24V
TFT Color LCD STN Color LCD High Intensity EL TFT Color LCD STN Color LCD Monochrome LCD
64 colors (Tiling patterns make blends of colors possible) Amber 64 colors (Tiling patterns make blends of colors possible) black and white
CCFL (under normaltemperatures and humidity,
lifespan = more than40 000) User replacable
CCFL (under normaltemperatures and humidity,
lifespan = more than25 000) User replacable
_____
CCFL (under normaltemperatures and
humidity, lifespan =more than 50 000)
CCFL (under normal temperaturesand humidity, lifespan = more than
30 000) User replacable.
640 x 480 pixels 640 x 400 pixels 320 x 240 pixels
211.2 mm (W) x 158.4 mm (H) 192mm(W)x120mm(H) 115.2 mm (W) x 86.4 mm (H)
Blink / Reverse Video
4 levels (via touch panel) 2 levels (via touch panel) 4 levels (via touch panel)
_____ 8 levels (via touch panel) ____ 8 levels (via touch panel)ASCII: (Code Page 850) Alphanumeric (Incl. European fonts) *1
Chinese: (GB2321-80 codes) simpliefied Chinese fontsJapanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)
Korean: (KSC5601 - 1992 codes) Hangul fontTaiwanese: (Big 5 codes) traditional Chinese fonts
80 characters per row, 30 rows
40 characters per row, 30 rows
80 characters per row, 60 rows
80 characters per row, 25 rows
40 characters per row, 25 rows
80 characters per row, 50 rows
40 characters per row, 15 rows
20 characters per row, 15 rows
40 characters per row, 30 rows
Character size: Height and width can be expanded 1, 2, 4 or 8
2MB FLASH EPROM 1MB FLASH EPROM
32x24 Keys / screen; 1 or 2 point touch 32x20 Keys/screen;1or2 point touch 16x12 Keys / screen; 1 or 2 point touch
Asynchronous transmission method: RS-232C/ RS-422Data length: 8/7 bits; 2/1 bits; stop bits: 2/1 bits
Parity: None/ Even/ Odd; Data Transmission Rate: 2400 bps to 115.2 kbps
Asynchronous Transmission Method, TTL level, non-procedural command interface[during screen development] used for transferring application screen data
[during RUN mode] used as Bar-code Reader of built-in 2-port function interface
Touch switch output(inching)System alarm outputBuzzer outputRun output
DC24Vx8 pointsDC24Vx1 pointDC24Vx1 pointDC24Vx1 point
____________
Conforms to Centronix (HP LaserJet PCL4 compatible, NEC PR Series, EPSON ESC/P or equivalent) ____________
Item Model GP377-SC11-24VGP377-SC41-24V
GP377-LG11-24VGP377-LG41-24V
Electrical
Input voltage
Power Consumption
Allowable Voltage Drop
Voltage Endurance
Insulation ResistanceAmbient Operating
TemperatureAmbient Storage
Temperature
Ambient Humidity
EnvironmentalVibration Resistance
Noise Immunity(via noise simulator)
Atmosphere
Rating
Structural
ExternalDimensions
Weight
Cooling Method
AC85V to AC132V 50/60Hz DC20.4V to DC27.6V
50VA or less 50W or less (TVP 20W) 20W or less (TVP 13W)
Up to 20 ms Up to 2 ms
AC 1500V -20 mA 1 minute AC 1000V -10 mA 1 minute (between charging and FG terminals)
Above 10MW at DC500V (between charging and FG terminals) Above 10MW at DC500V(between charging and FG terminals)
Above 20MW at DC500V(between charging and FG terminals)
0ºC to 40ºC 0ºC to 50ºC 0ºC to 40ºC 0ºC to 50ºC 0ºC to 40ºC 0ºC to 50ºC
-10ºC to 60ºC -20ºC to 60ºC
30 to 85% RH(non-condensing)
20 to 85% RH(non-condensing)
30 to 85% RH(non-condensing)
20 to 85% RH(non-condensing)
10 to 25 Hz (X, Y, Z directions 30 minutes each 2G)
Noise voltage: 1200Vp-pPulse length: 1 µs; Arise Time: 1ns
Noise voltage: 1000Vp-pPulse length: 1 µs; Arise Time: 1ns
Must not contain corrosive gas
Equivalent to IP65f (Limited to front face of GP installed in panel)317mm(W)x243mm(H)
x85mm(D)(GP unit only)
274mm(W)x216mm(H)x56.5Dmm(D)(GP unit only)
317mm(W)x243mm(H)x85Dmm(D)(GP unit only)
274mm(W)x216mm(H)x56.5Dmm(D)(GP unit only)
171mm(W)x138mm(H)x57mm(D)(GP unit only)
Less than 3.5 kg (GP unit only) Less than 2.5kg(GP unit only)
Less than 3.5kg(GP unit only)
Less than 2.5kg(GP unit only) Less than 0.95 kg (GP unit only)
Natural air circulation*1 Japanese character input requires the Japanese version screen editor software.
