3 Transformer Room (1)

8/13/2019 3 Transformer Room (1)

1/30

AS PER B.O.Q AS PER EXECUTED

TOTAL AMOUNT TOTAL AMOUNT

2 Site Work 1,675.250 100.00% 1,675.250

3 Concrete 4,012.500 100.00% 4,012.500

4 Masonry 414.000 100.00% 414.000

5 Metal 140.000 100.00% 140.000

7 Thermal and Moisture Protection #REF! #REF! 890.350

8 Doors and Windows 0.000 #DIV/0! 1,200.000

9 Finishes 1,431.250 100.00% 1,431.250

15 Mechanical 3,284.250 100.00% 3,284.250

16 Electrical 17,681.000 100.00% 17,681.000

Grand Total #REF! #REF! 30,728.600

Amount in

words:Thirty Thousand Seven Hundred Twenty Eight & Sixty Fills& Only

SUMMARY TRANSFORMER ROOM

PAGE NO. DIVISION NO.


2/30

TRANSFORMER ROOM- /......

UNIT RATE AMOUNTC

KD. FILS KD. FILS K

DIVISION - 2SITE WORK

Section 02110

Demolition & Site preparations

2.1 Site cleaning including demolition of any

existing structure until the foundations with

removing the foundations and all debris

within the working space as per requirementand engineer's approval including cleaning

and grading of soil and excavated material

to distance approved by municipality and

Filling with lean concrete if reach more than

the approved level.

L.S L.S 1000 1000.000 100.00% 100.00%

Section 02222

Excavation for Building

2.2 Excavation mechanically/manually in any

type of soil up to the required height

including removing any obstruction during

excavation and removal of surplus

excavation material from site.

2.2.1 Excavation starting from N.G.L. to the

foundation bed.62 M3 1.5 93.000 100.00% 100.00%

Section 02223

Filling & Back Filling

2.3 Filling and back filling with approved clear

sand/soil for excavated area of building. All

complete as per drawings and

specifications. Filling shall be compacted in

layers ( not more than 25 cm thick each)

and compaction shall not be less than 98%

dry density.

47 M3 1.75 82.250 100.00% 100.00%

Section 02280

Termite Control

2.4 Termite Control/Soil treatment for the whole

building all as described.L.S L.S 500 500.000 100.00% 100.00%

1,675.250

CARRIED TO COLLECTION

ITEM DESCRIPTION QTYPREVIOUS

MONTH %

COMP.

THIS

MONTH %

COMP.

UP TO

DATE %

COMP.

The Contractor is referred to the

specifications & drawings for all details

related to division of the works and he is to

include for complying with all the

requirements contained there in whether or

UNIT


3/30

TRANSFORMER ROOM-

UNIT RATE AMOUNT

KD. FILS KD. FILS

ITEM DESCRIPTION QTYPREVIOUS

MONTH %

COMP.

THIS

MONTH %

COMP.

UP TO

DATE %

COMP

UNIT

Note:

a The excavation, filling and back filling, sub-structure, including water proofing systems.

These quantities are based on bearing

capacity 1.5kg/cm2 exact quantity for each

site will depend on the recommendations of

soil investigation report for each site and

contractor must provides engineers with soil

investigations reports for site.

b During execution of Site Work and

excavation if any external services require

protection, diversions / re-routing including

any modification there to. The Contractor

shall implement such works as per statutory

authorities and Engineer's approval and thecost of such work is deemed to be included

in the Contractor's Price.



4/30


5/30

TRANSFORMER ROOM- ......

UNIT RATE AMOUNT

KD. FILS KD. FILS

DIVISION - 3

CONCRETE

Section 03300 Cast-in-Place Concrete

Plain Concrete - Grade K-150

3.1

Plain concrete using sulphate resisting

cement including form work and all other

3.1.1 10 cm thick under Footing 31 M2 3.500 108.500 0.00% 100.00% 100.00%

3.1.2 5 cm thick under G.B. 12 M2 2.000 24.000 0.00% 100.00% 100.00%

3.1.3 5 cm thick Sand Cement Screed under Footin 31 M2 2.000 62.000 0.00% 100.00% 100.00%

