3 mat large-fragment

MEDICAL ADVANCED TECHNOLOGY

LARGE FRAGMENT INSTRUMENTS & STAINLESS STEEL IMPLANTS

BASIC INTRUMENT SET LARGE FRAGMENT

2 | MAT Medical Advanced Technology

MAT GmbH&Co.KG Œ 1253 revision: 02.03.3009 Friedrich-Wöhler-Str. 10 ; D-78576 Emmingen ; Tel.+49 7465 / 909 189

E-mail: [email protected] ; website: www.mat-medical.com ____________________________________________________________________________________________________________________________________________________________________________________

INSTRUCTIONS FOR USE 3. (GB) Warning: The implants described may only be used in combination with MAT products!

OSTEOSYNTHESIS – STEEL IMPLANTS

(Bone: Plates / Screws / Pins / Wires / Clips) non-sterile IMPLANT MATERIAL: Implants made from steel in accordance with ISO 5832 – 1 stainless steel ; ISO 5832 – 9 high nitrogen stainless steel

manufactured by MAT GmbH&Co.KG.

The surface of these implants is chemically passive: not magnetic.

These implants can be combined with the standardised material

provided that its composition lies within the analysis stipulated

in the ISO 5832 – 1 / ISO 5832 – 9 standard and the required specifications.

Material alloys with chrome-nickel (implant steel) components

can trigger a so-called chrome-nickel allergy by their nature; there are no

other known biocompatible hazards!

We would point out that implants only function correctly

if the following basic rules are observed:

- When selecting implants (bone: plates / screws / pins

wires / clips), care must be taken to choose the appropriate implants

on the basis of the weight and level of activity of the patient,

and the bone fracture to be treated. - Note that by making the correct choice of biomechanics the forces to

be transferred by the implants remain low. - Extreme deformation of the implants must be avoided; the cautious bending of

wires, plates and pins does not, however, lead to implant damage provided it is

done with sufficient care. - Repeated deformation should be avoided at all costs as it will fatigue the

implant material.

- The re-use of implants is absolutely forbidden

(single use). - We strongly advise you to inform patients of the advantages and disadvantages

of implants.

- Excessive strain as a result of body weight and the level of activity of the

patient should be avoided due to the limited strength of the implants.

Failure to observe these precautionary measures can

have serious consequences for the healing process. INDICATIONS These relate to the current practice of applications of implants

in osteosynthesis (e.g. see literature AO/ASIF Instruments and Implants

Texhammer*Colton ISBN 3-540-56895-6 / ISBN 0-387-56895-6).

CONTRAINDICATIONS Acute and chronic infections; muscle, nerve or vascular diseases

that endanger the affected extremity; a lack of bony tissue or

poor bone quality (e.g. severe osteoporosis); local bone tumours.

Systemic diseases and metabolic disorders; infections and falls;

drug dependence; obesity; highly physical activities together with activities

involving extreme vibrations which can lead to overstraining of the implants. NOTES The user should record and keep all information provided to the patient.

It should be checked before use whether the patient tolerates the material to be implanted.

The implants described in these instructions for use

may only be used (implanted) by surgeons with the appropriate experience. POSSIBLE NEGATIVE EFFECTS (RISKS) Failure of the fracture to heal, allergy to the material, failure of the product (break, bending),

bone deformation and refracture, infection.

REMOVAL OF IMPLANTS The implants are normally removed once the fracture has healed.

CLEANING AND STERILISATION OF UNSTERILE IMPLANTS Before use, the implants must be sterilised using a validated procedure

(autoclaved).

MAT GmbH&Co.KG VALIDATED PROCEDURES

STERILISER: Steam autoclave: Temperature = 121° to 123° Celsius; Pressure = 1-1.2 bar (15 to 17 psi) with an exposure time of

at least 30 minutes in the packaged state. STERILISER: Autoclave with prevacuum: During the prevacuum phase the air is extracted from the chamber before the steam flows in.

Standard circulation for packaged objects: 132° to 135° Celsius; Pressure = 2 – 3 bar (27 to 30 psi) with an exposure time of at least 4 to 10 minutes.

IMPORTANT NOTES: Every time the implants are used or sterilised you must first check that they function perfectly!

In the event of failure to observe these instructions or demonstrable violation, no guarantee or compensation for damages can be provided.























implant material.



of implants.



















(autoclaved).





























implant material.



of implants.



















(autoclaved).







0123

MAT Medical Advanced Technology | 3

SET-011-0010-004 LARGE FRAGMENT BASIC INSTRUMENT SET

REF.-NO.: PRODUCT - DESCRIPTION PCS.:

TRAY-011-0010-004 TRAY-011-0010-004 Tray Large Fragment Basic Instrument SET-011-0010-004 (Graphic Case) -1-

005-0210-031 Drill bit - AO shaft Ø 3,2 mm x length 145 mm / 120 mm -3-

005-0210-096 Malleolar countersink Ø 3,2 mm -1-

005-0210-099 Countersink Ø 4,5 mm with T-handle and tip -1-

005-0210-044 Drill bit - AO shaft Ø 4,5 mm x length 145 mm / 120 mm -2-

005-0211-044 T-handle small with AO - quick coupling -1-

005-0211-046 Tap - AO shaft Ø 4,5 mm with cortical pitch 1,75 mm used for Ø 4,5 mm / Ø 6,5 mm screws -2-

