1500 1800 2100
Porkka Remote Heat Disposal System (RHDS)
RHDS liquid to air condenser can be
wall, floor or roof mounted either
externally or ideally within an area
where the heat can be utilised such
as a warehouse, etc. Noise levels are
kept low as only fans are run on the
external unit.
New Unique Porkka Shelving System
Porkka has designed a totally new shelving system for our standard range of
rooms. We have focused on improved hygiene features, flexibility and greater
surface area, for more storage space. The support pilasters are fixed to the
insulated wall panels, which are positioned to allow easy all round cleaning of
the floor.
Four (4) tier shelving is supplied as standard. In rooms with a width up to
1500mm, shelving is supplied to two (2) walls and in rooms with greater
width, shelving is fitted to three (3) walls.
Installation is simple and quick. Place shelf support brackets at desired height,
fit support bars horizontally into the ready made openings and place shelving
inserts between the bars. The tough, strong inserts are produced from plastic
that is approved for use with foodstuffs. Even the largest shelving insert 300 x
462mm can fit into most commercial dishwashers.
It is also possible to purchase additional shelves which can be easily added at
a later date to facilitate further storage space.
The depth of rear wall shelving will be 488mm and dependent on room
model, the total depth of side wall shelving will be either 398 or 488mm.
The shelving can be evenly loaded with up to 70Kg per meter run i.e. 280 Kg
per 4 tier shelving meter run.
Easy-to-adjust shelves are strong and machine washable.
Shelf support brackets
together with horizontal
install and are designed to
be strong and durable
the floor level than in the
previous range. Sufficient
Shelf inserts have been
produced from high density,
durable plastic, which is
approved for use with
taken out and washed in a
dishwasher or by hand for
improved hygiene.
Porkka rooms are produced from modular CFC/HCFC-free
polyurethane insulated panels which are moulded with male / female
joints and held by eccentric action cam-locks, giving great all-round
strength. The visible exterior surfaces of the panels are coated with
durable scratch resistant polyester, which is classified as food safe.
Insulation thickness with excellent thermal efficiency is 80mm as
standard with an option of 100mm for freezer application if required.
Doors are semi-rebated and supplied with heavy duty hinges and a
lockable door handle with emergency entrapment release. Thresholds
and surrounds are produced from durable stainless steel with a heater
supplied for freezer application. Doors are already pre-mounted on a
panel for ease of assembly in the field.
Floors, when supplied, are insulated and have a strong marine
plywood surface, which is coated with a non-slip glass fibre resin.
Load limit for a standard floor max. 40 KN/m2 or max 1,0 KN/ per
40mm castor. Heavy duty floor with stainless steel surface available
as an additional accessory.
dimensions increase storage areas within our rooms.
Carefully planned materials and details Select from our extensive range, for a room to suit your requirements
Porkka cold rooms with volumes from 1.2 to 22m3.
Three temperature ranges; +2 to +8°C (adjustable in increments of 1°C) for chilled
produce. For the storage of fresh meat or fish use –2 to +5°C and for frozen select
–18 to –22°C.
Select floorless chill rooms for trolley operation. (Chill temperature only).
Medium and freezer rooms must be supplied with a floor which can be either recessed or with a ramp if a trolley is required.
Cooling units can be manufactured for placement either to the left or right hand side of the door and can also be made for connection to a central cooling system.
Door can be hung either left or right-hinged or changed in the field if required.
Standard external height 2100mm (note 2140mm if 100mm insulation selected) or 2400 / 2440mm.
4 tier fully adjustable shelving is supplied for either 2 or 3 walls depending on model selected. Standard shelves are made of ABS-plastics and can be washed in a commercial dishwasher. Stainless steel shelves are available as an additional accessory.
Decades of experience in the design, technology and production of high quality refrigeration equipment
Combined digital temperature display with built-in control functions
1. Compressor RUN light
3. Evaporator fan RUN light
4. Alarm activated light
The air inlet to the condenser is on the lower
part of the refrigeration unit, ensuring the
coolest air is always used helping to reduce
running costs and extending the service life
of the unit. The dust filter behind the air grill
is easy to clean or replace. The controller
provides information on when the filter
requires cleaning or changing.
Advanced HACCP monitoring features with a ready to use connection to a computer or building maintenance system.
HACCP
and Critical Control Point) properties enable
continuous and real-time temperature monitoring in compliance with the European Food Act being
implemented by many governments. For further information about our HACCP functions see page 13.
Alarm functions
The Porkka temperature display is supplied with a built-in high/low temperature alarm which
is both audible and visual and can also be connected to a building management system by
means of a volt free connection.
Trolley operation
To facilitate the use of trolleys, chill rooms can be supplied
without a floor. In this instance, the room is erected on an
insulated plinth and the door equipped with a sweeper gasket.
The installation package contains all components. Medium and
low temperature rooms must always be supplied with a floor. If
trolley use is essential, it is possible to recess the floor, or, if
above ground, supply an optional ramp. In either case, the doors
are fitted with a sweeper gasket.
Safety
The door is supplied with heavy duty hinges and a lockable door
handle with a luminous emergency entrapment release, which
overrides the lock at all times, should someone accidentally be
shut in the room. Door threshold and surround is fitted with a
heater to prevent freezing of the gasket to the frame in low
temperature models. If required floor panels can also be
supplied with built-in heaters to prevent freezing or moisture
damage below a larger freezer room.
Shelving system
The Porkka modular cold room shelving system is highly
practical and easy to clean. Standard shelving delivery includes
four (4) tier dishwasher safe polycarbonate (food safe) inserts
and supporting material. Shelving is supplied for either 2 or 3
walls dependent on model selected.
Cooling units produced in our own factory have been designed to be both powerful and energy efficient. Digital temperature displays have built-in high/low alarms which are both audible and visual. These can be connected via a volt free relay to a building management system. The controller is also equipped with HACCP features to meet the more stringent temperature monitoring regulations being enforced. The unit or units can be connected to an independent monitoring server and temperatures automatically recorded via the internet in real time. An alarm can also be sent to GPRS enabled mobile phone, a PC or an e-mail.
Manufactured from high quality materials and combining low energy consumption with quiet operation. Porkka modular cold rooms are the ideal choice for the storage of perishable products.
Environmentally friendly all Porkka modular panels and refrigeration units are CFC/HCFC free.
Porkka Modular Cold Rooms offer hundreds of rooms to select from A large comprehensive range with volumes up to 22m3
Porkka Modular Step-in Rooms are available in a
range of 81 different sizes with volumes from 1.2
up to 22m3. All are available to select in three
temperature variations with optional insulation
thickness and external heights. When this is
combined with unit positions and door options our
range is truly massive. This is why Porkka is the
perfect partner to work with as we are bound to
have a storage solution to suit your requirements.
Eccentric action cam-locks make
installation quick and easy.
room. If ok, place floor panels and/or fix plinth
on the floor.
the room. (Please note: read plan provided to
ensure that shelving pilaster are in the correct
position).
The roof is added last. At this point, tighten
cam-locks to floor and ceiling. (Please note:
cam-locks are provided on the refrigeration unit.
These must also be tightened).
Install shelving system and fit handle and
emergency entrapment release. Fill silicon mastic
(provided) in joints and smooth. Clean surfaces
with solvent provided. Connect cooling unit to
suitable power supply and monitor falling
temperature.
Porkka Modular Step-in Cold Rooms are easy and quick to assemble
Porkka modular insulated panels are
produced with male/female joints which
are equipped with eccentric action
cam-locks. This ensures good air-tight
joints.
and they should follow good health and
safety practices during assembly. Full
in-stallation instructions and components
Quick to assemble. Components and instructions included.
3 4
1 2
Device information Within the Porkka digital temperature display is a
circuit board equipped with a TTL connection.
A RS485 adapter is available as an optional extra.
The control unit uses Modbus RTU data transmis-
sion protocol. Items of refrigeration equipment are
connected to a Porkka XWEB computer (operating
system Linux). You may select from several models
which can monitor continuously up to 12 units, the
largest able to cope with up to 230 units. There are
also software solutions to cater for different
requirements.
A good idea is to digitally photograph each item of
equipment when installed, then the graphic user
interface can display real time information on the
equipment’s temperature and operation.
To connect to a network use a RJ-45 cable and
specify it to a fixed IP address. This will allow
continuous connection for several users. Smaller
users can connect the system to a telephone plug
via a modem, but only one user can access at any
one time.
independent network server complete with its own
ready-made web page. Information can be accessed either by
the internet, browser or a GPRS-enabled mobile phone.
Porkka can offer several versions to suit small to large
operators.
in real time. It continuously records temperature and alarm
data and will notify specific personnel of equipment failure.
The system can be accessed from any computer as software is
not required to gain entry to the programme.
Simple supervision Compared to traditional, passive monitoring the Porkka
XWEB offers real time temperature monitoring and alarm
notification, which can be integrated within an existing BMS
(Building Monitoring System). Browser facilities enable access
for holders with a username and password at several levels if
required. Information distribution to all relevant personnel is
also quick and easy.
Reduced operating costs Monitoring real time temperature data can give quick and
effective information on how a particular item of equipment
is being used. This in turn can allow the operator to control
the operation of the equipment more effectively and reduce
energy consumption. Maintenance personnel can also gain
valuable information from data, such as when servicing is
required. This also has the effect of reducing main component
failure which reduces overall running costs.