GP577R-TC11 GP577R-SC11 GP477R-EG11 GP577R-TC41-24VP GP477R-EG41-24VP GP377R-TC11-24VGP377R-TC41-24V
Functional Specifications (GP77 Series Units)
General Specifications
G P S E R I E S
2 2
Programmable Operator Interfaces
Items Model GP570-TV11 GP675-TC11GP675-TC41-24VP GP675-SC11
Type
Colors
Backlight
Resolution
Nominal Display Area
Features
Contrast Adjustment
Language Fonts
Display
No. ofChar.
Display
8 x 8 dot font
8 x 16 dot font
16 x 16 dot font
Font sizes
Application Memory
Touch Panel (Resistive Film)
Interface
Serial
Tool Connector
Auxiliary Input / Output (AUX)
Printer Output
TFT Color LCD STN Color LCD8 colors (white, red, blue, green, yellow, purple, light blue, black)Tiling patterns make blends of colors possible 64 colors (Tiling patterns make blends of colors possible)
CCFL (under normal temperaturesand humidity, lifespan = 20 000
hours) User replacable
CCFL (under normal temperaturesand humidity, lifespan = 25 000
hours) User replacable
CCFL (under normal temperaturesand humidity, lifespan = 25 000hours) Non-replacable by user
640x480 pixels 800x600 pixels
211mm(W)x158mm(H) 246mm(W)x184.5mm(H)
Blank / Reverse Video
____ 8 levels from touch panelASCII: (Code page 850) Alphanumeric (Incl. European fonts) *1
Chinese: (GB2321-80 codes) simplified Chinese fontsJapanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & ?)
Korean: (KSC5601 - 1992 codes) Hangul fontTaiwanese: (Big 5 codes) Traditional Chinese fonts
80 characters per row, 60 rows
80 characters per row, 30 rows
40 characters per row, 30 rows
100 characters per row, 75 rows
100 characters per row, 37 rows
50 characters per row, 37 rows
Character size: Height and Width can be expanded 1, 2, 4 or 8 times
1MB FLASH EPROM 2MB FLASH EPROM32x24 keys / screen;
1 or 2 point touch 40x50 keys / screen; 1 or 2 point touchAcynchronous transmission method: RS-232C/ RS-422; Data length: 8/7 bits; stop bits: 2/1 bits;
Parity: None/ Even/ Odd; Data Transmission Rate: 2400 to 38400 bpsAsynchronous Transmission Method, TTL level, non-procedure command interface
<during screen development> used for downloading application screens<during RUN mode> used as Bar-code Reader interface
Touch Switch Output: DC24Vx8 points; System Alarm Output: DC24Vx1 point; Buzzer Output: DC24Vx 1 pointRUN output: DC24Vx1 point; Remote Reset Input: DC24Vx1 point
Conforms to Centronix (HP LaserJet PCL4 compatible, NEC PR Series, EPSON ESC/P or equivalent)
Items Model GP570-TV11