Reinforced Concrete

3.2 -

sulphate resisting cement filled into

formwork and tamped around reinforcement

including all watertight formwork, tie bolts

and reinforcement, all complete as per

3.2.1 R.C. Footings 16 M3 67.000 1072.000 0.00% 100.00% 100.00%

3.2.2 R.C. slab-on-grade 8 M3 72.000 576.000 0.00% 100.00% 100.00%

3.2.3 R.C. Ground Beam 5 M3 87.000 435.000 0.00% 100.00% 100.00%

3.2.3 R.C. Trance wall 4 M3 90.000 360.000 0.00% 100.00% 100.00%

3.2.4 R.C. Neck Columns 1 M3 93.000 93.000 0.00% 100.00% 100.00%

3.3 Reinforced concrete Grade K-300 using

ordinary Portland cement filled into

formwork and tamped around reinforcement

including all formwork and reinforcement

(fair finished on all exposed faced) Or

Preferred Column, Beams & Slabs to be

3.3.1 R.C. Columns 4 M3 90.000 360.000 0.00% 100.00% 100.00%

3.3.2 R.C. beams, parapet etc. 4 M3 87.000 348.000 0.00% 100.00% 100.00%

3.3.3 R.C. Suspended solid slabs 7 M3 82.000 574.000 0.00% 100.00% 100.00%

4,012.500

The Contractor is referred to the

specifications & drawings for all details

related to division of the works and he is to

include for complying with all the

requirements contained there in whether or

UP TO

DATE %

COMP.

PREVIOUS

MONTH %

COMP.

THIS

MONTH %

COMP.

ITEM DESCRIPTION QTY UNIT



6/30

TRANSFORMER ROOM-

DIVISION - 3

CONCRETE

COLLECTION

1 TOTAL OF PAGE (3-1) 4012.500

4,012.500CARRIED TO SUMMARY


7/30

TRANSFORMER ROOM-

UNIT RATE AMOUNT

KD. FILS KD. FILS

DIVISION - 4

MASONRY

Section 04200

Masonry

4.1. Non load bearing solid concrete block work,

duly bedded in cement and sand mortar

including R.C. lintel, head fixing, curing,

scaffolding to any height galvanized steel

ties etc. and all works complete as per

4.1.1 200 mm thick block wall 92 M2 4.500 414.000 0.00% 100.00% 1

PREVIOUS

MONTH %

COMP.

THIS

MONTH %

COMP.



8/30

TRANSFORMER ROOM-

DIVISION - 4

MASONRY

COLLECTION

1 TOTAL OF PAGE (4-1) 414.000

414.000CARRIED TO SUMMARY


9/30

TRANSFORMER ROOM-

UNIT RATE AMOUNT

KD. FILS KD. FILS

DIVISION - 5

METAL

Section 05500

Metal Fabrication

Chequered Plate

5.1 Galvanized steel chequer plate over

Substation trance, 4 mm thickness, fitting,

fixing with angle iron frame in position, all

complete as per Manufacturer's / Engineer's

instruction.

7 M2 20.000 140.000 0.00% 100.00% 1

PREVIOUS

MONTH %

COMP.

THIS

MONTH %

COMP.



10/30

TRANSFORMER ROOM-

DIVISION - 5

METAL

COLLECTION

1 TOTAL OF PAGE (5-1) 140.000



11/30

TRANSFORMER ROOM- ......

UNIT RATE AMOUNT

KD. FILS KD. FILS

DIVISION - 7

THERMAL AND MOISTURE PROTECTION

Section 071007.1 Waterproofing System

7.1.1 Protective membrane laid under footin s. 32 M2 2.250 72.000 0.00% 100.00% 100.00%

7.1.2 Footin surface and neck columns 81 M2 0.350 28.350 0.00% 100.00% 100.00%

7.1.3 Water proofing for G.B 30 M2 2.500 75.000 0.00% 100.00% 100.00%

See the note in page (2-1)

7.2 Supply and use polyethylene sheets (1000

gauge) under slab-on-grade, all complete as

39 M2 2.000 78.000 0.00% 100.00% 100.00%

Section 07500

Membrane Roofing

composite Roofing System

7.3 Roof treatment with roofing layers laid over

R.C. roof as per drawings, specifications

and manufacturer's instructions.

