TWO SALES • TWO DAYS • TWO LOUISIANA CITIESSALE ONE FEATURING: Positioners, Headstocks, Manipulators, Turning Roll Sets, Ironworkers, Saws, Huge Quantity Welding Machines Incl. Lincoln Severe

Duty Diesel Welders, Large Quantity of Shop Tools, Rough Terrain Crane, Truck Tractors, Trailers, Dump Trucks, Pick-Up Trucks, Passenger Vans, High Lift & Conventional Forklifts, Front End Loader, Air Compressors, Portable Compressors, Golf Carts, Storage Racks, Tool Boxes, Much More!

SALE TWO FEATURING: Aircraft Parts Manufacturing Plant Incl.: CNC & Manual Machine Tools, Stamping & Fabricating Equipment Incl. CNC Laser, 800 T. Hydraulic Press, Autoclaves, Drop Hammers, Metal Shrinker, Saws, Hardness Tester, Plating Equipment, Painting Equipment, Drop Bottom Furnace,

Blast Machine, Material Handling Equipment, More.

Assets Located at the Former Facility of

TTF, LLC1400 Mills HighwayBREAUX BRIDGE,

LA 70517(See Directions on Back Page)

SALE TWO

AUCTION: WED., FEB. 4 • 10:00 A.M.

INSPECTION: Mon. & Tues., Feb. 2 & 3 9:00 A.M. to

4:00 P.M. & Morning of Sale

Read Partial

Terms and Conditions on Back Page of

Brochure GM ELECTRIC-FIRED DROP BOTTOM BOX FURNACE

<LAKE ERIE 800 T. 4-POST HYDRAULIC PRESS

AUCTIONS

BUYER’S PREMIUM:15% ONSITE • 18% WEBCASTOn-Site Bidding in New Iberia & Breaux Bridge, LA or Bid Via Webcast at

RED ROCK 10' X 10' MANIPULATOR

2012 DUAL

HEADS

FAX: (713) 672-7905

1304 Langham Creek Drive, Suite 454, Houston, Texas 77084

E-MAIL: pmi@pmi-auction.com • WEBSITE: www.pmi-auction.comRonald G. Moore, LA LIC. #851 • PMI, LA LIC. #AB-396

HOUSTON • DALLAS • ST. LOUIS

PHONE: (713) 691-4401

Sale Conducted By:

105 Revere Drive, Suite CNorthbrook, IL 60062www.pplauction.com

Phone: 224-927-5320 | Fax: 224-927-5311

In Conjunction With:

INSPECTION: Monday, February 2 9:00 A.M. to 4:00 P.M.

& Morning of Sale

Assets Located at the Former Facility of

NEW CENTURY FAB., INC.

2904 West Old Spanish Trail

NEW IBERIA, LA 70560(See Directions on Back Page)

SALE ONE

AUCTION:TUESDAY

FEBRUARY 3 10:00 A.M.

LINCOLN SEVERE DUTY DIESEL-POWERED WELDERS

TAYLOR 30,000 LB. CAP. DIESEL FORKLIFT

2008–201211AVAILABLE

2 3

RED ROCK 20 T. POWER TURNING ROLL SET

MILLER TRAILBLAZER 302 GAS-POWERED WELDER

WELDING MANIPULATORSRED ROCK MDL. MM3030-FM-NE-DC, new 2012, 10' x 10' cap., slab base, manual column rotation, S/N RR0601, Lincoln DC-1000 welding power supply, Lincoln sub-arc welding head, Lincoln NA-3N sub-arc weld control system, Weld Engineering flux handling system, Cypress Engineering Mdl. CB-3H rotary cutting head w/servo controlled oxy. fuel cutting torch, S/N C011315.RANSOME 6' X 6' SUBARC WELDING MANIPULATOR, motorized car base, Miller 1,000 amp power supply w/track, S/N N/A.HOBART 4' X 4' WELDING MANIPULATOR.

WELDING TURNING ROLLSRED ROCK 40 T. CAP. POWER AND IDLER SET, new 2012, Mdl. RWPP-40-60, 8" x 20" dbl. rubber tires w/overload discs, S/N RR0016-0102.(2) RED ROCK 20 T. CAP. POWER AND IDLER SETS, new 2012, Mdl. RWPP, matching idler, 10" x 12-1/2" dbl. rubber tires w/overload discs.ARONSON 20,000 LB. CAP. POWER ROLL, Mdl. WSW20RC-TR, steel wheels, S/N 79164.10 T. CAP. MATCHED PAIR IDLER ROLLS w/rubber tires and overload discs.5 T. CAP. MATCHED PAIR IDLER ROLLS.

WELDING POSITIONERSCUSTOM APPROX. 2,000 LB. CAP., manual gear tilt, variable spd. rotation, 32" rd. platen, 15-1/2" dia. 3-jaw chuck, skid frame mtd.PANDJIRIS APPROX. 1,500 LB. CAP., manual tilt, variable spd. rotation, 24" sq. platen, 16" dia. 3-jaw chuck.(4) CUSTOM ROTARY PIPE POSITIONERS, 16" dia. 3-jaw chuck, post mount, variable spd., foot pedal control.