Intelligence = knowledge Porkka XWEB allows the operator to use the refrigeration
equipment being monitored more effectively which is better
for the environment. The system can, for example, record door
openings (for devices fitted with a door switch), defrost cycles
etc. This in turn can highlight critical points in the operation of
the equipment, for example, when doors are kept open for
too long when goods are being received. After training,
energy cost can be reduced.
Temperature range +2°C … +12°C +2°C … +12°C –2°C … + 5°C –2°C … + 5°C –22°C … –18°C –22°C … –18°C –22°C … –18°C
Volume < 12 m3 < 22 m3 < 12 m3 < 22 m3 < 11 m3 < 14 m3 < 22 m3
Connection power 0.72 kW 0.96 kW 1.11 kW 1.51 kW 1.33 kW 1.76 kW 2.08 kW
Connection power RHDS * 0.84 kW 1.09 kW 1.24 kW 1.64 kW 1.45 kW 1.89 kW 2.18 kW
Fusing 1 x 10 A 1 x 10 A 1 x 10 A 1 x 16 A 1 x 16 A 1 x 16 A 3 x 10 A
Voltage 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 400 V / 50 Hz
Cooling effect (CC) 1 330 W 1 870 W 1 240 W 1 800 W 1 310 W 1 590 W 2 210 W
Evaporating temperature (CC) –8°C –8°C –10°C –10°C –30°C –30°C –30°C
Ambient temperature +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C
Refrigerant R 404a R 404a R 404a R 404a
Machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 55 dB ( A ) 58 dB ( A ) 59 dB ( A )
RHDS machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 51 dB ( A ) 54 dB ( A ) 55 dB ( A )
RHDS fluid condenser RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 2 x RHDS 2160
Fluid condenser acoustic pressure at location 10m ( dB re 20 µPa ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 37 dB ( A )
Permitted temperature range at fluid condenser location –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C
Note: If there is a lack of ventilation or ambient temperatures are likely to remain above or below recommended levels for considerable periods of time please contact us for solutions. *Includes RHDS fluid condenser (E) = Available with R290 refrigerant (1.1.2012)
C950 C1240 M950 M1240 F850 F1140 F1540
Porkka refrigeration unit technical data
Machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 55 dB ( A ) 58 dB ( A ) 59 dB ( A )
RHDS machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 51 dB ( A ) 54 dB ( A ) 55 dB ( A )
RHDS fluid condenser RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 2 x RHDS 2160
Fluid condenser acoustic pressure at location 10m ( dB re 20 µPa ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 37 dB ( A )
Permitted temperature range at fluid condenser location –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C
C940 C1240 M940 M1240 F840 F1140 F1540
Depth
3,7 B **
4,2 B **
4,8 B** 5,9 B** 6,9 A** 8,9 A 10,1 A 11,2 A 12,3 A 8,0 A**
4,3 B **
5,5 B** 6,7 B** 8,0 B** 10,4 A 11,6 A 12,9 A 14,2 A 9,0 A
4,9 B **
14,9 A
5,4 B **
16,4 B
18,0 B
12,9 B
1,7 B** 2,6 B **
2,9 B **
3,5 A** 4,0 A** 4,8 A** 6,1 A** 7,0 A** 5,5 A**
1,4 B*/** 1,8 A */**
2,3 A */**
2,6 A*/** 3,1 A*/** 3,7 A*/** 4,9 A*/** 5,4 A*/**4,3 A*/**
2,2 B** 3,1 B **
3,6 B **
4,0 B** 5,0 A** 5,9 A** 7,6 A** 8,5 A 9,5 A 10,3 A6,7 A**
**Special shelf layout, height 2400mm
9,5 A** 10,3 A**
Depth 900 Depth 1200 Depth 1350 Depth 1500 Depth 1800 Depth 2100 Depth 2400 Depth 2700 Depth 3000 Depth 3300 Depth 3600
Width 1800
Width 2100
Width 2400
Width 2700
Width 3000
Width 3300
Width 3600
Width 1350
Width 1500
Width 1200 1,4 B* 1,8 A* 2,3 A* 2,6 A* 3,1 A* 3,7 A* 4,9 A* 5,4 A* 4,3 A*
1,6 B* 2,3 B* 2,9 A* 3,6 A* 4,2 A*
1,7 B* 2,6 B 2,9 B 3,5 A 4,0 A 4,8 A 6,1 A 7,0 A 5,5 A
2,2 B* 3,1 B 3,6 B 4,0 B 5,0 A 5,9 A 7,6 A 8,5 A 9,5 A** 10,3 A**6,7 A
3,7 B 4,2 B 4,8 B 5,9 B 6,9 A 8,9 A 10,1 A 11,2 A 12,3 A 8,0 A
4,3 B 5,5 B 6,7 B 8,0 B 10,4 A 11,6 A 12,9 A 14,2 A 9,0 A
4,9 B 6,1 B 7,6 B 8,9 B 11,8 A 13,3 A 14,7 A 16,0 A 10,4 B
5,4 B 7,0 B 8,5 B 10,1 B 13,3 B 14,9 A 16,4 A 18,0 A 11,6 B
9,5 B 11,2 B 14,7 B 16,4 B 12,9 B
10,3 B 12,3 B 16,0 B 18,0 B 14,2 B
18,0 A
13,3 A
*Available only in 80mm insulation thickness **Available with R290 refrigerant
Height 2100 or 2400mm (80mm insulation thickness) Height 2140 or 2440mm (100mm insulation thickness)
The Porkka RHDS unit is equipped with
a refrigerant-to-liquid heat exchanger.
to the water solution where it is
circulated to the condenser where the
heat is given up to the ambient air.
When placing Porkka modular rooms within a building, lack of
ventilation can cause heat to build up and increase running costs. The
solution is to use the Porkka Remote Heat Disposal System. Porkka’s
RHDS offers an easy and inexpensive method of transferring waste
heat produced by the refrigeration systems to either an external area
or an area where the warm air could be utilised. It is easy and quick to
install, with the additional benefit of being much quieter than fitting a
conventional condensing unit.
The RHDS system is similar to the standard Porkka unit with the
addition of a liquid condenser, header tank and pump. Water pipes are
then connected from the remote condenser to the refrigeration unit.
After connecting the system it is filled with a water glycol solution that
will operate in both summer and winter conditions. The multi-fix
condenser can be positioned either within an area that will benefit
from heat input or externally. The unit can be floor or wall mounted. In
addition the equipment benefits the environment by utilising a very
small refrigerant charge and reducing running costs.
Installation of the equipment is quick and easy and can be undertaken
by competent installers that do not necessarily have to be qualified
refrigeration engineers, though they are recommended. The RHDS can
be used throughout our standard range of rooms and at all
temperatures i.e. chilled, medium or freezer versions. For a standard
installation, a pipe can be run as much as 25 meters horizontally with
a maximum vertical lift of 4.5 meters within the run, the height of
which is measured from the pump within the refrigeration unit.
The RHDS system is efficient, silent and environment-friendly. Makes system surveillance easy, guides to energy efficient usage...
7. Manual defrost button
9. Light switch button with light to indicate ON mode
10. ON/OFF Stand-by mode button
11. Humidity control button
12. Probe display button
*Available only in 80mm insulation thickness **Available with R290 refrigerant
R 404a (C940) R 290 (C950)
R 404a (M940) R 290 (M950)
R 404a (F840) R 290 (F850)
EM A
DE SI
G N
2
Porkka Finland Oy Soisalmentie 3 FI-15860 Hollola, Finland Tel. +358 20 5555 12 Fax +358 20 5555 497 e-mail: porkka@huurre.com
Porkka Scandinavia AB Industrigatan 21 S-61933 Trosa, Sverige Hertfordshire, WD 18 9RG, UK Tel. +46 156 348 40 Fax +46 156 167 50 e-post: porkka@porkka.se www.porkka.se
where environment impact in production is kept to a minimum.
marked products. The manufacturer through continuous research and development reserves the right to change
Porkka Finland Oy reserves the right to make any changes without prior notice.
Porkka Finland Oy is an internationally recognised designer and manufacturer of Refrigeration and Food Storage/Display Equipment. The range incorporates Chilled, Frozen and Heated options. Major clients include commercial kitchens, restaurants, fast food outlets, hotels, industrial canteens, hospitals, laboratories and retailers throughout the World.
Our main markets outside of Finland include Scandinavia, United Kingdom, Germany, Switzerland, Holland, Belgium, Russia and the Baltic regions. 80% of the companies’ turnover is derived from foreign transactions and exports. On going and adaptive development by numerous foreign subsidiaries and representatives ensures our continued growth.
Porkka’s success is based on decades of experience, customer focused design and continuous product development.
Porkka Finland Oy is part of the Huurre Group. Porkka and Huurre brands are well known for their quality and reliability throughout the world.