7.3.1 2 coats of waterproofing paint 49 M2 13.000 637.000 0.00% 100.00% 100.00%

5:15 cm thick foam concrete laid in slope

2 cm thick sand-cemnt screed smoothing layer

4 mm thick waterproofing membrane 2 layers

2 cm thick sand-cemnt screed

7.5 cm thick extruded rigid insulation (joints

shall be covered with tape)Filter fabric

40x40x4 cm Precast concrete (loosely laid)

tiles with 5 cm thick sand bed including 10

cm width mix aggregates around tiles laid

recessed with parapet and including

expansion joint filled with

celotex/rubber/mastic/ sealant / aluminum

flashing etc. all as per drawings,

All required flashing mastic/sealant between

parapet and skirting all as per detail

890.350

PREVIOUS

MONTH %

COMP.

THIS

MONTH %

COMP.

UP TO

DATE %

COMP.




12/30

TRANSFORMER ROOM-

DIVISION - 7

THERMAL AND MOISTURE PROTECTION

COLLECTION

1 TOTAL OF PAGE (7-1) 890.350



13/30

TRANSFORMER ROOM-

UNIT RATE AMOUNT

KD. FILS KD. FILS

DIVISION - 8

DOORS AND WINDOWS

Section 08110

Steel Doors and Frames

8.1 Steel frame with 3mm thick steel panel both

side claded hollow steel door fixing to

concrete or block wall complete with glazing,

painting, all hardware (hinges, tower bolt,

door lock, door closer etc.). The Contractor

should refer Hardware Schedule Section

08711 and Finish Hardware Section 08710

in Specifications and drawings, showing

8.1.1 Steel door double leaf, size 2750x2750mm

Type D12 Nos. 600.000 1200.000 0.00% 100.00% 100.0

1 200 000

PREVIOUS

MONTH %

COMP.

THIS

MONTH %

COMP.

UP T

DATE

COM




14/30

TRANSFORMER ROOM-

DIVISION - 8

DOORS AND WINDOWS

COLLECTION

1 TOTAL OF PAGE (8-1) 1200.000



15/30

TRANSFORMER ROOM- ..

UNIT RATE AMOUNT

KD. FILS KD. FILS

DIVISION - 9FINISHES

Secton 09200

Lath and Plaster

9.1 Render and set in cement plaster, 2 cm

thick to internal / external wall and ceiling

(concrete or block wall), including under

coat, metal lathe, corner beads, stop beads

etc. complete as per drawings and

280 M2 2.150 602.000 0.00% 100.00% 100.00%

Section 09400Terrazzo Tile

9.2 Precast Terrazzo floor tile 30x30x3 cm

Grade-1 on and including cement and sand

setting bed and backing sand cushion, joints

grouted in white cement including grinding,

polishing etc. complete as described.

35 M2 5.250 183.750 0.00% 100.00% 100.00%

9.3 2 cm thick x 10 cm high Terrazzo skirting on

and including cement and sand setting bed

and backing, joints grouted in white cement -

ditto.

32 MR 2.500 80.000 0.00% 100.00% 100.00%

Section 09900

Painting

9.4 Prepare and apply 2 coats of paint including

preparation of surfaces, under coat, seal

coat etc. complete as per specifications and

Manufacture's instructions.

9.4.1 Textured paint over plaster and fair face

concrete surfaces.113 M2 3.500 395.500 0.00% 100.00% 100.00%

9.4.2 Emulsion paint 170 M2 1.000 170.000 0.00% 100.00% 100.00%

1,431.250

PREVIOUS

MONTH %

COMP.

THIS

MONTH %

COMP.

UP TO

DATE %

COMP.




16/30

TRANSFORMER ROOM-

DIVISION - 9

FINISHES

COLLECTION

1 TOTAL OF PAGE (9-1) 1431.250



17/30

TRANSFORMER ROOM-

UNIT RATE AMOUNT

KD. FILS KD. FILS

INTERNAL WORKSMECHANICAL WORKS

FIRE FIGHTING SYSTEM

Supply and installation the following items as per

specifications and drawings complete in all respect,

including testing, commissioning and any related

work to complete the job in perfect condition for the

satisfaction of the Engineer.