SEVERE DUTY DIESEL WELDING MACHINES(2) LINCOLN MDL. SAE-500, as new as 2012, 500 amps @ 40 v., 60% duty cycle, stainless steel shroud, galvanized frame, offshore rated fabricated and galvanized handling frame, diesel engine, S/N C112 1102114 (2012), S/N C1110400005 (2010).(9) LINCOLN MDL. SAE-400, as new as 2008, 400 amps @ 40 v., 100% duty cycle, stainless steel shroud, galvanized steel offshore rated frame, diesel engine, S/N C1070600031 (2007), S/N C1070600029 (2007), S/N C1070600034 (2007), S/N C1081000005 (2008), S/N C1081000007 (2008), S/N C1080300027 (2008), S/N C1080300028 (2008), S/N C1080300018 (2008), S/N C1081000004, no offshore frame, (2008).

PORTABLE GAS WELDING MACHINESMILLER TRAILBLAZER MDL. 302, new 2007, 275 amps @ 25 v., 100% duty cycle DC, gasoline engine, 10.5 kW generator output, S/N LH41 0096Q.LINCOLN RANGER MDL. 250GXT, new 2013, 250 amps @ 25 v., 100% duty cycle, gasoline engine, 11,000 watt peak aux. pwr., frame mtd. w/ toolbox and accessories, S/N U1131006627.REDIARC MDL. DX300 PORTABLE, 250 amps @ 30 v., 100% duty cycle, 10,000 watt max. AC volt output, diesel engine.

>CUSTOM-BUILT

WELDING POSITIONER

<RED ROCK 10' X 10' MANIPULATOR <

LINCOLN SAE-500 AND SAE-400 DIESEL POWERED WELDERS

<PANDJIRIS WELDING POSITIONER

SALE ONEAssets Located at the Former Facility of

NEW CENTURY FABRICATORS, INC.2904 West Old Spanish Trail

NEW IBERIA, LOUISIANA 70560(See Directions on Back Page)

2012

AS NEW AS2012

2007

DUAL

HEADS

11

AVAILABLE

2AVAILABLE

2012

2 3

MILLER XMT-304 INVERTER MIG WELDERS

LINCOLN POWER MIG INTEGRATED MIG WELDERS

LINCOLN IDEALARC DC-600 POWER SUPPLIES

LINCOLN INVERTEC V-350 PRO INVERTER MIG WELDERS

TIG WELDERMILLER SYNCROWAVE MDL. 351, 350 amps @ 34 v., 40% duty cycle, TIG torch, S/N KH460629.

INTEGRATED MIG WELDERSLINCOLN POWERMIG MDL. 300, 300 amps @ 32 v., 40% duty cycle, S/N U1011005074.(5) LINCOLN POWERMIG MDL. 256, as new as 2010, 250 amps @ 26 v., 40% duty cycle, S/N M3110908804, S/N M3110810140, S/N M3130500175, S/N M3110908896, S/N M3110710120.(2) LINCOLN POWERMIG MDL. 255, as new as 2008, 250 amps @ 26 v., 40% duty cycle, S/N U1080207748, S/N U1030211673.(2) MILLER MILLERMATIC MDL. 252, new 2013 and 2011, 200 amps @ 28 v., 60% duty cycle, MIG gun and running gear, S/N MB240335N, S/N MD281808N.MILLER MILLERMATIC MDL. 251, 200 amps @ 28 v., 60% duty cycle, MIG gun and running gear, S/N LE128330.MILLER MILLERMATIC MDL. 250, 200 amps @ 28 v., 60% duty cycle, MIG gun and running gear, S/N KH343511.

INVERTER TYPE MIG WELDERS(10) LINCOLN INVERTEC MDL. V350PRO, as new as 2006, 350 amps @ 34 v., 60% duty cycle, Mdl. LF72 variable wire feeder, Lincoln portable welding cart, MIG gun and leads, S/N U1050627128, S/N U1060513196, S/N U1050128988, S/N U1051211758, S/N U10308892, S/N U105120369, S/N U1060603718, S/N U1060411348, S/N U1040305012, S/N U1051120352.(4) MILLER MDL. XMT304, as new as 2007, 300 amps @ 32 v., 60% duty cycle, Miller Mdl. 22A variable wire feeder, S/N KG260863, S/N LF124445, S/N LH250493A, S/N LF124450.

WELDING POWER SUPPLIES(2) LINCOLN IDEALARC MDL. DC600, as new as 2010, 750 amps @ 44 v., 50% duty cycle, 600 amps @ 44 v., 100% duty cycle, S/N U1110906135 (2011), S/N U1980517351.LINCOLN MDL. CV-655, 650 amps @ 44 v., 100% duty cycle, S/N N/A.MILLER DELTAWELD MDL. 652, 650 amps @ 44 v., 100% duty cycle, Lincoln Mdl. LF72 variable spd. wire feeder, S/N KG259199.(2) MILLER DELTAWELD MDL. 450, 450 amps @ 38 v., 100% duty cycle, S/N JA451760, S/N JB497706.(5) LINCOLN MDL. CV300, as new as 2003, 400 amps @ 37 v., 60% duty cycle, S/N U1981111702 (1998), S/N U1980805083, S/N U1030911045, S/N U1980805091, S/N U1030916479.MILLER CP-300, 300 amps @ 30 v., S/N N/A.MILLER DIALARC MDL. 250, 250 amps @ 30 v., 30% duty cycle, S/N KG066736.