Porkka Finland Oy is an internationally recognised designer and manufacturer of Refrigeration and Food Storage/Display Equipment
Porkka Norge AS Lensmannslia 30 N-1386 Asker, Norge Hertfordshire, WD 18 9RG, UK Tel. +47 66 98 77 77 Fax +47 66 98 77 88 e-post: salg@porkka.no www.porkka.no
Porkka (U.K.) Limited Unit 5, Olds Approach Tolpits Lane, Watford Hertfordshire, WD 18 9RG, UK Tel. +44 1923 77 99 29 Fax +44 1923 72 51 65 e-mail: sales@porkka.co.uk www.porkka.co.uk
1 112 3
4 5 612
1500 1800 2100
Porkka Remote Heat Disposal System (RHDS)
RHDS liquid to air condenser can be
wall, floor or roof mounted either
externally or ideally within an area
where the heat can be utilised such
as a warehouse, etc. Noise levels are
kept low as only fans are run on the
external unit.
New Unique Porkka Shelving System
Porkka has designed a totally new shelving system for our standard range of
rooms. We have focused on improved hygiene features, flexibility and greater
surface area, for more storage space. The support pilasters are fixed to the
insulated wall panels, which are positioned to allow easy all round cleaning of
the floor.
Four (4) tier shelving is supplied as standard. In rooms with a width up to
1500mm, shelving is supplied to two (2) walls and in rooms with greater
width, shelving is fitted to three (3) walls.
Installation is simple and quick. Place shelf support brackets at desired height,
fit support bars horizontally into the ready made openings and place shelving
inserts between the bars. The tough, strong inserts are produced from plastic
that is approved for use with foodstuffs. Even the largest shelving insert 300 x
462mm can fit into most commercial dishwashers.
It is also possible to purchase additional shelves which can be easily added at
a later date to facilitate further storage space.
The depth of rear wall shelving will be 488mm and dependent on room
model, the total depth of side wall shelving will be either 398 or 488mm.
The shelving can be evenly loaded with up to 70Kg per meter run i.e. 280 Kg
per 4 tier shelving meter run.
Easy-to-adjust shelves are strong and machine washable.
Shelf support brackets
together with horizontal
install and are designed to
be strong and durable
the floor level than in the
previous range. Sufficient
Shelf inserts have been
produced from high density,
durable plastic, which is
approved for use with
taken out and washed in a
dishwasher or by hand for
improved hygiene.
Porkka rooms are produced from modular CFC/HCFC-free
polyurethane insulated panels which are moulded with male / female
joints and held by eccentric action cam-locks, giving great all-round
strength. The visible exterior surfaces of the panels are coated with
durable scratch resistant polyester, which is classified as food safe.
Insulation thickness with excellent thermal efficiency is 80mm as
standard with an option of 100mm for freezer application if required.
Doors are semi-rebated and supplied with heavy duty hinges and a
lockable door handle with emergency entrapment release. Thresholds
and surrounds are produced from durable stainless steel with a heater
supplied for freezer application. Doors are already pre-mounted on a
panel for ease of assembly in the field.
Floors, when supplied, are insulated and have a strong marine
plywood surface, which is coated with a non-slip glass fibre resin.
Load limit for a standard floor max. 40 KN/m2 or max 1,0 KN/ per
40mm castor. Heavy duty floor with stainless steel surface available
as an additional accessory.
dimensions increase storage areas within our rooms.
Carefully planned materials and details Select from our extensive range, for a room to suit your requirements
Porkka cold rooms with volumes from 1.2 to 22m3.
Three temperature ranges; +2 to +8°C (adjustable in increments of 1°C) for chilled
produce. For the storage of fresh meat or fish use –2 to +5°C and for frozen select
–18 to –22°C.
Select floorless chill rooms for trolley operation. (Chill temperature only).
Medium and freezer rooms must be supplied with a floor which can be either recessed or with a ramp if a trolley is required.
Cooling units can be manufactured for placement either to the left or right hand side of the door and can also be made for connection to a central cooling system.
Door can be hung either left or right-hinged or changed in the field if required.
Standard external height 2100mm (note 2140mm if 100mm insulation selected) or 2400 / 2440mm.
4 tier fully adjustable shelving is supplied for either 2 or 3 walls depending on model selected. Standard shelves are made of ABS-plastics and can be washed in a commercial dishwasher. Stainless steel shelves are available as an additional accessory.
Decades of experience in the design, technology and production of high quality refrigeration equipment
Combined digital temperature display with built-in control functions
1. Compressor RUN light
3. Evaporator fan RUN light
4. Alarm activated light
The air inlet to the condenser is on the lower
part of the refrigeration unit, ensuring the
coolest air is always used helping to reduce
running costs and extending the service life
of the unit. The dust filter behind the air grill
is easy to clean or replace. The controller
provides information on when the filter
requires cleaning or changing.
Advanced HACCP monitoring features with a ready to use connection to a computer or building maintenance system.
HACCP
and Critical Control Point) properties enable
continuous and real-time temperature monitoring in compliance with the European Food Act being
implemented by many governments. For further information about our HACCP functions see page 13.
Alarm functions
The Porkka temperature display is supplied with a built-in high/low temperature alarm which
is both audible and visual and can also be connected to a building management system by
means of a volt free connection.
Trolley operation
To facilitate the use of trolleys, chill rooms can be supplied
without a floor. In this instance, the room is erected on an
insulated plinth and the door equipped with a sweeper gasket.
The installation package contains all components. Medium and
low temperature rooms must always be supplied with a floor. If
trolley use is essential, it is possible to recess the floor, or, if
above ground, supply an optional ramp. In either case, the doors
are fitted with a sweeper gasket.
Safety
The door is supplied with heavy duty hinges and a lockable door
handle with a luminous emergency entrapment release, which
overrides the lock at all times, should someone accidentally be
shut in the room. Door threshold and surround is fitted with a
heater to prevent freezing of the gasket to the frame in low
temperature models. If required floor panels can also be
supplied with built-in heaters to prevent freezing or moisture
damage below a larger freezer room.
Shelving system
The Porkka modular cold room shelving system is highly
practical and easy to clean. Standard shelving delivery includes
four (4) tier dishwasher safe polycarbonate (food safe) inserts
and supporting material. Shelving is supplied for either 2 or 3
walls dependent on model selected.
Cooling units produced in our own factory have been designed to be both powerful and energy efficient. Digital temperature displays have built-in high/low alarms which are both audible and visual. These can be connected via a volt free relay to a building management system. The controller is also equipped with HACCP features to meet the more stringent temperature monitoring regulations being enforced. The unit or units can be connected to an independent monitoring server and temperatures automatically recorded via the internet in real time. An alarm can also be sent to GPRS enabled mobile phone, a PC or an e-mail.
Manufactured from high quality materials and combining low energy consumption with quiet operation. Porkka modular cold rooms are the ideal choice for the storage of perishable products.
Environmentally friendly all Porkka modular panels and refrigeration units are CFC/HCFC free.
Porkka Modular Cold Rooms offer hundreds of rooms to select from A large comprehensive range with volumes up to 22m3
Porkka Modular Step-in Rooms are available in a
range of 81 different sizes with volumes from 1.2
up to 22m3. All are available to select in three
temperature variations with optional insulation
thickness and external heights. When this is
combined with unit positions and door options our
range is truly massive. This is why Porkka is the
perfect partner to work with as we are bound to
have a storage solution to suit your requirements.
Eccentric action cam-locks make
installation quick and easy.
room. If ok, place floor panels and/or fix plinth
on the floor.
the room. (Please note: read plan provided to
ensure that shelving pilaster are in the correct
position).
The roof is added last. At this point, tighten
cam-locks to floor and ceiling. (Please note:
cam-locks are provided on the refrigeration unit.
These must also be tightened).
Install shelving system and fit handle and
emergency entrapment release. Fill silicon mastic
(provided) in joints and smooth. Clean surfaces
with solvent provided. Connect cooling unit to
suitable power supply and monitor falling
temperature.
Porkka Modular Step-in Cold Rooms are easy and quick to assemble
Porkka modular insulated panels are
produced with male/female joints which
are equipped with eccentric action
cam-locks. This ensures good air-tight
joints.
and they should follow good health and
safety practices during assembly. Full
in-stallation instructions and components
Quick to assemble. Components and instructions included.
3 4
1 2
Device information Within the Porkka digital temperature display is a
circuit board equipped with a TTL connection.
A RS485 adapter is available as an optional extra.
The control unit uses Modbus RTU data transmis-
sion protocol. Items of refrigeration equipment are
connected to a Porkka XWEB computer (operating
system Linux). You may select from several models
which can monitor continuously up to 12 units, the
largest able to cope with up to 230 units. There are
also software solutions to cater for different
requirements.
A good idea is to digitally photograph each item of
equipment when installed, then the graphic user
interface can display real time information on the
equipment’s temperature and operation.
To connect to a network use a RJ-45 cable and
specify it to a fixed IP address. This will allow
continuous connection for several users. Smaller
users can connect the system to a telephone plug
via a modem, but only one user can access at any
one time.
independent network server complete with its own
ready-made web page. Information can be accessed either by
the internet, browser or a GPRS-enabled mobile phone.
Porkka can offer several versions to suit small to large
operators.
in real time. It continuously records temperature and alarm
data and will notify specific personnel of equipment failure.
The system can be accessed from any computer as software is
not required to gain entry to the programme.
Simple supervision Compared to traditional, passive monitoring the Porkka
XWEB offers real time temperature monitoring and alarm
notification, which can be integrated within an existing BMS
(Building Monitoring System). Browser facilities enable access
for holders with a username and password at several levels if
required. Information distribution to all relevant personnel is
also quick and easy.