005-0211-066 Tap - AO shaft Ø 6,5 mm with cancellouspitch 2,75 mm -1-

005-0214-015 Large hex. screwdriver - AO shaft standard (hex. flats 3,5 mm) used for Ø 4,5 mm / Ø 6,5 mm screws -1-

005-0219-006 Depth gauge large, extra long for measurement 120 mm used for Ø 4,5 mm / Ø 6,5 mm screws -1-

005-0212-026 Tap sleeve Ø 3,5 mm, also use as Ø 3,2 mm drill guide -1-

005-0212-032 Insert drill sleeve Ø 4,5 mm / Ø 3,2 mm -1-

005-0212-045 Tap sleeve Ø 4,5 mm -1-

005-0221-004 Drill sleeve for round hole Plates -1-

005-0222-044 Universal drill guide Ø 4,5 mm / Ø 3,2 mm used for tap Ø 4,5 mm and Ø 3,2 mm drill bit applicableFor neutral - load position

-1-

009-0368-035 Large hexagonal screwdriver for selfholding sleeve -1-

005-0221-012 Plates articulated tension device with joint, to tension of 20 mm also can be used as a distractor,color sale. Yellow up to 500N green up to 1000N, red over 1000N

-1-

005-0221-016 Combination wrench width across flats 11 mm used for tension device REF. 005-0221-012 -1-

005-0221-015 Socket wrench width across flats 11 mm used for tension device REF. 005-0221-012 -1-

005-0219-039 Sharp hook, length 155 mm -1-

005-0229-045 Bending templates 5 holes used for large Plates -1-



004-0310-020 K-wire Ø 2,0 mm x 150 mm with trocar tip and round end -10-

INDEX SET-011-0010-004 SET-LISTENING-CONTENT: INSTRUMENTS

REF.-NO.: STERILIZATION CONTAINER

C-110-135 1/1 Size container, bottom non perforated outside 580 x 280 x 135 mm / inside 550 x 265 x 115 mm

Tray-011-0010-004 Tray Large Fragment Basic Instrument SET-011-0010-004 (Graphic Case Stainless Steel)

Recommended Sterilization Container for SET-011-0010-004

SET-LISTING - CONTENT FOR SET: SET-011-0010-004


005-0210-029 Drill bit - AO shaft Ø 3,2 mm x length 195 mm / 170 mm



005-0210-099 Countersink Ø 4,5 mm with T-handle and tip 005-0211-046 Tap AO shaft Ø 4,5 mm with cortical pitch 1,75 mm used for Ø 4,5 mm cortical screws

005-0211-066 Tap AO shaft Ø 6,5 mm with cancellous pitch 2,75 mm used for Ø 6,5 mm cancellous screws

005-0212-032 Insert drill sleeve Ø 4,5 mm / Ø 3,2 mm

005-0210-096 Malleolar countersink Ø 3,2 mm 005-0211-044 T-handle small with AO - quick coupling

005-0212-026 Tap sleeve Ø 3,5 mm, also use as Ø 3,2 drill guide 005-0214-015 Large hex. screwdriver - AO shaft standard (hex. flats 3,5 mm) use for Ø 4,5 mm / Ø 6,5 mm screws


009-0368-035 Large hex. screwdriver used for self-holding sleeve REF. 009-0390-062

009-0390-062 Coupling self - holding sleeve for screwdriver REF. 009-0368-035

005-0212-045 Tap sleeve Ø 4,5 mm 005-0212-047 Pointed drill guide

005-0221-004 Drill sleeve for round hole plates Ø 3,2 mm 005-0222-029 Drill guide for Ø 6,5 mm / 3,5 mm used for 6,5 mm screws and Ø 3,5 mm drill bit

005-0222-044 Universal drill guide for Ø 4,5 mm / 3,2 mm used for tap Ø 4,5 mm screws and Ø 3,2 mm drill bit applica-ble for neutral - load position

005-0219-097 Screws forceps

LARGE FRAGMENT BASIC INSTRUMENTS


005-0219-006 Depth gauge large, extra long for measurement 120 mm used for Ø 4,5 mm and Ø 6,5 mm screws

004-0310-020 K-wire Ø 2,0 mm x 150 mm with trocar tip and round end

005-0219-039 Sharp hook, length 155 mm

005-0221-012 Plates articulated tension device with join, to tension of 20 mm also can be used as a distrac-tor. Color scale: yellow up to 500N, green up to 1000N, red over 1000N

005-0221-001 Drill sleeve for tension device REF. 005-0221-012

005-0221-016 Combination wrench width across flats 11 mm used for tension device REF. 005-0221-012

005-0221-015 Socket wrench width across flats 11 mm used for tension device REF. 005-0221-012



005-0229-045 Bending templates 5 holes used for large Plates



005-0229-002 Large bending iron for standard plates 4,5 mm

300-2430-101 Plates bending press

300-1833-050 Bending pliers 110-0171-402 Bending iron for reconstruction plates 3,5 mm / 4,5 mm


300-3650-016 Bending Bolt for K-wires Ø 1,25 mm up to Ø 2,5 mm

300-3649-814 Wire bending plier 300-0007-434 TC-Wire Cutter 220 mm used for soft wires Ø 3,0 mm an hard wire Ø 2,5 mm

INS-23-5005-24 Reposition bone holding forceps 24 cm / 9,5“

INS-23-5005-26 Reposition bone holding forceps 26 cm / 10 ,25”

INS-23-5005-28 Reposition bone holding forceps 28 cm / 11”

INS-8206-02 Verbrügge bone holding forceps 250 mm





010-0020-074 Self-centering bone holding forceps 240 mm



INS-23-4775-16 Bone reposition forceps 16 cm / 6,5”

NOTE!