Input Voltage
GP675-TC11GP675-TC41-24VP GP675-SC11
Power Consumption
Allowable Voltage Drop
Voltage Endurance
Insulation Resistance
Operation Temperature
Storage Temperature
Ambient Humidity
Electrical
Environ-mental Vibration Resistance
Noise Immunity(via noise simulator)
Atmosphere
Rating
Structural
External Dimensions
Weight
Cooling Method
AC85 to AC132V 50/60 Hz GP675-TC11: AC85 to AC132V 50/60 HzGP675-TC41: DC19.2V to DC28.8V AC85 to AC132V 50/60 Hz
50VA or less
Up to 20msAC1500V 20mA 1 minute
(between changing and FG terminals)
GP675-TC11: 50W or lessGP675-TC41: 50VA or lessGP675-TC11: Up to 20 msGP675-TC41: Up to 2 ms
GP675-TC11: AC1500V 20mA 1minuteGP675-TC41: AC1000V 10mA 1 minute
(between charging and FG terminals)
50VA or less
Up to 20msAC1500V 20mA 1minute
(between changing and FG terminals)
Above 10MW at DC500V (between changing and FG terminals)
0ºC to 40ºC
-10ºC to 60ºC
30 to 85% RH (non-condensing)
10 to 25 Hz (X, Y, Z directions 30 minutes 2G)
Noise voltage: 1200Vp-p(GP675-TC41: 1000Vp-p) Pulse length: 1 µs Arise time: 1 ns
Must not contains corrosive gas
Equivalent to IP65f (Limited to front face of GP installed in panel)
317mm(W)x243mm(H)x85mm(D) (GP only) 346mm(W)x272mm(H)x81mm(D) (GP only)
Less than 3.5 kg (GP only) Less than 3.8 kg (GP only)
Natural Air Circulation
Items Model GP570-TV11
Display Colors 32768 colors
VideoDisplay
Input ChannelsTransmission Method
Number of Video ScreensColor Control
Special FeaturesInput Signal Method
Input SignalCharacteristics
Synchronous SignalScanning Type
FlickerBrightnessAdjustment
Controls Horizontal Display PositioningVertical Display Positioning
ResolutionDot-clock Range
3 channelsNTSC
1 (size, location and channel are adjustable)tone, brightness anc contrast
still (freezes video display), transparent color settings, and zoomAnalog RGB
TTL level, negative true or positive trueNon-interlaced
8 level4 level
-16 to 15 pixels-8 to 7 pixels
640x480 pixels25.175 MHz +/- 1%
* Japanese character input require the Japanese version screen editor software
Functional Specifications (10.4" and 12.1" Display)
General Specifications
VM Display Specifications
G P S E R I E S
2 3
Programmable Operator Interfaces
32
bit
RIS
C C
PU
PO
WE
R
Items Model GP571-TC11
Type TFT Color LCD
GP570-TC** GP-570-SC** GP570-LG** GP470-EG**
Color
Backlight
Resolution
Nominal Display Area
Features
DisplayFunctions
Brightness Control
Contrast Control
Language Fonts
No. ofChar.