Reduced operating costs Monitoring real time temperature data can give quick and
effective information on how a particular item of equipment
is being used. This in turn can allow the operator to control
the operation of the equipment more effectively and reduce
energy consumption. Maintenance personnel can also gain
valuable information from data, such as when servicing is
required. This also has the effect of reducing main component
failure which reduces overall running costs.
Intelligence = knowledge Porkka XWEB allows the operator to use the refrigeration
equipment being monitored more effectively which is better
for the environment. The system can, for example, record door
openings (for devices fitted with a door switch), defrost cycles
etc. This in turn can highlight critical points in the operation of
the equipment, for example, when doors are kept open for
too long when goods are being received. After training,
energy cost can be reduced.
Temperature range +2°C … +12°C +2°C … +12°C –2°C … + 5°C –2°C … + 5°C –22°C … –18°C –22°C … –18°C –22°C … –18°C
Volume < 12 m3 < 22 m3 < 12 m3 < 22 m3 < 11 m3 < 14 m3 < 22 m3
Connection power 0.72 kW 0.96 kW 1.11 kW 1.51 kW 1.33 kW 1.76 kW 2.08 kW
Connection power RHDS * 0.84 kW 1.09 kW 1.24 kW 1.64 kW 1.45 kW 1.89 kW 2.18 kW
Fusing 1 x 10 A 1 x 10 A 1 x 10 A 1 x 16 A 1 x 16 A 1 x 16 A 3 x 10 A
Voltage 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 400 V / 50 Hz
Cooling effect (CC) 1 330 W 1 870 W 1 240 W 1 800 W 1 310 W 1 590 W 2 210 W
Evaporating temperature (CC) –8°C –8°C –10°C –10°C –30°C –30°C –30°C
Ambient temperature +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C
Refrigerant R 404a R 404a R 404a R 404a
Machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 55 dB ( A ) 58 dB ( A ) 59 dB ( A )
RHDS machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 51 dB ( A ) 54 dB ( A ) 55 dB ( A )
RHDS fluid condenser RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 2 x RHDS 2160
Fluid condenser acoustic pressure at location 10m ( dB re 20 µPa ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 37 dB ( A )
Permitted temperature range at fluid condenser location –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C
Note: If there is a lack of ventilation or ambient temperatures are likely to remain above or below recommended levels for considerable periods of time please contact us for solutions. *Includes RHDS fluid condenser (E) = Available with R290 refrigerant (1.1.2012)
C950 C1240 M950 M1240 F850 F1140 F1540
Porkka refrigeration unit technical data
Machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 55 dB ( A ) 58 dB ( A ) 59 dB ( A )
RHDS machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 51 dB ( A ) 54 dB ( A ) 55 dB ( A )
RHDS fluid condenser RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 2 x RHDS 2160
Fluid condenser acoustic pressure at location 10m ( dB re 20 µPa ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 37 dB ( A )
Permitted temperature range at fluid condenser location –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C
C940 C1240 M940 M1240 F840 F1140 F1540
Depth
3,7 B **
4,2 B **
4,8 B** 5,9 B** 6,9 A** 8,9 A 10,1 A 11,2 A 12,3 A 8,0 A**
4,3 B **
5,5 B** 6,7 B** 8,0 B** 10,4 A 11,6 A 12,9 A 14,2 A 9,0 A
4,9 B **
14,9 A
5,4 B **
16,4 B
18,0 B
12,9 B
1,7 B** 2,6 B **
2,9 B **
3,5 A** 4,0 A** 4,8 A** 6,1 A** 7,0 A** 5,5 A**
1,4 B*/** 1,8 A */**
2,3 A */**
2,6 A*/** 3,1 A*/** 3,7 A*/** 4,9 A*/** 5,4 A*/**4,3 A*/**
2,2 B** 3,1 B **
3,6 B **
4,0 B** 5,0 A** 5,9 A** 7,6 A** 8,5 A 9,5 A 10,3 A6,7 A**
**Special shelf layout, height 2400mm
9,5 A** 10,3 A**
Depth 900 Depth 1200 Depth 1350 Depth 1500 Depth 1800 Depth 2100 Depth 2400 Depth 2700 Depth 3000 Depth 3300 Depth 3600
Width 1800
Width 2100
Width 2400
Width 2700
Width 3000
Width 3300
Width 3600
Width 1350
Width 1500
Width 1200 1,4 B* 1,8 A* 2,3 A* 2,6 A* 3,1 A* 3,7 A* 4,9 A* 5,4 A* 4,3 A*
1,6 B* 2,3 B* 2,9 A* 3,6 A* 4,2 A*
1,7 B* 2,6 B 2,9 B 3,5 A 4,0 A 4,8 A 6,1 A 7,0 A 5,5 A
2,2 B* 3,1 B 3,6 B 4,0 B 5,0 A 5,9 A 7,6 A 8,5 A 9,5 A** 10,3 A**6,7 A
3,7 B 4,2 B 4,8 B 5,9 B 6,9 A 8,9 A 10,1 A 11,2 A 12,3 A 8,0 A
4,3 B 5,5 B 6,7 B 8,0 B 10,4 A 11,6 A 12,9 A 14,2 A 9,0 A
4,9 B 6,1 B 7,6 B 8,9 B 11,8 A 13,3 A 14,7 A 16,0 A 10,4 B
5,4 B 7,0 B 8,5 B 10,1 B 13,3 B 14,9 A 16,4 A 18,0 A 11,6 B
9,5 B 11,2 B 14,7 B 16,4 B 12,9 B
10,3 B 12,3 B 16,0 B 18,0 B 14,2 B
18,0 A
13,3 A
*Available only in 80mm insulation thickness **Available with R290 refrigerant
Height 2100 or 2400mm (80mm insulation thickness) Height 2140 or 2440mm (100mm insulation thickness)
The Porkka RHDS unit is equipped with
a refrigerant-to-liquid heat exchanger.
to the water solution where it is
circulated to the condenser where the
heat is given up to the ambient air.
When placing Porkka modular rooms within a building, lack of
ventilation can cause heat to build up and increase running costs. The
solution is to use the Porkka Remote Heat Disposal System. Porkka’s
RHDS offers an easy and inexpensive method of transferring waste
heat produced by the refrigeration systems to either an external area
or an area where the warm air could be utilised. It is easy and quick to
install, with the additional benefit of being much quieter than fitting a
conventional condensing unit.
The RHDS system is similar to the standard Porkka unit with the
addition of a liquid condenser, header tank and pump. Water pipes are
then connected from the remote condenser to the refrigeration unit.
After connecting the system it is filled with a water glycol solution that
will operate in both summer and winter conditions. The multi-fix
condenser can be positioned either within an area that will benefit
from heat input or externally. The unit can be floor or wall mounted. In
addition the equipment benefits the environment by utilising a very
small refrigerant charge and reducing running costs.
Installation of the equipment is quick and easy and can be undertaken
by competent installers that do not necessarily have to be qualified
refrigeration engineers, though they are recommended. The RHDS can
be used throughout our standard range of rooms and at all
temperatures i.e. chilled, medium or freezer versions. For a standard
installation, a pipe can be run as much as 25 meters horizontally with
a maximum vertical lift of 4.5 meters within the run, the height of
which is measured from the pump within the refrigeration unit.
The RHDS system is efficient, silent and environment-friendly. Makes system surveillance easy, guides to energy efficient usage...
7. Manual defrost button
9. Light switch button with light to indicate ON mode
10. ON/OFF Stand-by mode button
11. Humidity control button
12. Probe display button
*Available only in 80mm insulation thickness **Available with R290 refrigerant
R 404a (C940) R 290 (C950)
R 404a (M940) R 290 (M950)
R 404a (F840) R 290 (F850)
EM A
DE SI
G N
2
Porkka Finland Oy Soisalmentie 3 FI-15860 Hollola, Finland Tel. +358 20 5555 12 Fax +358 20 5555 497 e-mail: porkka@huurre.com
Porkka Scandinavia AB Industrigatan 21 S-61933 Trosa, Sverige Hertfordshire, WD 18 9RG, UK Tel. +46 156 348 40 Fax +46 156 167 50 e-post: porkka@porkka.se www.porkka.se
where environment impact in production is kept to a minimum.
marked products. The manufacturer through continuous research and development reserves the right to change
Porkka Finland Oy reserves the right to make any changes without prior notice.
Porkka Finland Oy is an internationally recognised designer and manufacturer of Refrigeration and Food Storage/Display Equipment. The range incorporates Chilled, Frozen and Heated options. Major clients include commercial kitchens, restaurants, fast food outlets, hotels, industrial canteens, hospitals, laboratories and retailers throughout the World.
Our main markets outside of Finland include Scandinavia, United Kingdom, Germany, Switzerland, Holland, Belgium, Russia and the Baltic regions. 80% of the companies’ turnover is derived from foreign transactions and exports. On going and adaptive development by numerous foreign subsidiaries and representatives ensures our continued growth.
Porkka’s success is based on decades of experience, customer focused design and continuous product development.
Porkka Finland Oy is part of the Huurre Group. Porkka and Huurre brands are well known for their quality and reliability throughout the world.