ADDITIONAL GENERAL SURGICAL

ORTHOPEDIC / TRAUMATOLOGY

INSTRUMENTS ARE COLLECTED AND INSTALLED

IN THE MAT – GENERAL SURGICAL INSTRUMENT

CATALOGUE


LARGE FRAGMENT IMPLANTS

REF.-NO.: Diameter and complete Length

001-0008-012 Ø 4,5 mm x length 12 mm

001-0008-014 Ø 4,5 mm x length 14 mm

001-0008-016 Ø 4,5 mm x length 16 mm

001-0008-018 Ø 4,5 mm x length 18 mm

001-0008-020 Ø 4,5 mm x length 20 mm

001-0008-022 Ø 4,5 mm x length 22 mm

001-0008-024 Ø 4,5 mm x length 24 mm

001-0008-026 Ø 4,5 mm x length 26 mm

001-0008-028 Ø 4,5 mm x length 28 mm

001-0008-030 Ø 4,5 mm x length 30 mm

001-0008-032 Ø 4,5 mm x length 32 mm

001-0008-034 Ø 4,5 mm x length 34 mm

001-0008-036 Ø 4,5 mm x length 36 mm

001-0008-038 Ø 4,5 mm x length 38 mm

001-0008-040 Ø 4,5 mm x length 40 mm

001-0008-042 Ø 4,5 mm x length 42 mm

001-0008-044 Ø 4,5 mm x length 44 mm

001-0008-046 Ø 4,5 mm x length 46 mm

001-0008-048 Ø 4,5 mm x length 48 mm

001-0008-050 Ø 4,5 mm x length 50 mm


001-0008-052 Ø 4,5 mm x length 52 mm

001-0008-054 Ø 4,5 mm x length 54 mm

001-0008-056 Ø 4,5 mm x length 56 mm

001-0008-058 Ø 4,5 mm x length 58 mm

001-0008-060 Ø 4,5 mm x length 60 mm

001-0008-062 Ø 4,5 mm x length 62 mm

001-0008-064 Ø 4,5 mm x length 64 mm

001-0008-065 Ø 4,5 mm x length 65 mm

001-0008-070 Ø 4,5 mm x length 70 mm

001-0008-075 Ø 4,5 mm x length 75 mm

001-0008-080 Ø 4,5 mm x length 80 mm

001-0008-085 Ø 4,5 mm x length 85 mm

001-0008-090 Ø 4,5 mm x length 90 mm

001-0008-095 Ø 4,5 mm x length 95 mm

001-0008-100 Ø 4,5 mm x length 100 mm

001-0008-105 Ø 4,5 mm x length 105 mm

001-0008-110 Ø 4,5 mm x length 110 mm

001-0008-115 Ø 4,5 mm x length 115 mm

001-0008-120 Ø 4,5 mm x length 120 mm

Product – Description:

Stainless Steel Cortical Screw, Fullthreaded Ø 4,5 mmImportant Technical Dimensions:Head Diameter Ø 8,0 mmHexalobe Socket width 3,5 mmCore Diameter for cortical Thread Ø 3,0 mm