MISCELLANEOUS FABRICATING EQUIPMENTIRONCRAFTER 50 T. CAP. HYDRAULIC IRONWORKER, Mdl. 50/50, sgl. cut angle shear, punch end, bar shear, 3/4" x 8" flatbar cap., 4" x 4" x 3/8" angle cap., 1-3/8" rd. shear cap., S/N 81F171.HAWTHORN HYDRAULIC IRONWORKER, angle shear, flat shear, coper and punch end.RIDGID 2" MDL. 1822-1 PIPE THREADER, cut-off and reamer, on fabricated stand, S/N N/A.JET HORIZONTAL BANDSAW, 9" rd. cap., 9" x 16" rect. cap., 1" blade, 1-1/2 HP drive motor.MITERING TYPE HORIZONTAL BANDSAW, 1" dia. blade, approx. 10" rd. cap., gear motor drive.KNUTH MDL. VB360 VERTICAL BANDSAW, new 2005, 14" throat depth, 9" max. cutting height, blade welder and grinder, variable blade spds., S/N B362572.

>RIDGID

PIPE THREADER

<IRONCRAFTER 50 T. CAP. HYDRAULIC IRONWORKER

JET 9" X 6" HORIZONTAL BANDSAW

AUCTION

AS NEW AS

2007

AS NEW AS2010

AS NEW AS2006

AS NEW AS2010

4AVAILABLE

10AVAILABLE

4 5

QUINCY 200 HP ROTARY SCREW AIR COMPRESSOR

INGERSOLL RAND DIESEL POWERED AIR COMPRESSORS

SANDBLAST TANK

PORTABLE DIESEL COMPRESSORS(7) INGERSOLL RAND MDL. XP185, new 2007 thru 2009, Doosan diesel engine, S/N 405250UJS222, S/N 389639UGR222, S/N 389632UGP222, S/N 389640UGR222, S/N 405248UJS222, S/N 405249UJS222, S/N N/A.

STATIONARY AIR COMPRESSORSQUINCY MDL. OSI7307ANA ROTARY SCREW TYPE, 200 HP motor, air cooled, skid mtd., S/N 310.QUINCY MDL. QSF200-100 ROTARY SCREW TYPE, 200 HP motor, air cooled, skid mtd. (Note: missing motor).GARDNER DENVER ROTARY SCREW TYPE, 50 HP motor, air cooled, skid mtd., S/N N/A.INGERSOLL RAND, S/N 389637UGR222.QUINCY MDL. M0R325ST5HP RECIPROCATING TYPE, 5 HP motor, on 90 gal. tank.

AIR RECEIVER TANKS(3) 1,000 GAL. CAP., fabricated steel frame.300 GAL. CAP.

OFFSHORE ACCUMULATOR TANKS(10) APPROX. 200 GAL. CAP., fabricated frame, crane handling attachs., skid mtd., most have (8) outlets w/ball valves and (2) inlets, bottom drain, forklift entry.

OFFSHORE BOTTLE RACKS(24) 18/4, 5,000 lb. cap. empty weight, new 2013, last certified 2013, heavy fabricated steel construction, crane handling attachs., straps, forklift entry.

SANDBLAST EQUIPMENTMARCO SANDBLAST TANK, new 2012, 150 PSI @ 50 deg. F. max. allowable working pressure, heat exchanger, fabricated skid frame, multiple outlets, S/N M95-183; 5,000 LB. CAP. SANDBLAST TANK, fabricated steel frame, valves and outlets; 5,000 LB. CAP. SANDBLAST TANK, valves and accumulator, skid mtd.; HUGH QTY. OF SANDBLAST HOSE AND FITTINGS; (2) PORTABLE SCHMIDT SANDBLAST POTS, as new as 2012, 150 PSI, wheeled base, S/N 24L8716 (2012), S/N 24L-8304 (2011); (2) PORTABLE UNKNOWN MFG. SANDBLAST POTS, 250 lb. cap. pots, valves and wheels; KINJET PRESSURE BLASTER, fabricated frame, blast gun, cart base, air pwrd., Unit No. 3000-03.

SAND STORAGE SILOAPPROX. 10,000 LB. CAP., gate valve bottom, clean out top vent, heavy tubular fabricated frame, access ladder.

OFFSHORE TOOLBOXES(16) 10' x 8' x 8', (4) 10' x 7' x 6', (2) 9' x 7' x 6', (2) 8' x 6' x 6', (2) 6' x 6' x 5', (4) 4' x 5' x 6', heavy fabricated steel design, dbl. door entry, most are outfitted for rigging and fabrication tool storage; skid frame base, forklift entry, overhead handling ears, most were last certified 2013.

OFFSHORE WIRE BASKETS(3) 8' x 16' x 3', (1) 5' x 10'-6" x 3', (3) 5' x 8' x 3', (2) 5' x 5' x 3', (14) 4' x 8' x 3', (1) 4' x 8' x 2', (2) 3' x 8' x 3', 5,000 lb. load cap., galvanized or painted steel construction.

OFFSHORE PIPE TRANSPORT RACKS(2) 42" W. X 18" HT. X 42' L. w/ lifting ears.