Display
8 x 8 dot font
8 x 16 dot font
16 x 16 dot font
Font Size
Application Memory
Touch Panel (Resistive Film)
Interfaces
Serial
Tool Connector
Auxiliary Input / Output (AUX)
Printer Output
STN Color LCD Monochrome LCD High Intensity EL
64 colors (Tiling patterns makeblends of colors possible)
8 colors (white, red, blue, green, yellow, purple, light blue, black)(Tiling patterns make blends of colors possible) black and white Amber (monochrome)
CCFL (under normal temperatures and humidity, lifespan - 20 000 hours) *1User replacable
CCFL (under normal temperaturesand humidity, lifespan - 25 000hours) Non-replacable by user
____
640 x 480 pixels 640 x 400 pixels
211mm(W)x158mm(H) 192mm(W)x120mm(H)
Blink / Reverse Video
____ 2 levels from touch panel
____ 8 levels from touch panel
ASCII: (Code Page 850) Alphanumeric (incl. European fonts) *1Chinese: (GB2321 - 80 codes) simplified Chinese fonts
Japanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)Korean: (KSC5601 - 1992 codes) Hangul font
Taiwanese: (Big 5 codes) traditional Chinese fonts
80 characters per row, 60 rows 80 characters per row, 50 rows
80 characters per row, 30 rows ?0 characters per row, 25 rows
40 characters per row, 30 rows 40 characters per row, 25 rows
Character Size: Height and Width can be expanded 1, 2, 4 or 8 times
3MB FLASH EPROM 1MB FLASH EPROM
32 x 24 keys / screen: 1 or 2 point touch 32x20 keys / screen;1 or 2 point touch
Asynchronous transmission method: RS-232C/ RS-422; Data length: 8/7 bits; stop bits: 2/1 bits;Parity: None/ Even/ Odd; Data Transmission Rate: 2400 to 38400
Asynchronous Transmission Method, TTL level, non-procedure command interface<during screen development> used for downloading application screens
<during RUN mode> used as Bar-code Reader interfaceTouch Switch Output: DC24Vx8points; System Alarm Output: DC24Vx1point; Buzzer Output: DC24Vx1point
RUN Output: DC24Vx1point; Remote Reset Input: DC24Vx1point
Conforms to Centronix (HP LaserJet PCL4 compatible, NEC PR Series, EPSON ESC/P or equivalent)
Items Model
Input Voltage AC85 to AC132V 50/60Hz
Power Consuption
Electrical Allowable Voltage Drop
Voltage Endurance
Insulation Resistance
EnvironmentalSpecifications
Operation Temperature
Storage Temperature
Ambient Humidity
Vibration Endurance
Noise Endurance
Atmosphere
Rating
StructuralSpecifications
External Dimensions (mm)
Weight
Cooling System
GP571-TC11 GP570-TC** GP570-SC** GP570-LG** GP470-EG**
GP570-*C11: AC85 to AC132V 50/60HzGP-570-*C21/ *C31: DC19.2 to DC28.8V DC19.2V toDC28.8V GP470-EG11: AC85 to AC132V 50/60Hz
GP470-EG21/ EG31: DC19.2 to DC28.8V
50VA or less GP570-*C11: 50VA or lessGP-570-*C21/ *C31: 50W or less 50W or less GP470-EG11: 50VA or less
GP470-EG21/ EG31: 50W or less
Up to 20ms GP570-*C11: Up to 20msGP-570-*C21/ *C31: Up to 2ms Up to 2ms GP470-EG11: Up to 20ms
GP470-EG21/ EG31: Up to 2msAC1500V 20mA 1minute(between changing and
FG terminals)
GP570-*C11: AC1500V 20mA 1minuteGP-570-*C21/ *C31: AC1000V 10mA 1 minute
(between changing and FG terminals)AC1000
GP470-EG11: AC1500V 20mA 1 minuteGP470-EG2124VP/ EG31-24VP:
AC1000V 10mA 1 minute(between charging and FG terminals)
Above 10MW at DC500V (between the wire and ground terminals)
0ºC to 40ºC 0ºC to 50ºC
-10ºC to 60ºC
30 to 85% RH (non-condensing) 20 to 85% RH (non-condensing)
10 to 25 Hz (X, Y, Z directions 30 minutes 2G)
Noise voltage: 1200Vp-p;Pulse length: 1µs;Arise Time: 1ns
Noise voltage: GP570-*C11: 1200Vp-p.GP570-*C21-24VP/ *C31-24VP: 1000Vp-p
Pulse length: 1µs; Arise Time: 1ns
Noise voltage: 1000Vp-p;Pulse length: 1µs;Arise Time: 1ns
Noise voltage: GP470-EG11: 1200Vp-p.GP470-EG21-24VP/ EG31-24VP: 1000Vp-p;
Pulse length: 1µs; Arise Time: 1ns
Must not contain corrosive gas
Equivalent to IP65f (Limited to front base of GP installed in panel)
317mm(W)x243mm(H)x85mm(D) (GP only)274mm(W)x216mm(H)
x56.5mm(D)(GP only)
Less than 3.5 kg (GP only) Less than 2.5 kg (GP only)
Natural Air Circulation
1) With GP570-TC21-24VP units that are Rev. E or later, the estimated lifetime of the backlight is 40 000 hours (assuming 24 hour operation). 2) Japanese character input require the Japanese version screen editor software
____
Functional Specifications
General Specifications
G P S E R I E S
2 4
Programmable Operator Interfaces
Items Model GP370-SC**-24V*
STN Color LCD
GP370-LG**-24V* GP270-SC**-24V* GP270-SC**-24V* GPH70-SC**-24V GPH70-LG**-24V
DisplayFunctions
No. ofChar.