STAINLESS STEEL LARGE FRAGMENT DIA. 4,5 mm CORTICAL SCREW IMPLANTS

Thread Pitch 1,75 mmApplicable Drill Bit for Thread Hole Ø 3,2 mm

Material: Stainless Steel




001-0008-012S Ø 4,5 mm x length 12 mm

001-0008-014S Ø 4,5 mm x length 14 mm

001-0008-016S Ø 4,5 mm x length 16 mm

001-0008-018S Ø 4,5 mm x length 18 mm

001-0008-020S Ø 4,5 mm x length 20 mm

001-0008-022S Ø 4,5 mm x length 22 mm

001-0008-024S Ø 4,5 mm x length 24 mm

001-0008-026S Ø 4,5 mm x length 26 mm

001-0008-028S Ø 4,5 mm x length 28 mm

001-0008-030S Ø 4,5 mm x length 30 mm

001-0008-032S Ø 4,5 mm x length 32 mm

001-0008-034S Ø 4,5 mm x length 34 mm

001-0008-036S Ø 4,5 mm x length 36 mm

001-0008-038S Ø 4,5 mm x length 38 mm

001-0008-040S Ø 4,5 mm x length 40 mm

001-0008-042S Ø 4,5 mm x length 42 mm

001-0008-044S Ø 4,5 mm x length 44 mm

001-0008-046S Ø 4,5 mm x length 46 mm

001-0008-048S Ø 4,5 mm x length 48 mm

001-0008-050S Ø 4,5 mm x length 50 mm


001-0008-052S Ø 4,5 mm x length 52 mm

001-0008-054S Ø 4,5 mm x length 54 mm

001-0008-056S Ø 4,5 mm x length 56 mm

001-0008-058S Ø 4,5 mm x length 58 mm

001-0008-060S Ø 4,5 mm x length 60 mm

001-0008-062S Ø 4,5 mm x length 62 mm

001-0008-064S Ø 4,5 mm x length 64 mm

001-0008-065S Ø 4,5 mm x length 65 mm

001-0008-070S Ø 4,5 mm x length 70 mm

001-0008-075S Ø 4,5 mm x length 75 mm

001-0008-080S Ø 4,5 mm x length 80 mm

001-0008-085S Ø 4,5 mm x length 85 mm

001-0008-090S Ø 4,5 mm x length 90 mm

001-0008-095S Ø 4,5 mm x length 95 mm

001-0008-100S Ø 4,5 mm x length 100 mm

001-0008-105S Ø 4,5 mm x length 105 mm

001-0008-110S Ø 4,5 mm x length 110 mm

001-0008-115S Ø 4,5 mm x length 115 mm

001-0008-120S Ø 4,5 mm x length 120 mm


Stainless Steel Cortical Screw, Fullthreaded Ø 4,5 mm, self-tappingImportant Technical Dimensions:Head Diameter Ø 8,0 mmHexalobe Socket width 3,5 mmCore Diameter for cortical Thread Ø 3,0 mm

Thread Pitch 1,75 mmApplicable Drill Bit for Thread Hole Ø 3,2 mmNote: Tapping is not applicable for this screw!Material: Stainless Steel

STAINLESS STEEL LARGE FRAGMENT DIA. 4,5 mm CORTICAL SCREW IMPLANTS, SELF-TAPPING



001-0009-020 Ø 4,5 mm x length 20 mm

001-0009-025 Ø 4,5 mm x length 25 mm

001-0009-030 Ø 4,5 mm x length 30 mm

001-0009-035 Ø 4,5 mm x length 35 mm

001-0009-040 Ø 4,5 mm x length 40 mm

001-0009-045 Ø 4,5 mm x length 45 mm

001-0009-050 Ø 4,5 mm x length 50 mm

001-0009-055 Ø 4,5 mm x length 55 mm

001-0009-060 Ø 4,5 mm x length 60 mm

001-0009-065 Ø 4,5 mm x length 65 mm

001-0009-070 Ø 4,5 mm x length 70 mm

001-0009-075 Ø 4,5 mm x length 75 mm

001-0009-080 Ø 4,5 mm x length 80 mm

001-0009-085 Ø 4,5 mm x length 85 mm

001-0009-090 Ø 4,5 mm x length 90 mm

001-0009-095 Ø 4,5 mm x length 95 mm

001-0009-100 Ø 4,5 mm x length 100 mm

001-0009-105 Ø 4,5 mm x length 105 mm

001-0009-110 Ø 4,5 mm x length 110 mm


Stainless Steel Malleolar Screw Ø 4,5 mmImportant Technical Dimensions:Head Diameter Ø 8,0 mmShaft Diameter 3,o mmCore Diameter for cortical Thread Ø 3,0 mm

Thread Pitch 1,75 mmApplicable Drill Bit for Thread Hole Ø 3,2 mm

Material: Stainless Steel

STAINLESS STEEL LARGE FRAGMENT DIA. 4,5 mm MALLEOLAR SCREW IMPLANT



001-0010-030 Ø 6,5 mm x length 30 mm

001-0010-035 Ø 6,5 mm x length 35 mm

001-0010-040 Ø 6,5 mm x length 40 mm

001-0010-045 Ø 6,5 mm x length 45 mm

001-0010-050 Ø 6,5 mm x length 50 mm

001-0010-055 Ø 6,5 mm x length 55 mm

001-0010-060 Ø 6,5 mm x length 60 mm

001-0010-065 Ø 6,5 mm x length 65 mm

001-0010-070 Ø 6,5 mm x length 70 mm

001-0010-075 Ø 6,5 mm x length 75 mm

001-0010-080 Ø 6,5 mm x length 80 mm

001-0010-085 Ø 6,5 mm x length 85 mm

001-0010-090 Ø 6,5 mm x length 90 mm

001-0010-095 Ø 6,5 mm x length 95 mm

001-0010-100 Ø 6,5 mm x length 100 mm

001-0010-105 Ø 6,5 mm x length 105 mm

001-0010-110 Ø 6,5 mm x length 110 mm

001-0010-115 Ø 6,5 mm x length 115 mm

001-0010-120 Ø 6,5 mm x length 120 mm

Product – Description:Stainless Steel Cancellous Screws Ø 6,5 mmwith partially Thread 16 mmImportant Technical Dimensions:Head Diameter Ø 8,0 mmHexalobe Socket width 3,5 mmShaft Diameter 4,5 mmCore Diameter for cancellous Thread Ø 3,0 mmThread Pitch 2,75 mmThread Length 16 mmApplicable Drill Bit for Thread Hole Ø 3,2 mmApplicable Drill Bit for Thread Hole, hard Bone Ø 4,5 mm Material: Stainless Steel