15.1 2 Nos. 25 Kgs. Powder fire extinguisher with

trolle2 Nos. 350.000 700.000 0.00% 100.00% 100.0

in low tension room and transformer room

SUNDRIES

15.2 Documents includin drawin s o eratin L.S. L.S. included included

instructions and maintenance manuals.

15.3 Tools and s ares includin loose ke s L.S. L.S. included included

and consumable stores as er en ineerrecommendations.

Work incidental to the fire fighting

installation

15.4 Allow for co-ordination with other engineering L.S. L.S.

installations. included included

15.5 Allow for cutting or forming holes,mortise, L.S. L.S. 500.000 500.000 0.00% 100.00% 100.0

chases or the like and making good finishing

15.6 Supply and install all missing items, refer to L.S. L.S. included included

s ecifications and works needed.

PREVIOUS

MONTH %

COMP.

THIS

MONTH %

COMP.

UP TO

DATE

COM

ITEM DESCRIPTION QTY

UNIT


18/30

TRANSFORMER ROOM-

1,200.000

INTERNAL WORKSMECHANICAL WORKS

Supply and installation the following items as per

specifications and drawings complete in all respect,

including testing, commissioning and any relatedwork to complete the job in perfect condition for the

satisfaction of the Engineer.

STORM WATER

15.7 Rain water sus ended U.P.V.C. i esfittin s as er S ecifications and Drawin s,fixin with and includin all re uisiteand fixin devices includin oints.

15.7.1 3 inch diameter pipeL.S. L.S. 500.000 500.000 0.00% 100.00% 100.00

15.7.2 3 inch dia. Parapet roof drain1 Nos. 100.000 100.000 0.00% 100.00% 100.00

15.8 RAIN WATER PIPE WORK

15.8.1 3 inch diameter cast iron shoe1 Nos. 200.000 200.000 0.00% 100.00% 100.00

15.9 Su l and install all missin items, refer to L.S. L.S. included included


800.000




19/30

TRANSFORMER ROOM- ....../

DIVISION - 15 - MECHANICAL

HVAC

GENERAL NOTES

A. Contractor is responsible to get approvallocal authorities.

B. The HVAC system is a scheme contractorcheck all drawin s and do all ad ustmentsincluding complete with all discipline in orderget good performance of HVAC system

C. Include in quotation all catalogues formaterials and other in which rice based

HVAC System

15.10 An other item s not mentioned above and L.S. L.S. included included

necessary for the optimum operation of the

15.11 Allow for builders works required for all L.S. L.S. included included

works

15.12 Allow for two years maintenance L.S. L.S. included included

all HVAC equipments and system includingrovidin all re uired s are arts.

15.13 Allow for submitting as-built drawings, L.S. L.S. included included

o eration instruction and maintenanceetc.

Exhaust Fans

15.14 Exhaust roof extractor centrifu al t ewith fan electric motor casin housin theflanges back draft damper, vibration isolatross rin t e inlet cones wire uards

panels and all accessorie as perdrawings.

15.14.1 E.F - 01 (3600 cfm) 1 No. 548.650 548.650 0.00% 100.00% 100.00% 54

548.650 54CARRIED TO COLLECTION


20/30


Duct Work

15.15 Galvanized sheet rectan ular/round ductfor su l return fresh air toilet exhaust etc.complete with supply, fabrication, installation,hanger, support, equipment connection, ductaccessories, sealant, air leakage tests etc.SMACNA s ecification and A/C drawin s.

15.15.1 USG (20) 130 Kg 0.700 91.000 0.00% 100.00% 100.00%

15.15.2 USG 22 70 Kg 0.680 47.600 0.00% 100.00% 100.00%

Duct Work Accessories

15.16 Motorized and manual volume control L.S. L.S. 500.000 500.000 0.00% 100.00% 100.00% 5

dam er fire dam er turnin vens etc. asand s ecified.

Air Outlets and Inlets

Air outlets and inlets, include an exhaust grill,

exhaust louver, door grill etc, complete asspecified and shown.