Porkka Finland Oy is an internationally recognised designer and manufacturer of Refrigeration and Food Storage/Display Equipment
Porkka Norge AS Lensmannslia 30 N-1386 Asker, Norge Hertfordshire, WD 18 9RG, UK Tel. +47 66 98 77 77 Fax +47 66 98 77 88 e-post: salg@porkka.no www.porkka.no
Porkka (U.K.) Limited Unit 5, Olds Approach Tolpits Lane, Watford Hertfordshire, WD 18 9RG, UK Tel. +44 1923 77 99 29 Fax +44 1923 72 51 65 e-mail: sales@porkka.co.uk www.porkka.co.uk
1 112 3
4 5 612
1500 1800 2100
Porkka Remote Heat Disposal System (RHDS)
RHDS liquid to air condenser can be
wall, floor or roof mounted either
externally or ideally within an area
where the heat can be utilised such
as a warehouse, etc. Noise levels are
kept low as only fans are run on the
external unit.
New Unique Porkka Shelving System
Porkka has designed a totally new shelving system for our standard range of
rooms. We have focused on improved hygiene features, flexibility and greater
surface area, for more storage space. The support pilasters are fixed to the
insulated wall panels, which are positioned to allow easy all round cleaning of
the floor.
Four (4) tier shelving is supplied as standard. In rooms with a width up to
1500mm, shelving is supplied to two (2) walls and in rooms with greater
width, shelving is fitted to three (3) walls.
Installation is simple and quick. Place shelf support brackets at desired height,
fit support bars horizontally into the ready made openings and place shelving
inserts between the bars. The tough, strong inserts are produced from plastic
that is approved for use with foodstuffs. Even the largest shelving insert 300 x
462mm can fit into most commercial dishwashers.
It is also possible to purchase additional shelves which can be easily added at
a later date to facilitate further storage space.
The depth of rear wall shelving will be 488mm and dependent on room
model, the total depth of side wall shelving will be either 398 or 488mm.
The shelving can be evenly loaded with up to 70Kg per meter run i.e. 280 Kg
per 4 tier shelving meter run.
Easy-to-adjust shelves are strong and machine washable.
Shelf support brackets
together with horizontal
install and are designed to
be strong and durable
the floor level than in the
previous range. Sufficient
Shelf inserts have been
produced from high density,
durable plastic, which is
approved for use with
taken out and washed in a
dishwasher or by hand for
improved hygiene.
Porkka rooms are produced from modular CFC/HCFC-free
polyurethane insulated panels which are moulded with male / female
joints and held by eccentric action cam-locks, giving great all-round
strength. The visible exterior surfaces of the panels are coated with
durable scratch resistant polyester, which is classified as food safe.
Insulation thickness with excellent thermal efficiency is 80mm as
standard with an option of 100mm for freezer application if required.
Doors are semi-rebated and supplied with heavy duty hinges and a
lockable door handle with emergency entrapment release. Thresholds
and surrounds are produced from durable stainless steel with a heater
supplied for freezer application. Doors are already pre-mounted on a
panel for ease of assembly in the field.
Floors, when supplied, are insulated and have a strong marine
plywood surface, which is coated with a non-slip glass fibre resin.
Load limit for a standard floor max. 40 KN/m2 or max 1,0 KN/ per
40mm castor. Heavy duty floor with stainless steel surface available
as an additional accessory.
dimensions increase storage areas within our rooms.
Carefully planned materials and details Select from our extensive range, for a room to suit your requirements
Porkka cold rooms with volumes from 1.2 to 22m3.
Three temperature ranges; +2 to +8°C (adjustable in increments of 1°C) for chilled
produce. For the storage of fresh meat or fish use –2 to +5°C and for frozen select
–18 to –22°C.
Select floorless chill rooms for trolley operation. (Chill temperature only).
Medium and freezer rooms must be supplied with a floor which can be either recessed or with a ramp if a trolley is required.
Cooling units can be manufactured for placement either to the left or right hand side of the door and can also be made for connection to a central cooling system.
Door can be hung either left or right-hinged or changed in the field if required.
Standard external height 2100mm (note 2140mm if 100mm insulation selected) or 2400 / 2440mm.
4 tier fully adjustable shelving is supplied for either 2 or 3 walls depending on model selected. Standard shelves are made of ABS-plastics and can be washed in a commercial dishwasher. Stainless steel shelves are available as an additional accessory.
Decades of experience in the design, technology and production of high quality refrigeration equipment
Combined digital temperature display with built-in control functions
1. Compressor RUN light
3. Evaporator fan RUN light
4. Alarm activated light
The air inlet to the condenser is on the lower
part of the refrigeration unit, ensuring the
coolest air is always used helping to reduce
running costs and extending the service life
of the unit. The dust filter behind the air grill
is easy to clean or replace. The controller
provides information on when the filter
requires cleaning or changing.
Advanced HACCP monitoring features with a ready to use connection to a computer or building maintenance system.
HACCP
and Critical Control Point) properties enable
continuous and real-time temperature monitoring in compliance with the European Food Act being
implemented by many governments. For further information about our HACCP functions see page 13.
Alarm functions
The Porkka temperature display is supplied with a built-in high/low temperature alarm which
is both audible and visual and can also be connected to a building management system by
means of a volt free connection.
Trolley operation
To facilitate the use of trolleys, chill rooms can be supplied
without a floor. In this instance, the room is erected on an
insulated plinth and the door equipped with a sweeper gasket.
The installation package contains all components. Medium and
low temperature rooms must always be supplied with a floor. If
trolley use is essential, it is possible to recess the floor, or, if
above ground, supply an optional ramp. In either case, the doors
are fitted with a sweeper gasket.
Safety
The door is supplied with heavy duty hinges and a lockable door
handle with a luminous emergency entrapment release, which
overrides the lock at all times, should someone accidentally be
shut in the room. Door threshold and surround is fitted with a
heater to prevent freezing of the gasket to the frame in low
temperature models. If required floor panels can also be
supplied with built-in heaters to prevent freezing or moisture
damage below a larger freezer room.
Shelving system
The Porkka modular cold room shelving system is highly
practical and easy to clean. Standard shelving delivery includes
four (4) tier dishwasher safe polycarbonate (food safe) inserts
and supporting material. Shelving is supplied for either 2 or 3
walls dependent on model selected.
Cooling units produced in our own factory have been designed to be both powerful and energy efficient. Digital temperature displays have built-in high/low alarms which are both audible and visual. These can be connected via a volt free relay to a building management system. The controller is also equipped with HACCP features to meet the more stringent temperature monitoring regulations being enforced. The unit or units can be connected to an independent monitoring server and temperatures automatically recorded via the internet in real time. An alarm can also be sent to GPRS enabled mobile phone, a PC or an e-mail.
Manufactured from high quality materials and combining low energy consumption with quiet operation. Porkka modular cold rooms are the ideal choice for the storage of perishable products.
Environmentally friendly all Porkka modular panels and refrigeration units are CFC/HCFC free.
Porkka Modular Cold Rooms offer hundreds of rooms to select from A large comprehensive range with volumes up to 22m3
Porkka Modular Step-in Rooms are available in a
range of 81 different sizes with volumes from 1.2
up to 22m3. All are available to select in three
temperature variations with optional insulation
thickness and external heights. When this is
combined with unit positions and door options our
range is truly massive. This is why Porkka is the
perfect partner to work with as we are bound to
have a storage solution to suit your requirements.
Eccentric action cam-locks make
installation quick and easy.
room. If ok, place floor panels and/or fix plinth
on the floor.
the room. (Please note: read plan provided to
ensure that shelving pilaster are in the correct
position).
The roof is added last. At this point, tighten
cam-locks to floor and ceiling. (Please note:
cam-locks are provided on the refrigeration unit.
These must also be tightened).
Install shelving system and fit handle and
emergency entrapment release. Fill silicon mastic
(provided) in joints and smooth. Clean surfaces
with solvent provided. Connect cooling unit to
suitable power supply and monitor falling
temperature.
Porkka Modular Step-in Cold Rooms are easy and quick to assemble
Porkka modular insulated panels are
produced with male/female joints which
are equipped with eccentric action
cam-locks. This ensures good air-tight
joints.
and they should follow good health and
safety practices during assembly. Full
in-stallation instructions and components
Quick to assemble. Components and instructions included.
3 4
1 2
Device information Within the Porkka digital temperature display is a
circuit board equipped with a TTL connection.
A RS485 adapter is available as an optional extra.
The control unit uses Modbus RTU data transmis-
sion protocol. Items of refrigeration equipment are
connected to a Porkka XWEB computer (operating
system Linux). You may select from several models
which can monitor continuously up to 12 units, the
largest able to cope with up to 230 units. There are
also software solutions to cater for different
requirements.
A good idea is to digitally photograph each item of
equipment when installed, then the graphic user
interface can display real time information on the
equipment’s temperature and operation.
To connect to a network use a RJ-45 cable and
specify it to a fixed IP address. This will allow
continuous connection for several users. Smaller
users can connect the system to a telephone plug
via a modem, but only one user can access at any
one time.
independent network server complete with its own
ready-made web page. Information can be accessed either by
the internet, browser or a GPRS-enabled mobile phone.
Porkka can offer several versions to suit small to large
operators.
in real time. It continuously records temperature and alarm
data and will notify specific personnel of equipment failure.
The system can be accessed from any computer as software is
not required to gain entry to the programme.