STAINLESS STEEL LARGE FRAGMENT DIA. 6,5 mm CANCELLOUS SCREW IMPLANTS WITH PARTIALLY THREAD 16 mm



001-0011-040 Ø 6,5 mm x length 40 mm

001-0011-045 Ø 6,5 mm x length 45 mm

001-0011-050 Ø 6,5 mm x length 50 mm

001-0011-055 Ø 6,5 mm x length 55 mm

001-0011-060 Ø 6,5 mm x length 60 mm

001-0011-065 Ø 6,5 mm x length 65 mm

001-0011-070 Ø 6,5 mm x length 70 mm

001-0011-075 Ø 6,5 mm x length 75 mm

001-0011-080 Ø 6,5 mm x length 80 mm

001-0011-085 Ø 6,5 mm x length 85 mm

001-0011-090 Ø 6,5 mm x length 90 mm

001-0011-095 Ø 6,5 mm x length 95 mm

001-0011-100 Ø 6,5 mm x length 100 mm

001-0011-105 Ø 6,5 mm x length 105 mm

001-0011-110 Ø 6,5 mm x length 110 mm

001-0011-115 Ø 6,5 mm x length 115 mm

001-0011-120 Ø 6,5 mm x length 120 mm

Product – Description:Stainless Steel Cancellous Screws Ø 6,5 mmwith partially Thread 32 mmImportant Technical Dimensions:Head Diameter Ø 8,0 mmHexalobe Socket width 3,5 mmShaft Diameter 4,5 mmCore Diameter for cancellous Thread Ø 3,0 mmThread Pitch 2,75 mmThread Length 32 mmApplicable Drill Bit for Thread Hole Ø 3,2 mmApplicable Drill Bit for Thread Hole, hard Bone Ø 4,5 mm Material: Stainless Steel

STAINLESS STEEL LARGE FRAGMENT DIA. 6,5 mm CANCELLOUS SCREW IMPLANTS WITH PARTIALLY THREAD 32 mm



001-0012-020 Ø 6,5 mm x length 20 mm

001-0012-025 Ø 6,5 mm x length 25 mm

001-0012-030 Ø 6,5 mm x length 30 mm

001-0012-035 Ø 6,5 mm x length 35 mm

001-0012-040 Ø 6,5 mm x length 40 mm

001-0012-045 Ø 6,5 mm x length 45 mm

001-0012-050 Ø 6,5 mm x length 50 mm

001-0012-055 Ø 6,5 mm x length 55 mm

001-0012-060 Ø 6,5 mm x length 60 mm

001-0012-065 Ø 6,5 mm x length 65 mm

001-0012-070 Ø 6,5 mm x length 70 mm

001-0012-075 Ø 6,5 mm x length 75 mm

001-0012-080 Ø 6,5 mm x length 80 mm

001-0012-085 Ø 6,5 mm x length 85 mm

001-0012-090 Ø 6,5 mm x length 90 mm

001-0012-095 Ø 6,5 mm x length 95 mm

001-0012-100 Ø 6,5 mm x length 100 mm

001-0012-105 Ø 6,5 mm x length 105 mm

001-0012-110 Ø 6,5 mm x length 110 mm

001-0012-115 Ø 6,5 mm x length 115 mm

001-0012-120 Ø 6,5 mm x length 120 mm

Product – Description:Stainless Steel Fullthreaded Cancellous Screw Ø 6,5 mm

Important Technical Dimensions:Head Diameter Ø 8,0 mmHexalobe Socket width 3,5 mmShaft Diameter 4,5 mmCore Diameter for cancellous Thread Ø 3,0 mmThread Pitch 2,75 mm

Applicable Drill Bit for Thread Hole Ø 3,2 mmApplicable Drill Bit for Thread Hole, hard Bone Ø 4,5 mm Material: Stainless Steel

Product – Description:Stainless Steel Washer Ø 13,0 mmused for Ø 4,5 mm / Ø 6,5 mm Screws

REF.-NO.:001-0013-004

STAINLESS STEEL LARGE FRAGMENT DIA. 6,5 mm FULLTHREADED CANCELLOUS SCREW IMPLANT


SET-011-0010-051 LARGE FRAGMENT SCREW SET4,5 mm / 6,5 mm SYSTEM

REF.-NO.: PRODUCT-DESCRIPTION PCS.:

TRAY-011-0010-051 Tray for Large Fragment ScrewSET-011-0010-051 (Graphic Case)

-1-

REF.-NO.: DIA. 4,5 mm CORTICAL SCREW IMPLANTS

001-0008-014 Ø 4,5 mm x length 14 mm -6-

001-0008-016 Ø 4,5 mm x length 16 mm -6-

001-0008-018 Ø 4,5 mm x length 18 mm -6-

001-0008-020 Ø 4,5 mm x length 20 mm -6-

001-0008-022 Ø 4,5 mm x length 22 mm -6-

001-0008-024 Ø 4,5 mm x length 24 mm -6-

001-0008-026 Ø 4,5 mm x length 26 mm -7-

001-0008-028 Ø 4,5 mm x length 28 mm -7-

001-0008-030 Ø 4,5 mm x length 30 mm -14-

001-0008-032 Ø 4,5 mm x length 32 mm -14-

001-0008-034 Ø 4,5 mm x length 34 mm -14-

001-0008-036 Ø 4,5 mm x length 36 mm -14-

001-0008-038 Ø 4,5 mm x length 38 mm -7-

001-0008-040 Ø 4,5 mm x length 40 mm -14-

001-0008-042 Ø 4,5 mm x length 42 mm -6-

001-0008-044 Ø 4,5 mm x length 44 mm -6-

001-0008-046 Ø 4,5 mm x length 46 mm -6-

001-0008-048 Ø 4,5 mm x length 48 mm -3-

001-0008-052 Ø 4,5 mm x length 52 mm -3-

001-0008-056 Ø 4,5 mm x length 56 mm -3-

001-0008-060 Ø 4,5 mm x length 60 mm -3-

001-0008-065 Ø 4,5 mm x length 65 mm -3-

001-0008-070 Ø 4,5 mm x length 70 mm -3-

Tray-011-0010-051 Tray Large Fragment ScrewSET-011-0010-051 (Graphic Case Stainless Steel)