PORTABLE TOOL STORAGE BOXESOVER (40) H.D. STEEL CONSTRUCTION w/handling lugs, forklift entry, sizes up to 3' x 3' x 5'.

MARCO SANDBLAST TANK VIEW OF OFFSHORE ACCUMULATOR TANKS 4' X 5' X 6' OFFSHORE TOOL BOXES

SALE ONE

AUCTION: TUESDAY, FEBRUARY 3 • 10:00 A.M.

On-Site Bidding in New Iberia, Louisiana or Bid Via Webcast at

AS NEW AS2009

NEW

20124

AVAILABLE

4 5TOOL BALANCERS COMBINATION WRENCHES

PNEUMATIC IMPACT WRENCHES AND HAMMER WRENCHES RIDGID PIPE WRENCHES

PORTABLE OFFICE TRAILER

<FABRICATED STEEL MATERIAL RACKS

>OFFSHORE

WIRE TRANSPORT

BASKETS

VIEW OF VARIOUS SIZE OFFSHORE TOOL BOXES

OFFSHORE SKID TRANSPORT FRAMES(2) 41" W. X 120" L. INTERIOR DIMS., 40" ht. to handling ear.(2) 40" W. X 12' L. INTERIOR DIMS., 56" ht. to lifting eye.

MISCELLANEOUS YARD EQUIPMENTOLYMPIC CRANE 2 T. X 17'-8" SPAN FREE STANDING CRANE SYSTEM, center drive, pendant control, Coffing 2 T. elec. chain hoist, 66'L. runway beams w/rails; (3) 40' L. CONNEX SHIPPING CONTAINERS; (3) 20' L. CONNEX SHIPPING CONTAINERS arranged as tool storage facility w/welded shelving and rear man entry door; 15' W. X 36' L. FREESTANDING OPEN SIDE SHED, 10' eave height, fabricated frame construction; 15' W. X 20' L. FREESTANDING OPEN SIDE SHED, approx. 12' eave clear height; 8' X 42' OFFICE TRAILER, air cond., aluminum staircase; ASSORTED STEEL OFFICE SHEDS; (2) APPROX. 1,000 GAL. CAP. LIQUID TRANSPORT TANKS, stainless steel construction, bottom drain ball valve; 2-CYLINDER CAP. YARD BOTTLE RACKS, crane handling; LARGE ASSORTMENT OF HEAVY STEEL WELDING TABLES w/vises and assorted hardware; WALK BOARDS, in 12" and 18" widths, 500 lb. cap., up to 20' L.

HYDROTEST BLIND FLANGESHUGE QTY. UP TO 25" DIA., tremendous assortment of bolt patterns, as-sorted fittings.

HUGE ASSORTMENT OF HAND & POWER TOOLS

SLEDGE HAMMERS; SOFT FACE HAMMERS; DEAD BLOW HAMMERS; DOZ-ENS OF RIDGID PIPE WRENCHES up to 48"; BOLT CUTTERS; SOCKET SETS; 100'S OF IMPACT SOCKETS up to 2-9/16"; SOCKET EXTENSIONS; 100'S OF HAMMER WRENCHES; INGERSOLL RAND & JET PNEUMATIC IMPACT WRENCHES up to 1" drive; 100'S OF COMBINATION WRENCHES BY PROTO, ARMSTRONG, CRAFTSMAN AND OTHERS up to 3"; 1,000'S OF FT. OF H.D. EXTENSION CORDS; DOZENS OF DEWALT 8" H.D. ELECTRIC RIGHT ANGLE GRINDERS; DOZENS OF HALOGEN STAND LAMPS; DOZENS OF JET AND

COFFING BEAM CLAMPS; DOZENS OF JET, CM AND HARRINGTON CHAIN FALLS up to 3 T. cap.; DOZENS OF JET AND CM COME-ALONGS up to 3 T. cap.; (6) INGERSOLL RAND AIR WENCHES; 100'S OF FT. OF CHAIN OF ALL SIZES; DOZENS OF JOHNSON, JET AND CROSBY LIFTING BLOCKS; 100'S OF SHACKLES up to 50 T. cap.; DOZENS OF WIRE ROPE COME-ALONGS; 100'S OF NYLON STRAPS of all lengths and capacities; WIDE SELECTION OF CHERNE PNEUMATIC PIPE PLUGS; H.D. TOOL COUNTER BALANCES; DOZ-ENS OF SAFETY HARNESSES AND SAFETY STRAPS; FIRE EXTINGUISH-ERS; OFFSHORE FLOTATION SAFETY DEVICES; 1,000 OF FT. OF OXY./ACY. HOSE; 1,000 OF FT. OF WELDING LEADS; (20) RIDGID NO. 460 PIPE STANDS; (30) KEEF MDL. KT50 ELECTRIC ROD BOXES; (2) KEEF MDL. K200 ELECTRIC ROD BOXES; FLOOR CIRCULATION FANS; (15) 18" CIRCU-LATOR FANS; (8) DUTCH WAYCOOL PORTABLE COOLER UNITS; MONARCH GASOLINE TRASH PUMP; (4) PNEUMATIC DIAPHRAGM PUMPS.