Display
8 x 8 dot font
8 x 16 dot font
16 x 16 dot font
Application Memory
Touch Panel (Resistive Film)
Function Keys
Interfaces
Type
Color
Backlight
Resolution
Nominal Display Area
Features
Brightness Control
Contrast Control
Language Fonts
Font Size
Operation Switches
Push Button Switch
Serial
Tool Connector
External Outputs
Monochrome LCD STN Color LCD Monochrome LCD STN Color LCD Monochrome LCD
8 colors (white, red, blue,green, yellow, purple, light blue,
black) Tiling patterns makeblends of colors possible
black and white
8 colors (white, red, blue,green, yellow, purple, light blue,
black) Tiling patterns makeblends of colors possible
black and white
8 colors (white, red, blue,green, yellow, purple, light blue,
black) Tiling patterns makeblends of colors possible
black and white
CCFL (under normal temperatures and humidity, lifespan = 20 000 hours)User replacable
CCFL (under normal temperaturesand humidity, lifespan = 25 000hours) Non-replacable by user
320 x 240 pixels
115mm(W)x86mm(H) 96mm(W)x72mm(H) 115mm(W)x86mm(H)
Blink / Reverse Video
2 levels from touch panel __________
8 levels from touch panel
ASCII: (Code Page 850) Alphanumeric (incl. European fonts) *1Chinese: (GB2321 - 80 codes) simplified Chinese fonts
Japanese: ANK 158 type, Kanji: 6962 (Standard JIS Type 1 & 2)Korean: (KSC5601 - 1992 codes) Hangul font
Taiwanese: (Big 5 codes) traditional Chinese fonts
40 characters per row, 30 rows
40 characters per row, 15 rows
20 characters per row, 15 rows
Character Size: Height and Width can be expanded 1, 2, 4 or 8 times
1MB FLASH EPROM 256KB FLASH EPROM 1MB FLASH EPROM
16x12 keys/screen; 1 or 2 point touch
__________
__________
__________
__________
12
One is located on the back of the case; the otheris the front face's function swithc (OP.) key
Push-Lock (E-Stop) type switch
Asynchronous transmission method: RS-232C/ RS-422; Data length: 8/7 bits; stop bits: 2/1 bits;Parity: None/ Even/ Odd; Data Transmission Rate: 2400-38400 bps
RS-232C Acynchronous Transmission Method, TTL level, non-procedure command interface<during screen development> used for downloading application screens
<during RUN mode> used as Bar-code Reader interfaceDOUT: Two-point Open Controller: 5-24VDC, 50mA max
OP: One-point Controller: 5-24VDC, 50mA maxBuzzer: One-point Controller: 5-24VDC, 0.1-0.3A
Push-Lock Switch: Single B-contact, rated 30VDC, 0.3A
Items Model
DC20.4V to DC27.6V
GP370-SC**-24V* GP370-LG**-24V* GP270-SC**-24V* GP270-SC**-24V* GPH70-SC**-24V GPH70-LG**-24V
Electrical
EnvironmentalSpecifiactions
StructuralSpecifications
Input Voltage
Power Consumption
Allowable Voltage Drop
Voltage Endurance
Insulation Resistance
Operation Temperature
Storage Temperature
Ambient Humidity
Vibration Endurance
Noise Endurance
Atmosphere
Rating
External Dimensions (mm)
Weight
Cooling System
20W or less (TYP10W) 12W or less (TYP8W) 12W or less (TYP10W)
Up to 2ms
AC1000V 10mA 1 minute (between the live wire and ground terminals) *2