INDEX: SET-011-0010-051 LARGE FRAGMENT SCREW SET-LISTING - CONTENT:SCREWS / WASHER / SCREW FORCEPS

LISTING-CONTENT:Catalogue page 16 up to 18


REF.-NO.: PRODUCT-DESCRIPTIONDIA. 4,5 mm MALLEOLAR SCREW IMPLANT

PCS.:

001-0009-025 Ø 4,5 mm x length 25 mm -3-

001-0009-030 Ø 4,5 mm x length 30 mm -3-

001-0009-035 Ø 4,5 mm x length 35 mm -3-

001-0009-040 Ø 4,5 mm x length 40 mm -3-

001-0009-045 Ø 4,5 mm x length 45 mm -3-

001-0009-050 Ø 4,5 mm x length 50 mm -3-

001-0009-055 Ø 4,5 mm x length 55 mm -3-

001-0009-060 Ø 4,5 mm x length 60 mm -3-

001-0009-065 Ø 4,5 mm x length 65 mm -3-

001-0009-070 Ø 4,5 mm x length 70 mm -3-

REF.-NO.: PRODUCT-DESCRIPTIONDIA. 6,5 mm CANCELLOUS SCREW IMPLANTWITH PARTIALLY THREAD 16 mm

PCS.:

001-0010-030 Ø 6,5 mm x length 30 mm -2-

001-0010-035 Ø 6,5 mm x length 35 mm -2-

001-0010-040 Ø 6,5 mm x length 40 mm -2-

001-0010-045 Ø 6,5 mm x length 45 mm -2-

001-0010-050 Ø 6,5 mm x length 50 mm -2-

001-0010-055 Ø 6,5 mm x length 55 mm -2-

001-0010-060 Ø 6,5 mm x length 60 mm -2-

001-0010-065 Ø 6,5 mm x length 65 mm -2-

001-0010-070 Ø 6,5 mm x length 70 mm -2-

001-0010-075 Ø 6,5 mm x length 75 mm -2-

001-0010-080 Ø 6,5 mm x length 80 mm -2-

001-0010-085 Ø 6,5 mm x length 85 mm -2-

001-0010-090 Ø 6,5 mm x length 90 mm -2-

001-0010-095 Ø 6,5 mm x length 95 mm -2-

001-0010-100 Ø 6,5 mm x length 100 mm -2-

001-0010-105 Ø 6,5 mm x length 105 mm -2-

001-0010-110 Ø 6,5 mm x length 110 mm -2-





REF.-NO.: PRODUCT-DESCRIPTIONDIA. 6,5 mm CANCELLOUS SCREW IMPLANTS WITH PARTIALLY THREAD 32 mm

PCS.:

001-0011-045 Ø 6,5 mm x length 45 mm -3-

001-0011-050 Ø 6,5 mm x length 50 mm -3-

001-0011-055 Ø 6,5 mm x length 55 mm -3-

001-0011-060 Ø 6,5 mm x length 60 mm -3-

001-0011-065 Ø 6,5 mm x length 65 mm -3-

001-0011-070 Ø 6,5 mm x length 70 mm -3-

001-0011-075 Ø 6,5 mm x length 75 mm -3-

001-0011-080 Ø 6,5 mm x length 80 mm -3-

001-0011-085 Ø 6,5 mm x length 85 mm -3-

001-0011-090 Ø 6,5 mm x length 90 mm -3-

001-0011-095 Ø 6,5 mm x length 95 mm -3-

001-0011-100 Ø 6,5 mm x length 100 mm -3-

001-0011-105 Ø 6,5 mm x length 105 mm -3-

001-0011-110 Ø 6,5 mm x length 110 mm -3-

REF.-NO.: PRODUCT-DESCRIPTIONDIA. 6,5 mm FULLTHREADED CANCELLOUS SCREW IMPLANT

PCS.:

001-0012-025 Ø 6,5 mm x length 25 mm -4-

001-0012-030 Ø 6,5 mm x length 30 mm -4-

001-0012-035 Ø 6,5 mm x length 35 mm -4-

001-0012-040 Ø 6,5 mm x length 40 mm -4-

001-0012-045 Ø 6,5 mm x length 45 mm -2-

001-0012-050 Ø 6,5 mm x length 50 mm -2-

001-0012-055 Ø 6,5 mm x length 55 mm -2-

001-0012-060 Ø 6,5 mm x length 60 mm -2-

001-0012-065 Ø 6,5 mm x length 65 mm -2-

001-0012-070 Ø 6,5 mm x length 70 mm -2-

001-0012-075 Ø 6,5 mm x length 75 mm -2-

001-0012-080 Ø 6,5 mm x length 80 mm -2-

001-0012-085 Ø 6,5 mm x length 85 mm -2-

001-0012-090 Ø 6,5 mm x length 90 mm -2-

001-0012-095 Ø 6,5 mm x length 95 mm -2-

001-0012-100 Ø 6,5 mm x length 100 mm -2-

001-0012-105 Ø 6,5 mm x length 105 mm -2-

001-0012-110 Ø 6,5 mm x length 110 mm -2-

REF.-NO.: PRODUCT-DESCRIPTION PCS.:

001-0013-004 Washer Ø 13,0 mm used for Ø 4,5 mm / Ø 6,5 mm Screws

-6-

005-0219-097 Screw forceps -1-




SET-011-0010-051 LARGE FRAGMENT SCREW SET4,5 mm / 6,5 mm SYSTEM


RECOMMEND STERILIZATION CONTAINER FOR SET-011-0010-024



SET-011-0010-051 LARGE FRAGMENT SCREW SETRECOMMENED STERILIZATION CONTAINER FOR

4,5 mm / 6,5 mm SYSTEM


STAINLESS STEEL LARGE FRAGMENT Semi Tubular Plates Ø 4,5 mm

STAINLESS STEEL LARGE FRAGMENT Narrow Compression Plates Ø 4,5 mm / 6,5 mm

Product - Description:Semi Tubular Plates Ø 4,5 mm used with Ø 4,5 mm Cortical ScrewsApplicable for Fixation of Forearm Fractures, occasionally be used as a tension Band Plates in open Book Injuries of the Pelvis and as a second Plates in comminuted Fractures in the Metaphysis of long Bones.

Product - Description:Narrow Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of Tibia Shaft Fractures, occasionally be used on the Radius or Ulna in a Large Patient

REF.-NO.: Complete Length and Holes

PL-1019-02 Length 139 mm x Hole 2




























Important technical Dimensions:Thickness 1,0 mmBroad / Shaft 12,0 mmDistance Hole / Shaft 16,0 mm (middle spacing 25,0 mm)Material: Stainless Steel

Product - Description:Stainless Steel Semi Tubular Plates Ø 4,5 mm


Product - Description:Narrow Compression Plates Ø 4,5 mm / Ø 6,5 mm



STAINLESS STEEL LARGE FRAGMENT MC-Narrow Compression Plates Ø 4,5 mm

STAINLESS STEEL LARGE FRAGMENT Broad Compression Plates Ø 4,5 mm / Ø 6,5 mm

Product - Description:MC-Narrow Plates Ø 4,5 mm used with Ø 4,5 mm Cortical ScrewApplicable for Fixation of Tibia Shaft Fractures, occasionally be used on the Radius or Ulna in a Large Patient

Product - Description:(MC) Minimal Content Narrow Compression Plates Ø 4,5 mm / Ø 6,5 mm

Product - Description:Broad Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewApplicable for Fixation of diaphysis Fractures of Femur and Humerus

Product - Description:Broad Compression Plates Ø 4,5 mm / Ø 6,5 mm











PL-1011-03 Length 155 mm x Hole 0 3



























STAINLESS STEEL LARGE FRAGMENT MC-Board CompressionPlates Ø 4,5 mm

STAINLESS STEEL LARGE FRAGMENT Spoon Plates Ø 4,5 mm / 6,5 mm

Product - Description:MC-Board Plates Ø 4,5 mm used with Ø 4,5 mm Cortical ScrewsApplicable for Fixation of Femur Fractures and for pseudarthroses of the Humerus

Product - Description:(MC) Minimal Contact Broad Compression Plates Ø 4,5 mm

Product - Description:Spoon Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of distal Tibia Joint Fractures





















Important technical Dimensions:Thickness 2,0 mmHead Width 34,0 mmMaterial: Stainless Steel

Product - Description:Spoon Plates Ø 4,5 mm / Ø 6,5 mm

















STAINLESS STEEL LARGE FRAGMENT T-Plates Ø 4,5 mm / 6,5 mm

STAINLESS STEEL LARGE FRAGMENT T-Buttress Ø 4,5 mm / 6,5 mm

Product - Description:T-Plates Ø 4,5 mm used with Ø 4,5 mm Cortical Screws - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of Tibia Plateau Fractures, medical Aspect also applied in proximal Humeral Fractures

Important technical Dimensions:Thickness 2,0 mmBroad / Shaft 17,0 mmHead Width 33,0 mmDistance Hole / Shaft 16,0 mmMaterial: Stainless Steel

Product - Description:T-Plates Ø 4,5 mm / Ø 6,5 mm

Product - Description:T-Buttress Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of Tibia Plateau Fractures, lateral Aspect


Product - Description:T-Buttress Plates Ø 4,5 mm / Ø 6,5 mm




RIGHT PLATES

PL-1038-04R Length 087 mm x Hole 04 RIGHT




LEFT PLATES

PL-1038-04L Length 087 mm x Hole 04 LEFT

PL-1038-06L Length 119 mm x Hole06 LEFT




RIGHT PLATES






LEFT PLATES






STAINLESS STEEL LARGE FRAGMENT L-Buttress Plates Ø 4,5 mm / 6,5 mm

STAINLESS STEEL LARGE FRAGMENT Lateral Tibia Head Buttress Ø 4,5 mm / 6,5 mm

Product - Description:L-Buttress Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of Tibia Plateau Fractures, lateral Aspect

Important technical Dimensions:Thickness 2,0 mmBroad / Shaft 16,0 mmDistance Hole / Shaft 16,0 mmMaterial: Stainless Steel

Product - Description:L-Buttress Plates Ø 4,5 mm / Ø 6,5 mm

Product - Description:Lateral Tibia Head Buttress Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of lateral Tibia Plateau Fractures


Product - Description:Lateral Tibia Head Buttress Plates Ø 4,5 mm / Ø 6,5 mm



RIGHT PLATES






LEFT PLATES







RIGHT PLATES






LEFT PLATES






STAINLESS STEEL LARGE FRAGMENT Proximal Tibia Plates, Lateral Ø 4,5 mm / 6,5 mm

STAINLESS STEEL LARGE FRAGMENT Distal Tibia Plates, Medial Ø 4,5 mm / 6,5 mm

Product - Description:Proximal Tibia Plates, lateral Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of lateral Tibia Plateau Fractures