>18/4 OFFSHORE BOTTLE RACKS

<2 T. OVERHEAD BRIDGE CRANE SYSTEM

24AVAILABLE

2013

6 7CLARK 10,000 LB. CAP. DIESEL FORKLIFT

TAYLOR 30,000 LB. CAP. DIESEL FORKLIFT

TCM 5,000 LB. CAP. GASOLINE FORKLIFT

HYDRAULIC ROUGH TERRAIN CRANETADANO 30 T. CAP. MDL. TR-300XL, inspected 10/10/2014, Mitsubishi 6D16-TLEA diesel engine, Tadano digital load monitor, 4-section hyd. boom w/swing-away jib, 30 T. main hoist cap., 7-1/2 T. aux. hoist cap., 100' main hoist boom length, S/N 530480.

FORKLIFTSTAYLOR 30,000 LB. CAP. MDL. TE300M FORKLIFT, Cummins diesel, 30,000 lb. cap. @ 24" load center, 13' lift, 140" lowered mast, 92" forks, 1200 x 20 tires, power shift trans-mission, 5,190 hours on meter, S/N 23961.TAYLOR 25,000 LB. CAP. MDL. Y25WO, 12' 2-stage mast, 180" max. lift height, diesel fuel, pneumatic tires, 8' forks, S/N 13036.CLARK MDL. C500-YS100 FORKLIFT, diesel engine, 9,350 lb. @ 24" L.C., 168" max. lift, side-shift, 72" L. forks, large front cushion tires, S/N Y685-0008-5960FA.TCM MDL. FHD25Z5T, 5,000 lb. load cap., gasoline engine, 71" max. lift ht., side-shift, 60" forks, S/N 34E12035.

ROLLING STOCKCHEVROLET 3500 FLATBED PICKUP TRUCK, new 2006, Duramax diesel engine, Alison auto. trans., 94" W. x 132" L. diamond plate steel bed w/stake pockets and rub rails, hide away gooseneck trailer ball, (2) aluminum, underbed toolboxes, BNW Tow-N-Stow 3-way trailer hitch, Odo.: 149,213 miles, LA License No. X778916, VIN 1GBJC34D27E120636.

GMC SIERRA PICKUP TRUCK, new 2005, short bed, crew cab, Odo.: 216,000 miles, LA License No. W317416, VIN 2GTEC13T151320495.

GMC 2500HD SIERRA PICKUP TRUCK, new 2003, Vortex gasoline engine, king cab, Odo.: 151,000 miles, LA License No. B806663, VIN 1GTHC29U54E193234.

FORD F250 “SUPER DUTY” 4X4 PICKUP TRUCK, new 2002, Triton V8 engine, extended cab, full length bed, LA License No. X368831, VIN 1FTNX21L52EC28345.

FORD F250 “SUPER DUTY” PICKUP TRUCK, Triton V8 gasoline engine, king cab, full length bed, Odo.: 260,000 miles, LA License No. B988714, VIN N.A.

GMC SIERRA PICKUP TRUCK, crew cab, short bed, Odo.: N.A., LA License No. W317417, VIN 2GTFC13T351316Z.

(2) FORD E350 XLT “SUPER DUTY” 15-PAS-SENGER VANS, new 2007, VIN 1FBSS31LX-7DA54491 w/Odo.: 284,000 miles, LA License No. A699040, VIN 1FBSS31L58DA63553 w/Odo.: 249,000 miles, LA License No. B668931.

TOYOTA 4-RUNNER LIMITED SPORT UTILITY VEHICLE, new 2009, sunroof, leather interior, navigation system, satellite radio, Odo.: 86,000 miles, LA License No. A699042, VIN JTEZU-5JR4A5003084.

FRONT END LOADER

CASE MDL. 570LXT, front mtd. bucket, rear mtd. drag blade box w/ripper tines, 3-pt. rear hitch, S/N JJG0223424.

ROUGH TERRAIN FORKLIFTS

(3) GEHL 6,600 LB. CAP. MDL. RS6-XR42 ROUGH TERRAIN TELESCOPING TYPE FORK-LIFT, diesel engine, 42' max. reach extension, 13.00-24TG rough terrain tires, 3,221 H.O.M., S/N RS642GX1213955, S/N RS6 4 2 J W 0813992, S/N N/A.

TAYLOR 25,000 LB. CAP. DIESEL FORKLIFT

INSPECTION: Mon., Feb. 2, 9:00 A.M. to 4:00 P.M. & Morning of Sale

100'

BOOM

6 7FORD E-350 15-PASSENGER VANS

EAGLE DIESEL TRUCK TRACTOR

CHEVROLET 3500 FLAT BED PICK-UP TRUCK

GMC 2500 HD SIERRA PICK-UP TRUCK

TOYOTA 4-RUNNER SPORT UTILITY VEHICLE CARRY-ON CARGO TRAILER

TEXAS BRAGG 20' GOOSENECK TRAILER

INTERNATIONAL DUMP TRUCK

DIESEL TRUCK TRACTOREAGLE MODEL 9200i 4X2, new 2000, 32,000 lb. G.V.W.R., sgl. axle, Eaton Fuller trans., sleeper cab, Odo.: 619,000 miles, LA License No. B991161, VIN 2HSCDAMN3YC079236.