Above 20MW at DC500V (between the live wire and ground terminals)
0ºC to 60ºC 0ºC to 40ºC
-20ºC to 60ºC
20 to 85% RH (non-condensing)
10 to 25 Hz (X, Y, Z dimensions 30 minutes 2G)
Noise voltage: 1000Vp-pPulse length: 1µsArise time: 1ns
Must not contain corrosive gas
Equivalent to IP65f (Limited to front face of GP installed in panel) Equivalent to IP63
171mm(W)x138mm(H)x57mm(D) (GP only) 172mm(W)x127mm(H)x58mm(D) (GP only) 237mm(W)x173mm(H)x52mm(D) (GP only)
Less than 0.9 kg (GP only) Less than 0.8 kg (GP only) Less than 0.87 kg (GP only)
Natural Air Circulation
*1 Japanese character input require the Japanese version screen editor software*2 With GPH70-**41-24V untits, the allowable power failure is AC500V, 10mA for 1 minute
Functional Spetifications (Medium Size Display Units)
General Specifications
G P S E R I E S
2 5
Programmable Operator Interfaces
32
bit
RIS
C C
PU
PO
WE
R
Optional Items
Item
Item
Item
Item
Item
Item
Item
Catalogcode
Catalogcode
Catalogcode
Catalogcode
Catalogcode
Catalogcode
Catalogcode
Screen Editor SoftwareGP-PRO/PB|||for Windows
2-Way Comunicator Pro-Server withPro-Studiofor Windows
Data Transfer Cable Memory Loader ||(Memory card included)
for PLC commimicationRS-232C Cable (5m)
for PLC commimicationRS-422 Cable (5m)
for GP-H70 SeriesRS-232C Cable (3m)
for GP-H70 SeriesRS-422 Cable (3m)
userful for multi-link connectionRS-422 ConnectorTerminal Exchange Adapter
for easy debuggingMitsubishi PLCA Series/QnA SeriesFX Series2 Port Adapter ||
RS-422 Cablefor 2 Port Adapter ||
direct connection to programming portMitsubishi A Series PLCProgramming I/FCable (5m)
direct connection to programming portMitsubishi FX Series PLCProgramming I/FCable (5m)
direct connection to programming portSiemens S5 Series PLCProgramming I/FCable (5m)
connector typeRS-232C Cablefor GP-H70Series WithD-SUBconnector (3m)
for GP-H70RS-232CConversionAdapter
connector typeRS-422 Cablefor GP-H70Series WithD-SUBconnector (3m)
for GP-H70RS-422ConversionAdapter
CF Card CF Card Front Maintenance Unit Protective Screen Cover
Cover Sheets Backlight Bulbs User's Manual
GPW-PB01M-V40
GP410-IS00-O(some PLCs require a different cable)
PSW-ED01-V20 GPW-CB02 GP070-LD-O
GPH70-C422-OGPH70-C232-OGP320-IS11-OGP23--IS12-O (For Multi-link)
GP070-CN10-O GP070-MD11 GP070-MDCB11
GP000-IS11-OGP430-IP11-OGP430-IP10-O
GPH70-D232 GPH70-AP232-O GPH70-D422 GPH70-AP422-O
GP370-DC10GP070-CFFM10(Under development)
GP077-CF10 (8MB)GP077-CF20 (16MB)
Soft Type Hard Type10 sheets / set 5 sheets / setGP570-COVER-10P GP675-DF10-OGP470-COVER-10P GP570-DF10-OGP570/577-COVER-10P GP470-DF10-OGP470/477-COVER-10P GP570/577-DF10 GP470/477-DF1020 sheets / set 10 sheets / setGP370-COVER-20P GP370-DF10-OGP270-COVER-20P GP270-DF10-O GPH70-DF10-O
GP675S-BL00-MSGP675T-BL10-MSGP570-BL00-MS *1
GP577RT-BL00-MSGP370-BL00-MSGP270-BL00-MS
*1 With GP570-TC21-24VP units that are Rev. E or later, use backlight model: GP577RT-BL00-MS