15.17 Exhaust air grill (EAG)

15.17.1 EAG 60x 18 1 No. 57.000 57.000 0.00% 100.00% 100.00%

15.17.2 EAG 24x 14 1 No. 40.000 40.000 0.00% 100.00% 100.00%

15.18 Elect. Type wall mounted thermostat for 1 No. included included

room fan c.w. sensor and all required

15.19 Su l and install all missin items refer to L.S. L.S. included included


735.600 7CARRIED TO COLLECTION


21/30

TRANSFORMER ROOM-

DIVISION - 15 - MECHANICAL

COLLECTION

1 TOTAL OF PAGE (15-1) 1200.000

2 TOTAL OF PAGE(15-2) 800.000

3 TOTAL OF PAGE(15-3) 548.650

4 TOTAL OF PAGE(15-4) 735.600



22/30


UNIT RATE AMOUNTA

CO

KD. FILS KD. FILS KD

16 GENERAL NOTES

include the supply of all materials and

equipment unless otherwise specified,

delivery to site, installations, connections,

testing, commissioning and making ready

for work complete with all necessary cables

wiring, earthing, conduits, draw and outlet

boxes, switches, push-buttons, KWHM,

cable trays, trenches, supply steel frames,

angles, beams, rods fixation etc. and all

necessary accessories and components for

All works shall be carried out according to

drawings, particular and generalspecifications, contract conditions, and to

the latest rules and regulations of M.E.W,

M.O.C., Kuwait Fire Brigade, and any other

concerned authorities, and as approved by

these authorities and approved by the

Engineering.

The contractor has the responsibility to

finalize work as per MEW approval on the

shop drawings and as built drawings without

extra cost implication on the owner side

services (architect, civil and mechanical

works) to finalize his work in a coordinated

the contractor has the responsibility to

fire alarm equipments in the substation to the

main fire alarm control panel located in the

building including all ducts, conduites, cables,

handholes, manholes and all requirements

accessories.

The contractor has the responsibility to

complete voltage drop calculations

the site conditions and exact locations and to

change the sizes of cables according to

the voltage drop calculation results without

cost implication on the owner side.

DIVISION 16 ELECTRICAL

PREVIOUS

MONTH %

COMP.

THIS

MONTH %

COMP.

UP TO

DATE %

COMP.




23/30

TRANSFORMER ROOM- ..

16.1Supply, install, connect, test and commission

the following Main Low Tension Pannel,

including all feeding cables, cable trays, ducts,

hand holes, man holes, and all accessories,

foundation, earthing, trenching, contract

drawings, MEW requirement and as per the

approval of the Engineer.

16.1.1 M.L.T.B. 1.00 No. 4700.00 4700.00 0.00% 100.00% 100.00%

16.2

upp y , ns a , connec , es an comm ss on

the following Main feeding cables including all its

cable trays, trenches, ducts, conduites,hand

holes, man holes, handholes,covers and all

requirements, accessories, foundation, earthing,

trenching, contract drawings, MEW requirement

and as per the approval of the Engineer.

16.2.1 4c/95mm2 cu/xlpe/swa/pvc feeding cable 20.00 mt 30.00 600.00 0.00% 100.00% 100.00%

from MLTP to MSB-01


from MLTP to MSB-02


from MLTP to MSB-03


from MLTP to MSB-04


from MLTP to MSB-AHU

16.2.6 3(4c/300mm2) cu/xlpe/swa/pvc feeding cable 20.00 mt 30.00 600.00 0.00% 100.00% 100.00%

from MLTP to MSB-CH/P


from MLTP to MSB-PUMP

16.2.8 (4c/16mm2) cu/xlpe/swa/pvc feeding cable 20.00 mt 30.00 600.00 0.00% 100.00% 100.00%

from MLTP to S/F-FFP-01


from MLTP to S/F-FFP-02


from MLTP to S/F-JFP


from MLTP to feeder pillar

16.3

Supply , install, connect, test and commission

the following distribution boards,switch fuses

including all feeding cables, cable trays, ducts,

handholes, wiring, accessories, foundation,

earthing, contract drawings, MEW requirement ,

general specifications and as per the approval of

16.3.1DB-SS

1.00 NO. 500.00 500.00 0.00% 100.00% 100.00%

16.3.2feeder pillar FP-01

1.00 NO. 2500.00 2500.00 0.00% 100.00% 100.00%

14,300.000

DIVISION 16 ELECTRICAL



24/30

TRANSFORMER ROOM- 16.4 supply, install, connect, fix, test and make

ready for work of all lighting fittings. , the price for

the following items shall be included the lighting

points to the respective DBS c/w Wiring ,Conduits

, Earthing,Switches, Push Button, Ceiling Rose

, Silicon Wire, and all accessories required as per

drawings, specifications and MEW regulations for

light fittings types shown on drawings the Contractor

should submit a sample of light fittings for approval

with all internal wiring, control gear and components.