DUMP TRUCKINTERNATIONAL DUMP TRUCK, 1982, hyd. dump bed, VIN 1HTAA17B4CHB23746, Louisiana Lic. #G004738.

TRAILERSWADE 51' L. TYPE WHT51FT STEP DECK TRAILER, new 2009, 80,000 lb. G.V.W.R., strap kit, 120" upper deck, 19-1/2" step, tandem axle, LA License No. L613641, VIN 1W9FH51239F28505.TEXAS BRAGG 20' L. GOOSENECK TRAILER, tandem axle, landing gear, 97-1/2" W. wood deck w/stake pockets and rub rails, LA License No. L361046, VIN UNTY2020CTWGN.RIM TRAIL FLATBED TRAILER, new 2005, tandem axle, tubular surround frame, 82-1/2" W. x 20' wood deck, drop down ramps, LA License No. L178515, VIN F2090511185.WORKHORSE 72" W. X 120" L HOPPER TRAILER, drop down tailgate, tandem axle, landing gear, LA License No. L648517.UNKNOWN MANUFACTURER TRAILER, sgl. axle, 60" W. x 120" L. wood deck, full width drop down tailgate/ramp, LA License No. E685960.

WELDING TRAILER, sgl. axle, landing gear, (2) bottle racks, (2) lockable tool storage boxes, size to fit Lincoln diesel welder, LA Li-cense No. E095793.(2) TRAILMASTERS WELDING TRAILERS, new 2001, 3,500 lb. G.V.W.R., sgl. axle, 5' x 10' wood bed, (3) bottle storage racks, (3) welding lead reels, eqpd. for weld-ing, LA License No. E888637, LA License No. E687434.CARRY-ON 5' X 8' X 5' CARGO TRAILER, new 2013, VIN 4YMCL0817DT010009.

ELECTRIC GOLF CARTS

EZ GO ROUGH TERRAIN, nobby tires, battery charger, rear seat.(2) EZ GO STANDARD.

SALE ONE

AUCTION:TUESDAY

FEBRUARY 310:00 A.M.

2009

20072013

2006

2AVAILABLE

WADE 51' STEP DECK TRAILER

2009

INSPECTION: Monday, February 2, 9:00 A.M. to 4:00 P.M. & Morning of Sale

Assets Located at the Former Facility of

NEW CENTURY FAB., INC.2904 West Old Spanish Trail

NEW IBERIA, LOUISIANA 70560(See Directions on Back Page)

2003

8 9

VIEW OF DROP HAMMERS AND MEZZANINE

>ROHR 3,000 LB.

ROPE DROP HAMMER

CLOSE UP OF PRESS CONTROLS

LAKE ERIE 800 T. 4-POST HYDRAULIC PRESS

ELMES HYDRAULIC PRESSPROGRESSIVE 500 T. HYDRAULIC PRESS

SALE TWOAssets Located at the Former Facility of

TTF, LLC1400 Mills Highway

BREAUX BRIDGE, LOUISIANA 70517(See Directions on Back Page)

AUCTION: WEDNESDAYFEBRUARY 4 • 10:00 A.M.

INSPECTION: Monday & Tuesday, February 2 & 3 9:00 A.M. to 4:00 P.M. & Morning of Sale

LAKE ERIE 800 T. CAP. 4-POST, 44" F-B x 96" R-L bed and ram area, 5" thk. full size upper and lower bolster w/provision for heating, light curtain safety device, 98" R-L x 20-1/2" tie rod space, approx. 26" stroke, top mtd. hyd. system, provision for steam heated platens, 28.5" ram dia., operator’s control pedestal, S/N N/A.PROGRESSIVE HYDRAULICS 500 T. CAP. SLAB FRAME, 52" F-B x 57" R-L. bed area, 36" F-B x 57" R-L ram area, 58-1/4" dist. btwn. uprights, toggle action hydraulics, top mtd. hyd. system, roller table feed, dual cyl. design, 8" x 14" pass through windows, S/N N/A.ELMES 500 T. CAP. 4-POST, 25-3/4" R-L x 38-1/2" F-B ram and bed area, approx. 14" stroke, 20" R-L x 9“ dist. btwn. posts, integral hyd. system w/20 HP drive motor and reservoir base, S/ J-7994.

CLOSE UP OF FURNACE CONTROLS

GM ELECTRIC-FIRED DROP BOTTOM BOX FURNACE

BOTTOM DROP HEAT TREAT FURNACEGM INDUSTRIES MDL. HT01, elec. fired, 4' x 4' x 6' work zone, 600 deg. to 1,100 deg. F operating range, ± 10 deg. F. tolerance, digital temp.

ROPE DROP HAMMERSROHR 3,000 LB. CAP., 48" x 65" bed, 36" x 48" slide area, 48" drop travel, heavy cast steel construction.ROHR 1,000 LB. CAP., 36" x 48" bed, 24" x 32" ram area, 42" drop travel, rope drive system.MEZZANINE AND ASSORTMENT OF HAMMER DIES FOR MILITARY AND COMMERCIAL AIRCRAFT APPLICATIONS.

HYDRAULIC PRESSES

8 9

CNC ROUTING MACHINEEKTROM-CARLSON, PC based CNC control system, 180" X-axis travel, 48" Y-axis travel, heavy fabricated frame construction, timing belt, bridge drive, approx. 3 kW unitized motor drive spndl., #40 quick change adapter.