Simple supervision Compared to traditional, passive monitoring the Porkka
XWEB offers real time temperature monitoring and alarm
notification, which can be integrated within an existing BMS
(Building Monitoring System). Browser facilities enable access
for holders with a username and password at several levels if
required. Information distribution to all relevant personnel is
also quick and easy.
Reduced operating costs Monitoring real time temperature data can give quick and
effective information on how a particular item of equipment
is being used. This in turn can allow the operator to control
the operation of the equipment more effectively and reduce
energy consumption. Maintenance personnel can also gain
valuable information from data, such as when servicing is
required. This also has the effect of reducing main component
failure which reduces overall running costs.
Intelligence = knowledge Porkka XWEB allows the operator to use the refrigeration
equipment being monitored more effectively which is better
for the environment. The system can, for example, record door
openings (for devices fitted with a door switch), defrost cycles
etc. This in turn can highlight critical points in the operation of
the equipment, for example, when doors are kept open for
too long when goods are being received. After training,
energy cost can be reduced.
Temperature range +2°C … +12°C +2°C … +12°C –2°C … + 5°C –2°C … + 5°C –22°C … –18°C –22°C … –18°C –22°C … –18°C
Volume < 12 m3 < 22 m3 < 12 m3 < 22 m3 < 11 m3 < 14 m3 < 22 m3
Connection power 0.72 kW 0.96 kW 1.11 kW 1.51 kW 1.33 kW 1.76 kW 2.08 kW
Connection power RHDS * 0.84 kW 1.09 kW 1.24 kW 1.64 kW 1.45 kW 1.89 kW 2.18 kW
Fusing 1 x 10 A 1 x 10 A 1 x 10 A 1 x 16 A 1 x 16 A 1 x 16 A 3 x 10 A
Voltage 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 400 V / 50 Hz
Cooling effect (CC) 1 330 W 1 870 W 1 240 W 1 800 W 1 310 W 1 590 W 2 210 W
Evaporating temperature (CC) –8°C –8°C –10°C –10°C –30°C –30°C –30°C
Ambient temperature +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C
Refrigerant R 404a R 404a R 404a R 404a
Machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 55 dB ( A ) 58 dB ( A ) 59 dB ( A )
RHDS machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 51 dB ( A ) 54 dB ( A ) 55 dB ( A )
RHDS fluid condenser RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 2 x RHDS 2160
Fluid condenser acoustic pressure at location 10m ( dB re 20 µPa ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 37 dB ( A )
Permitted temperature range at fluid condenser location –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C
Note: If there is a lack of ventilation or ambient temperatures are likely to remain above or below recommended levels for considerable periods of time please contact us for solutions. *Includes RHDS fluid condenser (E) = Available with R290 refrigerant (1.1.2012)
C950 C1240 M950 M1240 F850 F1140 F1540
Porkka refrigeration unit technical data
Machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 55 dB ( A ) 58 dB ( A ) 59 dB ( A )
RHDS machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 51 dB ( A ) 54 dB ( A ) 55 dB ( A )
RHDS fluid condenser RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 2 x RHDS 2160
Fluid condenser acoustic pressure at location 10m ( dB re 20 µPa ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 37 dB ( A )
Permitted temperature range at fluid condenser location –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C
C940 C1240 M940 M1240 F840 F1140 F1540
Depth
3,7 B **
4,2 B **
4,8 B** 5,9 B** 6,9 A** 8,9 A 10,1 A 11,2 A 12,3 A 8,0 A**
4,3 B **
5,5 B** 6,7 B** 8,0 B** 10,4 A 11,6 A 12,9 A 14,2 A 9,0 A
4,9 B **
14,9 A
5,4 B **
16,4 B
18,0 B
12,9 B
1,7 B** 2,6 B **
2,9 B **
3,5 A** 4,0 A** 4,8 A** 6,1 A** 7,0 A** 5,5 A**
1,4 B*/** 1,8 A */**
2,3 A */**
2,6 A*/** 3,1 A*/** 3,7 A*/** 4,9 A*/** 5,4 A*/**4,3 A*/**
2,2 B** 3,1 B **
3,6 B **
4,0 B** 5,0 A** 5,9 A** 7,6 A** 8,5 A 9,5 A 10,3 A6,7 A**
**Special shelf layout, height 2400mm
9,5 A** 10,3 A**
Depth 900 Depth 1200 Depth 1350 Depth 1500 Depth 1800 Depth 2100 Depth 2400 Depth 2700 Depth 3000 Depth 3300 Depth 3600
Width 1800
Width 2100
Width 2400
Width 2700
Width 3000
Width 3300
Width 3600
Width 1350
Width 1500
Width 1200 1,4 B* 1,8 A* 2,3 A* 2,6 A* 3,1 A* 3,7 A* 4,9 A* 5,4 A* 4,3 A*
1,6 B* 2,3 B* 2,9 A* 3,6 A* 4,2 A*
1,7 B* 2,6 B 2,9 B 3,5 A 4,0 A 4,8 A 6,1 A 7,0 A 5,5 A
2,2 B* 3,1 B 3,6 B 4,0 B 5,0 A 5,9 A 7,6 A 8,5 A 9,5 A** 10,3 A**6,7 A
3,7 B 4,2 B 4,8 B 5,9 B 6,9 A 8,9 A 10,1 A 11,2 A 12,3 A 8,0 A
4,3 B 5,5 B 6,7 B 8,0 B 10,4 A 11,6 A 12,9 A 14,2 A 9,0 A
4,9 B 6,1 B 7,6 B 8,9 B 11,8 A 13,3 A 14,7 A 16,0 A 10,4 B
5,4 B 7,0 B 8,5 B 10,1 B 13,3 B 14,9 A 16,4 A 18,0 A 11,6 B
9,5 B 11,2 B 14,7 B 16,4 B 12,9 B
10,3 B 12,3 B 16,0 B 18,0 B 14,2 B
18,0 A
13,3 A
*Available only in 80mm insulation thickness **Available with R290 refrigerant
Height 2100 or 2400mm (80mm insulation thickness) Height 2140 or 2440mm (100mm insulation thickness)
The Porkka RHDS unit is equipped with
a refrigerant-to-liquid heat exchanger.
to the water solution where it is
circulated to the condenser where the
heat is given up to the ambient air.
When placing Porkka modular rooms within a building, lack of
ventilation can cause heat to build up and increase running costs. The
solution is to use the Porkka Remote Heat Disposal System. Porkka’s
RHDS offers an easy and inexpensive method of transferring waste
heat produced by the refrigeration systems to either an external area
or an area where the warm air could be utilised. It is easy and quick to
install, with the additional benefit of being much quieter than fitting a
conventional condensing unit.
The RHDS system is similar to the standard Porkka unit with the
addition of a liquid condenser, header tank and pump. Water pipes are
then connected from the remote condenser to the refrigeration unit.
After connecting the system it is filled with a water glycol solution that
will operate in both summer and winter conditions. The multi-fix
condenser can be positioned either within an area that will benefit
from heat input or externally. The unit can be floor or wall mounted. In
addition the equipment benefits the environment by utilising a very
small refrigerant charge and reducing running costs.
Installation of the equipment is quick and easy and can be undertaken
by competent installers that do not necessarily have to be qualified
refrigeration engineers, though they are recommended. The RHDS can
be used throughout our standard range of rooms and at all
temperatures i.e. chilled, medium or freezer versions. For a standard
installation, a pipe can be run as much as 25 meters horizontally with
a maximum vertical lift of 4.5 meters within the run, the height of
which is measured from the pump within the refrigeration unit.
The RHDS system is efficient, silent and environment-friendly. Makes system surveillance easy, guides to energy efficient usage...
7. Manual defrost button
9. Light switch button with light to indicate ON mode
10. ON/OFF Stand-by mode button
11. Humidity control button
12. Probe display button
*Available only in 80mm insulation thickness **Available with R290 refrigerant
R 404a (C940) R 290 (C950)
R 404a (M940) R 290 (M950)
R 404a (F840) R 290 (F850)
EM A
DE SI
G N
2
Porkka Finland Oy Soisalmentie 3 FI-15860 Hollola, Finland Tel. +358 20 5555 12 Fax +358 20 5555 497 e-mail: porkka@huurre.com
Porkka Scandinavia AB Industrigatan 21 S-61933 Trosa, Sverige Hertfordshire, WD 18 9RG, UK Tel. +46 156 348 40 Fax +46 156 167 50 e-post: porkka@porkka.se www.porkka.se
where environment impact in production is kept to a minimum.
marked products. The manufacturer through continuous research and development reserves the right to change
Porkka Finland Oy reserves the right to make any changes without prior notice.
Porkka Finland Oy is an internationally recognised designer and manufacturer of Refrigeration and Food Storage/Display Equipment. The range incorporates Chilled, Frozen and Heated options. Major clients include commercial kitchens, restaurants, fast food outlets, hotels, industrial canteens, hospitals, laboratories and retailers throughout the World.
Our main markets outside of Finland include Scandinavia, United Kingdom, Germany, Switzerland, Holland, Belgium, Russia and the Baltic regions. 80% of the companies’ turnover is derived from foreign transactions and exports. On going and adaptive development by numerous foreign subsidiaries and representatives ensures our continued growth.
Porkka’s success is based on decades of experience, customer focused design and continuous product development.
Porkka Finland Oy is part of the Huurre Group. Porkka and Huurre brands are well known for their quality and reliability throughout the world.