GP-H70(S/L) GPH70-MM11-STD-ENGGP-270(S/L) GP270-MM11-ENGGP-370(S/L) GP370-MM11-ENGGP-470E GP470/570-MM21-ENGGP-570(T/S/L) GP470/570-MM21-ENGGP-571T GP470/570-MM21-ENGGP-675T GP675-MM21-ENGGP-477R/577R GP477R/577R-MM11-ENGGP-377R GP377R-MM11-ENGGP-377(S/L) GP377-MM11-ENG
G P S E R I E S
2 6
Programmable Operator Interfaces
Operation Enviroment for Software
External Dimensions (mm)
PC
OS Version
Memory
Disk Space
Mouse
Printer
PC
OS Version
Memory
Disk Space
Mouse
Printer
Ethernet
Protocol
Others
IBM Compatible
MS-Windows 95/98/NT
16MB, or higer
30MB minimum
53MB maximum *1
Windows 95/98/NT compatible
Windows 95/98/NT compatible *2
GP-PRO/PB||| Windows Pro-Server with Pro-StudioIBM Compatible
MS-Windows 95/98/NT
16MB, or higer
10MB or higer
Windows 95/98/NT compatible
Windows 95/98/NT compatible
10BASE-2/5T
TCP/IP
Ethernet Hub, Ethernet cable
GP-675GP-675S
GP-577RTGP-577RS
GP-571TGP-570VMGP-570TGP-570SGP-570L
GP-477REGP-470E
GP-377RTGP-377SGP-377L
GP-377SGP-370L
GP-270SGP-270L
GP-H70SGP-H70L
331.0(top)
3467.5 81
272
275
(front) (side)
Panel Cut-out
(front) (side)
Panel Cut-out
(front) (side)
Panel Cut-out
(front) (side)(front) (side)
Panel Cut-out
(front) (side)
Panel Cut-out
under 4-R2
259 +1-0
123.
5+1-0
(top)
258
274
216
7.556.5
200
under 4-R2
259+1
-0
201+1
-011
3+0.5
-0
158+0.5-0
under 4-R3
112.
5
585
172
157.5
127
(top) (top)
52
237 MAX68
173
(top)155.5
171
138
557
123.
0
under 4-R3
156+1-0
123.
5
301
(top)
317
243
857.5
227
302+0.5-0.5
228+0
.5-0
.5
under 4-R2
*1 40MB maximum for CD-ROM version
*1 Printers with only Windows drivers cannot be used.
POB 38 FIN-00371 Helsinki, Finlandph. int. +358-9-540 4940fax int. +358-9-541 3541e-mail: [email protected] : www.klinkmann.com
Panel Computer PL SeriesIBM Compatible Industrial Panel Computers
PL-B900 Ñåðèÿ
PL-3700S
PL-X900 ÑåðèÿPL-6700 Ñåðèÿ
PL-5700 Ñåðèÿ
Flat Panel DisplayFP SeriesPanel Displays that can replace your CRT, keyboardand mouse, and save valuable space
FP-570TÄèñïëåé VGA
FP-770T/FP-775SÄèñïëåé XGA
Graphic Logic ControllerGLC SeriesProgrammable Operator Interface with I/Ocontrol features.
GLC300T
GLC100 Ñåðèÿ
Pro-Control ðåäàêòîð
Graphic Panel GP SeriesProgrammable Operator Interface for Industrial Controllers
GP77R ñåðèÿ100 MHz RISC CPU è2 ñïîñîáà ïîäêëþ÷åíèÿ ê ñåòè
GP70 ñåðèÿ32 áèò RISC CPU
GP-PRO/PB IIIÄëÿ WindowsÝêðàííûé ðåäàêòîð
The Family-HMI yhat you can count on
Klinkmann - total solution for HMIWonderware InTouch is with 150.000installations world leading HMI/SCADA PCsoftware. InTouch is part of WonderwareFactorySuite , which offers also IndustrialSQL Server automation database,SuiteVoyager automation internet portal,Terminal erver thin client server, InControlSoftPLC etc.
Klinkmann's development develop interfaceand wireless automation software forvarious automation devices incl.Siemens, ABB, Profibus, Interbus and thernet. Klinkmann software is used inover 60 countries araound the world.