ELECTRIC FIRED AUTOCLAVES(2) CUSTOM, 53-1/2" shell dia., 120" L. x 52" W. x 42" H. cap., controls and accessories.

MANUAL PLATING LINEMANUAL PLATING LINE, (6) approx. 48" x 96" carbon steel tanks w/rubber liners, associated pumps and filters; several plating racks w/overhead handling system; DYNAPOWER CORP. MDL. SD22-01500152-CKLX-6XXX RECTIFIER, 240 v. input, 15 v. output, 1,500 amp, digital control system, S/N 43953-001-001; HAYWARD PRO-GRID MDL. D.E CARTRIDGE FILTER w/cartridge holder; CM 600 LB. CAP. OVERHEAD HANDLING SYSTEM w/pwr. trolley and overhead rail; YALE 1/2 T. CAP. OVERHEAD HANDLING SYSTEM w/fabricated frame, (3) plating racks w/roller support stands.

See Online Catalog for Photos.

On-Site Bidding in Breaux Bridge, Louisiana or Bid Via Webcast at

ELECTRIC-FIRED AUTOCLAVES

INTERIOR OF AUTOCLAVE CYLINDER

CNC LASERCINCINNATI 5' X 10' MDL. CL-7, G.E. Fanuc 11M CNC control, auto. pallet change system, Rofinsinar Mdl. RS1200–1,200 watt resonator, spare CNC control and spare laser resonator, S/N 47069.

CNC

CNC VERTICAL MILLING MACHINES(2) LAGUNMATIC MDL. 320, 11" x 58" table, Delta 20 CNC control system, pwr. knee elevation, manual pulse coder, CAT-40 spndl. taper, S/N 30546, S/N 28827.

2AVAILABLE

CNC

CNC

10 11

<U.S. INDUSTRIAL WHEELING AND RAISING MACHINE

SHEET METAL MACHINERYU.S. INDUSTRIAL TOOL MDL. US1001 WHEELING AND RAISING MACHINE (ENGLISH WHEEL), 43" throat depth, roller stand, assorted rolls, S/N 11932.TM TECHNOLOGIES MDL. M-1 SHRINKING HAMMER, assorted mandrels and accessories, S/N B1158.CENTRAL MACHINERY SHEETMETAL BRAKE, roll and shear combination, 30" W. x 20 ga. max. material thickness, 5/32, 11/64 and 7/30 seconds wire forming grooves, lever operated shear, pressbrake and slip roll.

CNC HYDRO-MECHANICAL PRESSBRAKE

TRI-ACRO 72" X 14 GA. MDL. 35-6, 23.31 T. punching cap., autogauge CNC99 CNC backgauge, dual palm button controls, S/N 1338P.WIDE ARRAY OF PRESSBRAKE PUNCHES AND DIES (to be offered separately).

FOOT SHEAR

TENNSMITH 48" X 16 GA. MDL. 102-16 FOOT SHEAR, rear mtd. backgauge, S/N 1722

APRON BRAKETENNSMITH 16 GA. CAP. MDL. HB9716 APRON BRAKE, 96" overall bending length, S/N 17627.

SPOT WELDERSCIAKY MDL. RMC01STQ-75-36-10 PNEUMATIC PRESS TYPE, 75 KVA @ 50% duty cycle, 50,000 peak secondary amps, 10" x 40" throat, Sciaky solid state control system, foot pedal control, S/N 10082.

SALE TWO Assets Located at the Former Facility of

TTF, LLC1400 Mills HighwayBREAUX BRIDGE, LOUISIANA 70517

(See Directions on Back Page)

AUCTION: WEDNESDAYFEBRUARY 410:00 A.M.

DON’T MISS THIS SALE!

CNC

10 11

CARTRIDGE STYLE DUST COLLECTOR

DONALDSON TORIT MDL. DFT4-16, 4-compartment, 16-ele-ment, fabricated steel stand, controls, S/N TG92550/001.

MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENT

CANTILEVER RACK, modular construction, sgl. sided, 48" cantilever, (3) columns, spacers; ACME DRY TYPE TRANS-FORMER, 480 v. primary, 208/120 v. secondary, 30 KVA; TENSILE TESTER; HORIZONTAL CHEST TYPE FREEZER.

MISCELLANEOUS SHOP TOOLS

MILWAUKEE PANEL SAW, 2-1/2 HP motor, 66" x 144" frame; FUEL TANK on elevated fabricated frame w/fuel nozzle; (2) KURT 6" MILLING VISES; ASSORTMENT OF CAT-40 TAPER SPNDL. TOOLING; 2 PC. TABLE VISE SET.

JBI REAR-DRAFT SPRAY BOOTH JBI PAINT BOOTH AND VESTIBULE

REAR DRAFT SPRAY BOOTHJBI 118" W. X 72" DP. X 96" HT. REAR DRAFT SPRAY BOOTH, dry filter rear exhaust system, employs 20" sq. filters, JBI controls, galvanized panel construction, explosion proof fluorescent lighting, drying and preparation vestibule.(2) CUSTOM SPRAY BOOTHS, built with 20' connex shipping containers, sgl. end doors.