Porkka Finland Oy is an internationally recognised designer and manufacturer of Refrigeration and Food Storage/Display Equipment
Porkka Norge AS Lensmannslia 30 N-1386 Asker, Norge Hertfordshire, WD 18 9RG, UK Tel. +47 66 98 77 77 Fax +47 66 98 77 88 e-post: salg@porkka.no www.porkka.no
Porkka (U.K.) Limited Unit 5, Olds Approach Tolpits Lane, Watford Hertfordshire, WD 18 9RG, UK Tel. +44 1923 77 99 29 Fax +44 1923 72 51 65 e-mail: sales@porkka.co.uk www.porkka.co.uk
1 112 3
4 5 612
1500 1800 2100
Porkka Remote Heat Disposal System (RHDS)
RHDS liquid to air condenser can be
wall, floor or roof mounted either
externally or ideally within an area
where the heat can be utilised such
as a warehouse, etc. Noise levels are
kept low as only fans are run on the
external unit.
New Unique Porkka Shelving System
Porkka has designed a totally new shelving system for our standard range of
rooms. We have focused on improved hygiene features, flexibility and greater
surface area, for more storage space. The support pilasters are fixed to the
insulated wall panels, which are positioned to allow easy all round cleaning of
the floor.
Four (4) tier shelving is supplied as standard. In rooms with a width up to
1500mm, shelving is supplied to two (2) walls and in rooms with greater
width, shelving is fitted to three (3) walls.
Installation is simple and quick. Place shelf support brackets at desired height,
fit support bars horizontally into the ready made openings and place shelving
inserts between the bars. The tough, strong inserts are produced from plastic
that is approved for use with foodstuffs. Even the largest shelving insert 300 x
462mm can fit into most commercial dishwashers.
It is also possible to purchase additional shelves which can be easily added at
a later date to facilitate further storage space.
The depth of rear wall shelving will be 488mm and dependent on room
model, the total depth of side wall shelving will be either 398 or 488mm.
The shelving can be evenly loaded with up to 70Kg per meter run i.e. 280 Kg
per 4 tier shelving meter run.
Easy-to-adjust shelves are strong and machine washable.
Shelf support brackets
together with horizontal
install and are designed to
be strong and durable
the floor level than in the
previous range. Sufficient
Shelf inserts have been
produced from high density,
durable plastic, which is
approved for use with
taken out and washed in a
dishwasher or by hand for
improved hygiene.
Porkka rooms are produced from modular CFC/HCFC-free
polyurethane insulated panels which are moulded with male / female
joints and held by eccentric action cam-locks, giving great all-round
strength. The visible exterior surfaces of the panels are coated with
durable scratch resistant polyester, which is classified as food safe.
Insulation thickness with excellent thermal efficiency is 80mm as
standard with an option of 100mm for freezer application if required.
Doors are semi-rebated and supplied with heavy duty hinges and a
lockable door handle with emergency entrapment release. Thresholds
and surrounds are produced from durable stainless steel with a heater
supplied for freezer application. Doors are already pre-mounted on a
panel for ease of assembly in the field.
Floors, when supplied, are insulated and have a strong marine
plywood surface, which is coated with a non-slip glass fibre resin.
Load limit for a standard floor max. 40 KN/m2 or max 1,0 KN/ per
40mm castor. Heavy duty floor with stainless steel surface available
as an additional accessory.
dimensions increase storage areas within our rooms.
Carefully planned materials and details Select from our extensive range, for a room to suit your requirements
Porkka cold rooms with volumes from 1.2 to 22m3.
Three temperature ranges; +2 to +8°C (adjustable in increments of 1°C) for chilled
produce. For the storage of fresh meat or fish use –2 to +5°C and for frozen select
–18 to –22°C.
Select floorless chill rooms for trolley operation. (Chill temperature only).
Medium and freezer rooms must be supplied with a floor which can be either recessed or with a ramp if a trolley is required.
Cooling units can be manufactured for placement either to the left or right hand side of the door and can also be made for connection to a central cooling system.
Door can be hung either left or right-hinged or changed in the field if required.
Standard external height 2100mm (note 2140mm if 100mm insulation selected) or 2400 / 2440mm.
4 tier fully adjustable shelving is supplied for either 2 or 3 walls depending on model selected. Standard shelves are made of ABS-plastics and can be washed in a commercial dishwasher. Stainless steel shelves are available as an additional accessory.
Decades of experience in the design, technology and production of high quality refrigeration equipment
Combined digital temperature display with built-in control functions
1. Compressor RUN light
3. Evaporator fan RUN light
4. Alarm activated light
The air inlet to the condenser is on the lower
part of the refrigeration unit, ensuring the
coolest air is always used helping to reduce
running costs and extending the service life
of the unit. The dust filter behind the air grill
is easy to clean or replace. The controller
provides information on when the filter
requires cleaning or changing.
Advanced HACCP monitoring features with a ready to use connection to a computer or building maintenance system.
HACCP
and Critical Control Point) properties enable
continuous and real-time temperature monitoring in compliance with the European Food Act being
implemented by many governments. For further information about our HACCP functions see page 13.
Alarm functions
The Porkka temperature display is supplied with a built-in high/low temperature alarm which
is both audible and visual and can also be connected to a building management system by
means of a volt free connection.
Trolley operation
To facilitate the use of trolleys, chill rooms can be supplied
without a floor. In this instance, the room is erected on an
insulated plinth and the door equipped with a sweeper gasket.
The installation package contains all components. Medium and
low temperature rooms must always be supplied with a floor. If
trolley use is essential, it is possible to recess the floor, or, if
above ground, supply an optional ramp. In either case, the doors
are fitted with a sweeper gasket.
Safety
The door is supplied with heavy duty hinges and a lockable door
handle with a luminous emergency entrapment release, which
overrides the lock at all times, should someone accidentally be
shut in the room. Door threshold and surround is fitted with a
heater to prevent freezing of the gasket to the frame in low
temperature models. If required floor panels can also be
supplied with built-in heaters to prevent freezing or moisture
damage below a larger freezer room.
Shelving system
The Porkka modular cold room shelving system is highly
practical and easy to clean. Standard shelving delivery includes
four (4) tier dishwasher safe polycarbonate (food safe) inserts
and supporting material. Shelving is supplied for either 2 or 3
walls dependent on model selected.
Cooling units produced in our own factory have been designed to be both powerful and energy efficient. Digital temperature displays have built-in high/low alarms which are both audible and visual. These can be connected via a volt free relay to a building management system. The controller is also equipped with HACCP features to meet the more stringent temperature monitoring regulations being enforced. The unit or units can be connected to an independent monitoring server and temperatures automatically recorded via the internet in real time. An alarm can also be sent to GPRS enabled mobile phone, a PC or an e-mail.
Manufactured from high quality materials and combining low energy consumption with quiet operation. Porkka modular cold rooms are the ideal choice for the storage of perishable products.
Environmentally friendly all Porkka modular panels and refrigeration units are CFC/HCFC free.
Porkka Modular Cold Rooms offer hundreds of rooms to select from A large comprehensive range with volumes up to 22m3
Porkka Modular Step-in Rooms are available in a
range of 81 different sizes with volumes from 1.2
up to 22m3. All are available to select in three
temperature variations with optional insulation
thickness and external heights. When this is
combined with unit positions and door options our
range is truly massive. This is why Porkka is the
perfect partner to work with as we are bound to
have a storage solution to suit your requirements.
Eccentric action cam-locks make
installation quick and easy.
room. If ok, place floor panels and/or fix plinth
on the floor.
the room. (Please note: read plan provided to
ensure that shelving pilaster are in the correct
position).
The roof is added last. At this point, tighten
cam-locks to floor and ceiling. (Please note:
cam-locks are provided on the refrigeration unit.
These must also be tightened).
Install shelving system and fit handle and
emergency entrapment release. Fill silicon mastic
(provided) in joints and smooth. Clean surfaces
with solvent provided. Connect cooling unit to
suitable power supply and monitor falling
temperature.
Porkka Modular Step-in Cold Rooms are easy and quick to assemble
Porkka modular insulated panels are
produced with male/female joints which
are equipped with eccentric action
cam-locks. This ensures good air-tight
joints.
and they should follow good health and
safety practices during assembly. Full
in-stallation instructions and components
Quick to assemble. Components and instructions included.
3 4
1 2
Device information Within the Porkka digital temperature display is a
circuit board equipped with a TTL connection.
A RS485 adapter is available as an optional extra.
The control unit uses Modbus RTU data transmis-
sion protocol. Items of refrigeration equipment are
connected to a Porkka XWEB computer (operating
system Linux). You may select from several models
which can monitor continuously up to 12 units, the
largest able to cope with up to 230 units. There are
also software solutions to cater for different
requirements.
A good idea is to digitally photograph each item of
equipment when installed, then the graphic user
interface can display real time information on the
equipment’s temperature and operation.
To connect to a network use a RJ-45 cable and
specify it to a fixed IP address. This will allow
continuous connection for several users. Smaller
users can connect the system to a telephone plug
via a modem, but only one user can access at any
one time.
independent network server complete with its own
ready-made web page. Information can be accessed either by
the internet, browser or a GPRS-enabled mobile phone.
Porkka can offer several versions to suit small to large
operators.
in real time. It continuously records temperature and alarm
data and will notify specific personnel of equipment failure.