Product - Description:Proximal Tibia Plates, lateral Ø 4,5 mm / Ø 6,5 mm

Product - Description:Distal Tibia Plates, medial Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of distal Tibia Fractures


Product - Description:Distal Tibia Plates, medial Ø 4,5 mm / Ø 6,5 mm



RIGHT PLATES






LEFT PLATES











STAINLESS STEEL LARGE FRAGMENT Femur Condylar Buttress Plates Ø 4,5 mm / 6,5 mm

STAINLESS STEEL LARGE FRAGMENT Femur Cobra Head Plates Ø 4,5 mm

Product - Description:Femur Condylar Buttress Plates Ø 4,5 mm used with Ø 4,5 mm Cortical - and Ø 6,5 mm Cancellous ScrewsApplicable for Fixation of comminuted Fractures in the distal Femur


Product - Description:Femur Condylar Buttress Plates Ø 4,5 mm / Ø 6,5 mm

Product - Description:Femur Cobra Head Plates Ø 4,5 mm used with Ø 4,5 mm Cortical ScrewsApplicable for Fixation of Hip Arthodesis


Product - Description:Femur Cobra Head Plates Ø 4,5 mm


STAINLESS STEEL LARGE FRAGMENT Narrow Lengthening 8 Hole Plates Ø 4,5 mm / 6,5 mm

STAINLESS STEEL LARGE FRAGMENT Broad Lengthening 8 Hole Plates Ø 4,5 mm / Ø 6,5 mm

Product - Description:Narrow Lengthening 8 Hole Plates Ø 4,5 mm used with Ø 4,5 mm Cortical and Ø 6,5 mm Cancellous ScrewsApplicable for used lengthening Procedures with the lengthening Apparatus Plates


Product - Description:Narrow Lengthening 8 Hole Plates Ø 4,5 mm / Ø 6,5 mm

Product - Description:Broad Lengthening 8 Hole Plates Ø 4,5 mm used with Ø 4,5 mm Cortical and Ø 6,5 mm Cancellous ScrewsApplicable for used lengthening Procedures Femur with the lengthening Apparatus Plates


Product - Description:Broad Lengthening 8 Hole Plates Ø 4,5 mm / Ø 6,5 mm

REF.-NO.: Complete Length and Holes Lengthening mm

PL-1010-308 Length 125 mm x Hole 8 30 mm













STAINLESS STEEL LARGE FRAGMENT Broad Lengthening 10 Hole Plates Ø 4,5 mm / Ø 6,5 mm

Product - Description:Broad Lengthening 10 Hole Plates Ø 4,5 mm used with Ø 4,5 mm Cortical and Ø 6,5 mm Cancellous ScrewsApplicable for used lengthening Procedures Femur with the lengthening Apparatus Plates


Product - Description:Broad Lengthening 10 Hole Plates Ø 4,5 mm / Ø 6,5 mm











SET-011-0010-052REF.-NO.: PRODUCT - DESCRIPTION PCS.:

TRAY-011-0010-052 Tray for Large Fragment Plate Set SET-011-0010-052 (Graphic Case)

-1-

STAINLESS STEEL LARGE FRAGMENT

REF.-NO.: SEMI TUBULAR PLATES Ø 4,5 mm PCS.:

PL-1019-04 Length 71 mm x Hole 4 -2-




REF.-NO.: NARROW COMPRESSION PLATES Ø 4,5 mm / Ø 6,5 mm

PCS.:









REF.-NO.: BROAD COMPRESSION PLATES Ø 4,5 mm / Ø 6,5 mm

PCS.:








REF.-NO.: SPOON PLATES Ø 4,5 mm / Ø 6,5 mm PCS.:



REF.-NO.: T - PLATES Ø 4,5 mm / Ø 6,5 mm PCS.:




REF.-NO.: T - BUTTRESS PLATES Ø 4,5 mm / Ø 6,5 mm PCS.:


REF.-NO.: L - BUTTRESS PLATES Ø 4,5 mm / Ø 6,5 mm PCS.:



TRAY-011-0010-052 Tray for Large Fragment PlateSET-011-0010-052 (Graphic Case Stainless Steel)

INDEX: SET-011-0010-052LARGE FRAGMENT PLATE SET-LISTING - CONTENT:NARROW AND BROAD PLATES

LISTING-CONTENT:Catalogue page 29

LARGE FRAGMENT PLATE SET4,5 mm / 6,5 mm System

CONTENT NARROWAND BROAD PLATES


SET-011-0010-052 LARGE FRAGMENT PLATE SETRECOMMENDED STERILIZATION CONTAINER FOR

4,5 mm / 6,5 mm SYSTEM

RECOMMENDED STERILIZATION CONTAINER FOR SET-011-0010-052




NOTICE

Large Fragment Instruments © MAT / AtelierUrban

MEDICAL ADVANCED TECHNOLOGY

MAT GmbH & Co.KGFriedrich-Wöhler Straße 1078576 Emmingen-Liptingen, GermanyPhone: +49 (0)7465 909 188 ∙ Fax : +49 (0)7465 909 024 www.mat-medical.com ∙ [email protected]

Revision 19.11.2014

3 mat large-fragment

Health & Medicine

Transcript of 3 mat large-fragment