CURTIS 30 HP ROTARY SCREW AIR COMPRESSOR

APPLICATION ENGINEERING CHILLER UNIT

ROTARY SCREW AIR COMPRESSORSCURTIS TOLEDO MDL. RS30E-AE-E12, new 2006, 30 HP motor, 130 CFM @ 125 PSI, mtd. to 120 gal. tank, air cooled, S/N 03H060011, 120 gal. aux. receiver tank (offered separately).INGERSOLL RAND MDL. SSR125HAACC13F, 125 CFM, 35 HP motor, mtd. to 90 gal. tank, add’l. 80 gal. vert. air receiver, air cooled, S/N A2416U83B.AIRTEK REFRIGERATED AIR DRYER.

CHILLER UNITAPPLICATION ENGINEERING MDL. DLA-7-1/2-0, 55 deg. min. temp., S/N 89E047.

VACUUM SHEETLIFTERVACU-LIFT MDL. 3200-10-3-4, 10' L., 1,800 lb. max. cap., (6) vacuum cups, onboard vacuum pump, S/N 90-20-2140-1.

INSPECTION: Monday & Tuesday, February 2 & 3, 9:00 A.M. to 4:00 P.M.

& Morning of Sale

On-Site Bidding in Breaux Bridge, Louisiana or Bid Via

Webcast at

AUCTION

2006

QS-0024859

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

TWO SALES • TWO DAYSTWO LOUISIANA CITIES

SALE ONE FEATURING: Positioners, Headstocks, Manipulators, Turning Roll Sets, Ironworkers, Saws, Huge Quantity Welding Machines Incl. Lincoln Severe Duty Diesel Welders, Large Quantity of Shop Tools,

Rough Terrain Crane, Truck Tractors, Trailers, Dump Trucks, Pick-Up Trucks, Passenger Vans, High Lift &

Conventional Forklifts, Front End Loader, Air Compressors, Portable Compressors, Golf Carts,

Storage Racks, Tool Boxes, Much More!SALE TWO FEATURING: Aircraft Parts Manufacturing Plant Incl.: CNC & Manual Machine Tools, Stamping &

Fabricating Equipment Incl. CNC Laser, 800 T. Hydraulic Press, Autoclaves, Drop Hammers, Metal

Shrinker, Saws, Hardness Tester, Plating Equipment, Painting Equipment, Drop Bottom Furnace,

Blast Machine, Material Handling Equipment, More.

NEW IBERIA & BREAUX BRIDGE, LA

AUCTIONS

PUBLIC INVITED

SALE ONE: TUES., FEB. 3 • 10:00 A.M.

SALE TWO: WED., FEB. 4 • 10:00 A.M.

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

A 15% Buyer’s Premium Will Apply On-site. An 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.

Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until March 4, 2015.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.

Buyer agrees to accept assets purchased “AS IS,” WITH “ALL FAULTS” AND “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART

OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the infor-mation herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.These terms and conditions may be modified or supplemented by language in the catalog avail-able at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.

PARTIAL TERMS & CONDITIONS

UNABLE TO ATTEND?Bid on-line in real time at TO PARTICIPATE YOU MUST:

1. Register at www.BidSpotter.com. DO IT NOW. 2. Either wire transfer, or overnight delivery service a

cashier’s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery Inc. 1304 Langham Creek Drive, Suite 454, Houston, TX 77084 Wire transfer instructions can be found at pmi-auction.com

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.

If you need assistance, don’t hesitate to call (713) 691-4401. ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER’S PREMIUM.

SALE ONE DIRECTIONSFROM LAFAYETTE REGIONAL AIRPORT: Exit air-port using US-90 E. Proceed approx. 6 miles to the LA-182 ramp towards Cade/St. Martinvilla. Turn left onto E. Main St./LA-182 and proceed approx. 9-1/2 miles. LA-182 becomes W. Old Spanish Trail. Proceed to auction site on your left, 2904 W. Old Spanish Trail, New Iberia, LA 70560. Watch for auction signs.

SALE ONE LODGINGWINGATE BY WYNDHAM................. (337) 234-3700 702 East Kaliste Saloom Rd., Lafayette, LA 70508

HOLIDAY INN EXPRESS & SUITES ...(877) 410-6681 210 Kaliste Saloom Rd., Lafayette, LA 70508

LA QUINTA INN & SUITES ............... (337) 330-8081 104 Sweetland Blvd., Broussard, LA 70518

FINANCE YOUR AUCTION PURCHASE

Apply Online: www.AuctionLease.com

SALE TWO DIRECTIONSFROM LAFAYETTE REGIONAL AIRPORT: Exit airport using E. Pinhook Rd. Turn right onto Carmel Dr. /LA-94 and continue to follow LA-94 for approx. 4-1/2 miles. LA-94 turns into Mills Hwy. Proceed to auction site on the left, 1400 Mills Hwy., Breaux Bridge, LA, 70517.WINGATE BY WYNDHAM..................................... (337) 234-3700 702 East Kaliste Saloom Rd., Lafayette, LA 70508

HOLIDAY INN EXPRESS & SUITES ..................... (877) 410-6681 210 Kaliste Saloom Rd., Lafayette, LA 70508