The Contractor should submit the fixation way of light

fittings for approval, as arch. Requirements and

according to the type of ceiling.and as per approval of Engineer.

16.4.1 TYPE E 4.00 No. 50.00 200.00 0.00% 100.00%

16.4.2 TYPE E' 3.00 No. 20.00 60.00 0.00% 100.00%

16.4.3 TYPE K 2.00 No. 35.00 70.00 0.00% 100.00%

16.5 Supply, install and connect to the respective DBs, the following points including conduit wiring, draw

boxes, outlet boxes, face plates, trenching, earthing,

switches, accessories, cable, silicon wire, switches,

double pole switches and all requirements as specified

and as shown in drawing and as per the approval of

Engineer.

16.5.1 13 A 3 Pin Sw. Socket6.00 No. 30.00 180.00 0.00% 100.00%

16.5.2 20 A T.P.N. S/F -EF-01/DB-SS1.00 No. 35.00 35.00 0.00% 100.00%

16.5.3 20 A T.P.N. S/F -FOR MSU 1.00 No. 36.00 36.00 0.00% 100.00%

EARTHING SYSTEM16.6 Supply, install and connect complete earthing system

as per drawing, specification and MEW regulation any

addition earth electrodes needed shall be included1.00 L.S. 250.00 250.00 0.00% 100.00%

without extra cost.

SITE INFRA STRUCTURES&BUILDER

WORK

16.7

All necessary Builders Works, civil work,

foundations, trenching required for electrical

installation for transfromer room, LT room and

site layout. Including all under ground upvcconduits, manholes, handholes , covers

,warning tape, excavation , backfilling and all

accessories required for completion work as per

mew re ulations a rovals and en ineer

1.00 L.S. included included


25/30

TRANSFORMER ROOM-

FIRE ALARM SYSTEMS

16.8 Supply, install, connect, test and make ready for

complete addressable analogue fire alarm system

including conduits, wiring,

boxes draw boxes, terminal box and all components

and accessories to make the system ready for work asper the drawing, specifications, KFBD approval and

as per approval of Engineer. The contractor is

responsible to finalize the work according to any

changes of KFBD without any extra cost on

the owner side the system shall contain as a

minimum.

16.8.1 Optical Detector 2.00 No. 150.00 300.00 0.00% 100.00% 100.00%

16.8.2 Interfaces with AHU's 1.00 L.S. 100.00 100.00 0.00% 100.00% 100.00%

16.8.3 Interfaces with fire fighting system 1.00 L.S. 350.00 350.00 0.00% 100.00% 100.00%

16.8.4

Arranging to connect to main system and

getting approval of KFB for F.A installation

after completion

1.00 L.S. 300.00 300.00 0.00% 100.00% 100.00%

16.8.5 General Fire Alarm Bell suitable for 1.00 No. 1500.00 1500.00 0.00% 100.00% 100.00%

outdoor W/P

2,550.000CARRIED TO COLLECTION


26/30

TRANSFORMER ROOM- Collection - Electrical

TOTAL OF PAGE (16-1) 0.00

TOTAL OF PAGE (16-2) 14300.00

TOTAL OF PAGE (16-3) 831.00

TOTAL OF PAGE (16-4) 2550.00



27/30

Index of B.O.Q.

2 Site Work

3 Concrete

4 Masonry

5 Metal7 Thermal and Moisture Protection

8 Doors and Windows

9 Finishes

15 Mechanical

16 Electrical

Summary

Bill No. 3

INDEX OF BOQ

DIVISION

NO.TITLE


28/30


29/30

III-4/Index-1

2-1 to 2-2

3-1 to 3-2

4-1 to 4-2

5-1 to 5-27-1 to 7-2

8-1 to 8-2

9-1 to 9-2

15-1 to 15-5

16-1 to 16- 5

Sum-1

PAGE NO.


30/30

3 Transformer Room (1)

Documents

Transcript of 3 Transformer Room (1)