3 Manual Metal Cutting Tools Should You Own

6
3 Manual Metal Cutting Tools Should You Own

description

As you assemble all of the materials, tools, and pieces of equipment that go along with your working gear, you will run into a few more practical concerns. For more inforrmation: https://www.stortz.com/product-category/roofing-tools/sheet-metal-roofing-tools/tin-snips/

Transcript of 3 Manual Metal Cutting Tools Should You Own

Page 1: 3 Manual Metal Cutting Tools Should You Own

3 Manual Metal Cutting Tools Should

You Own

Page 2: 3 Manual Metal Cutting Tools Should You Own

Mainly that comes down to finding the right balance between what you need, whatyou want, how much space you have, and how much you are willing to spend. Theseare all very sensible, understandable concerns to have as they directly influence theway that you are able to work and manage your financial situation. Ideally, you wouldwant to have all of the most basic, essential tools in your kit for the lowest price youcould possibly pay. You do not want to have so many tools to work with that itbecomes difficult for you to figure out how to store them all, or that you stretch yourbudget too far, too quickly. You want to start off with all of the basic, but versatile toolsand equipment that you need and slowly build up over time so that you can includemore expensive or specialized items. One of the tools that you should start off withare metal snips. If you didn’t know already, you will soon see just how much this oneitem can do for you early on in building out your kit.

Page 3: 3 Manual Metal Cutting Tools Should You Own

What Are Metal Snips?

Metal snips are a type of hand tool, which resemble scissors or shears, hence the namesnips. They essentially look like large, sturdy scissors and operate in a similar fashion asyou cut through different materials with them much like scissors cut through paper.Unlike ordinary scissors, however, metal snips are made to handle much tougher,thicker, stronger materials than paper and string.

Page 4: 3 Manual Metal Cutting Tools Should You Own

What Can I Do With Metal Snips?

So now we can get to the real meat of the subject. You know what metal snips are,but that does not give you the full picture of what this tool can do for you. Metalsnips are normally considered a metal cutting tool, which means that the mainfunction that they serve is to cut through sheet metal. This will come in handy if youexpect to get a lot of work in installing or repairing metal roofing. You can cut intosome of the slimmer gauges of metal sheets like aluminum, steel, or tin (which is alsowhy these are sometimes known as tin snips). Metal snips can help you to easily cutthrough sheet metal while still leaving a clean, straight, smooth edge. Since they arehand tools, the main way that they are used is up to you. You can work at your ownpace, cut into curves, and really maneuver around a space to do what you need todo. Just as a bonus, you may also use metal snips to cut through some other toughermaterials like thick cardboards, if you wish. But you may want to leave it for metalwork.

Page 5: 3 Manual Metal Cutting Tools Should You Own

How Would They Fit Into My Kit?

Not only do these tools check the boxes for versatility and functionality, but they alsohave you covered for some other needs as well. Metal snips are fairly inexpensive forwhat you get and come in a range of styles so you can get one that matches yourneeds or budget the best. They are small, handheld tools, so they do not take up muchspace, which makes them easy to bring with you to your job and to use on-site.

This small, simple device is truly a must-have in your kit.Looking at the size, price point and everything that it can do,you really should place this one high on your list and pick themup soon. You can take a look at a bunch of different options formetal snips at John Stortz & Son to find which ones speak toyou.