The system can be accessed from any computer as software is
not required to gain entry to the programme.
Simple supervision Compared to traditional, passive monitoring the Porkka
XWEB offers real time temperature monitoring and alarm
notification, which can be integrated within an existing BMS
(Building Monitoring System). Browser facilities enable access
for holders with a username and password at several levels if
required. Information distribution to all relevant personnel is
also quick and easy.
Reduced operating costs Monitoring real time temperature data can give quick and
effective information on how a particular item of equipment
is being used. This in turn can allow the operator to control
the operation of the equipment more effectively and reduce
energy consumption. Maintenance personnel can also gain
valuable information from data, such as when servicing is
required. This also has the effect of reducing main component
failure which reduces overall running costs.
Intelligence = knowledge Porkka XWEB allows the operator to use the refrigeration
equipment being monitored more effectively which is better
for the environment. The system can, for example, record door
openings (for devices fitted with a door switch), defrost cycles
etc. This in turn can highlight critical points in the operation of
the equipment, for example, when doors are kept open for
too long when goods are being received. After training,
energy cost can be reduced.
Temperature range +2°C … +12°C +2°C … +12°C –2°C … + 5°C –2°C … + 5°C –22°C … –18°C –22°C … –18°C –22°C … –18°C
Volume < 12 m3 < 22 m3 < 12 m3 < 22 m3 < 11 m3 < 14 m3 < 22 m3
Connection power 0.72 kW 0.96 kW 1.11 kW 1.51 kW 1.33 kW 1.76 kW 2.08 kW
Connection power RHDS * 0.84 kW 1.09 kW 1.24 kW 1.64 kW 1.45 kW 1.89 kW 2.18 kW
Fusing 1 x 10 A 1 x 10 A 1 x 10 A 1 x 16 A 1 x 16 A 1 x 16 A 3 x 10 A
Voltage 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 400 V / 50 Hz
Cooling effect (CC) 1 330 W 1 870 W 1 240 W 1 800 W 1 310 W 1 590 W 2 210 W
Evaporating temperature (CC) –8°C –8°C –10°C –10°C –30°C –30°C –30°C
Ambient temperature +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C +5°C … +32°C
Refrigerant R 404a R 404a R 404a R 404a
Machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 55 dB ( A ) 58 dB ( A ) 59 dB ( A )
RHDS machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 51 dB ( A ) 54 dB ( A ) 55 dB ( A )
RHDS fluid condenser RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 2 x RHDS 2160
Fluid condenser acoustic pressure at location 10m ( dB re 20 µPa ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 37 dB ( A )
Permitted temperature range at fluid condenser location –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C
Note: If there is a lack of ventilation or ambient temperatures are likely to remain above or below recommended levels for considerable periods of time please contact us for solutions. *Includes RHDS fluid condenser (E) = Available with R290 refrigerant (1.1.2012)
C950 C1240 M950 M1240 F850 F1140 F1540
Porkka refrigeration unit technical data
Machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 53 dB ( A ) 55 dB ( A ) 58 dB ( A ) 59 dB ( A )
RHDS machine element acoustic pressure 1m / 1,5 m ( dB re 20 µPa ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 49 dB ( A ) 51 dB ( A ) 54 dB ( A ) 55 dB ( A )
RHDS fluid condenser RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 RHDS 2140 RHDS 2160 2 x RHDS 2160
Fluid condenser acoustic pressure at location 10m ( dB re 20 µPa ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 34 dB ( A ) 37 dB ( A )
Permitted temperature range at fluid condenser location –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C –40°C … +35°C
C940 C1240 M940 M1240 F840 F1140 F1540
Depth
3,7 B **
4,2 B **
4,8 B** 5,9 B** 6,9 A** 8,9 A 10,1 A 11,2 A 12,3 A 8,0 A**
4,3 B **
5,5 B** 6,7 B** 8,0 B** 10,4 A 11,6 A 12,9 A 14,2 A 9,0 A
4,9 B **
14,9 A
5,4 B **
16,4 B
18,0 B
12,9 B
1,7 B** 2,6 B **
2,9 B **
3,5 A** 4,0 A** 4,8 A** 6,1 A** 7,0 A** 5,5 A**
1,4 B*/** 1,8 A */**
2,3 A */**
2,6 A*/** 3,1 A*/** 3,7 A*/** 4,9 A*/** 5,4 A*/**4,3 A*/**
2,2 B** 3,1 B **
3,6 B **
4,0 B** 5,0 A** 5,9 A** 7,6 A** 8,5 A 9,5 A 10,3 A6,7 A**
**Special shelf layout, height 2400mm
9,5 A** 10,3 A**
Depth 900 Depth 1200 Depth 1350 Depth 1500 Depth 1800 Depth 2100 Depth 2400 Depth 2700 Depth 3000 Depth 3300 Depth 3600
Width 1800
Width 2100
Width 2400
Width 2700
Width 3000
Width 3300
Width 3600
Width 1350
Width 1500
Width 1200 1,4 B* 1,8 A* 2,3 A* 2,6 A* 3,1 A* 3,7 A* 4,9 A* 5,4 A* 4,3 A*
1,6 B* 2,3 B* 2,9 A* 3,6 A* 4,2 A*
1,7 B* 2,6 B 2,9 B 3,5 A 4,0 A 4,8 A 6,1 A 7,0 A 5,5 A
2,2 B* 3,1 B 3,6 B 4,0 B 5,0 A 5,9 A 7,6 A 8,5 A 9,5 A** 10,3 A**6,7 A
3,7 B 4,2 B 4,8 B 5,9 B 6,9 A 8,9 A 10,1 A 11,2 A 12,3 A 8,0 A
4,3 B 5,5 B 6,7 B 8,0 B 10,4 A 11,6 A 12,9 A 14,2 A 9,0 A
4,9 B 6,1 B 7,6 B 8,9 B 11,8 A 13,3 A 14,7 A 16,0 A 10,4 B
5,4 B 7,0 B 8,5 B 10,1 B 13,3 B 14,9 A 16,4 A 18,0 A 11,6 B
9,5 B 11,2 B 14,7 B 16,4 B 12,9 B
10,3 B 12,3 B 16,0 B 18,0 B 14,2 B
18,0 A
13,3 A
*Available only in 80mm insulation thickness **Available with R290 refrigerant
Height 2100 or 2400mm (80mm insulation thickness) Height 2140 or 2440mm (100mm insulation thickness)
The Porkka RHDS unit is equipped with
a refrigerant-to-liquid heat exchanger.
to the water solution where it is
circulated to the condenser where the
heat is given up to the ambient air.
When placing Porkka modular rooms within a building, lack of
ventilation can cause heat to build up and increase running costs. The
solution is to use the Porkka Remote Heat Disposal System. Porkka’s
RHDS offers an easy and inexpensive method of transferring waste
heat produced by the refrigeration systems to either an external area
or an area where the warm air could be utilised. It is easy and quick to
install, with the additional benefit of being much quieter than fitting a
conventional condensing unit.
The RHDS system is similar to the standard Porkka unit with the
addition of a liquid condenser, header tank and pump. Water pipes are
then connected from the remote condenser to the refrigeration unit.
After connecting the system it is filled with a water glycol solution that
will operate in both summer and winter conditions. The multi-fix
condenser can be positioned either within an area that will benefit
from heat input or externally. The unit can be floor or wall mounted. In
addition the equipment benefits the environment by utilising a very
small refrigerant charge and reducing running costs.
Installation of the equipment is quick and easy and can be undertaken
by competent installers that do not necessarily have to be qualified
refrigeration engineers, though they are recommended. The RHDS can
be used throughout our standard range of rooms and at all
temperatures i.e. chilled, medium or freezer versions. For a standard
installation, a pipe can be run as much as 25 meters horizontally with
a maximum vertical lift of 4.5 meters within the run, the height of
which is measured from the pump within the refrigeration unit.
The RHDS system is efficient, silent and environment-friendly. Makes system surveillance easy, guides to energy efficient usage...
7. Manual defrost button
9. Light switch button with light to indicate ON mode
10. ON/OFF Stand-by mode button
11. Humidity control button
12. Probe display button
*Available only in 80mm insulation thickness **Available with R290 refrigerant
R 404a (C940) R 290 (C950)
R 404a (M940) R 290 (M950)
R 404a (F840) R 290 (F850)
EM A
DE SI
G N
2
Porkka Finland Oy Soisalmentie 3 FI-15860 Hollola, Finland Tel. +358 20 5555 12 Fax +358 20 5555 497 e-mail: porkka@huurre.com
Porkka Scandinavia AB Industrigatan 21 S-61933 Trosa, Sverige Hertfordshire, WD 18 9RG, UK Tel. +46 156 348 40 Fax +46 156 167 50 e-post: porkka@porkka.se www.porkka.se
where environment impact in production is kept to a minimum.
marked products. The manufacturer through continuous research and development reserves the right to change
Porkka Finland Oy reserves the right to make any changes without prior notice.
Porkka Finland Oy is an internationally recognised designer and manufacturer of Refrigeration and Food Storage/Display Equipment. The range incorporates Chilled, Frozen and Heated options. Major clients include commercial kitchens, restaurants, fast food outlets, hotels, industrial canteens, hospitals, laboratories and retailers throughout the World.
Our main markets outside of Finland include Scandinavia